2AXK9WY-030Bluetooth Keyboard

8 Long-term working hours: more than 72 hours 9 Charging time: within 5 hours 10 Battery capacity 150mA11 Charging method: external USB standard 1Bluetooth 3.0 standard interface 2 Effective operating distance: within 10 meters 3OperatingVoltage:3.3- 4.2V Detailed description of Product electrical parameters 1. keyboard device name Bluetooth Keyboard 2. match code  Ent er t he code mat chi ng mode Long press the pairing key for 2s to enter the pairing The code dwell time is 3min Exit the pairing mode Exit immediately after successful code matching If the code fails to enter deep sleep 3. Status light P ower on: the blue Power light stays on for 2-3s Pairing: blue bluetooth light flashes at 1Hz for 3min Upper and lower case light: When working normally, the blue CAPS light indicates the upper and lower case status When the battery voltage is lower than about 3.3V, the blue Power light flashes twice quickly, with an interval of 1 second, and then flashes twice quickly, indicating that the battery voltage is low and needs to be charged ； Charging prompt: During charging, the red Charge light is on, when charging is complete, the red Charge light is off； When the battery voltage is lower than the shutdown voltage by about 3V, the keyboard will automatically disconnect from the Host, and then enter deep sleep (drop mode).） 4. hibernate f irst level dormancy No action for 3s, enter the first level sleep Support button wake-up Deep sleep (drop mode) S uppor t but t on wake-up 5. sp ecial function keys Fn combines the buttons with blue silk screen, that is, the function of blue silk screen is realizedFn+Q，Fn+W，Fn+E， Switch to Android, Windows and IOS systems respectively. Ther e ar e t wo l i nes i n t he f i r st l i ne of blue silk screen of which the upper 、 1. Pul l t he power but t on of t he k eyboard to the "ON" position, the power indicator light will be on for 2-3 seconds, then off。 Press the "CONNECT" connection key of the keyboard, the Bluetooth connection indicator will flash, then the keyboard Bluetooth has been activated and can be connected to the tablet.2. Turn on and unlock the tablet, and tap the tablet Settings icon. 3.Select "Bluetooth" in the "Settings" interface, enter the Bluetooth setting interface, click the Bluetooth switch and 4.The tablet will search for activated bluetooth devices, find the wireless keyboard signal, click this item to connect. 5. Enter the PIN pairing code displayed on the screen on the keyboard and press the "Enter" key toconnect. 6. After pairing is complete, the status of the wireless keyboard will show as "Connected" Bluetooth keyboard connection operation steps This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) thi s device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance co ul d void the user's authority to operate the equipment. NOTE: This equipment has bee n tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed t o provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or r elocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

C5266091_X8_Ed.1 1/1 Letter of Authorization Shenzhen weiyucheng Technology Co.,Ltd Company: Shenzhen weiyucheng Technology Co.,Ltd Address:201, building C, building B, C, D, Dingfeng hi tech park, shapuwei community, Songgang street, Bao'an District, Shenzhen Product Name:Bluetooth Keyboard Model Number: WY-030 FCC Identifier: 2A XK9WY-030 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Shaoguo Li Date: 2022.03.02 Title: manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Shenzhen weiyucheng Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022.03.02 Subject: Request for Confidentiality FCC ID: 2AXK9WY-030 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Shaoguo Li Title: manager

ExternalPhotos

Model:WY-030 FCC ID: 2AXK9WY-030 Label Location

Internal Photos ANT

Shenzhen CTB Testing Co., Ltd. FCC ID: 2AXK9WY-030 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BT: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402-1.7020.68-1±1 0.001.00<50.309973.00YES 2.441-1.4530.72-1±10.001.00<50.312473.00YES 2.480-2.4660.57-2±1-1.000.79<50.250183.00 YES GFSK Conclusion: For the max result : 0.31247W/Kg ≤ FCC Limit 3.0 for 1g SAR.

Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB220225035RFX Report Tel: 4008-707-283Web: http://www.ctb-lab.net Page 1 of 37 TEST REPORT Compiled by: Reviewed by: Approved by: Chen Zheng Arron Liu Bin Mei / Director The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Bluetooth Keyboard FCC ID: 2AXK9WY-030 Trademark: N/A Model Number: WY-030 Prepared For: Shenzhen weiyucheng Technology Co.,Ltd Address: 2/F Building C, Dingfeng High Te c h Park, Shapuwei Community, Son ggang Street, Bao&apos;an Shenzhen, China. Manufacturer: Shenzhen weiyucheng Technology Co.,Ltd Address: 2/F Building C, Dingfeng High Te c h Park, Shapuwei Community, Son ggang Street, Bao&apos;an Shenzhen, China. Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: Floor 1&2, Building A, No. 26 of Xinhe Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong China Sample Received Date: Feb. 18, 2022 Sample tested Date: Feb. 18, 2022 to Feb. 22, 2022 Issue Date: Feb. 22, 2022 Report No.: CTB220225035RFX Te s t Standards FCC Part15.247 ANSI C63.10:2013 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB220225035RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 37 TABLE OF CONTENT Test Report Declaration Page 1. VERSION............................................................ 4 2. TEST SUMMARY ..................................................... 5 3. MEASUREMENT UNCERTAINTY ....................................... 6 4. PRODUCT INFORMATION AND TEST SETUP ........................... 7 4.1 Product Information ..................................................... 7 4.2 Test Setup Configuration ................................................ 7 4.3 Support Equipment ..................................................... 7 4.4 Channel List ........................................................... 8 4.5 Test Mode ............................................................. 8 4.6 Test Environment ....................................................... 8 5. TEST FACILITY AND TEST INSTRUMENT USED ......................... 9 5.1 Test Facility ............................................................ 9 5.2 Test Instrument Used ................................................... 9 6. AC POWER LINE CONDUCTED EMISSION .............................. 12 6.1 Block Diagram Of Test Setup............................................ 12 6.2 Limit ................................................................. 12 6.3 Test procedure ........................................................ 12 6.4 Test Result ........................................................... 14 7. RADIATED SPURIOUS EMISSION ..................................... 16 7.1 Block Diagram Of Test Setup............................................ 16 7.2 Limit ................................................................. 16 7.3 Test procedure ........................................................ 17 7.4 Test Result ........................................................... 18 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ............ 25 8.1 Block Diagram Of Test Setup............................................ 25 8.2 Limit ................................................................. 25 8.3 Test procedure ........................................................ 25 8.4 Test Result ........................................................... 26 9. COUDUCTED PEAK OUTPUT POWER ................................. 28 9.1 Block Diagram Of Test Setup............................................ 28 9.2 Limit ................................................................. 28 9.3 Test procedure ........................................................ 28 9.4 Test Result ........................................................... 29 10. 6DB OCCUPIED BANDWIDTH ........................................ 31 10.1 Block Diagram Of Test Setup .......................................... 31 10.2 Limit ................................................................ 31 10.3 Test procedure ....................................................... 31 10.4 Test Result .......................................................... 31 11. POWER SPECTRAL DENSITY ........................................ 33 11.1 Block Diagram Of Test Setup .......................................... 33 11.2 Limit ................................................................ 33 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB220225035RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 37 11.3 Test procedure ....................................................... 33 11.4 Test Result .......................................................... 33 12. ANTENNA REQUIREMENT ........................................... 33 13. EUT TEST SETUP PHOTOGRAPHS ................................... 36 (Note: N/A means not applicable) Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB220225035RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 37 1. VERSION Report N o. Issue Date Description Approved CTB220225035RFX Feb. 22, 2022 Original Valid Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB220225035RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 37 2. TEST SUMMARY The Product has been tested according to the following specifications: Test Item Test Requirement Test method Result AC Power Line Conducted Emission 47 CFR Part 15 Subpart C Section 15.207 ANSI C63.10-2013 Pass Radiated Spurious emissions 47 CFR Part 15 Subpart C Section 15.205/15.209 ANSI C63.10-2013 PAS S Band edge and RF Conducted Spurious Emissions 47 CFR Part 15 Subpart C…

Text truncated - open the document above for the full version.

RadiatedEmissions Below1G Above1G Conductedemission