2AX4J9000456Framery Control Unit

FRAMERY CONTROL UNIT USER MANUAL Framey Patamäenkatu 7, 33900 Tampere, Finland Info framery.com GENERAL NOTES PRODUCT IS ONLY FOR FRAMERY PRODUCT USE COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF FRAMERY. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT PERMISSION. Version control: 9.2.2021 v 0.1 (DRAFT) Pirjo Laurila Contents 1. Preface ............................................................................................................................................ 4 2. Intended use and use conditions .................................................................................................... 4 2.1 Non-conventional use ................................................................................................................... 4 2.2 Ambient conditions for use ........................................................................................................... 4 3. Regulatory conditions for use ......................................................................................................... 4 3.1 Compliance statements FCC ......................................................................................................... 5 3.2 Compliance markings (labeling) FCC ............................................................................................. 5 3.3 Advice on Further Testing of the Host and Instructions to the End User FCC .............................. 6 3.4 Compliance statements and markings IC ...................................................................................... 7 4. List of antennas ............................................................................................................................... 8 5. Assembly instructions ..................................................................................................................... 8 1. Preface This instruction manual describes the use of Framery Control Unit. It is exclusively for use in Framery’s phone booths, like Framey One, and other future Framery meeting space products, pods. The user instructions contain the following information: General information about the purpose and content of the instructions Intended use and use conditions Compliance statements with list the FCC rules that are applicable to the transmitter. RF exposure conditions Advice on further testing needed for the host and instructions to end user A list of antennas included in the application Assembly instructions of Control Unit 2. Intended use and use conditions The Framery Control Unit model 9000456-01A is intended for use in Framery One pod for short term indoor commercial and household use. Warning: WARNING –To reduce the risk of burns, fire, electric shock, or injury to persons: • Use this product only for its intended use as described in the user instructions. • Do not use attachments not recommended by the manufacturer. 2.1 Non-conventional use Any use or maintenance of the product that is not specifically allowed in the installation, maintenance, troubleshooting or user instructions is prohibited, including the following: • Installation, maintenance or disassembly of the Control Unit without reading and understanding the instructions for those actions • Use of the Control Unit for any other host except Framery One • Making alterations to the Control Unit • Using the Contorl Unit in spite of obvious defects or damage • Using the Contorl Unit or host product outdoors or in conditions where the temperature or air quality is not safe 2.2 Ambient conditions for use The host product is intended to be used in the following conditions: • Ambient temperature: +15°C ... +30°C (59°F ... 86°F) • Humidity: max. 50% • Sufficient air quality surrounding the product 3. Regulatory conditions for use • According to definition on FCC 2.1093 this is a portable device and the following conditions must be met: • 1. This Approval is applicable for a portable device. The antenna installation and operating configurations of this transmitter, including any applicable source-based timeaveraging duty factor, antenna gain and cable loss must satisfy Requirements of 2.1093 for general population/uncontrolled exposures. • 2. The EUT is a portable device and may not transmit simultaneously with any other antenna or transmitter without shown to be compliant with requirements on 2.1093 and other applicable sections of FCC Requirements. • 3. This device contains LTE and BLE modules and must not transmit simultaneously with any other antenna or transmitter. • 4. The host end product must include a user manual that clearly defines operating requirements and conditions that must be observed to ensure compliance with current FCC RF exposure guidelines. • 5. This transmitter has been tested and compliant with RF exposure for general public use limb and body exposure limits. Integration should be such the end user body is prevented from approaching the Control unit closer than 10 mm. Limb contact on Contorl Unit display is allowed. This information is needed for the host product manufacturer to provide to end users in their end- product manuals. • 6. To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, maximum antenna gain (including cable loss) must not exceed: Operating Band FCC Max Antenna Gain (dBi) IC Max Antenna Gain（dBi） GSM850 8.60 7.44 GSM1900 10.19 10.19 WCDMA BAND II 8.00 8.00 WCDMA BAND IV 5.00 5.00 WCDMA BAND V 9.42 8.26 LTE BAND 2 8.00 8.00 LTE BAND 4 5.00 5.00 LTE BAND 5 9.41 8.25 LTE BAND 7 8.00 8.00 LTE BAND 12 8.70 7.76 LTE BAND 13 9.16 8.09 LTE BAND 25 8.00 8.00 LTE BAND 26(814-824) 9.36 NA LTE BAND 26(824-849) 9.41 8.25 LTE BAND 38 8.00 8.00 LTE BAND 41 BLE 8.00 5.00 8.00 5.00 3.1 Compliance statements FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This …

Text truncated - open the document above for the full version.

