2AXCH665356TXFlip & Lightup Stunt Car

FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.

1(2) Date: 01 Sep 2020 Attention: Application Examiner Re: Request for confidentiality Applicant: The Hamleys Group Ltd FCC ID: 2AXCH665356TX To whom it may concern, Permanent Confidentiality Request is hereby submitted by The Hamleys Group Ltd to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) & 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block Diagrams  Detailed Operational/Functional Description Rationale for request for confidentiality: The Hamleys Group has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [For FCC certification; delete for TCB certification: The fee for confidentiality has been submitted along with the fee for certification.] If you have questions or need further information, please contact the undersigned. Sincerely, 2(2) Calvin Poon QA & International Compliance Manager The Hamleys Group Ltd

INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Equipment Photographs (External) INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Equipment Photographs (External)

Label Size and location for item FCC ID 2AXCH665356TX Size – 7 mm x 33 mm Option A

INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Equipment Photographs (Internal) INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Equipment Photographs (Internal)

Analysis Report The Equipment Under Test (EUT), is a portable 2.4GHz Transceiver (Controller Unit) for a RC car. The sample supplied operated on 71 channels, normally at 2407 - 2477MHz. The channels are separated with 1MHz channel spacing. The EUT is powered by 2 x 1.5V AA batteries. After switch on the EUT, the car will be moved forward or backward and turned left and right based on the switches pressed in the controller. Antenna Type: Internal, Integral antenna Antenna Gain: 0dBi Nominal rated field strength is 98.3dBμV/m at 3m (Peak), 71.2dBμV/m at 3m (Average) Maximum allowed production tolerance: +/- 3dB According to the KDB 447498: Based on the maximum average field strength of production tolerance was 74.2dBμV/m at 3m in frequency 2.445GHz. Thus, it below calculated field strength according to minimum SAR exclusion threshold level as follows: The worst case of SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.483.5) mW = 9.52 mW According to the KDB 412172 D01: EIRP = [(FS*D) ^2*1000 / 30] Calculated Field Strength for 9.52mW is 105dBuV/m @3m Since maximum average field strength plus production tolerance < = 105dBuV/m @3m and antenna gain is > = 0.0dBi, it is concluded that maximum Conducted Power and Field Strength are well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing.

2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 16 TEST REPORT Report No.: 20070800HKG‐001 The Hamleys Group Ltd. Application For Certification (Original Grant) FCC ID: 2AXCH665356TX Transceiver Prepared and Checked by: Approved by: Signed On File Lee For Yiu, Florey Assistant Engineer Wong Kwok Yeung, Kenneth Senior Lead Engineer Date: August 31, 2020 TEST REPORT The Hamleys Group Ltd. Intertek Report No: 20070800HKG‐001 Page 2 of 16 GENERAL INFORMATION Grantee: The Hamleys Group Ltd. Grantee Address: 2 Fouberts Place, Off Regent Street, London, United Kingdom Contact Person: Calvin Poon Tel: 852 36114801 Fax: N/A e‐mail: N/A Manufacturer: Dihua Toys Manufacturer Address: No.1 Leshan Road, Shantou, China Brand Name: Ralleyz Model: 665356 Client Reference No.: 649517, 649525, 665356 Type of EUT: Transceiver Description of EUT: Flip & Lightup Stunt Car Serial Number: N/A FCC ID: 2AXCH665356TX Date of Sample Submitted: July 16, 2020 Date of Test: July 16, 2020 to August 28, 2020 Report No.: 20070800HKG‐001 Report Date: August 31, 2020 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 Certification. TEST REPORT The Hamleys Group Ltd. Intertek Report No: 20070800HKG‐001 Page 3 of 16 SUMMARY OF TEST RESULT Test Specification Reference Results Radiated Emission Radiated Emission on the Bandedge 15.249, 15.209 Pass Radiated Emission in Restricted Bands 15.205 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2019 Edition Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. TEST REPORT The Hamleys Group Ltd. Intertek Report No: 20070800HKG‐001 Page 4 of 16 TABLE OF CONTENTS 1.0 GENERAL DESCRIPTION ................................................................................................5 1.1 Product Description .................................................................................................5 1.2 Related Submittal(s) Grants......................................................................................5 1.3 Test Methodology....................................................................................................5 1.4 Test Facility ..............................................................................................................5 2.0 SYSTEM TEST CONFIGURATION.....................................................................................6 2.1 Justification..............................................................................................................6 2.2 EUT Exercising Software...........................................................................................6 2.3 Special Accessories...................................................................................................6 2.4 Measurement Uncertainty.......................................................................................6 2.5 Support Equipment List and Description ..................................................................6 3.0 EMISSION RESULTS.......................................................................................................7 3.1 Field Strength Calculation.........................................................................................7 3.2 Radiated Emission Configuration Photograph...........................................................8 3.3 Radiated Emission Data............................................................................................8 4.0 EQUIPMENT PHOTOGRAPHS ......................................................................................12 5.0 PRODUCT LABELLING..................................................................................................12 6.0 TECHNICAL SPECIFICATIONS .......................................................................................12 7.0 INSTRUCTION MANUAL..............................................................................................12 8.0 MISCELLANEOUS INFORMATION ................................................................................13 8.1 Radiated Emission on the Bandedge..........................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE FCC ID: 2AXCH665356TX Configuration Photographs Worst-Case Radiated Emissions (Back View)