2AXH6-CFSLITEFilament Management System

V 1 . 0 CFS lite Quick StaDž Guide Note: Do not power on the printer before installation is complete. Please read this guide carefully before using the product. 1 / Packing List DesiccantPTFE tube (Spare) 45 123 CFS lite6-pin 485 cablePTFE tube (for CFS lite) * The above list is for reference only. Please refer to the actual items received. 2 / Install the CFS lite 2.1 Connect the Printer and CFS lite 1 2 3 4 876 mm 468mm Place the CFS lite on the left side of the i7.The recommended distance between the CFS lite and i7 is 80 mm, as shown. 1 As shown, inseDž the two longer PTFE tubes into poDžs 1 and 4 on both sides of the CFS lite, and the two shoDžer PTFE tubes into the middle poDžs 2 and 3. Please ensure they are fully inseDžed. 2 Clip the Toolhead data cable into the tube hub. Note: Do not skip this step to avoid damage during use. 3 InseDž the other ends of the four PTFE tubes into the Toolhead ǁlament hub. 4 Yellow: shoDžer PTFE tubes Green: longer PTFE tubes Gray: Toolhead data cable 80 mm PTFE Tube Hub 2.2 Place the Desiccant Unlock the front door latch and open the front door of the CFS lite forward. 1 Tear open the desiccant package and place the desiccant at the position indicated by the arrow. 2 Slide the latch to the right to unlock the front door. Tear open the desiccant package. 2.3 Power On Use the 6-pin 485 connection cable to connect the i7 and CFS lite. 1 Please leave enough space to avoid collision with the heated bed. 2 ≥743mm ≥200mm ≥120mm 3 / First Print Experience 3.1 Printing with CFS lite InseDž the ǁlament into the CFS lite feed poDž, and it will automatically load. 1 Go to the Filament page and tap the Edit button to modify ǁlament information. * If using non-RFID ǁlament, you need to set the parameters manually: * If using RFID ǁlament, CFS lite will automatically recognize the ǁlament information. Tap View to check ǁlament details： 2 a. When the ǁlament shows a question mark, tap Edit. c. After completing the ǁlament information setup, click Conǁrm. d. The ǁlament parameters are now set. b. Set the Brand ñ Color ñ Type ñ Name of the ǁlament. * Before printing, ensure the print plate is placed ǃat and free of debris. 3.2 StaDž Printing On the Home page, tap Print File. 1 Select the model you want to print. 2 Tap Print (It is recommended to enable the Print Calibration option). 3 Wait patiently for the printing to complete. (After printing, allow the print bed to cool down completely before removing the model.) 4 4 / Technical Speciǁcations It is recommended to use actual ǁlament colors as close as possible to the ones deǁned in the print ǁle, otherwise purging results may be aƺected. a b For multi-color printing, you need to map the actual ǁlament to the ǁlament set in the print ǁle. 3.3 CFS lite Filament Mapping Instructions Represents the ǁlament set in the print ǁle. a b Represents the actual ǁlament in use. Model Body Material Rated Power Input Voltage Physical Dimensions (W◊D◊H) Net Weight PoDžs Compatible Models PLA/PLA-Silk/PLA-CF/PETG Multi-Color Printing Auto Load/Unload Automatic Reǁll CFS lite Plastic 10W DC 24V 362*227*364mm³ 3.44kg Creality 485 6pin SPARKX i7 SuppoDžed SuppoDžed SuppoDžed SuppoDžed ItemSpecification Basic Information SuppoDžed Filament Feature Conǁguration Outer Diameter of 197-202mm Thickness of 42-68mm Filament Spool Size SuppoDžed，Can Identify Creality RFID Filament RFID Filament Detection 5 1 23 CFS lite 1 / 包装清单 干燥剂铁氟龙管(备用） 4 6pin 485连接线铁氟龙管(CFS lite） * 以上清单仅供参考，请以实物为准。 2 / 安装机器 2.1 连接打印机与CFS lite 将CFS lite放在i7 的左侧，推荐CFS lite与i7之间的距离为80mm，如图所示； 1 如图所示，将两根较长的铁氟龙管插入CFS lite两侧的1、4进料口，两根较短的铁 氟龙管插入中间的2、3进料口，请确保插入到位； 2 将工具头数据线卡入料管集线器中； *注意：请勿跳过此步骤，避免使用时损坏； 3 将四根铁氟龙管另一端插入工具头五通。 4 黄色为较短的铁氟龙管 绿色为较长的铁氟龙管 灰色为工具头数据线 1 2 3 4 876 mm 468mm 80 mm 料管集线器 2.2 放置干燥剂 解锁前门划扣，向前打开CFS lite的前门； 1 撕开干燥剂包装，将干燥剂放置于箭头所指位置。 2 右滑解锁前门划扣 撕开干燥剂包装 2.3 通电 使用6pin 485连接线连接i7与CFS lite； 1 请预留足够的空间，避免热床发生碰撞； 2 ≥743mm ≥200mm ≥120mm 3 / 首次打印体验 3.1 使用CFS lite打印 将耗材放入CFS lite，插入进料口即可自动上料； 1 进入耗材页面编辑耗材信息，点击“编辑”按钮对耗材信息进行编辑； * 若使用非RFID耗材，需手动设置耗材参数： * 若使用RFID耗材，CFS lite可自动识别耗材信息，点击“查看”按钮可查看耗材的信息: 2 a. 耗材显示为问号，点击“编辑”； c. 耗材信息设置完成后，点击确定； d. 耗材参数设置完成。 b. 点击设置耗材品牌-颜色-类型-名称； 3.2 开始打印 * 打印前请确保打印板平稳放置，且打印板上没有任何杂物； 主页点击“打印文件”; 1 选择您想打印的模型; 2 点击“打印”；（*推荐勾选“打印校准” 选项） 3 耐心等待打印完成即可。(*打印结束后， 请等待打印板充分冷却再取下模型） 4 建议尽可能使用与设定耗材颜 色相近的实际耗材，否则可能 影响冲刷效果。 a b 多色打印时，需要将你的实际耗材与打印文件设置耗材进行映射。 3.3 CFS lite 耗材映射说明 表示打印机文件设置耗材； 表示实际使用耗材。 a b 4 / 技术参数 产品型号 材质 额定功率 电源输入 产品尺寸 产品净重 预留接口 适用机型 PLA/PLA-Silk/PLA-CF/PETG 多色打印 自动进退料 自动续料 耗材识别 CFS lite 塑胶 10W DC 24V 362*227*364mm³ 3.44kg 6 pin 485接口 SPARKX i7 支持 支持 支持 支持 支持，可识别Creality RFID耗材 项目参数 基础信息 耗材支持 功能配置 料盘外径197-202mm 料盘厚度42-68mm 耗材料盘尺寸