1 (2) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com To Whom It May Concern, Mar 2 nd , 2021 Regarding New Certification For Framery Oy FRN 0030157325 Grantee Code 2AX4J We Framery Oy, FRN 0030157325, Grantee Code 2AX4J, hereby declare our intend to certify Framery Control Unit FCC ID: 2AX4J9000456 as a portable module with a BLE containing LTE module FCC ID: 2AX4J201906EG21G. The RF module is used for machine to machine communications and it is tested for simultaneous use of LTE and BLE. This certified Control Unit FCC ID: 2AX4J9000456 is exclusively for use in Framery’s phone booths, like Framey One, and other future Framery meeting space products. Please see Annex 1 on this letter for further details on Framery products. For the FCC ID: 2AX4J201906EG21G LTE module we declare that there is no change in the design, circuitry, or construction, and the original test results continue to be representative of and applicable to the equipment. It is certified per Class II permissive change. Should you have any questions, please feel free to contact the undersigned. Sincerely, Timo Inkinen Head of Product Development & Quality Annex 1 Feb 12 th , 2021 2 (2) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com Framery Control Unit Framery One with Framery Control Unit Framery Oy is established in 2010 at Tampere, Finland and created the business for acoustic phone booths and meeting pods. Framery pods reduce interruptions and distraction on open-plan offices allowing quiet space for focus and conversations without distracting others. Framery Oy has global network of over 200 dealers and we have delivered over 20 000 units world wide of Classic line products Framery O, Q and 2Q. We are now introducing a revolutionary product again, Framery One, with advanced communication features (RF) on Framery Control Unit. Control Unit is used for adjusting the phone booth lights and ventilation, for digital calendar bookings/calendar system, information and providing advanced preventive maintenance features for facility management. Control unit performs only M to M communications. For further information on Framery One please visit our web site www.frameryacoustics.com

FCC confidentiatlity request letter 1 (1) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com Date: 02/12/2021 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Framery OY Patamäenkatu 7 33900 Tampere Finland Regarding: Confidentiality Request regarding application for FCC ID: 2AX4J9000456 containing FCC ID: 2AX4J201906EG21G LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Parts List / BOM Tune Up Procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Timo Inkinen Head of Product Development and Quality Framery Oy

1 (3) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com Framery Control Unit photographs - external Framery Control Unit Model #9000456-01A FCC ID: 2AX4J9000456 containing FCC ID: 2AX4J201906EG21G IC: 26702-9000456 containing IC: 26702-201906EG21G Control Unit outside 2 (3) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com 3 (3) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com

1 (2) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com Framery Control Unit e-markings FOR US: Following FCC electronic label is available on Framery Control unit display: Framery Control Unit Model #9000456-01A FCC ID: 2AX4J9000456 containing FCC ID: 2AX4J201906EG21G This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Access from Main menu -> Compliance information FOR CANADA: Following IC electronic label is available on Framery Control Unit display: Framery Control Unit Model #9000456-01A IC: 26702-9000456 containing IC: 26702-201906EG21G IC: 26702-9000456 contient IC: 26702-201906EG21G "This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device." or "Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement." Access from Main menu -> Compliance Information Following label is attached on the package of Framery Control Unit and the host product: 2 (2) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com

1 (2) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com Framery Control Unit photographs - internal Framery Control Unit Model #9000456-01A FCC ID: 2AX4J9000456 containing FCC ID: 2AX4J201906EG21G IC: 26702-9000456 containing IC: 26702-201906EG21G Control Unit PCB front Control Unit PCB back 2 (2) Framery Oy VAT FI23527139 Patamäenkatu 7 2352713-9 33900 Tampere, Finland [email protected] +358 40 723 9995 frameryacoustics.com PCB placement on control unit

