2AX83-UBA-MCMotorcycle Wireless Charger Phone Holder

Rearview Mirror Base Fixed Holder Instruction: Use an adjustable open-end wrench to unscrew the hexagonal nut of the rearview mirror base, completely unscrew the rearview mirror, and then put the phone holder mounting bracket on the screw hole. After alignment, put the rearview mirror back and tighten the screw to complete the mounting. As shown in Figure (1-3) Preparations before installation: Figur e (1 - 3) Figur e (1 - 2) 80mm 1 00 mm Clamp Holder Instruction for Rearview Mirror: According to the diameter specification of the Rearview mirror pole to choose a more suitable anti-slip rubber ring, set the rubber ring on the Phone Clamp Instructions: 1. Install your phone: As shown in Figure (1-5), by pushing the push bar on the holder to the end, the phone clamp will be opened. Put the phone in the clamp with proper direction as need. After releasing the push bar, the phone will be securely locked by the clamp. Then tighten the secure lock on the back Take off the phone: Loosen the secure lock on the back. After pushing the push ba to the end, the phone clamp will be open. Then the phone can be taken off from the holder. As shown in Figure (1-6). r Figur e (1 - 7) Dual-Mode Smart Charging Phone Holder Power Connection Installation and Operation: (Note: Only UBA-MC model has this function) Power Connection Instruction Connect the red lug to the positive pole of the battery of motorcycle or electric bicycle and connect the black lug to the negative pole. Note: The output voltage of the battery should be DC 12V.(It is recommended to have a professional motorcycle technician to install it.) 1.Charging Instruction: After connecting with the power successfully, the indicator light for wireless charging will turn blue, which indicates the 2.Wireless charging instruction: With a single tap on the charging switch, the indicator light or wireless charging will turn on or off. When the indicator light is off, wireless charging is not available. (Note: Wireless harging will turn off if there is no user operation in 30 minutes.) 3.USB Wired Charging Instruction: After connecting with the power successfully, the USB wired c harging function will be always on. It is available for charging at any time. (As shown in Figure 1-8) Rearview mirror pole and then mount the rod clamp on rubber ring. After adjust the suitable position angle as shown in Figure (1-4), use with a hexagonal wrench to lock the clamp to complete the mounting. . 1 Figur e (1 - 6) Horizontal and Vertical Modes Switching Instructions: Loosen the universal ball joint arm knob in the anticlockwise direction as shown in Figure (1-7), you can adjust the phone holder according to the needs of horizontal and vertical, then tighten the knob in the clockwise direction. Figur e (1 - 4) wireless charging is available. Figur e (1 - 8) Figur e (1 - 5) 80mm 5 1 3 4 3 4 3 2 1 2 2 1 2 1 2 4 2 Thank you for using this phone holder. For safe and convenient use of this product, please read the instructions carefully before use . Functional Features 1.The phone mount is angle - adjustable in all directions and the thickness of the clamp is adjustable as well . 2. With one - key automatically lock and quick release design, it is convenient to put in and take out the phone . Features with mutual -traction mechanical locking system, it is enabled to prevent any risks of dropping the phone caused by high -speed riding . 3.It is equipped with dual - direction shock- absorption structure . 4.Phones of compatible sizes can be easily exchanged from the holder. 5.The charging model has two charging modes, which can not only support wireless charging for a phone, but also support wired charging with USB charging cable for a phone (or other power- applicable action camera) . (Note: Only model UBA - MC has this function) . Specifications Model: UBA - M, UBA - MC (Smart Charging Model) Name: Motorcycle Phone Holder Material: Aluminum alloy, stainless steel, PA66, rubber Clamping width: 7 0mm - 88mm Clamping length: 152mm - 1 7 0mm Clamping thickness: ＜15mm Handlebars pipe clamp aperture: 11mm - 27mm Mirror base mounting aperture: 10mm Installation instructions: The holders can be fixed on handlebar or rearview mirror base. Clamp Holder Instruction for Handlebar: According to the diameter specification of the handlebar to choose a more suitable anti-slip rubber ring, set the rubber ring on the handlebar and then mount the rod clamp on rubber ring. After adjust the suitable position angle as shown in Figure (1-2), use with a hexagonal wrench to lock the clamp to complete the mounting. Charger Parameters The charging model has two charging modes, 15W wireless charging and max 36W wired fast charging. 1. The input voltage of the charging model is 12V. The max automatic-identified charging speed for USB wired charging is 36W and the wireless charging speed is 15W. When using this product for the first time, use the hexagon wrench to loosen the screws on the limit posts of the phone clamp, adjust the limit posts according to the thickness of the phone to be installed, and then tighten the screws. (Note: Five limit posts need to be adjusted to the same position together). As shown in Figure (1-1) 3 2 3 1 1 4 Motorcycle Phone Holder Instruction Manual 1 00 mm Figur e (1 - 1) c f 3 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates …

Text truncated - open the document above for the full version.

Dongguan Lanparte Television Equipment Technology Co., LTD. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 9/1/2023 U.S. Agent Designation Dongguan Lanparte Television Equipment Technology Co., LTD. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AX83-UBA-MC): Name and company of U.S. agent: HYPERMEDIA INTERNATIONAL INC Physical U.S. address of agent: 15 HAMMOND SUITE 304 IRVINE, CA 92618 United States FRN of U.S. agent: 0034131219 Email address of U.S. agent: [email protected] HYPERMEDIA INTERNATIONAL INC acknowledges their obligation to accept service of process on behalf of Dongguan Lanparte Television Equipment Technology Co., LTD.. Dongguan Lanparte Television Equipment Technology Co., LTD. with the FRN 0030212062 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Kevin Lin President Dongguan Lanparte Television Equipment Technology Co., LTD. Signature SPENCER LU GENERAL MANAGER HYPERMEDIA INTERNATIONAL INC 48_[mo del] US_Agent_2.911(d)(7) - U, V05

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Dongguan Lanparte Television Equipment Technology Co., LTD. Address: No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Phone: +86-769-81559368 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-08-31 Signature Date Printed Name of Signee: Kevin Lin Company: Dongguan Lanparte Television Equipment Technology Co., LTD. Address: No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Phone: +86-769-81559368 Fax: +86-769-81559368 Email: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2AX83-UBA-MC UBA-MC, UBA-M, UBA-MC-Z, UBA-M-Z, PH-M, PH-M-Z We, applicant Company Name: Dongguan Lanparte Television Equipment Technology Co., LTD. Address: No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Phone: +86-769-81559368 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-08-31 Signature Date Printed Name of Signee: Kevin Lin Company: Dongguan Lanparte Television Equipment Technology Co., LTD. Address: No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Phone: +86-769-81559368 Fax: +86-769-81559368 Email: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2AX83-UBA-MC UBA-MC, UBA-M, UBA-MC-Z, UBA-M-Z, PH-M, PH-M-Z For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Parts Lists • the Tune Up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2023-08-31 Signature Date Printed Name of Signee: Kevin Lin Company: Dongguan Lanparte Television Equipment Technology Co., LTD. Address: No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Phone: +86-769-81559368 Fax: +86-769-81559368 Email: [email protected]

Dongguan Lanparte Television Equipment Technology Co., LTD. No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Date: August 31, 2023 FCC ID: 2AX83-UBA-MC Model Number: UBA-MC, UBA-M, UBA-MC-Z, UBA-M-Z, PH-M, PH-M-Z To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Dongguan Lanparte Television Equipment Technology Co., LTD. hereby declare that our product (Motorcycle Wireless Charger Phone Holder) Model Number: UBA- MC, UBA-M, UBA-MC-Z, UBA-M-Z, PH-M, PH-M-Z meet item 5.2 of KDB 680106v03r01 as follow; Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes The device operate in the frequency range is 111 KHz – 205 KHz Output power from each primary coil is less than or equal to 15 watts. Yes The maximum output power of the primary coil is 15W The system may consist of more than one source primary coils, charging one or more clients. If more than one primary coil is present, the coil pairs may be powered on at the same time. Yes The transfer system includes single coil that is able to detect receiver device Client device is placed directly in contact with the transmitter. Yes Client device is placed directly in contact with the transmitter Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes Mobile exposure condition only The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please contact me if you have any question. Dongguan Lanparte Television Equipment Technology Co., LTD. No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Sincerely, (Signed) Name/Title: Kevin Lin / President Company: Dongguan Lanparte Television Equipment Technology Co., LTD. Address: No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Tel: +86-769-81559368 Fax: +86-769-81559368 E-Mail: [email protected]