CFS lite Disclaimer and Safety Guidelines Thank you for choosing SPARKX products! Before first use, please read this manual and all accompanying materials carefully to ensure correct and safe operation of this product.Failure to follow the instructions or warnings in this manual may result in personal injury, property loss, or product damage.By using this product, you acknowledge that you fully understand and accept all terms of this statement, agree to take full responsibility for any consequences arising from use of the product, and will only use it for legal and proper purposes in compliance with SPARKX policies and guidelines. The company is not responsible for any loss caused by misuse, failure to follow instructions, or misunderstanding of the contents. Although this manual has been carefully proofread, errors or omissions may still occur. The company reserves the right to update or modify the contents, product features, or software programs without prior notice.This manual is intended only to guide users in proper product operation and does not include specific software or hardware configuration details. For configuration information, refer to your contract, packing list, or consult your sales channel. Images shown are for reference only; actual products may vary. This manual is protected by copyright law. No part of it, including its content, images, or layout, may be reproduced, translated, distributed, or modified without prior written permission from the company.SPARKX assumes no liability for any loss resulting from failure to follow the Safety Guidelines, Quick Start Guide, or other related documents, or from noncompliance with local laws and regulations. SPARKX is a trademark of Shenzhen Creality 3D Technology Co., Ltd. and its affiliates. Other product names and brands mentioned are trademarks or registered trademarks of their respective owners. For the latest product and documentation updates, please visit: wiki.creality.com Disclaimer and Warning 1.This product is for indoor use only and should be placed in a dry, well-ventilated, and low-dust environment. 2.Operate the product in an environment with a temperature between 10°C and 30°C and relative humidity below 85%. 3.Keep the product away from heat sources, direct sunlight, flammable, or explosive materials. 4.Place the CFS lite on a clean, stable, and vibration-free surface. 5.Do not use multiple plug adapters or power extension cords to avoid overload or electric leakage. 6.Do not touch the nozzle, heated bed, or internal components during operation to prevent burns or mechanical injury. 7.Never disassemble or touch internal structures while the printer is operating. 8.Avoid touching the power switch or machine with wet hands or bare feet. 9. Always ensure the device is completely powered off before installation, maintenance, or cleaning. Such operations should be performed by trained or qualified personnel in compliance with local safety regulations. 10.CFS lite should be operated only by trained or knowledgeable users. 11. Children must not use or approach the device without constant adult supervision. 12.Users must comply with local laws and safety regulations and must not use the device for any illegal purposes. Safety Guidelines Product Usage Notice For your convenience, please read the following documents carefully before using this product to ensure proper and safe operation of your SPARKX i7 3D printer, as well as to understand your legal rights and responsibilities: SPARKX CFS lite Quick Start Guide SPARKX CFS lite Disclaimer and Safety Guidelines The Creality team is always ready to provide quality service. Please contact us if you encounter any issues during use. - English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. - French: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. IC warning For pluggable equipment, the socket-outlet shall be easily accessible. Do not use this apparatus near water. Clean only with dry cloth. Only use attachment/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Internal/External Voltage Selectors : Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself. Protective earthing terminal : The apparatus should be connected to a mains socket outlet wi…

