2AXET-TL181Dongle

无线鼠标说明书 1. 包装内容 无线鼠标、usb无线接收器、AA电池、使用说明书 2. 技术参数 无线频率2.4G，接口类型usb，电池要求AA碱性 3. 系统要求 window系统 MAC系统 4. 安装说明 鼠标底部电池槽，取出接收器插入电脑usb接口，等待15秒，电池装入鼠标，打开开 关即可使用。 Wireless Mouse Cookbook 1. Packaging content wireless mouse, usb wireless receiver, AA battery, instruction manual 2. Technical parameters Wireless frequency 2.4G, interface type usb, battery requirements AA alkaline 3. The system requires the window system MAC system 4. Installation Instructions The bottom battery compartment of the mouse, remove the receiver plug into the computer usb interface, wait 15 seconds, the battery loaded into the mouse, turn on the switch to use. FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Confidentiality v02 Page 1 of 1 Huizhou Zhihang Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AXET-TL181 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name 1. Block Diagram, 2. Schematics, 3. Operational Description 1. 2AXET-TL181 -Block diagram 2. 2AXET-TL181 -SCH 3. 2AXET-TL181 -Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of xxxx (ie- “45”, “90” or “180”) days: Exhibit Type File Name N/A N/A Signature: Contact name: Yu Hua Wen Company name: Huizhou Zhihang Technology Co.,Ltd. Address: 3/F,building a,Dabang Science Park,Yuechang village,Xinxu Town,Huiyang District, Huizhou

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Authorization v02 Page 1 of 1 Huizhou Zhihang Technology Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/9/10 SUBJECT: FCC Application for (FCC ID: 2AXET-TL181) To Whom It May Concern: We, the undersigned, hereby authorize Alisa Feng in Shenzhen Huaxia Testing Technology Co., Ltd at 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen Huaxia Testing Technology Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, (Must be signed by the person that is listed on the FCC Website) Signature: Contact name: Yu Hua Wen Company name: Huizhou Zhihang Technology Co.,Ltd. Address: 3/F,building a,Dabang Science Park,Yuechang village,Xinxu Town,Huiyang District,Huizhou

