2AXFOL08Selfie stick

DATE: 2020.09.02 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Mr Liu ze of Shenzhen United Testing Technology Co., Ltd. / 2F, Annex Bldg, Jiahuangyuan Tech Park, #365 Baotian 1 Rd, Tiegang Community, Xixiang Str, Bao'an District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Bennison LTD./16F., No. 89, Aly. 3, Ln. 182, Sec. 2, Wenhua Rd., Banqiao Dist., New Taipei Taiwan (Applicant Name and address) Name: Jerry Lee Title: Manager Company: Bennison LTD.

DATE : 2020.09.02 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AXFOL08 Product Name: Selfie stick Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Name: Jerry Lee Title: Manager Company: Bennison LTD.

Model Difference Declaration To Whom It May Concern, We, Bennison LTD. Product Name: Selfie stick Trade Mark: N/A Model Number: L08, L02, L03, L05, L06, L07, L09, L10, L11, L12, L13, L15, L16, L17, L18, L19, L20 All model’s the function, software and electric circuit are the same, only with a product color and model named different. Test sample model: L08. Please contact me if you have any question. Name: Jerry Lee Date: Sep. 02, 2020 Title: Manager Signature of applicant:

Model: L08 Model: L08 Model: L08

FCC ID LABEL: Label Location: FCC ID: 2 AXFOL08 Product Na me: Se lfie stick Model Na me: L08 This device complies with Part 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1)This device may not cause har mful interference, and (2)This device must accept any interference received, including interference that may cau se undesired operation. Long: 3cm Width: 2cm

Model: L08 Model: L08 Model: L08 PCB Antenna

RF Exposure evaluation According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10- g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m Sopt = (EXd) 2 /30 x gt Ant gain=-3.01dBi; so Ant numeric gain=0.5 Field strength =77.11dBμV/m@3m So Pt={ [10^(77.11/20)/10^6 x3]^2/30x 0.5}x1000 mW=0.031 mW So (0.031 mW/5mm)x √2.440 GHz = 0.01 < 3 Then SAR evaluation is not required

