2AXCGMKTR07763Night Light Baby InSight Pivot Car Mirror

KEEP FOR FUTURE REFERENCE CONSERVER POUR RÉFÉRENCE FUTURE CONSERVAR PARA CONSULTAS FUTURAS MKTR0776 REV 3 CCD-0286-000 REV 3 Owner’s Manual Manuel d'utilisation Manual de instrucciones Night Light ™ Baby In-Sight ® Pivot Car Mirror Rétroviseur pivotant Espejo giratorio para auto Contents | Contenu | Contenido Contents | Contenu | Contenido 23 IMPORTANT INFORMATION Warning ..................................................................................................................................................5 INCLUDED PARTS Included Parts .......................................................................................................................................6 HOW TO USE How To Install Batteries .....................................................................................................................7 How To Install .......................................................................................................................................9 How To Use .........................................................................................................................................10 How To Clean .......................................................................................................................................11 IMPORTANT INFORMATION FCC Information ...................................................................................................................................12 CUSTOMER SERVICE Contact Us ............................................................................................................................................12 INFORMATION IMPORTANTE Attention ...............................................................................................................................................14 PIÈCES INCLUSES Pièces incluses.....................................................................................................................................15 MODE D'EMPLOI Comment installer les piles.............................................................................................................16 Installation ..........................................................................................................................................18 Mode d'emploi ...................................................................................................................................19 Nettoyage ............................................................................................................................................20 INFORMATION IMPORTANTE Information relative à la FCC ............................................................................................................21 SERVICE À LA CLIENTÈLE Contactez-nous ...................................................................................................................................21 INFORMACIÓN IMPORTANTE Advertencia .........................................................................................................................................23 PIEZAS INCLUIDAS Piezas incluidas ..................................................................................................................................24 MODO DE EMPLEO Instalación de las pilas .....................................................................................................................25 Instrucciones de instalación ............................................................................................................27 Modo de empleo ................................................................................................................................28 Limpieza ...............................................................................................................................................29 INFORMACIÓN IMPORTANTE Información de la FCC .......................................................................................................................30 SERVICIO AL CLIENTE Contacto ...............................................................................................................................................30 Important Information 5 IMPORTANT SAFEGUARDS WARNING: • Always ensure that mirror is properly secured on the headrest. Check frequently. • Prevent strangulation or entanglement. Never place in or attach to a crib. Never add strings or ties to the mirror. Never leave child unattended. • Keep mirror out of baby‘s reach. Always follow car seat manufacturer‘s directions for correct installation and position of child safety seat. • Do not operate while driving vehicle. • Contains button or coin cell battery. Hazardous if swallowed. A swallowed battery can cause internal chemical burns in as little as two hours and lead to death. Dispose of used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. ENGLISH ANGLAIS INGLÉS How to Use How to Use 7 Included Parts 6 REMOTE CONTROL ŠBACKŒ m n REMOTE CONTROL ŠFRONTŒ MIRROR ŠFRONTŒMIRROR ŠBACKŒ e df h i j k g a. Frame b. Mirror c. LED Lighting d. ON/OFF Switch e. OFF (O) f. ON ( I ) g. Buckle h. Battery Compartment i. Base j. Straps k. Buckle l. Night Light ON/OFF m. Visor Clip n. Battery Compartment (CR2032 battery included) HOW TO INSTALL BATTERIES l a c b BATTERY WARNING This product contains a CR2032, 3VDC coin battery. A coin battery can cause serious internal chemical burns if swallowed. • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate. Even used batteries may cause severe injury or death. • Call a local poison control center for treatment information. • Non-rechargeable batteries are not to be recharged. • Do not force discharge, recharge, disassemble, heat above 176°F (80°C) or inc…

Text truncated - open the document above for the full version.

External Photographs Page 2 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-1 View of EUT-2 Page 3 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-3 View of EUT-4 Page 4 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-5 View of EUT-6

The label is laser-engraved on the product surface.

Internal Photographs Page 2 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Internal View of EUT-1 Internal View of EUT-2 Page 3 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Internal View of EUT-3 Internal View of EUT-4 Antenna Page 4 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . Internal View of EUT-5