Reference number: 300627-1-3 Page 1 of 20 These test results are valid for the tested unit only. This report shall not be reproduced, except in full, without a written permission of SGS Fimko. Test Report INTENTIONAL RADIATOR TESTS ACCORDING TO FCC PART 15 C and INDUSTRY CANADA REQUIREMENTS Equipment Under Test: Framery Control Unit and Power Supply for Soundproof meeting pod Model: Framery Control Unit Trade Mark: Framery Manufacturer: Framery Oy Patamäenkatu 7 FI-33900 Tampere Finland Customer: Framery Oy Patamäenkatu 7 FI-33900 Tampere Finland FCC Rule Part: 15.249: 2019 IC Rule Part: RSS-210: Issue 10, 2019 Date: 05 January 2021 05 January 2021 Issued by: Pekka Kälviäinen Rauno Repo Test Engineer Senior EMC/RF Specialist Reference number: 300627-1-3 Page 2 of 20 Table of Contents PRODUCTDESCRIPTION ............................................................................................................................. 3 Equipment Under Test (EUT) .................................................................................................................... 3 Ratings and declarations ........................................................................................................................... 4 GENERAL REMARKS ................................................................................................................................... 5 Disclaimer ................................................................................................................................................. 5 SUMMARY OF TESTING .............................................................................................................................. 6 EUT Test Conditions during Testing .......................................................................................................... 6 TEST RESULTS ............................................................................................................................................ 7 Antenna requirement ................................................................................................................................. 7 Conducted Emissions In The Frequency Range 150 kHz - 30 MHz ........................................................... 8 Maximum Peak Radiated Output Power .................................................................................................... 10 Transmitter Radiated Emissions 0.009 MHz to 26.5 GHz ........................................................................... 11 99% Occupied Bandwidth, 20 dB Bandwidth ............................................................................................. 17 Duty cycle correction factor, Transmit time in 100 ms ................................................................................ 19 LIST OF TEST EQUIPMENT ......................................................................................................................... 20 Reference number: 300627-1-3 Page 3 of 20 Product Description PRODUCTDESCRIPTION Equipment Under Test (EUT) Type: Framery Control Unit and Power Supply for Soundproof meeting pod Model: Framery Control Unit Trade Mark: Framery Serial no: - Software version: - Hardware version: 9000456-01A Bluetooth module: Dialog Semiconductor DA14531 Cellular radio module: Quectel EG21-G, LTE Cat 1 module FCC ID No (End product) 2AX4J9000456 IC# (End product) 26702-9000456 The equipment under test is Radio module and Power Supply for Soundproof meeting pod. The pod is equipped with Bluetooth Low Energy 5.1 and cellular (2G/3G/4G) radios. Classification of the device Fixed device Mobile Device (Human body distance > 20cm) Portable Device (Human body distance < 20cm) Modifications Incorporated in the EUT No modifications were applied to the EUT during testing. Reference number: 300627-1-3 Page 4 of 20 Product Description Ratings and declarations Type of Modulation: ☐ FHSS ☒ Other Operating Frequency Range: 2402-2480 MHz Conducted Power: - Channels: 40 Nominal Channel Bandwidth: - Channel Separation: 2 MHz Adaptivity: ☐ Adaptive ☒ Non-adaptive ☐ LBT based (if adaptive) ☐ Load based (if adaptive) Antenna Type: Integral PCB antenna Antenna Gain: +5 dBi Antenna Count: 1 Geo-location Capability: ☒ No ☐ Yes Beam Forming Capability: ☒ No ☐ Yes GSM/GPRS/EDGE ☒ Yes ☐ No Supported bands: 850/900/1800/1900 Voice call ☐ Yes ☒ No GPRS ☒ Yes ☐ No EDGE/EGPRS ☒ Yes ☐ No WCDMA ☒ Yes ☐ No Supported bands: B1, B2, B4, B5, B6, B8, B19 LTE ☒ Yes ☐ No Supported bands: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 LTE-TDD: B38, B39, B40, B41 Antenna type/model: Integral PCB antenna Antenna Gain: 5 dBi EUT Dimensions: Radio Height: 18 cm Width: 16 cm Length: 9 cm Power supply Height: 34 cm Width: 25 cm Length: 5 cm Power Requirements: 100-240 V, 50/60 Hz, 10 A Ports and Cables Cable / Port Description AC mains L/N/PE, 4.5 m DC power for Framery Control Unit 0.2 m AC power output AC output socket, 0.2 m Reference number: 300627-1-3 Page 5 of 20 General remarks GENERAL REMARKS Disclaimer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written …

Text truncated - open the document above for the full version.

