2AXH6-HYPERFEEDHigh Volume Feed Module

Follow this guide to easily install and use HyperFeed HyperFeed HyperFeed V1.1 Quick Start Guide Enjoy! Please visit the Creality website for more machine operation and maintenance tutorials. Note： The UI interface is only for reference, and shall be subject to the actual UI. 2 Component Introduction Feed Pipe Connection Resin Bucket Connection Resin Bucket Heating Plate Resin Bucket Discharge Port Pump Window Liquid Level Sensing Zone RFID Reading Zone Resin Bucket Lid 5L Resin Bucket Resin Bucket Temperature Probe Operating Indicator Light 6-pin Connector 1 List of Accessories Resin Label Stickers ×2 Spare O-rings ×4 Hex Wrench ×1 Suction Tube Assembly ×4 6-Pin Data Cable ×1 Resin Bucket Anti-drip Sleeve ×2 Cleaning Tube Assembly ×1 Quick-release Coupling ×2 Resin Bucket Kit ×2 Piping Assembly ×1 Spare Resin Bucket Plug ×2 Pipe Securing Cable Tie ×2 Feed Nozzle Fastening Screws ×2 Pipe-End Adhesive Mount ×2 Wire Organizer and Installation Tool ×1 Quick Start Guide ×1 After-Sales Service Card ×1 Qualified Certificate ×1 Spare Feed Nozzle ×1 Feed Nozzle Bracket Screw ×2 Resin Name 2.5 mm 34 Quick Installation Guide 1. Unpack the equipment and accessories Unpack the box, take out the HyperFeed and its accessories, and check to make sure all the accessories are included. 2. Unfold the base Place the HyperFeed flat on the desk and unfold the base downward. Video Tutorial Note: Before installing the piping components, please completely cover the print screen with a piece of cardboard or foam of the appropriate size to prevent scratches or impacts to the print screen during installation. Quick Installation Guide 3. Install the piping assembly (HALOT-X1 Max ) ➁ ➃ ! ➂ ➀ ! Note: Before installation, home the printer’s light source assembly, remove the resin vat and build plate, and disconnect the power supply. 4. Connect the piping 5. Connect the 6-pin control cable Note: Do not hot-swap the 6-pin control cable! Be sure to disconnect the printer from the power source before plugging or unplugging the cable. ! Insert the HyperFeed feed tube connector and turn it clockwise.The quick-release coupling is now secured. Install the quick-release fitting onto the end of the tubing extending outside the printer, and secure it tightly with a zip tie. 56 Quick Installation Guide 3. Install the piping assembly (HALOT-X1 Max ) Quick Installation Guide Adjust the position of the cable chain as shown in the illustration, align one end of the latch with the hole, insert it, and pull down to secure it. Push the tubing through the opening inside the machine body, leaving an appropriate length. Mount the feed nozzle by aligning its holes with the printer's positioning pins and screw holes, then tighten the screws; secure the wire harness to the clip as needed. Hold the clip at the other end of the cable chain, align it with the retaining notches on the inside of the light source assembly, and secure it in place. ①② ③④ Resin Name Resin 1Resin 1 6. Install the bucket Align the interface, hold the resin bucket with both hands, and press it vertically into the HyperFeed main Write the resin name on the label, and apply it to the designated location on the resin bucket. Align the straw with the bottom groove and insert it. ② Install the resin bucket① Add the resin ② Connect the printer③ Install the resin bucket suction tube④ Apply labels Quick Installation Guide For HALOT resin, peel the bottom RFID label and stick it inside the resin bucket. First-Time Use Pour the resin along the edge; (Please do not exceed Max level. The max volume is 5L) Install the resin bucket lid and snap the latches on both sides into place. The resin can be stored for long periods. When the printer is turned on, the HyperFeed indicator lights up green; Swipe left on the printer's home screen to bring up the HyperFeed home screen; this indicates a successful connection. Note: If the HyperFeed indicator light is off, the printer’s home screen does not respond when swiped to the right, or the printer is malfunctioning, please try restarting the printer or repeating the installation steps. 78 Note: When installing the suction tube, check that the lower opening is vertical or within the stop frame. ① Apply the RFID tag Note: We recommend using 1,000 mL of alcohol. Please wear protective gloves while cleaning. Operating Mode ① Manual Control② Automatic Control Go to the slicing file page and enable the [Auto-feed] and [Bucket heating] functions. Select [HyperFeed] in [Print Control] to configure spool heating and manually feed or retract filament. 910 Clean the Piping / Replace the Resin Connect the end of the cleaning tube assembly with the fitting to the HyperFeed, and place the other end into a container filled with alcohol. Navigate to [ Print Control ] [ HyperFeed ], then tap [ One-click Cleaning ] and follow the on-screen instructions. ! Note: Before starting, unload the material, drain any remaining resin from the vat, and remove the old resin bucket. When the screen displays "Auto cleaning completed!", tap Done and remove the cleaning tube assembly. 1112 Machine Size Packaging Size N.W. G.W. Automatic Material Feeding Heating System RFID Resin Parameter Sync Remaining Volume Detection Status Indicator Light Feeding Speed Max Container Capacity Rated Voltage Rated Current Rated Power 290×195×240 mm 420×305×320 mm 2.3 kg 4.4 kg Ye s Yes (Supports heat preservation function) Ye s Ye s Ye s 60~150 ml/min 5000 ml 24V 8.3A 200W HyperFeed Technical Parameters Status Indicator Light Off Solid Green Device connected and idle.Device not connected. Check that the 6-pin data cable is properly connected and the printer is powered on. Flashing Green Solid Red Device error. Try restarting the printer. For further troubleshooting, please refer to the Creality Wiki. Device is operating normally. This product is designed for indoor use only. 13 FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could vo…