FCC ID:2AXET-TL181 FCC ID:2AXET-TL181 FCC ID:2AXET-TL181

FCC ID:2AXET-TL181 FCC ID:2AXET-TL181

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200800934E-02 Applicant: Huizhou Zhihang Technology Co.,Ltd. Address of Applicant: 3/F,building a, Dabang Science Park, Yuechang village, Xinxu Town, Huiyang District, Huizhou City Equipment Under Test (EUT): EUT Name: dongle Model No.: TL-180 Brand Name: N/A FCC ID: 2AXET-TL181 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-08-27 Date of Test: 2020-08-27 to 2020-09-09 Date of Issue: 2020-09-09 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： ( Tiny You ) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-02 Page:2 of 6 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200800934E-02 Rev.01 Initial report 2020-09-09 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-02 Page:3 of 6 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION ......................................................................................................................................4 3.1 CLIENT INFORMATION ...............................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT ...............................................................................................................................4 4 RF EXPOSURE EVALUATION ................................................................................................................................5 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................5 4.1.1 Standard Requirement .................................................................................................................................5 4.1.2 Limits ..............................................................................................................................................................5 4.2 EUT RF EXPOSURE EVALUATION .............................................................................................................................6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-02 Page:4 of 6 3 General Information 3.1 Client Information Applicant: Huizhou Zhihang Technology Co.,Ltd. Address of Applicant: 3/F,building a, Dabang Science Park, Yuechang village, Xinxu Town, Huiyang District, Huizhou City Manufacturer: Huizhou Zhihang Technology Co.,Ltd. Address of Manufacturer: 3/F,building a, Dabang Science Park, Yuechang village, Xinxu Town, Huiyang District, Huizhou City Factory: Huizhou Zhihang Technology Co.,Ltd. Address of Factory: 3/F,building a, Dabang Science Park, Yuechang village, Xinxu Town, Huiyang District, Huizhou City 3.2 General Description of EUT Product Name: dongle Model No.: TL-180 Trade Mark: N/A Hardware Version: V7.0 Software Version: V69 Frequency Range: 2402MHz ~ 2480MHz Modulation Type: GFSK Number of Channels: 40 (declared by the client) Sample Type: Mobile Portable Fix Location Test Software of EUT: RF test (manufacturer declare) Antenna Type: PCB antenna Antenna Gain: -2.36dBi Power Supply: DC 5V Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-02 Page:5 of 6 4 RF Exposure Evaluation 4.1 RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 4.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-02 Page:6 of 6 4.2 EUT RF Exposure Evaluation 1) For 2.4G eirp = pt x gt = (E x d) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, ---10 ((dBμV/m)/20) /10 6 , d = measurement distance in meters (m)---3m, So pt = (E x d) 2 /30 / gt The worst c…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 Test Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200800934E-01 Applicant: Huizhou Zhihang Technology Co.,Ltd. Address of Applicant: 3/F,building a, Dabang Science Park, Yuechang village, Xinxu Town, Huiyang District, Huizhou City Equipment Under Test (EUT): EUT Name: dongle Model No.: TL-180 Brand Name: N/A FCC ID: 2AXET-TL181 Standards: 47 CFR Part 15, Subpart C Date of Receipt: 2020-08-27 Date of Test: 2020-08-27 to 2020-09-09 Date of Issue: 2020-09-09 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： ( Tiny You ) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-01 Page:2 of 32 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200800934E-01 Rev.01 Initial report 2020-09-09 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-01 Page:3 of 32 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203 ANSI C63.10 (2013) PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 (2013) PASS Field Strength of the Fundamental Signal 47 CFR Part 15, Subpart C Section 15.249 (a) ANSI C63.10 (2013) PASS Spurious Emissions 47 CFR Part 15, Subpart C Section 15.249 (a)/15.209 ANSI C63.10 (2013) PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.249(a)/15.205 ANSI C63.10 (2013) PASS 20dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.215 (c) ANSI C63.10 (2013) PASS Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200800934E-01 Page:4 of 32 3 Contents Page 1 VERSION .................................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 3 3 CONTENTS .............................................................................................................................................................. 4 4 GENERAL INFORMATION ................................................................................................................................... 5 4.1 CLIENT INFORMATION ............................................................................................................................................ 5 4.2 GENERAL DESCRIPTION OF EUT ............................................................................................................................ 5 4.3 TEST ENVIRONMENT AND MODE ............................................................................................................................ 7 4.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................... 7 4.5 STATEMENT OF THE MEASUREMENT UNCERTAINTY ................................................................................................ 8 4.6 TEST LOCATION ...................................................................................................................................................... 9 4.7 TEST FACILITY ....................................................................................................................................................... 9 4.8 DEVIATION FROM STANDARDS ............................................................................................................................... 9 4.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................... 9 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ..................................................................................... 9 4.11 EQUIPMENT LIST .............................................................................................................................................. 10 5 TEST RESULTS AND MEASUREMENT DATA .............................................................................................. 11 5.1 ANTENNA REQUIREMENT ..................................................................................................................................... 11 5.2 CONDUCTED EMISSIONS ....................................................................................................................................... 12 5.3 RADIATED EMISSION ............................................................................................................................................ 15 5.4 20DB BANDWIDTH ............................................................................................................................................... 23 6 PHOTOGRAPHS ................................................................................................................................................... 26 6.1 RADIATED EMISSION TEST SETUP ........................................................................................................................ 26 6.2 CONDUCTED EMISSION TEST SETUP ..................................................................................................................... 27 6.3 EUT CONSTRUCTIONAL DETAILS .....................................................…

Text truncated - open the document above for the full version.

FCC ID:2AXET-TL181 1 Photographs 1.1 Radiated Emission Test Setup 9kHz~30MHz 30MHz~1GHz: FCC ID:2AXET-TL181 Above 1GHz: 1.2 Conducted Emission Test Setup