2AX3PATL008RGB LED light with Remote

Item#: 33906167 Gaming Desk Ver. 01 11/11/20 Customer Service: 800-747-2660 1 Assembly Tips: Become familiar with the instructions and all parts. Make sure that all parts are in the box and in good condition. Assemble the product on the open flat carton or a rug to protect the product and your floor. Some heavy products need a second person to assist in the assembly. Use of power tools is not recommended. Consejos para armar: Familiarícese con las instrucciones y todas las piezas. Asegúrese de que todas las partes estén en la caja y en buenas condiciones. Arme el producto sobre la caja de cartón plana abierta o una alfombra para proteger el producto y su piso. Algunos productos pesados necesitan una segunda persona para ayudar a armarlos. No se recomienda el uso de herramientas eléctricas. Caution: Never let children climb on furniture or play with furniture. Do not place a weight heavier than the recommended load rating on the furniture surface. Use care when moving furniture. Furniture can tip over if moved improperly. Improper handling can result in cuts and lacerations. Do not install on sloping surface. Tenga cuidado al mover muebles. Los muebles pueden caerse si se mueven de manera incorrecta. No instale en una superficie en pendiente. ! Care Instructions: Use electrostatic dust cloths to clean furniture. Do not set hot or cold containers directly on the furniture surface. Instrucciones para el cuidado: Utilice paños de polvo electrostáticos para limpiar los muebles. No coloque recipientes calientes o fríos directamente sobre la superficie de los muebles. Precaución: Nunca deje que los niños suban sobre muebles o jueguen con los muebles. No coloque un peso que sea más pesado que la capacidad de carga recom- endada en la superficie del mueble. ! Power/Standby Press to turn remote on or switch to standby. At power on, remote will return to previous setting. Energía/En Espera Púlselo para encender el control remoto o pasar al modo de espera. Al encenderlo, el control remoto regresará a la configuración anterior. Mode +/- Switch to one of 22 dynamic modes or from static mode. Modo +/- Cambie a uno de los 22 modos dinámicos o del modo estático. Speed +/- Increase (+) or decrease (-) dynamic mode speed. Velocidad +/- Aumentar (+) o disminuir (-) la velocidad del modo dinámico. Color +/- Switch to static from dynamic mode or between static colors. Color +/- Cambie a estático desde el modo dinámico o entre colores. Bright +/- Switch to static from dynamic mode and increase or decrease brightness. Brillo +/- Cambie a estático desde el modo dinámico y aumente o disminuya el brillo. Static Colors Choose or change to one of 7 static colors. Colores Estáticos Elija o cambie a uno de los 7 colores estáticos. SPECIFICATIONS Dynamic Modes 22 Static Colors 7 PWM Grade 256 Brightness Levels 8 Speeds 6 Demo Modes 17 Voltage 5-24 VDC Peak Current 3x4A Average Current 3x2A Remote Frequency 433.92 mHz Operating Distance <26 ft. Demo Mode Modo de Demostración LED Remote Operation 2 1 2 2 3 4 5 6 3 1 1 A B C D E 6 22 2 1 1 1 1 Item Artículo Item Artículo Components Componentes Components Componentes Qty Cant. Qty Cant. Parts List/ Lista de Piezas 71 82 9 1 1/4*12mm 1/4*52mm O4*16mm 10 11 12 1 1 1 / 3 1 2 A x10 Use Allen wrench (D) to attach all bolts. Lay left leg (4) on the floor and attach and tighten crossbars (1, 2 and 3) with two bolts (A) each. Lay assembly with crossbars on the floor. Attach and tighten right leg (5) to crossbars (1, 2 and 3) with two bolts (A) each. Utilizar la llave Allen (D) para fijar todos los pernos. Coloque la pierna izquierda (4) en el suelo. Fije y aprieta los travesaños (1, 2 y 3) con dos pernos (A) cada uno. Coloque ensamblaje con barras transversales en el suelo. Fije y aprieta pierna derecha (5) a los travesaños (1, 2 y 3) con dos pernos (A) cada uno. Lay desktop upside down on a smooth surface. Place the frame from Step 1 on the desktop (6) and align the holes. Using the Allen wrench (D), attach but do not fully tighten the six bolts (B). Now working in a clockwise sequence tighten the bolts, making sure the frame fits flush against the desktop (6). Attach braces (8) with two bolts (A) each. Coloque el escritorio al revés sobre una superficie lisa. Coloque el marco del paso 1 en la parte superior del escritorio (6) y alinear los agujeros. Usando la llave Allen (D), fije pero no apriete completamente los cinco pernos (B). Ahora trabajando en una secuencia en el sentido de las agujas del reloj apretar los pernos, asegurándose de que el marco encaje en la parte superior del escritorio (6). Fije las abrazaderas (8) con dos pernos (A) cada una. . A x4 B x6 D 4 3 4 A x6 Lift the gaming desk upright as shown. Carefully press the USB hub assembly (12) into the opening until it sits flush with the desktop. Insert USB connector (12) into your laptop USB port. To power LEDS, insert USB connector from LEDs (1) into USB hub (12) or into your laptop USB port. Attach tray holder (11) with three screws (C) using a Phillips screwdriver. Slide tray (10) onto tray holder (11) as shown. Levante el escritorio de juego como se muestra. Presiona cuidadosamente el ensamblaje del concentrador USB (12) en la abertura hasta que quede a ras del escritorio. Inserte el conector USB (12) en el puerto USB de su portátil. Para encender los LEDs, inserte el conector USB de los LEDs (1) en el concentrador USB (12) o en el puerto USB de tu portátil. Coloque el soporte de la bandeja (11) con tres tornillos (C) con un destornillador Phillips. Deslice la bandeja (10) en el soporte de la bandeja (11). LED Remote C x3 Use Allen wrench (D) to attach and tighten all bolts. Attach the power strip tray (7) with four bolts (A). Attach the drink holder (9) with two bolts (A) on either side of the desk. Utilizar la llave Allen (D) para fijar y apretar todos los pernos. Coloque la bandeja de la regleta de alimentación (7) con cuatro pernos (A). Coloque el portavasos (9) con dos pernos (A) a cada lado del escritorio.…

Text truncated - open the document above for the full version.