Text truncated - open the document above for the full version.

ShenzhenCreality3DTechnologyCo.,Ltd. Date:August20,2026 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestforFCCID:2AXH6-HYPERFEED ShenzhenCreality3DTechnologyCo.,Ltd.certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, (Applicantsignature) (Applicantprintedname)：LucyLi Compnayname:ShenzhenCreality3DTechnologyCo.,Ltd. ShenzhenCreality3DTechnologyCo.,Ltd. Date:August20,2026 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestforFCCID:2AXH6-HYPERFEED ShenzhenCreality3DTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)：LucyLi Compnayname:ShenzhenCreality3DTechnologyCo.,Ltd.

ShenzhenCreality3DTechnologyCo.,Ltd. 18F,JinXiuHongDuBuilding,MeilongBlvd.,LonghuaDist.Shenzhen,China FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 Date ：August20,2026 U.S.AgentDesignation {ShenzhenCreality3DTechnologyCo.,Ltd.}acknowledgestheirconsentforthefollowingcontactlocatedin theUnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:2AXH6-HYPERFEED): NameandcompanyofU.S.agent:BridgeportAdvisoryLLC PhysicalU.S.addressofagent:3330W38THPL,CHICAGO,IL60632,UnitedStates FRNofU.S.agent:0037566148 EmailaddressofU.S.agent:[email protected] ContactNO.:(708)680-6688 BridgeportAdvisoryLLCacknowledgestheirobligationtoacceptserviceofprocessonbehalfof{Shenzhen Creality3DTechnologyCo.,Ltd.}. {ShenzhenCreality3DTechnologyCo.,Ltd.}withtheFRN[0036927382]acceptsitsobligationtomaintainan agentforserviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature LucyLi Safetyenginner ShenzhenCreality3DTechnologyCo.,Ltd. Signature MrYongLiu ManagingMember BridgeportAdvisoryLLC 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 5

ShenzhenCreality3DTechnologyCo.,Ltd. Date:August20,2026 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUEST Product:HighVolumeFeedModule ModelNO.:HyperFeed FCCID:2AXH6-HYPERFEED ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe(SchematicDiagram,BlockDiagram,Operational Description)requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrom publicreview. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsidered asproprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfair advantageinthemarket. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Signature: Name:LucyLi Title:Safetyenginner Compnayname:ShenzhenCreality3DTechnologyCo.,Ltd.

