2AXH6ENDER3V3NEO3D Printer

Shenzhen Creality 3D Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Creality 3D Technology Co., Ltd. Address: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Product Name: 3D Printer FCC ID: 2AXH6ENDER3V3NEO Model(s): Ender-3 V3 Neo Combo,Ender-3 V3 Neo,Ender-3 V5,Ender-3 V5 Combo 2.911(d)(5)(i) Equipment Type We, [Shenzhen Creality 3D Technology Co., Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Lucy Li Date:2026/08/21 Title and Company name: Safety enginner/ Shenzhen Creality 3D Technology Co., Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Creality 3D Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Creality 3D Technology Co., Ltd. Address: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Product Name: 3D Printer FCC ID: 2AXH6ENDER3V3NEO Model(s): Ender-3 V3 Neo Combo,Ender-3 V3 Neo,Ender-3 V5,Ender-3 V5 Combo 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Creality 3D Technology Co., Ltd. ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Lucy Li Date:2026/08/21 Title and Company name: Safety enginner/ Shenzhen Creality 3D Technology Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Creality 3D Technology Co., Ltd. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young StreetAddress: 6837 Chase Rd City/Province/Zip: Dearborn,Ml 48126 Telephone No: 313-395-3113 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Aug 21, 2026 Signed by (Printed Name/Title): Kenneth Young/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Creality 3D Technology Co., Ltd. Grantee Code:2AXH6 FCC ID: 2AXH6ENDER3V3NEO Contact Name: Lucy Li Street Address: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Telephone No: 13410218975 Email: [email protected] FRN: 0036927382 Applicant Signature: Date: 2026-08-21 Signed by (Printed Name/Title): Lucy Li / Safety enginner Aug 2026

Shenzhen Creality 3D Technology Co., Ltd. Letter of Authorization Company name: Shenzhen Creality 3D Technology Co., Ltd. Address: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Product Name: 3D Printer FCC ID: 2AXH6ENDER3V3NEO Model(s): Ender-3 V3 Neo Combo,Ender-3 V3 Neo,Ender-3 V5,Ender-3 V5 Combo We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2026/08/21 Name: Lucy Li Title: Safety enginner Company: Shenzhen Creality 3D Technology Co., Ltd.

Declaration on model difference The following models of units we produce are identical in electrical, mechanical and physical structure; The difference is only in the model name. FCCID: 2AXH6ENDER3V3NEO Production name Trade name Model no. 3D Printer N/A Ender-3 V3 Neo Combo,Ender-3 V3 Neo,Ender-3 V5,Ender-3 V5 Combo Signature: Date: 2026/08/21 Name: Lucy Li Title: Safety enginner Company: Shenzhen Creality 3D Technology Co., Ltd.

Shenzhen Creality 3D Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026/08/21 Subject; Request for Confidentiality FCC ID: 2AXH6ENDER3V3NEO To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lucy Li Title: Safety enginner

Label location

FCC ID:2AXH6ENDER3V3NEO RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) f = frequency in MHz. * = Plane-wave equivalent power density. 11.1 Friis transmission formula: Pd= (Pout*G)\ (4*pi*R 2 ) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm 2 ,If we know the maximum gain of the nd total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. RF Exposure Information: The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits.This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person's body. 11.2 Measurement Result WIFI2.4G and NFC cannot transmit at the same time WIFI2.4G Antenna gain: 2.49dBi modulation Channel Freq. (MHz) Measured power (dBm) Tune-up power (dBm) Max tune- up power (dBm) Antenna Gain Numeric Evaluation result (mW/cm2 ) Power density Limits (mW/cm2 ) WIFI2.4G 2462 15.33 14 to 16 16 1.77 0.014 1 NFC 61.69dBuV/m=61.69-95.2=-33.51dBm modulation Channel Freq. (MHz) Measured power EIRP (dBm) Evaluation result (mW/cm2 ) Power density Limits (mW/cm2 ) NFC 13.56 -33.51 0.000446 0.98

ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary& Confidential© 2017LejinradiofrequencyCorporation.Allrightsreserved. Add：Rm 301B,A4Bld,JunfengInnovationPark,Fuyong,Baoan Dist,Shenzhen.Tel:0755-27780515Email:[email protected] 1.1ProductSpecification A.ElectricalCharacteristics Frequency VSWR Efficiency Impedance Polarization Gain(2.4G) 2400MHz ~2500 MHz 5150MHz ~5850 MHz <2.0 ≥ 40% 50Ohm Linear ≤ 2.49dBi B. Material& MechanicalCharacteristics Materialof RadiatorFPC(black),LJWF42A CableTypeΦ1.13mm,L80mm,black ConnectorTypeIPX1 Dimension30.0*10.0mm C. Environmental OperationTemperature- 20 ̊C ~ + 70 ̊C StorageTemperature- 30 ̊C ~ + 85 ̊C Humidity40%~95% 1.2TestEquipment& Conditions 1.NetworkAnalyzersAgilent8753D/5071C 2.HSPAand LTE protocoltest setR&S CMW500-PT 3.CommunicationsTest SetAgilent8960 4.3D ChamberTest System ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add：Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] Chart1Testtopology 1.3TestReport 1.3.1VoltageStandingWaveRatio(VSWR). Chart2VSWR 1.3.2Efficientandgain. 1.3.3Radiationpattern. ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add：Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] Creality 3D Remark: 1.FPC material:Electrolytic copper. 2.Backing in behind:3M300LSE. 3.Tolerance ： Cuting die:±0.1mm;Circuit on FPC:±0.05mm ； others are ±0.05mm. 4.ROHS:(Pb,Hg,Cr+6,PBBs,PBDEs),<1000ppm; Cd,<100ppm. 2.4G ANT LJF02-2 4073008 -R 0 A 100±2.0 2.7 4.1 1.35 2.0 1.0 2.0 2.1 3.1 Φ1.13 同轴电缆，黑色，IPX1 2024-07-30 3 4 .0mm 10.0mm ShenzhenLejinradiofrequencytechnologyCo.,LTD LejinradiofrequencyProprietary&Confidential©2017LejinradiofrequencyCorporation.Allrightsreserved. Add：Rm301B,A4Bld,JunfengInnovationPark,Fuyong,BaoanDist,Shenzhen.Tel:0755-27780515Email:[email protected] 5. ReliabilityTest TestItemTestconditionEquipmentSpecificationResult 1 LowTemp. Storage Test Temperature:-30°C，Time:48hrs Testcondition:PlacingantennainaLow/High TemperatureChamber,keepthetempis25°Candhumidityis 65%foronehour,thenstep-downthetemp.to-30°Cinone hour,storeantennafor44hours;step-uptempto25°C,test antennaafter2hours. Temp.&Hum i. Tester Nomaterial deformationis allowed. Electronic Performanceis ok. PASS 2 High Temp./High Humid StorageTest Temperature:85°CHumidity:85%RHTime:48hrs Testcondition:PlacingantennainaLow/High TemperatureChamber,keepthetempis25°Candhumidityis 65%foronehour,thenstep-upthetemp.to80°Candthe humidityupto85%inonehour,storeantennafor44hours; step-downtempto25°C,testantennaafter2hours. Temp.&Hum i. Tester Nomaterial deformationis allowed. Electronic Performanceis ok. PASS 3 Salt-Spray6 prayTest PlacingantennaintheSalt-SprayTester,setthetest condition，Temp:35±2°CHumidity:85%NaClsaltspray:5 ±1%.PHvalue:6.5~7.2Testtime:24hours Salt-Spray Tester Nocolorchange Noappear rusting PASS

No.：BCTC/KJ-RF-ICT-001 Page 1 of 81 Edition：B.1 TEST REPORT Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC2606519336-1E Applicant: Shenzhen Creality 3D Technology Co.,Ltd. Product Name: 3D Printer Test Model: Ender-3 V3 Neo Combo Tested Date: 2026-06-18 to 2026-08-13 Issued Date: 2026-08-24 Report No.: BCTC2606519336-1E No.：BCTC/KJ-RF-ICT-001 Page 2 of 81 Edition：B.1 FCC ID:2AXH6ENDER3V3NEO The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Technology Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: 3D Printer Trademark: Model/Type Reference: Ender-3 V3 Neo Combo,Ender-3 V3 Neo,Ender-3 V5,Ender-3 V5 Combo Prepared For: Shenzhen Creality 3D Technology Co., Ltd. Address: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Manufacturer: Shenzhen Creality 3D Technology Co., Ltd. Address: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen,China 518131 Prepared By: Shenzhen BCTC Technology Co., Ltd. Address: Room 101M, Unit 1, Building1, Pengyuan, No.18, Lilang Road, Shanglilang, Nanwan Subdistrict, Longgang District, Shenzhen, Guangdong, China. Sample Received Date: 2026-06-18 Sample Tested Date: 2026-06-18 to 2026-08-13 Report No.: BCTC2606519336-1E Test Standards: 47 CFR Part 15 Subpart C (clause 15.247) ANSI C63.10-2020 Test Results: PASS Remark: This is WIFI-2.4GHz band radio test report. Prepared by : Reviewer by : Approved by: Mike Zheng Louis Zeng Sewen Guo Report No.: BCTC2606519336-1E No.：BCTC/KJ-RF-ICT-001 Page 3 of 81 Edition：B.1 Table of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information and Test Setup ...................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List .......................................................................................................... 9 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 11 5. Test Facility And Test Instrument Used ............................................................... 12 5.1 Test Facility ......................................................................................................... 12 5.2 Test Instrument Used .......................................................................................... 12 6. Conducted Emissions .......................................................................................... 15 6.1 Block Diagram Of Test Setup .............................................................................. 15 6.2 Limit .................................................................................................................... 15 6.3 Test procedure .................................................................................................... 15 6.4 EUT operating Conditions ................................................................................... 15 6.5 Test Result .......................................................................................................... 16 7. Radiated Emissions ............................................................................................. 18 7.1 Block Diagram Of Test Setup .............................................................................. 18 7.2 Limit .................................................................................................................... 19 7.3 Test procedure .................................................................................................... 20 7.4 EUT Operating Conditions .................................................................................. 21 7.5 Test Result .......................................................................................................... 21 8. Radiated Band Emission Measurement and Restricted Bands Of Operation ...... 28 8.1 Block Diagram Of Test Setup .............................................................................. 28 8.2 Limit .................................................................................................................... 28 8.3 Test procedure .................................................................................................... 29 8.4 EUT Operating Conditions .................................................................................. 29 8.5 Test Result .......................................................................................................... 30 9. Power Spectral Density Test ............................................................................... 32 9.1 Block Diagram Of Test Setup .............................................................................. 32 9.2 Limit .................................................................................................................... 32 9.3 Test procedure .................................................................................................... 32 9.4 EUT Operating Conditions .........…

Text truncated - open the document above for the full version.