2AX92-P19Training Collar

Made in China X-Small Small Medium Large Large Large X-Large X-Large X-Large 9.8 - 11.8 11.4 - 14.1 13.7 - 16.5 16.1 - 18.5 18.1 - 20.8 20.4 - 23.2 29.9 - 33.0 34.6 - 38.1 36.2 - 39.3 7.4 9.0 11.0 12.2 13.7 15.7 23.6 23.6 27.5 1 - 10 11 - 25 26 - 40 41 - 70 71 - 90 91 - 110 N/A N/A N/A Chihuahua, Yorkshire, Terrier Poodle, Pomeranian Shin Tzu, Maltese Dog Miniature Schnauzer, Pekingese English Cocker Spaniel Beagle Husky Labrador Retriever Golden Retriever, Old English Sheepdog 7.8 - 8.6 7.8 - 9.4 9.0 - 11.0 10.6 - 12.2 11.8 - 13.3 12.9 - 14.5 16.9 - 18.9 18.5 - 20.4 20.4 - 24.4 Size Neck Girth (IN) Chest Girth (IN) Back Length (IN) Weight (LBS) Breed Reference Size for Different Dogs Read Full User Manual Before Use! DOG TRAINING COLLAR More Eective and Safer Training Collar for Dogs with Our Advanced Technology Transmitter: 3.7V 300mAH LIP Receiver: 3.7V 400mAH LIP 23 WARNING: Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your Veterinarian or certified trainer. CAUTION: Safety during on-leash training. It is vitally important that you and your dog remain safe while learning during on-leash training. Your dog should be on a strong leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also be physically strong enough to restrain your dog when he tries to chase. Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made too tight on the pet's neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. • Avoid leaving the collar on the dog for more than 12 hours per day. • When possible re-position the collar on the pet's neck every 1 to 2 hours. • Check the fit to prevent excessive pressure; follow the instructions in this manual. • Never connect a leash to the electronic collar; it will cause excessive pressure on the contacts. • Never connect a leash to the electronic collar; it will cause excessive pressure on the contacts. • When using a separate collar for a leash, don't put pressure on the electronic collar. • Wash the dog's neck area and the contacts of the collar weekly with a damp cloth. • Examine the contact area daily for signs of a rash of a sore. • If a rash or sore is found, discontinue use of the collar until the skin has healed. • If the condition persists beyond 48 hours, see your veterinarian. These steps will help keep your pet safe and comfortable. Millions of pets are comfortable while they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may find after some time that your pet is very tolerant of the collar. If so, you may relax some of these precautions. It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed. Important Safety Information 12 Table of ContentsComponents Remote Transmitter USB Cable Strap User Manual Receiver Collar Test Bulb Components 4 How the System Works 5 Key Features 6 Definition of the Product 7 Operating Guide 9 • How to Turn the Remote Training Collar On/Off 9 • How the Transmitter Buttons Work 10 • How to Fit the Receiver Collar 11 • How to Find the Best Vibration/Shock Level for Your Pet 13 • How to Maximize the Distance 14 • Charging the Device 15 • How to Pair the Remote Transmitter & Receiver Collar 17 • How to Test the Functions 18 General Training Guide 19 Frequently Asked Questions 20 Trouble Shooting 21 FCC 22 Reference Size for Different Dogs 23 Steel Probe x 4Silicone Covers x 4 34 How the System WorksKey Features 1. Separated function buttons on Remote Transmitter, easy for training. 2. Receiver Collar Waterproof Guaranteed, no problem for short time swimming. 3. 16 levels shock & 8 levels vibration, provides behavior correction for more dogs. 4. Receiver Collar low battery indicating & charging indicating. 5. Rechargeable with High Quality Lithium Battery, with work time twice Increased. The Remote Training Collar is easy to use with an advanced digital display that tells you exactly what level of stimulation you are using. This Remote Training Collar assists you in controlling your pet without a leash in a designed remote range. At the push of a button, your remote sends a signal activating your dog's Receiver Collar. He receives a safe but annoying stimulation. He'll quickly learn the association between his behavior and your correction; in no time, you'll have a better-behaved pet. The Remote Training Collar has been proven safe, comfortable, and effective for both small and large dog breeds. Using the Remote Trainer consistently and correctly, any basic obedience commands can be taught and many misbehaviors that your pet exhibits can be corrected. 56 Definition of the Product Vibration Button Shock Button Beep Button Antenna LED Indicator LED Indicator Magnetic Charging Port Contact Point Charging Jack Power ON/OFF Button (Pairing Button) Level Down Channel Select / Lock Level Up Remote Transmitter Receiver Collar Shock LevelWarning Vibration LevelBeep Channel Transmitter Battery State Receiver Collar Battery State Notes: The hexagon hole on the Test Bulb can be used to fasten or unfasten the Probes to contact points. Contact Point Stainless Steel Probe Conductive Probe Cover Safety Tips This product is not intended for use on dogs under 6 months old or less than 8 pounds. This product must NOT be used on aggressive dogs. If you are unsure if this product is appropriate for your pet, please consult your veterinarian or a certified trainer. Lock 78 1. Press / / once to send a beep, vibration and shock command to Receiver Collar. The correspo…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2020/12/18> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AX92-P19 P19 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： San Lee/CEO Company: Shenzhen Senyutong Technology Co., LTD Address: F3, Building 2, Langtian Science park, No.506 Donghuan Road, Shajing, Shenzhen, Guangdong, China Phone: 86(0755)27800363 Fax: 86(0755)27800363 E-Mail: [email protected]