ShenzhenCreality3DTechnologyCo.,Ltd. Date:August20,2026 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION FCCID:2AXH6-HYPERFEED ToWhomItMayConcern: We,theundersigned,herebyauthorizeShenzhenHuaxiaTestingTechnologyCo.,Ltd.toacton ourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthesigning ofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Signature: Name:LucyLi Title:Safetyenginner Compnayname:ShenzhenCreality3DTechnologyCo.,Ltd.

Externalphotos

Internalphotos Antenna

ShenzhenHuaxiaTestingTechnologyCo.,Ltd SHENZHENHUAXIATESTINGTECHNOLOGYCO.,LTD102A,102B,Building2,Shanghenglang NewIndustrialZone,ShanghenglangCommunity,DalangStreet,LonghuaDistrict,Shenzhen, Guangdong,People’sRepublicofChina,518000 Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V04 ReportTemplateRevisionDate:2018-07-06 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20260701415E-02 Applicant:ShenzhenCreality3DTechnologyCo.,Ltd. AddressofApplicant:18F,JinXiuHongDuBuilding,MeilongBlvd.,LonghuaDist.Shenzhen,China EquipmentUnderTest(EUT): Product:HighVolumeFeedModule ModelNo.:HyperFeed TestModelNo.:HyperFeed BrandName:N/A FCCID:2AXH6-HYPERFEED Standards:47CFRPart1.1307 47CFRPart1.1310 KDB447498D01GeneralRFExposureGuidancev06 DateofReceipt:2026-07-03 DateofTest:2026-07-03to2026-07-24 DateofIssue:2026-8-19 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (AzirWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20260701415E-02 Page:2of6 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20260701415E-02Rev.01 Initialreport 2026-8-19 ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20260701415E-02 Page:3of6 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 4RFEXPOSUREEVALUATION.......................................................................................................................................5 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................5 4.1.1Limits....................................................................................................................................................................5 4.1.2TestProcedure...................................................................................................................................................5 4.21.1.3EUTRFEXPOSUREEVALUATION.......................................................................................................................6 ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20260701415E-02 Page:4of6 3GeneralInformation 3.1ClientInformation Applicant: ShenzhenCreality3DTechnologyCo.,Ltd. AddressofApplicant: 18F,JinXiuHongDuBuilding,MeilongBlvd.,LonghuaDist.Shenzhen,China Manufacturer: ShenzhenPioCreat3dTechnologyCo.,Ltd. AddressofManufacturer: 3rdFloor,Building1,No.156HuawangRoad,LangkouCommunity,Dalang Street,LonghuaDistrict,Shenzhen,China Factory: ShenzhenPioCreat3dTechnologyCo.,Ltd. AddressofFactory: 3rdFloor,Building1,No.156HuawangRoad,LangkouCommunity,Dalang Street,LonghuaDistrict,Shenzhen,China 3.2GeneralDescriptionofEUT ProductName: HighVolumeFeedModule ModelNo.: HyperFeed TestModelNo.: HyperFeed TradeMark: N/A HardwareVersion: V2.0 SoftwareVersion: V1.5 OperationFrequency:13.56MHz ModulationType:ASK HoppingChannelType:AdaptiveFrequencyHoppingsystems ProductType:MobilePortableFixLocation AntennaType: FPCantenna AntennaGain: 0dBi PowerSupply: 24Vdc,200W ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20260701415E-02 Page:5of6 4RFExposureEvaluation 4.1RFExposureComplianceRequirement 4.1.1Limits AccordingtoFCCPart1.1310:Thecriterialistedinthefollowingtableshallbeusedtoevaluatethe environmentimpactofhumanexposuretoradiofrequency(RF)radiationasspecifiedinpart1.1307(b) F=FrequencyinMHz FriisFormula Friistransmissionformula:Pd=(Pout*G)/(4*Pi*R 2 ) Where Pd=powerdensityinmW/cm2 Pout=outputpowertoantennainmW G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. 4.1.2TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleand highestchannelindividually. ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20260701415E-02 Page:6of6 4.2 1.1.3 EUTRFExposureEvaluation 1)For13.56Mhz AntennaGain:0dBi AntennaGain:ThemaximumGainmeasuredinfullyanechoicchamberis1inlinearscale. OutputPowerIntoAntenna&RFExposureEvaluationDistance: MeasurementData Testmode:ASK Channel E-field (dBμV/m) OutputPower (dBm) E.i.r.p. calculationvalue Limit (mW) (dBm) 13.56MHz69.31-25.850.003 ＜1220.11mW Conclusion:E.i.r.p.calculationvalue＜limit,SARisexempted. Remark:1)TheEIRPOutputPowerdatarefertoreportReportNo.:CQASZ20260701415E-01. 2)EIRP=E-fieldStrengthOutputPower ***ENDOFREPORT***