FCC ID: 2AXCGMKTR07763 According to 447498 D04 Interim General RF Exposure Guidance v01, 2.1.4 MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna gain and the delivered maximum time-averaged power.10 For this case, a RF source is an RF exempt device if its ERP (watts) is no more than a frequency-dependent value, as detailed tabular form in Appendix B. These limits have been derived based on the basic specifications on Maximum Permissible Exposure (MPE) considered for the FCC rules in § 1.1310(e)(1). B.4 SAR-based Exemption SAR-based thresholds are derived based on frequency, power, and separation distance of the RF source. The formula defines the thresholds in general for either available maximum time- averaged power or maximum time-averaged ERP, whichever is greater. If the ERP of a device is not easily determined, such as for a portable device with a small form factor, the applicant may use the available maximum time-averaged power exclusively if the device antenna or radiating structure does not exceed an electrical length of λ/4. As for devices with antennas of length greater than λ/4 where the gain is not well defined, but always less than that of a half-wave dipole (length λ/2), the available maximum time-averaged power generated by the device may be used in place of the maximum time-averaged ERP, where that value is not known. The separation distance is the smallest distance from any part of the antenna or radiating structure for all persons, during operation at the applicable ERP. In the case of mobile or portable devices, the separation distance is from the outer housing of the device where it is closest to the antenna. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2). and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). The example values shown in Table B.2 are for illustration only. 1. SAR test exclusion threshold for 433 MHz is 22 mW. - Based on field strength 71.48 dBuV/m at 3m transmit power(eirp) of the device, the maximum EIRP is -23.72dBm, the ERP = EIRP – 2.15 = 26.22 dBm = 0.0024 mW. Conducted power=EIRP-antenna gain = -23.72 - 0 = -23.72 dBm = 0.0042 mW. - When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2. Conclusion: No SAR is required.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. CFR 47 FCC PART 15 SUBPART C ISED RSS-210 ISSUE 11 CERTIFICATION TEST REPORT For Night Light Baby In-Sight Pivot Car Mirror MODEL NUMBER: MKTR-0776 REPORT NUMBER: 4792358924-1-RF-1 ISSUE DATE: September 7, 2026 FCC ID: 2AXCGMKTR07763 IC: 26423-MKTR07763 Prepared for Munchkin Inc. 7835 Gloria Ave, Van Nuys CA 91406, USA Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792358924-1-RF-1 Page 2 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0057 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 September 7, 2026 Initial Issue REPORT NO.: 4792358924-1-RF-1 Page 3 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0057 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Clause Test Items FCC Rules Test Results 1 Transmitter Timeout CFR 47 FCC §15.231 (a) (1) ISED RSS-210 Annex A.1.2 Pass 2 20 dB Bandwidth and 99 % Occupied Bandwidth CFR 47 FCC §15.231 (c) ISED RSS-210 Annex A.1.4 Pass 3 Radiated Emission CFR 47 FCC §15.231 (b)(e) CFR 47 FCC §15.205 and §15.209 RSS-210 Annex A.1.3 RSS-GEN Clause 8.9 RSS-GEN Clause 8.10 Pass 4 AC Power Line Conducted Emission ANSI C63.10-2013, Clause 6.2 N/A 5 Antenna Requirement CFR 47 FCC §15.203 ISED RSS-Gen Clause 6.3 Pass Note 1: This test report is only published to and used by the applicant, and it is not for evidence purpose in China. Note 2: The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C and ISED RSS-210 ISSUE 11> when <Accuracy Method> decision rule is applied. Note 3: N/A: Not applicable in this report. The device is powered by battery and cannot be charged. REPORT NO.: 4792358924-1-RF-1 Page 4 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0057 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 5 2. TEST METHODOLOGY ........................................................................................................ 6 3. FACILITIES AND ACCREDITATION .................................................................................... 6 4. CALIBRATION AND UNCERTAINTY .................................................................................. 7 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................... 7 4.2. MEASUREMENT UNCERTAINTY ................................................................................ 7 5. EQUIPMENT UNDER TEST ................................................................................................. 8 5.1. DESCRIPTION OF EUT ................................................................................................ 8 5.2. MAXIMUM FIELD STRENGTH ..................................................................................... 8 5.3. DESCRIPTION OF AVAILABLE ANTENNAS ............................................................... 8 5.4. TEST ENVIRONMENT .................................................................................................. 8 5.5. DESCRIPTION OF TEST SETUP ................................................................................. 9 5.6. MEASURING INSTRUMENT AND SOFTWARE USED ............................................. 10 6. ANTENNA PORT TEST RESULTS .................................................................................... 11 6.1. ON TIME AND DUTY CYCLE ..................................................................................... 11 6.2. TRANSMITTER TIMEOUT .......................................................................................... 14 6.3. 20 dB BANDWIDTH AND 99 % OCCUPIED BANDWIDTH ........................................ 17 6.4. RADIATED TEST RESULTS ...................................................................................... 20 6.4.1. FIELD STRENGTH OF INTENTIONAL EMISSIONS .......................................... 27 6.4.2. SPURIOUS EMISSIONS BELOW 1 GHz AND ABOVE 30 MHz ........................ 29 6.4.3. SPURIOUS EMISSIONS ABOVE 1 GHz ............................................................ 31 6.4.4. SPURIOUS EMISSIONS BELOW 30 MHz ......................................................... 33 7. ANTENNA REQUIREMENTS ............................................................................................. 36 REPORT NO.: 4792358924-1-RF-1 Page 5 of 36 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0057 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Munchkin Inc. Address: 7835 Gloria Ave, Van Nuys CA 91406, USA Manufacturer Information Company Name: Munchkin Inc. Address: 7835 Gloria Ave, Van Nuys CA 91406, USA EUT Information EUT Name: Night Light Baby In-Sight Pivot Car Mirror Model: MKTR…

Text truncated - open the document above for the full version.

Antenna specification： Frequency (MHz) Antenna Type Antenna Gain (dBi) 433.92 Line antenna 0 Antenna size： The width of the antenna：0.889mm The length of the antenna：183.399mm All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Appendix II Setup Photographs RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) MEASUREMENT POSITION MEASUREMENT POSITION (X axis) MEASUREMENT POSITION (Y axis) MEASUREMENT POSITION (Z axis) RADIATED RF MEASUREMENT SETUP (30MHz~1GHz) RADIATED RF MEASUREMENT SETUP (Below 30MHz)