Shenzhen Leiden Digital Technology Co., Ltd Room 602A, Building F, Second Industrial Zone, No. 131 Bulan Road, Shanglilang Community, Nanwan, Longgang District, Shenzhen, Guangdong, China Date: August 31, 2023 FCC ID: 2AX83-UBA-MC Model Number: UBA-MC, UBA-M, UBA-MC-Z, UBA-M-Z, PH-M, PH-M-Z To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Dongguan Lanparte Television Equipment Technology Co., LTD. hereby declare that our product (Motorcycle Wireless Charger Phone Holder) Model Number: UBA-MC, UBA-M, UBA-MC-Z, UBA-M-Z, PH-M, PH-M-Z board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Kevin Lin / President Company: Dongguan Lanparte Television Equipment Technology Co., LTD. Address: No. 1, XinAn XingWang 2nd Road, ChangAn Town, Dongguan, Guangdong, China Tel: +86-769-81559368 Fax: +86-769-81559368 E-Mail: [email protected]

Page 1 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 1 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Building A and 301 Building C, Juji Industrial Park, Yabianxueziwei Shajing Street, Baoan District, Shenzhen, 518000, P.R.C. Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L4.0cm x2.0cm) Label Location Motorcycle Wireless Charger Phone Holder Model:UBA-MC FCC ID:2AX83-UBA-MC

Page 1 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Coil Antenna Page 4 of 4 FCC ID:2AX83-UBA-MC Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 10 FCC ID:2AX83-UBA-MC Report No.: LCSA08213029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation Report 1. Product Information FCC ID: 2AX83-UBA-MC Product Name Motorcycle Wireless Charger Phone Holder Model Number UBA-MC Additional Model No. UBA-M,UBA-MC-Z,UBA-M-Z,PH-M,PH-M-Z Model Declaration PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power Supply Input: DC 12V Wireless Output:15W Max Modulation Type ASK Frequency Range 111.0~205.0KHz Operation Frequency 207.6 KHz Antenna Type Coil Antenna Hardware version / Software version / Accessories / Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Device 2. Evaluation Method Per KDB 680106 D01 Section 3. RF Exposure Requirements; 1) Consumer wireless power transfer devices approved under Part 18 in some cases have to demonstrate compliance with RF exposure requirements. The potential for exposure must be assessed according to the operating configurations of the wireless system and the exposure conditions of users and bystanders. RF exposure must be evaluated with the client device(s) being charged by the primary at maximum output power. The RF exposure requirements must be determined in conjunction with the device operating characteristics, according to the mobile and portable exposure requirements in Section 2.1091 and Section 2.1093 of the rules. SAR and MPE limits do not cover the frequency range for wireless power transfer applications which operate below 100 kHz and 300 kHz respectively; therefore, RF exposure compliance needs to be determined with respect to 1.1307 (c) and (d) of the FCC rules. 2) Based on the design and implementation of the power transfer application, it must be clearly identified if mobile or portable RF exposure conditions apply. Devices that are installed to provide separation of at least 20 cm from users and bystanders may qualify for mobile exposure conditions. For some conditions where users and bystanders may be exposed at closer than 20 cm, section 2.1091(d) (4) of the rules may apply. 3) For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the Page 2 of 10 FCC ID:2AX83-UBA-MC Report No.: LCSA08213029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. 4) Portable exposure conditions from 100 kHz to 6 GHz are determined with respect to SAR requirements. Existing SAR systems and test procedures are generally intended for measurements above 100 MHz. While numerical modeling can be an alternative, the constraints of substantial computational resources at low frequencies could introduce further limitations. Under these circumstances, including operations below 100 kHz, the Commission may consider a combination of analytical analysis, field strength, radiated and conducted power measurements, in conjunction with some limited numerical modeling to assess compliance. 5) Depending on the operating frequency, existing SAR and MPE measurement procedures may be adapted to evaluate wireless power transfer devices for compliance with respect to mobile or portable exposure conditions. If the grantee or its test lab have any questions regarding RF exposure evaluation they should contact the FCC Laboratory with sufficient system operating configuration details to determine if RF exposure evaluation is necessary and, if required, how to apply specific test procedures. Below 100 MHz, when SAR testing is required and the device is operating at close proximity to persons, information on device design, implementation, operating configurations, exposure conditions of users and bystanders are needed to determine the evaluation and testing requirements. In addition, the influence of nearby objects may also need consideration according to the wireless power transfer system implementation; for example, the effects of placing the device, its coils or radiating elements on or near metallic surfaces 3. Evaluation Limit 3.1 Refer evaluation method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 680106 D01 RF Exposure Wireless Charging Apps v03: RF Exposure Considerations for Low Power Consumer Wireless Power Transfer Applications FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices FCC CFR 47 part 18.107:Indusial, Scientific, and Medical Equipment Page 3 of 10 FCC ID:2AX83-UBA-MC Report No.: LCSA08213029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 3.2 Limit Limits for Maximum Pe…