S h e n z h e n L e j i n r a d i o f r e q u e n c y t e c h n o l o g y C o . , L T D L e j i n r a d i o f r e q u e n c y P r o p r i e t a r y & C o n f i d e n t i a l © 2 0 1 7 L e j i n r a d i o f r e q u e n c y C o r p o r a t i o n . A l l r i g h t s r e s e r v e d . A d d ： R m 3 0 1 B , A 4 B l d , J u n f e n g I n n o v a t i o n P a r k , F u y o n g , B a o a n D i s t , S h e n z h e n . T e l : 0 7 5 5 - 2 7 7 8 0 5 1 5 E m a i l : p h x c l e r @ s z l j r f . c o m SPECIFICATIONS FOR APPROVAL Customer Name: Shenzhen Creality 3D Technology Co.,LTD Product Name:NFC antenna Product Model: Part Number:LJNF02-25032610-R0A Write By :Limingjin Issued Date:2025-03-26 CUSTOMER ENGINEER R&D DEPTBUSSINESS DEPTAPPROVAL L E J I N R & D D E P T E N G I N E E R D E P T A P P R O V A L REVMODIFIED DESCRIPTIONDATEREMARK V1.0Initial Draft Release2024/11/24 V1.1Revise the length of cable,support new model2025/03/26 ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add：Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] Index 1.Cover ································ 1 2.Index································2 3.ProductSpecification ·························· 3 4.TestEquipment&Conditions·······················3 5.TestReport ······························ 4 6.ReliabilityTest····························5 7.Realpicture ······························ 5 8.ProductDrawing···························6 S h e n z h e n L e j i n r a d i o f r e q u e n c y t e c h n o l o g y C o . , L T D L e j i n r a d i o f r e q u e n c y P r o p r i e t a r y & C o n f i d e n t i a l © 2 0 1 7 L e j i n r a d i o f r e q u e n c y C o r p o r a t i o n . A l l r i g h t s r e s e r v e d . A d d ： R m 3 0 1 B , A 4 B l d , J u n f e n g I n n o v a t i o n P a r k , F u y o n g , B a o a n D i s t , S h e n z h e n . T e l : 0 7 5 5 - 2 7 7 8 0 5 1 5 E m a i l : p h x c l e r @ s z l j r f . c o m 3.Product Specification A. Electrical Characteristics Frequency13.56MHz VSWR ≤ 3.0 EfficiencyN/A Impedance50~90Ohm PolarizationN/A GainN/A B. Material & Mechanical Characteristics Material of RadiatorInternal FPC(M659A) Cable TypeΦ0.9mm,twisted-pair,L200mm,Black Connector Type1.25Pin*2 Dimension40.0mm*14.5mm C. Environmental Operation Temperature- 20 ̊C ~ + 50 ̊C Storage Temperature- 30 ̊C ~ + 