Atlantic lne. Date: 71/04/2020 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AX3PATL008 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC lD above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C. 853(a). \y'y'here our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, lnc., still resides with Atlantic lnc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Hank LiTitle: Project Manager Signature: On behalf of Company: Atlantic lnc. Telephone: (562) 903-9550 ext. 241 E-mail: Hank. [email protected] r

Atlantic lnc. To SGS North America lnc. 620 Old Peachtree Road SUITE 1OO Suwanee, Georgia United States From: Atlantic lnc. 10018 Santa Fe Springs Road Santa Fe Springs California 90670 United States Regarding: Confidentiality Request regarding application lor FCC lD: 2AX3PATL00B LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential untilthe device is marketed or 30 days from the grant date, whichever is less. lf the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos lnternal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Hank Li Title: Project Manager Signature On behalf of Company: Atlantic lnc. Telephone: (562) 903-9550 ext. 241 E-mail: Hank. [email protected]

SGS North America lnc. 620 Old Peachtree Road SUITE 1OO Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Atlantic Inc. Address 10018 Santa Fe Springs Road Santa Fe Springs California 90670 United States Grantee Code 2AX3P FCC ID 2AX3PATLOO8 Authorized Contact Name Hank Li Contact Email Hank. [email protected] Contact Phone(562) 903-9550 ext.241 l, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.91 1(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC lD as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. d) in accordance with 47 CFR 2.909 and KD8394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with lSOl 7065, FCC KDB641 1 63, FCC KD8610077, KDB39432 t and RSP-1 00, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant sha/l, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. $862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a "party" for these purposes. S) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, lnc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.qov/wireless/bureau-divisions/technoloqies-svstems-and-innovation-division/rules-requlations{itle-47 Link to KDBs: https://apps.fcc.qov/oetcf/kdb/index.cfm Link to RSP-100: Applicant Declaration t Date7110412020 Applicant Signature: Print Name: Hank Li Title -NOTE: This declaration cannot be signed by an Agent, it shall be signed by an person in the FCC database Rev:0.0

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZEM2010010162CR FCC ID: 2AX3PATL008 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

ATL008 (Label location: Back side of the device)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Internal Photos for SZEM2010010162CR FCC ID: 2AX3PATL008 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 EUT Constructional Details Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001016201 Page: 1 of 26 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2010010162CR Applicant: ATLANTIC, INC Address of Applicant: 10018 Santa Fe Springs Rd. Santa Fe Spring, CA 90670 Manufacturer: ATLANTIC CHINA OFFICE Address of Manufacturer: 2008, Kerry Centre, Renmin Nan Road, Shen Zhen, Guangdong. Factory: ATLANTIC CHINA OFFICE Address of Factory: 2008, Kerry Centre, Renmin Nan Road, Shen Zhen, Guangdong. Equipment Under Test (EUT): EUT Name: RGB LED light with Remote Model No.: ATL008, ATL009, DAR001, DAR002 ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: 2AX3PATL008 Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2020-10-13 Date of Test: 2020-11-03 to 2020-11-10 Date of Issue: 2020-11-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001016201 Page: 2 of 26 Revision Record Version Chapter Date Modifier Remark 01 2020-11-12 Original Authorized for issue by: Powell Bao /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001016201 Page: 3 of 26 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.231 N/A 47 CFR Part 15, Subpart C 15.203 Pass N/A: Not applicable Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.231(c) Pass Dwell Time (15.231(a)) 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.231(a) Pass Field Strength of the Fundamental Signal (15.231(b)) 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.231(b) Pass Radiated Emissions 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.231(b) Pass N/A: Not applicable Remark: Model No.: ATL008, ATL009, DAR001, DAR002 Only the model ATL008 was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on appearance. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM201001016201 Page: 4 of 26 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 DETAILS OF E.U.T. ......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 4.4 TEST LOCATION ............................................................................................................................. 6 4.5 TEST FACILITY ............................................................................................................................... 6 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 6 5 EQUIPMENT LIST ............................................................................................................................... 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................. 9 6.1 ANTENNA REQUIREMENT ................................................................................................................. 9 6.1.1 Test Requirement: ................................................................................................................... 9 6.1.2 Conclusion ............................................................................................................................... 9 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................10 7.1 20DB BANDWIDTH .........................................................................................................................10 7.1.1 E.U.T. Operation .....................................................................................................................10 7.1.2 Test Setup Diagram ................................................................................................................10 7.1.3 Measurement Procedure and Data .........................................................................................10 7.2 DWELL TIME (15.231(A)) ...............................................................................................................12 7.2.1 E.U.T. Operation .....................................................................................................................12 7.2.2 Test Setup Diagram ................................................................................................................12 7.2.3 M…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2010010162CR FCC ID: 2AX3PATL008 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Field Strength of the Fundamental Signal (15.231(b)) Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.2 Radiated Emissions Test Setup