Shenzhen Senyutong Technology Co., LTD F3, Building 2, Langtian Science park, No.506 Donghuan Road, Shajing, Shenzhen, Guangdong, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2020/12/18 To whom it may concern: We, Shenzhen Senyutong Technology Co., LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AX92-P19 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： San Lee/CEO Company: Shenzhen Senyutong Technology Co., LTD Address: F3, Building 2, Langtian Science park, No.506 Donghuan Road, Shajing, Shenzhen, Guangdong, China Phone: 86(0755)27800363 Fax: 86(0755)27800363 E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 TX RX X SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.7 Fig.8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.9 Fig.10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.11 Fig.12 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.13 Fig.14

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Label and Location Size: L2.0cm*W1.5cm Label Location Training Collar Model No.: P19 FCC ID: 2AX92-P19

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 INTERIOR PHOTOGRAPHS Fig.1 Fig.2 TX SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.3 Fig.4 Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Fig.5 Fig.6

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Report No.: LCS201120059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 31 FCC TEST REPORT FOR Shenzhen Senyutong Technology Co., LTD Training Collar Test Model: P19 Prepared for : Shenzhen Senyutong Technology Co., LTD Address : F3, Building 2, Langtian Science park, No.506 Donghuan Road, Shajing, Shenzhen, Guangdong, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : November 23, 2020 Number of tested samples : 2 Sample number : 201120059A-1, 201120059A-2 Date of Test : November 23, 2020 ~ December 07, 2020 Date of Report : December 10, 2020 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Report No.: LCS201120059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 31 FCC TEST REPORT FCC CFR 47 PART 15 C (15.249) Report Reference No. ................. : LCS201120059AEA Date of Issue................................... : December 10, 2020 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd.. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Shenzhen Senyutong Technology Co., LTD Address ........................................... : F3, Building 2, Langtian Science park, No.506 Donghuan Road, Shajing, Shenzhen, Guangdong, China Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.249) / ANSI C63.10: 2013 Test Report Form No. ..................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Training Collar Trade Mark ..................................... : N/A Test Model ...................................... : P19 Ratings ............................................ : Input: DC 5V, 1A DC 3.7V by Rechargeable Li-ion Battery, 300mAh Result ........................................... : Positive Compiled by: Supervised by: Approved by: Vera Deng/ File administrators Jin Wang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Report No.: LCS201120059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 31 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS201120059AEA December 10, 2020 Date of issue Test Model.............................. : P19 EUT......................................... : Training Collar Applicant............................... : Shenzhen Senyutong Technology Co., LTD Address.................................. : F3, Building 2, Langtian Science park, No.506 Donghuan Road, Shajing, Shenzhen, Guangdong, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Senyutong Technology Co., LTD Address................................... : F3, Building 2, Langtian Science park, No.506 Donghuan Road, Shajing, Shenzhen, Guangdong, China Telephone............................... : / Fax.......................................... : / Factory................................... : / Address................................... : / Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Report No.: LCS201120059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 31 Revision History Revision Issue Date Revisions Revised By 000 December 10, 2020 Initial Issue Gavin Liang SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 Report No.: LCS201120059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 31 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................... 6 1.1 Description of Device (EUT) ......................................................................................................... 6 1.2. Support Equipment List ................................................................................................................ 6 1.3. External I/O .................................................................................................................................... 6 1.4. D…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 _______________________________________________________________________________________________ 7. TEST SETUP PHOTOGRAPHS Photo of Radiated Emissions Measurement Below 1 GHz Above 1 GHz SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AX92-P19 _______________________________________________________________________________________________ Power Line Conducted Emission