2AX5J-RAP2260V2Wireless Access Point

Ruijie Reyee RG-RAP2260 Access Point Hardware Installation and Reference Guide Document Version: V1.0 Date: 2022.07.04 Copyright © 2022 Ruijie Networks Copyright Ruijie Networks©2022 All rights are reserved in this document and this statement. Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks is prohibited. Trademarks including , are owned by Ruijie Networks. All other trademarks or registered trademarks mentioned in this document are owned by their respective owners. Disclaimer The products, services or features you purchase are subject to commercial contracts and terms. Some or all of the products, services or features described in this document may not be within the scope of your purchase or use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement or guarantee for the content of this document. Due to product version upgrades or other reasons, the content of this document will be updated from time to time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt. This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors. I Preface Intended Audience This document is intended for: ⚫Network engineers ⚫Technical support and servicing engineers ⚫Network administrators Technical Support ⚫The official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee ⚫Technical Support Website: https://www.ruijienetworks.com/support ⚫Case Portal: https://caseportal.ruijienetworks.com ⚫Community: https://community.ruijienetworks.com ⚫Technical Support Email: [email protected] Conventions 1.Signs The signs used in this document are described as below: Danger An alert that calls attention to safety operation instructions that if not understood or followed when operating the device can result in physical injury. Warning An alert that calls attention to important rules and information that if not understood or followed can result in data loss or equipment damage. Caution An alert that calls attention to essential information that if not understood or followed can result in function failure or performance degradation. Note An alert that contains additional or supplementary information that if not understood or followed will not lead to serious consequences. Specification An alert that contains a description of product or version support. II 2.Note This manual provides the device installation steps, hardware troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors. It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it is assumed that the users are already familiar with the related terms and concepts. Contents Preface ...................................................................................................................................................... I 1 Product Overview .............................................................................................................................. 1 1.1 Product Appearance ........................................................................................................... 1 1.1.1 Front Panel of the AP................................................................................................... 1 1.1.2 Rear Panel of the AP ................................................................................................... 2 1.2 Technical Specifications ..................................................................................................... 2 1.3 Power Supply ...................................................................................................................... 4 1.4 Cooling Solution .................................................................................................................. 5 2 Preparing for Installation ................................................................................................................... 6 2.1 Safety Precautions .............................................................................................................. 6 2.2 Installation Precautions ....................................................................................................... 6 2.3 Handling Safety ................................................................................................................... 6 2.4 Electric Safety ..................................................................................................................... 6 2.5 Installation Environment Requirements .............................................................................. 7 2.5.1 Installation Requirements ............................................................................................ 7 2.5.2 Ventilation Requirements ............................................................................................. 7 2.5.3 Temperature/ Humidity Requirements ......................................................................... 7 2.5.4 Cleanliness Requirements ........................................................................................... 7 2.5.5 Power Supply Requirements ....................................................................................... 8 2.5.6 EMI Requirements ....................................................................................................... 9 2.6 Tools ................................................................................................................................... 9 2.7 Unpacking the Access Point ......................................…

Text truncated - open the document above for the full version.

- 1 - Safety Information 1 / English 英语 2 / Čeština 捷克语 3 / Dansk 丹麦语 4 / Nederlands 荷兰语 5 / Français 法语 6 / Deutsch 德语 7 / Ελληνικά 希腊语 8 / Magyar 匈牙利语 9 / Bahasa Indonesia 印尼语 10 / Italiano 意大利语 11 / 日本語 日语 12 / 한국어 韩语 13 / Norsk 挪威语 14 / Polski 波兰语 15 / Português 葡萄牙语 16 / Română 罗马尼亚语 17 / Русский язык 俄语 18 / Español 西班牙语 19 / Svenska 瑞典语 20 / Türkçe 土耳其语 21 / ไทย 泰语 22 / Tiếng Việt 越南语 23/ العربية 阿拉伯语 24/繁体中文 繁体中文 25/希伯来语 希伯来语 Safety Information • Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.  Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device in these environments may result in circuit malfunctions. • Ideal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -40 °C to +70 °C. Extreme heat or cold may damage your device or accessories. For detailed device operation circumstance information, please refer to the user guide. • Using an unapproved or incompatible power adapter, charger, power cord, cable or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. - 2 - • For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.  Adapter shall be installed near the equipment and shall be easily accessible. • Do not touch the device or the charger with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks.  Plug the product into the wall outlets with earthing connection through the power supply cord which provided by the manufacturer.  Do not block any ventilation openings. Install this apparatus in accordance with the manufacturer’s instructions.  Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.  Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.  Use only attachments/accessories specified by the manufacturer.  Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1 / English 英语 2 / Čeština 捷克语 3 / Dansk 丹麦语 4 / Nederlands 荷兰语 5 / Français 法语 6 / Deutsch 德语 7 / Ελληνικά 希腊语 8 / Magyar 匈牙利语 9 / Italiano 意大利语 10 / Norsk 挪威语 11 / Polski 波兰语 12 / Português 葡萄牙语 13 / Română 罗马尼亚语 14 / Español 西班牙语 15 / Svenska 瑞典语 16 / Türkçe 土耳其语 EU declaration of conformity Ruijie Networks Co., Ltd. hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863, and UK Radio Equipment Regulations. The original EU and UK declaration of conformity may be found at https://www.ruijienetworks.com/support - 3 - Restrictions in the 5 GHz band: The 5150 to 5350 MHz frequency range is restricted to indoor use only in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK. Frequency Bands and Power The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2400-2483.5MHz: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm, 5470-5725 MHz: 30 dBm. Disposal and recycling information This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. For more information, please contact your local authorities, retailer, or household waste disposal service. This product is RoHS compliant. This product is in compliance with Directive 2011/65/EU and UK The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, and its amendments, on the restriction of the use of certain hazardous substances in electrical and electronic equipment. CAUTION FCC AND IC STATEMENT FOR USERS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For a Class A digital device ： NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency - 4 - energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAN ICES-003(A)/NMB-003(A) For a Class B digital device: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment …

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Ruijie Networks Co., Ltd. Address Building 19, Juyuanzhou Industrial Park, No. 618 Jinshan Road, Cangshan District Fuzhou, Fujia 350002 China Grantee Code 2AX5J FCC ID 2AX5J-RAP2260V2 Authorized Contact Name Chao Jiang Contact Email [email protected] Contact Phone +86 13705060310 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Ruijie Networks Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Ruijie Networks Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023-12-12 Print Name: Chao Jiang Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITEDSTATES DESIGNATED AGENT LETTER Date:2023-12-12 TO:Federal CommunicationCommission EquipmentAuthorizationBranch 7435 OaklandMillsRoad Columbia,MID 21046 ApplicantU.S.designatedagent CompanyName:RuijieNetworksCo.,Ltd.CompanyName:UnitedConsultingTechnology ServicesCo.,Ltd. GranteeCode:2AX5JFRN0033495714 ContactName:ChaoJiangContactName:DavidWu Address:Building19,Juyuanzhou IndustrialPark,No. 618 JinshanRoad,Cangshan DistrictFuzhou,Fujia350002 China Address:17800CASTLETONSTSTE 665 CITYOF INDUSTRYCA 91748UnitedStates City/Province/Zip:City/Province/Zip: Telephone:+8613705060310Telephone:(626)217-4022 Fax:Fax: Email:[email protected]:[email protected] ApplicableEquipment:FCCID:2AX5J-RAP2260V2 ATTN:Directorof Certification: We, RuijieNetworks Co.,Ltd. and United Consulting Technology ServicesCo., Ltd. understand and ac knowledge the applicants consent and the designated agent’s obligationto acceptserviceof processin the UnitedStatesfor matters relatedto the applicableequipment, and at the physicalU.S.address and e- mail of the designated agentlistedabove. We , RuijieNetworks Co.,Ltd. and United Consulting Technology ServicesCo., Ltd. acknowledge the ap plicant’s acceptanceofits obligationto maintain an agent forserviceof processin the UnitedStatesfor no less than one year after either the grantee has permanently terminated all marketing and importation of the applicableequipmentwithinthe U.S.,or the conclusionofany Commission-related administrative or judicialproceedinginvolvingthe equipment, whicheveris later. ApplicantU.S.designatedagent Name(Printed): Chao JiangName(Printed):DavidWu Title:ManagerTitle:CEO Signature:Signature:

Ruijie Networks Co., Ltd. Date: 2023-12-12 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AX5J-RAP2260V2 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Ruijie Networks Co., Ltd. This authorization is valid until further written notice from the applicant. Print Name: Chao Jiang Title: Manager Signature: On behalf of Company: Ruijie Networks Co., Ltd. Telephone: +86 13705060310 E-mail: [email protected]

Ruijie Networks Co., Ltd. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AX5J-RAP2260V2 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Chao Jiang Title: Manager Signature: On behalf of Company: Ruijie Networks Co., Ltd. Telephone: +86 13705060310 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 4 Appendix External Photos for SZCR2311003539AT FCC ID:2AX5J-RAP2260V2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 4 - End of the Appendix -