Page 1 of 28 Report No.: UNIA20080536ER-01 FCC RADIO TEST REPORT FCC ID: 2AXFOL08 Product Name Selfie stick Trade Mark N/A Main Model L08 Additional Model L02, L03, L05, L06, L07, L09, L10, L11, L12 , L13, L15, L16, L17, L18, L19, L20 Report No. UNIA20080536ER-01 Prepared for Bennison LTD. 16F., No. 89, Aly. 3, Ln. 182, Sec. 2, Wenhua Rd., Banqiao Dist., New Taipei, 220, Taiwan Prepared by Shenzhen United Testing Technology Co., Ltd. 2F, Annex Bldg, Jiahuangyuan Tech Park, #365 Baotian 1 Rd, Tiegang Community, Xixiang Str, Bao'an District, Shenzhen, China Page 2 of 28 Report No.: UNIA20080536ER-01 TEST RESULT CERTIFICATION Applicant .............................. : Bennison LTD. Address ................................. : 16F., No. 89, Aly. 3, Ln. 182, Sec. 2, Wenhua Rd., Banqiao Dist., New Taipei, 220, Taiwan Manufacturer ........................ : SHENZHEN YUANSU CHUANGDA TECHNOLOGY CO., LTD Address ................................. : Room 533, Huamei Building, Zhenxing Road, Futian District, Shenzhen City, China Product description Product Name .............................. : Selfie stick Trade Mark ............................ : N/A Model Name .......................... : L08, L02, L03, L05, L06, L07, L09, L10, L11, L12, L13, L15, L16, L17, L18, L19, L20 Test Methods ........................ : FCC Rules and Regulations Part 15 Subpart C Section 15.249, ANSI C63.10: 2013 This device described above has been tested by Shenzhen United Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of UNI, this document may be altered or revised by Shenzhen United Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. Date of Test ..........................................: Date (s) of performance of tests .............: Aug. 05, 2020 ~ Sep. 02, 2020 Date of Issue ........................................: Sep. 02, 2020 Test Result ............................................: Pass Prepared by: Bob liao/Editor Reviewer: Kahn yang/Supervisor Approved & Authorized Signer: Liuze/Manager Page 3 of 28 Report No.: UNIA20080536ER-01 Table of Contents Page 1 TEST SUMMARY 4 2 GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 CARRIER FREQUENCY OF CHANNELS 7 2.3 TEST MODE7 2.4 TEST SETUP 7 2.5 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL 8 2.6 MEASUREMENT INSTRUMENTS LIST 9 3 CONDUCTED EMISSION 10 3.1 TEST LIMIT 10 3.2 TEST SETUP 10 3.3 TEST PROCEDURE 11 3.4 TEST RESULT 11 4 RADIATED EMISSION 12 4.1 TEST LIMIT 12 4.2 TEST SETUP 13 4.3 TEST PROCEDURE 14 4.4 TEST RESULT 14 5 BAND EDGE 21 5.1 TEST LIMIT 21 5.2 TEST PROCEDURE 21 5.3 TEST RESULT 21 6 OCCUPIED BANDWIDTH 24 6.1 TEST SETUP 24 6.2 TEST PROCEDURE 24 6.4 TEST RESULT 24 7 ANTENNA REQUIREMENT 26 8 PHOTO OF TEST 27 8.1 RADIATED EMISSION 27 8.2 CONDUCTED EMISSION 28 Page 4 of 28 Report No.: UNIA20080536ER-01 1 TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS ITEM STANGARD RESULT CONDUCTED EMISSION FCC Part 15.207 N/A RADIATED EMISSION FCC Part 15.209/15.249 COMPLIANT BAND EDGE FCC Part 15.249/15.205 COMPLIANT OCCUPIED BANDWIDTH FCC Part 15.249 COMPLIANT ANTENNA REQUIREMENT FCC Part 15.203 COMPLIANT 1.2 TEST FACILITY Test Firm : Shenzhen United Testing Technology Co., Ltd. Address : 2F, Annex Bldg, Jiahuangyuan Tech Park, #365 Baotian 1 Rd, Tiegang Community, Xixiang Str, Bao'an District, Shenzhen, China The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19.The testing quality system of our laboratory meets with ISO/IEC-17025 requirements. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: A2LA Certificate Number: 4747.01 The EMC Laboratory has been accredited by A2LA, and in compliance with ISO/IEC 17025:2017 General Requirements for testing Laboratories. FCC Registration Number: 674885 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. IC Registration Number: 21947 The EMC Laboratory has been registered and fully described in a report filed with the (IC) Industry Canada. Page 5 of 28 Report No.: UNIA20080536ER-01 1.3 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. A. Conducted Measurement: Test SiteMethodMeasurement Frequency RangeU, (dB)NOTE UNI ANSI 9kHz ~ 150kHz 2.96 150kHz ~ 30MHz 2.44 B. Radiated Measurement: Test Site Method Measurement Frequency Range U, (dB) NOTE UNI ANSI 9kHz ~ 30MHz 2.50 30MHz ~ 1000MHz 4.80 1000MHz ~ 6000MHz 4.13 Page 6 of 28 Report No.: UNIA20080536ER-01 2 GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Selfie stick Trade Mark: N/A Main Model: L08 Additional Model: L02, L03, L05, L06, L07, L09, L10, L11, L12, L13, L15, L16, L17, L18, L19, L20 Model Difference: same, only with a product color and model named different. Test sample model: L08. FCC ID: 2AXFOL08 Operation Frequency: 2402MHz~2480MHz Number of Channels: 40CH Modulation Type: GFSK Antenna Type: PCB Antenna Antenna Gain: -3.01dBi Battery: CR1632 Adapter: N/A Power Source: DC 3V from Battery Page 7 of 28 Report No.: UNIA20080536ER-01 2.2 CARRIER FREQUENCY OF CHANNELS Channel List Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 00 2402 10 2422 20 2442 30 2462 01 2404 11 2424 21 2444 31 2464 02 2406 12 2426 22 2446 32 2466 03 2408 13 2428 23 2448 33 2468 04 2410 14 2430 24 2450 34 2470 05 2412 15 2432 25 2452 35 2472 06 2414 16 2434 26 2454 36 2474 07 2416 17 2436 27 2456 37 2476 08 2418 18 2438 28 2458 38 2478 09 2420 19 2440 29 2…

Text truncated - open the document above for the full version.

Model: L08 Radiated Emission test Model: L08 Conducted Emission test N/A