FCC SAR Report_Framery Control Unit_ID4520_05022021 1 (103) Copyright © Verkotan 2021 SAR Compliance Test Report Date of Report 5/02/2021 Client’s Contact person: Pirjo Laurila Number of pages: 103 Responsible Test engineer: Ilari Kinnunen Testing laboratory: Verkotan Oy Elektroniikkatie 17 90590 Oulu Finland Client: Framery Oy Patamäenkatu 7 33900 Tampere Finland Tested device Framery Control Unit Related reports: - Testing has been carried out in accordance with: 47CFR §2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices FCC published RF exposure KDB procedures IEEE 1528 - 2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Technique Documentation: The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory Test Results: The EUT complies with the requirements in respect of all parameters subject to the test. The test results relate only to devices specified in this document Date and signatures: 05.02.2021 Laboratory Manager FCC SAR Report_Framery Control Unit_ID4520_05022021 2 (103) Copyright © Verkotan 2021 TABLE OF CONTENTS 1. SUMMARY OF SAR TEST REPORT ........................................................................................................................................................3 1.1 TEST DETAILS ..................................................................................................................................................................................................................... 3 1.2 MAXIMUM RESULTS ........................................................................................................................................................................................................ 4 1.2.1 Standalone SAR .......................................................................................................................................................................................................... 4 1.2.2 Simultaneous Transmission Extremity SAR .................................................................................................................................................... 5 1.2.3 Simultaneous Transmission Body SAR............................................................................................................................................................. 5 1.2.4 Maximum Drift ........................................................................................................................................................................................................... 5 1.2.5 Measurement Uncertainty ...................................................................................................................................................................................... 5 2. DESCRIPTION OF THE DEVICE UNDER TEST (DUT) ............................................................................................................................6 2.1 SUPPORTED FREQUENCY BANDS AND OPERATIONAL MODES ...................................................................................................................... 6 2.2 BLUETOOTH SAR TEST EXCLUSION ........................................................................................................................................................................... 7 2.2.1 Body SAR 1g ................................................................................................................................................................................................................... 7 2.2.2 Extremity SAR 10g .......................................................................................................................................................................................................... 7 2.3 SIMULTANEOUS TRANSMISSION ............................................................................................................................................................................... 7 3. OUTPUT POWER .....................................................................................................................................................................................8 3.1 MAXIMUM SPECIFIED CONDUCTED OUTPUT POWER ........................................................................................................................................ 8 3.2 TESTED CONDUCTED POWER ...................................................................................................................................................................................... 9 4. TEST EQUIPMENT ................................................................................................................................................................................ 27 4.1 TEST EQUIPMENT LIST .................................................................................................................................................................................................. 28 4.1.1 Isotropic E-field Probe Type EX3DV4 ................................................................................................................................................................. 29 4.2 PHANTOMS ...................................................................................................................................................................................................................... 29 4.3 TISSUE SIMULANTS ....................................................................................................................................................................................................... 29 4.4 SYSTEM VALIDATION STATUS ............................................................................................................…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS Page 1 of 5 Project number: 300627-1-3 SGS Fimko Ltd. Takomotie 8, FI-00380 Helsinki Finland t +358 9 6963 361 f +358 9 692 5474 www.sgs.fi Member of SGS Group (Société Générale de Surveillance) Photograph 1. The EUT, left DC power supply, right Framery Control Unit Photograph 2. The EUT TEST SETUP PHOTOGRAPHS Page 2 of 5 Project number: 300627-1-3 SGS Fimko Ltd. Takomotie 8, FI-00380 Helsinki Finland t +358 9 6963 361 f +358 9 692 5474 www.sgs.fi Member of SGS Group (Société Générale de Surveillance) Photograph 3. The EUT TEST SETUP PHOTOGRAPHS Page 3 of 5 Project number: 300627-1-3 SGS Fimko Ltd. Takomotie 8, FI-00380 Helsinki Finland t +358 9 6963 361 f +358 9 692 5474 www.sgs.fi Member of SGS Group (Société Générale de Surveillance) Photograph 4. Radiated Emissions 0.009 - 30 MHz Photograph 5. Radiated Emissions 30 – 1000 MHz TEST SETUP PHOTOGRAPHS Page 4 of 5 Project number: 300627-1-3 SGS Fimko Ltd. Takomotie 8, FI-00380 Helsinki Finland t +358 9 6963 361 f +358 9 692 5474 www.sgs.fi Member of SGS Group (Société Générale de Surveillance) Photograph 6. Radiated Emissions 1 – 18 GHz Photograph 7. Radiated Emissions 18 – 26.5 GHz TEST SETUP PHOTOGRAPHS Page 5 of 5 Project number: 300627-1-3 SGS Fimko Ltd. Takomotie 8, FI-00380 Helsinki Finland t +358 9 6963 361 f +358 9 692 5474 www.sgs.fi Member of SGS Group (Société Générale de Surveillance) Photograph 8. Conducted Emission