Text truncated - open the document above for the full version.

Shenzhen Creality 3D Technology Co., Ltd. Add:18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 5 18131 Tel: +86 13410218975 Email: [email protected] Date: 2025-12-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation letter To whom it may concern: Our product Filament Management System, model: CFS lite , FCC ID: 2AXH6-CFSLITE, for marketing purpose, this product only supports NFC: 13.56 MHz. The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Signature Printed Name: Lucy Li Title: Safety enginner

Shenzhen Creality 3D Technology Co., Ltd. Add:18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen, China 518131 Tel: +86 13410218975 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2025-12- 01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AXH6-CFSLITE Shenzhen Creality 3D Technology Co., Ltd. certifies that the equipment for which authorization is soughtis not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Printed Name: Lucy Li Title: Safety enginner

Shenzhen Creality 3D Technology Co., Ltd. Add:18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Tel: +86 13410218975 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2025-12-01 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AXH6-CFSLITE Shenzhen Creality 3D Technology Co., Ltd. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature Printed Name: Lucy Li Title: Safety enginner

U.S. AGENT LETTER OF ATTESTATION Date: 2025-12-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AXH6-CFSLITE Shenzhen Creality 3D Technology Co., Ltd. certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Shenzhen Creality 3D Technology Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: Shenzhen Creality 3D Technology Co., Ltd. Address: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen, China 518131 FRN: 0029955358 Tel: +86 13410218975 Email: [email protected] Signed by (printed name): Lucy Li Signature:

QA-FR-170-B Shenzhen Creality 3D Technology Co., Ltd. Add: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Tel: +86 13410218975 Email: [email protected] FCC Authorization Date: 2025-12-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Shenzhen Creality 3D Technology Co., Ltd. Hereby authorizes Bay Area Compliance Laboratories Corp. (Shenzhen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Shenzhen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Printed Name: Lucy Li Title: Safety enginner

QA-FR-171-A Shenzhen Creality 3D Technology Co., Ltd. Add: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Tel: +86 13410218975 Email: [email protected] FCC Confidential Authorization Date: 2025-12-01 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AXH6-CFSLITE In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Creality 3D Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Printed Name: Lucy Li Title: Safety enginner

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-EXP Page 1 of 4 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-EXP Page 2 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-EXP Page 3 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-EXP Page 4 of 4

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: 2501Y83350E-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-INP Page 1 of 5 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-INP Page 2 of 5 NFC Ant1 NFC Ant2 NFC Ant3 NFC Ant4 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-INP Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-INP Page 4 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-INP Page 5 of 5

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-00 TR-EM-RF045 Page 12 of 80 Version 3.0 §1.1307 (b) (3) &§2.1091 - RF EXPOSURE Applicable Standard According to FCC §2.1091 and §1.1307(b) (3), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D04 Interim General RF Exposure Guidance 1-mW Test Exemption: Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. For worst case: Mode Maximum E-Field (dBuV/m@3m) Maximum EIRP (dBm) Maximum EIRP (mW) Exemption Limit (mW) Test Exemption NFC 68.46 -26.74 0.002 1 Yes Note: EIRP = E-Field – 95.2 @3m Result: Compliant