Label&location

Label

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 4 Appendix Internal Photos for SZCR2311003539AT FCC ID: 2AX5J-RAP2260V2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 4 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353905 Page: 1 of 12 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2311003539AT Applicant: Ruijie Networks Co., Ltd. Address of Applicant: Building 19, Juyuanzhou Industrial Park, No. 618 Jinshan Road, Cangshan District, Fuzhou, Fujian, 350002, China Manufacturer: Ruijie Networks Co., Ltd. Address of Manufacturer: Building 19, Juyuanzhou Industrial Park, No. 618 Jinshan Road, Cangshan District, Fuzhou, Fujian, 350002, China Equipment Under Test (EUT): EUT Name: Wireless Access Point Model No.: RG-RAP2260 Trade Mark: ,,, FCC ID: 2AX5J-RAP2260V2 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-11-06 Date of Evaluation: 2023-11-15 to 2023-12-05 Date of Issue: 2023-12-06 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353905 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2023-12-06 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353905 Page: 3 of 12 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 5 3.4 Test Location ...................................................................................................................................... 6 3.5 Test Facility ........................................................................................................................................ 6 3.6 Deviation from Standards ................................................................................................................... 6 3.7 Abnormalities from Standard Conditions ........................................................................................... 6 4 FCC Radiofrequency radiation exposure limits .................................................................................... 7 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 7 4.2 MPE-based Exemption ...................................................................................................................... 7 4.3 SAR-based Exemption ....................................................................................................................... 8 5 Measurement and Calculation ............................................................................................................... 11 5.1 Maximum transmit power ................................................................................................................. 11 5.2 RF Exposure Calculation ................................................................................................................. 12 5.3 Simultaneous transmitting ................................................................................................................ 12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353905 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: 12V 2A, PoE For 2.4G WIFI: Operation Frequency: 802.11b/g/n(HT20)/ax(HEW20): 2412MHz to 2462MHz, 802.11n(HT40)/ax(HEW40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11 g/n: OFDM(16QAM, 64QAM, QPSK, BPSK) 802.11 ax: OFDMA(16QAM, 64QAM, 256QAM, 1024QAM, QPSK, BPSK) Channel Spacing: 5MHz Number of Channels: 802.11b/g/n(HT20)/ax(HEW20): 11 802.11n(HT40)/ax(HEW40):7 Antenna Type: PIFA Antenna Antenna Gain: Ant1: 2.80dBi Ant2: 2.50dBi For 5G WIFI: Operation Frequency: Band Mode Frequency Range(MHz) Number of channels UNII Band I 802.11a/n(HT20)/ac(HT20)/ax(HEW20): 5180-5240 4 802.11n(HT40)/ac(HT40)/ax(HEW40) 5190-5230 2 802.11ac(HT80)/ax(HEW80) 5210 1 802.11ac(HT160)/ax(HEW160) 5250 1 UNII Band II-A 802.11a/n(HT20)/ac(HT20)/ax(HEW20): 5260-5320 4 802.11n(HT40)/ac(HT40)/ax(HEW40) 5270-5310 2 802.11ac(HT80)/ax(HEW80) 5290 1 UNII Band II-C 802.11a/n(HT20)/ac(HT20)/ax(HEW20): 5500-5700 11 802.11n(HT40)/ac(HT40)/ax(HEW40) 5510-5670 5 802.11ac(HT80)/ax(HEW80) 5530,5610 2 802.11ac(HT160)/ax(HEW160) 5570 1 UNII Band III 802.11a/n(HT20)/ac(HT20)/ax(HEW20): 5745-5825 5 802.11n(HT40)/ac(HT40)/ax(HEW40) 5755-5795 2 802.11ac(HT80)/ax(HEW80) 5775 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353905 Page: 5 of 12 Modulation Type: 802.11a: OFDM(16QAM, 64QAM, QPSK, BPSK) 802.11n: OFDM(16QAM, 64QAM, QPSK, BPSK) 802.11ac: OFDM(16QAM, 64QAM, 256QAM, QPSK, BPSK) 802.11ax: OFDMA(16QAM, 64QAM, 256QAM, 1024QAM, QPSK, BPSK) DFS Function: Master TPC Function: Support Sample Type: Fixed device Antenna Type: PIFA Antenna 5G WIFI Antenna Gain: Band An…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353902 Page: 1 of 194 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2311003539AT Applicant: Ruijie Networks Co., Ltd. Address of Applicant: Building 19, Juyuanzhou Industrial Park, No. 618 Jinshan Road, Cangshan District, Fuzhou, Fujian, 350002, China Manufacturer: Ruijie Networks Co., Ltd. Address of Manufacturer: Building 19, Juyuanzhou Industrial Park, No. 618 Jinshan Road, Cangshan District, Fuzhou, Fujian, 350002, China Equipment Under Test (EUT): EUT Name: Wireless Access Point Model No.: RG-RAP2260 Trade Mark: ,,, FCC ID: 2AX5J-RAP2260V2 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-11-06 Date of Test: 2023-11-15 to 2023-12-04 Date of Issue: 2023-12-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353902 Page: 2 of 194 Revision Record Version Chapter Date Modifier Remark 01 2023-12-06 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100353902 Page: 3 of 194 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co.…

Text truncated - open the document above for the full version.