80 ̊C Humidity40%~95% 4.Test Equipment & Conditions 1.Network AnalyzersAgilent 8753D/5071C 2.HSPA and LTE protocol test setR&S CMW500 -PT 3.Spectrum analyzerRS FPS8 FSH4 4.3D Chamber Test System 图 1 t e s t t o p o l o g y Shen zhenLejinradio frequencyte chnologyCo.,L TD Lej inra diof requ ency Prop riet ary& Conf iden tial ©201 7Lej inra diofr eque ncyC orpo rati on.A llri ghts rese rved . A dd：R m30 1B, A4B ld, Jun fen gIn nov ati onP ark ,Fu yong ,Ba oan Dis t,S hen zhe n.T el: 075 5-2 778 051 5Ema il: phx cle r@s zlj rf. com 5.TestReport 5. 1M at ch in gn et wo rk . Char t2Matc hingne twork 5.2 NFC(13.56MHz) parameter. Inductance:1.51uH; Capacitance:47pF; Quality factor:41; Impedance:1.33 Ω Performance: Class A/B/F card:0.1% Error rate. ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add：Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] 6. ReliabilityTest TestItemTestconditionEquipmentSpecificationResult 1 LowTemp. Storage Test Temperature:-30 °C， Time:48hrs Testcondition:PlacingantennainaLow/High TemperatureChamber,keepthetempis25 °C and humidityis65%foronehour,thenstep-downthe temp.to-30 °C inonehour,storeantennafor44hours; step-uptempto25°C,testantennaafter2hours. Temp.&Hu mi. Tester Nomaterial deformationis allowed. Electronic Performanceis ok. PASS 2 High Temp./High Humid Storage Test Temperature:85°CHumidity:85%RHTime:48hrs Testcondition:PlacingantennainaLow/High TemperatureChamber,keepthetempis25°Cand humidityis65%foronehour,thenstep-upthetemp.to 80°Candthehumidityupto85%inonehour,store antennafor44hours;step-downtempto25 °C ,test antennaafter2hours. Temp.&Hu mi. Tester Nomaterial deformationis allowed. Electronic Performanceis ok. PASS 3 Salt-Spray 6prayTest PlacingantennaintheSalt-SprayTester,setthetest condition，Temp:35±2°CHumidity:85%NaClsalt spray:5±1%.PHvalue:6.5~7.2Testtime:24hours Salt-Spray Tester Nocolor change Noappear rusting PASS 7.Realpicture 8.ProductDrawing LJ N F02-2 5 032 6 10-R0A C re al ity 3D 202 5 -03-2 6 Remark: 1.FPC material:Electrolytic copper.2.Backing in behind:3M300LSE. 3.Tolerance ： Cuting die:±0.1mm;Circuit on FPC:±0.05mm ； others are ±0.05mm. 4.ROHS:(Pb,Hg,Cr+6,PBBs,PBDEs),<1000ppm; Cd,<100ppm. NFC ANT UL1571#28AWG,2Pin_black, twisted-pair ,VW-1,UL certification C ： 2 0 0.0±5.0mm D ： 1.5±0.1mm GH 1.25 - 2P, whitr connector