Text truncated - open the document above for the full version.

Dongguan Lanparte Television Equipment Technology Co.,Ltd. Manufacturer：Dongguan Lanparte Television Equipment Technology Co.,Ltd. Address：No.1 xingwang 2nd road, xin'an, chang'an town, Dongguan City, Guangdong China 第 2 页 产 品 规 格 SPECIFICATION 一、Mechanical Specification: Shielding Outer Diameter(A) 43.5±0.5mm Shielding Inner Diameter(G) 5±0.3mm Coil Outer Diameter （B） 39±1mm Coil Inner Diameter （C） 20.5±0.5mm Total Thickness（D）<1.8mm Segment Length（E）25mm±3mm Pin Length（F） 3 ± 2mm Shielding Thickness 0.8±0.1mm Shielding Shape Circle with two grooves Antenna Gain 0dBi All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Page 1 of 23 FCC ID:2AX83-UBA-MC Report No.: LCSA08213029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Dongguan Lanparte Television Equipment Technology Co.,Ltd. Motorcycle Wireless Charger Phone Holder Test Model: UBA-MC Additional models No.: UBA-M,UBA-MC-Z,UBA-M-Z,PH-M,PH-M-Z Prepared for : Dongguan Lanparte Television Equipment Technology Co.,Ltd. Address : No.1 xingwang 2nd road, xin’an, chang’an town, Dongguan City, Guangdong China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : August 21, 2023 Number of tested samples : 2 Serial number : A08213029-1, A08213029-2 Date of Test : August 21, 2023~ August 30, 2023 Date of Report : August 31, 2023 Page 2 of 23 FCC ID:2AX83-UBA-MC Report No.: LCSA08213029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15C Report Reference No. ................. : LCSA08213029EA Date Of Issue ................................. : August 31, 2023 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Dongguan Lanparte Television Equipment Technology Co.,Ltd. Address .......................................... : No.1 xingwang 2nd road, xin’an, chang’an town, Dongguan City, Guangdong China Test Specification Standard ......................................... : FCC CFR 47 PART 15C Test Report Form No...................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Motorcycle Wireless Charger Phone Holder Trade Mark ..................................... : LanParte Test Model ...................................... : UBA-MC Power Supply ................................. : Input:DC 12V Wireless Output:15W Max Result ........................................... : Positive Compiled by: Supervised by: Approved by: Jack Liu/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 23 FCC ID:2AX83-UBA-MC Report No.: LCSA08213029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA08213029EA August 31, 2023 Date of issue Test Model.............................. : UBA-MC EUT......................................... : Motorcycle Wireless Charger Phone Holder Applicant............................... : Dongguan Lanparte Television Equipment Technology Co.,Ltd. Address................................... : No.1 xingwang 2nd road, xin’an, chang’an town, Dongguan City, Guangdong China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Dongguan Lanparte Television Equipment Technology Co.,Ltd. Address................................... : No.1 xingwang 2nd road, xin’an, chang’an town, Dongguan City, Guangdong China Telephone............................... : / Fax.......................................... : / Factory.......…

Text truncated - open the document above for the full version.