Note:Theinformationmarked # isprovidedbytheapplicant,thelaboratoryisnotresponsibleforitsauthenticityandthisinformationcanaffectthevalidityoftheresultinthe testreport.Customermodelname,addresses,names,trademarksetc.areincluded. Thisreportcannotbereproducedexceptinfull,withoutpriorwrittenapprovaloftheCompany.Unlessotherwisestatedtheresultsshowninthistestreportreferonlytothe sample(s)tested.Thisreportisvalidonlywithavaliddigitalsignature.ThedigitalsignaturemaybeavailableonlyundertheAdobesoftwareaboveversion7.0. Thisreportmustnotbeusedbythecustomertoclaimproductcertification,approval,orendorsementbyNVLAPoranyagencyoftheU.S.Government. ThisreportmaycontaindatathatarenotcoveredbytheNVLAPaccreditationandaremarkedwithanasterisk“▼”. BayAreaComplianceLaboratoriesCorp.(Shenzhen) 5F(B-West),6F,7F,the3rdPhaseofWanLiIndustrialBuildingD,ShihuaRd,FuTianFreeTradeZone,Shenzhen,China Tel:+86-755-33320018Fax:+86-755-33320008www.baclcorp.com.cn TR-EM-RF045Page 1 of 80 Version3.0 TESTREPORT ApplicantName:ShenzhenCreality3DTechnologyCo.,Ltd. Address:18F,JinXiuHongDuBuilding,MeilongBlvd.,LonghuaDist., Shenzhen,China518131 ReportNumber:2501Y83350E-RF-00 FCCID:2AXH6-CFSLITE TestStandard(s) FCCPART15.225 SampleDescription ProductType:FilamentManagementSystem ModelNo.:CFSlite MultipleModel(s)No.:N/A TradeMark: DateReceived:2025/10/28 IssueDate:2025/12/12 TestResult:Pass ▲ ▲Intheconfigurationtested,theEUTcompliedwiththestandardsabove. PreparedandCheckedBy:ApprovedBy: BruceLinNancyWang RFEngineerRFSupervisor BayAreaComplianceLaboratoriesCorp.(Shenzhen)ReportNo.:2501Y83350E-RF-00 TR-EM-RF045Page 2 of 80 Version3.0 TABLEOFCONTENTS DOCUMENTREVISIONHISTORY..........................................................................................................................4 GENERALINFORMATION........................................................................................................................................5 PRODUCTDESCRIPTIONFOREQUIPMENTUNDERTEST(EUT)....................................................................................5 OBJECTIVE....................................................................................................................................................................5 TESTMETHODOLOGY...................................................................................................................................................5 MEASUREMENTUNCERTAINTY....................................................................................................................................6 TESTFACILITY.............................................................................................................................................................6 SYSTEMTESTCONFIGURATION..........................................................................................................................7 DESCRIPTIONOFTESTCONFIGURATION......................................................................................................................7 EUTEXERCISESOFTWARE..........................................................................................................................................7 EQUIPMENTMODIFICATIONS........................................................................................................................................7 SUPPORTEQUIPMENTLISTANDDETAILS....................................................................................................................7 EXTERNALI/OCABLE..................................................................................................................................................7 BLOCKDIAGRAMOFTESTSETUP................................................................................................................................8 SUMMARYOFTESTRESULTS................................................................................................................................9 TESTEQUIPMENTLIST..........................................................................................................................................10 FCC§15.203-ANTENNAREQUIREMENT............................................................................................................11 APPLICABLESTANDARD.............................................................................................................................................11 ANTENNACONNECTEDCONSTRUCTION....................................................................................................................11 FCC§1.1307(B)(3)&§2.1091-RFEXPOSURE........................................................................................................12 APPLICABLESTANDARD.............................................................................................................................................12 FCC§15.207-ACLINECONDUCTEDEMISSION...............................................................................................13 APPLICABLESTANDARD.............................................................................................................................................13 EUTSETUP.................................................................................................................................................................13 EMITESTRECEIVERSETUP.......................................................................................................................................13 TESTPROCEDURE.......................................................................................................................................................14 FACTOR&OVERLIMITCALCULATION.....................................................................................................................14 TESTDATA.................................................................................................................................................................14 FCC§15.225,§15.205&§15…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-TSP Page 1 of 3 EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-TSP Page 2 of 3 Radiated Emissions View (Below 30MHz) Parallel Radiated Emissions View (Below 30MHz) Perpendicular Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501Y83350E-RF-TSP Page 3 of 3 Radiated Emissions View (Below 30MHz) Ground-parallel Radiated Emissions View (Below 1 GHz)