SHENZHENHUAXIATESTINGTECHNOLOGYCO.,LTD 102A,102B,Building2,ShanghenglangNewIndustrialZone,ShanghenglangCommunity, DalangStreet,LonghuaDistrict,Shenzhen,Guangdong,People’sRepublicofChina,518000 Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V06 ReportTemplateRevisionDate:2026-01-30 TestReport *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove. Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonly tothesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.: CQASZ20260701415E-01 Applicant:ShenzhenCreality3DTechnologyCo.,Ltd. AddressofApplicant:18F,JinXiuHongDuBuilding,MeilongBlvd.,LonghuaDist.Shenzhen,China EquipmentUnderTest(EUT): Product:HighVolumeFeedModule ModelNo.:HyperFeed TestModelNo.:HyperFeed BrandName:N/A FCCID:2AXH6-HYPERFEED Standards:47CFRPart15,SubpartC DateofReceipt:2026-07-03 DateofTest:2026-07-03to2026-07-24 DateofIssue:2026-8-19 TestResult:PASS* TestedBy: (AzirWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) SHENZHENHUAXIATESTINGTECHNOLOGYCO.,LTD ReportNo.:CQASZ20260701415E-01 Page:2of39 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20260701415E-01Rev.01 Initialreport 2026-8-19 SHENZHENHUAXIATESTINGTECHNOLOGYCO.,LTD ReportNo.:CQASZ20260701415E-01 Page:3of39 2Contents Page 1VERSION..........................................................................................................................................................................2 2CONTENTS......................................................................................................................................................................3 3TESTSUMMARY............................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION................................................................................................................................................5 4.2GENERALDESCRIPTIONOFE.U.T..............................................................................................................................5 4.3TESTENVIRONMENT..................................................................................................................................................6 4.4DESCRIPTIONOFSUPPORTUNITS...............................................................................................................................6 4.5STATEMENTOFTHEMEASUREMENTUNCERTAINTY...................................................................................................7 4.6TESTLOCATION..........................................................................................................................................................8 4.7TESTFACILITY............................................................................................................................................................8 4.8EQUIPMENTLIST.........................................................................................................................................................9 5TESTRESULTANDMEASUREMENTDATA........................................................................................................10 5.1ANTENNAREQUIREMENT.........................................................................................................................................10 5.2ELECTRICFIELDSTRENGTHOFFUNDAMENTALANDOUTSIDETHEALLOCATEDBANDS........................................11 5.3RADIATEDEMISSIONS...............................................................................................................................................16 5.4FREQUENCYTOLERANCE..........................................................................................................................................20 5.5OCCUPIEDBANDWIDTH............................................................................................................................................22 6PHOTOGRAPHS-EUTTESTSETUP.....................................................................................................................28 6.1RADIATEDEMISSION................................................................................................................................................28 7PHOTOGRAPHS-EUTCONSTRUCTIONALDETAILS......................................................................................31 SHENZHENHUAXIATESTINGTECHNOLOGYCO.,LTD ReportNo.:CQASZ20260701415E-01 Page:4of39 3TestSummary TestItemTestRequirementTestMethodResult AntennaRequirement 47CFRPart15,SubpartC Section15.203 ANSIC63.102020Pass ConductedEmission (150KHzto30MHz) 47CFRPart15,SubpartC Section15.207 ANSIC63.102020 Section6.2 Pass ElectricFieldStrengthof FundamentalandOutside theAllocatedbands 47CFRPart15,SubpartC Section15.225(a)/(b)/(c) ANSIC63.102020 Section6.10 Pass RadiatedEmission 47CFRPart15,SubpartC Section15.225(d)/15.209 ANSIC63.102020 Section6.4&6.5 Pass FrequencyTolerance 47CFRPart15,SubpartC Section15.225(e) ANSIC63.102020 Section6.8 Pass OccupiedBandwidth 47CFRPart15,SubpartC Section15.215 ANSIC63.102020 Section6.9 Pass SHENZHENHUAXIATESTINGTECHNOLOGYCO.,LTD ReportNo.:CQASZ20260701415E-01 Page:5of39 4GeneralInformation 4.1ClientInformation Applicant: ShenzhenCreality3DTechnologyCo.,Ltd. AddressofApplicant: 18F,JinXiuHongDuBuilding,MeilongBlvd.,LonghuaDist.Shenzhen,Ch ina Manufacturer: ShenzhenPioCreat3dTechnologyCo.,Ltd. AddressofManufacturer: 3rdFloor,Building1,No.156HuawangRoad,LangkouCommunity, DalangStreet,LonghuaDistrict,Shenzhen,China Factory: ShenzhenPioCreat3dTechnologyCo.,Ltd. AddressofFactory: 3rdFloor,Building1,No.156HuawangRoad,LangkouCommunity, DalangStreet,Longhua…

Text truncated - open the document above for the full version.

Setupphotos 1Photographs-EUTTestSetup 1.1RadiatedEmission 9KHz~30MHz: 30MHz~1GHz: ConductedEmissionsTestSetup