2AXP2-IW22MODEL I 2 WIRELESS

多局GLORIOUS.MODEL I 2 WIRELESS Model I 2 Wireless Quick Start Guide Model I 2 WJ,elm Dongle, ► GLO-WD立MS-MB ► GLO-WDV2-MS-MG Connect! 叽yOptlons, WI『ed/Wl,eless Wl,ed Mode, As<七nd过 use A to use c cable W 归Im Mode, 2.4GH, lag-free wl,ele还 conne司,,., Bluetooth S.2 connectl,IOJ Minimum Range, 5 mete,s RF Powee, <=0.01dBm Ope,atlng F,equency, 2402MH, - 2480MH, W o,ltlng Tempe,atun,, -20-45 •c S etting Up, We , 釭ommend cha,glng you , mouse ful� befo,e using It fo, the fl卤 time In 面,elm mode. To do this, plug the use A side of the cable Into you, compute, and plug In the othee end Into the USB C port on the front end of t he mouse. The mou父 can be u父d no,mal�In wl,ed mode. If using a USB C cable othe, than the pro,lded怂<ended cable, we 飞omm end to use It only fo, cha,glng as gaming with anothe, cable may cau焚 the port on the mou迨 to be damaged b釭ause of Insufficient support . To tal cha,ge time Is appro,lmately 2 hou,s. Batter,, When using the mouse In wleeless mode, you can check the batterJ life by p,mlng and holding the OPI button f o, 3 second s. The batterJ life lndlcato, LED below the DPI button 对II ,epeated� blink In the colo, com 巧ponding to the batterJ 阳el as specified below: 四. 25,.,,ed I 26" · '°"'0,ange 1 61" ·'° 伈yellow 1 91,., 1..,., g,een When the batterJ le,el fa lls below'"· the LED lndlcato, WIii ,epeatedly blink ,ed th呾 times. This continues until the mouse Is plugged In fo, chaeglng o, It Is completely d,alned of powec Re父仁 You can ,eset the mou凭 to factOrJ 焚nlngs by holdlng down the left and ,lght mou se buttons along with the scroll <llckfo, s焚conds. Note, This action will e,a凭 all profile lnfo,matlon on the mouse and ,eset all settings to factorJ d efault. 沁ppo叩rvlce, If you hm any que红Ions o, Issues with you『 d创ce, plea父 do not hesitate to con tact us. Altema- 廿,ely, plea焚,lslt us at www.glo『lousgamlng.com whe,e you can find ou, f,equently asked que劝ons, uou bleshootlng O ps, and othe, Glorious produc巴 Copydght and lntellectu沮I Property Info『matlon, <>2022 Glo,lous LLC. All ,lghts ,eseo,ed. Glo,lous and ASCEND a,e eeglste,ed, and all associated logos, names, b,ands, products, and seo,lces a,e elthee uadema,ks o, eeglsteeed uade-ma『ks and copy叩ht of Glo,lous LLC. andlo, affiliated companies In the United States o, othe, countries. All othe八<ade­marlts and uade names a ,e the p,ope亢y of th el, 心pectlve owne心 and othe, company and product names mentioned he面n may be uadema『ks of th el, ,espe句" companies. Glorious LLC ("Glo,lous, may ha,e copy,lghc tradema, 区， trade swets, paten区， patent applications, o, othe, Intellectual prope,iy rights (whethe, ,eglste,ed o, un, eg叹e,ed) con­mnlng the product In this guide. Fumlshlng of this guide does not gh<e you a Ileen灾 to any such cop y, lght, tradema,k, patenC o, othee Inte llectual prope可 rights. The product may dlffe, from pktum whethe, on packaging o , othecwlse Glo,lous LLC assumes no ,esponslblllOJ fo『 such dlffe,enm o, ro, any e"o" that may appeac Info,matlon contained he,eln Is subject to change without notice. Wamanty.2-yea, limited Manufactum WaffanOJ. The wa四nOj does not c切" damages as a ,esult of opening the de,lce Lim扫tlon of Llablllty. Glorious shall In no 心ent be liable fo, any lost profi比， loss of lnfoomation o, data, speclal, Incidental, lndlrec < punltl,e, o, consequential o, lnddental damages arising In any way out of the dist『lbutlon of, sale of, ,e岱le of , use of, o, lnablllOJ to use the P,oduct. In no e,ent shall GLORI OU S's llablllOJ e,ceed the 『etall purthase p『Ice of the Product. WARNING, The product conta ins small parts, so plea父 keep out of ,each of child四n below the age of 10 to a,old the risk of chok ing. Keep the product away from wate, and molstuee. To a,old the ,lsk of flee, connect the product to a powe, supp叭 that compiles with PS1 ,equl,ements outllned In IEC/EN/UL 62368 and outputs Im than 15w. Risk of e,ploslon If batterJ I s ,eplaced by an Ince,, 釭t Ofpe. Dispose of used bane『les mo,dlng to the In艾巾 ctlons. Ope,atlon of this equip­ment In a ,esldentlal environment could cause ,adlo lnterte,ence. The ban, 引y ls fl,mlyln文alled, and cannot be 飞 placed If a batterJ has reached the end of Its service llfe. the entire p,oduct should be replaced Maintenance, ee ca,eful wh en cleanlng the product. Wipe dl,tysurtaces with a llghtlydamp cloth then let drJ. Do no t U凭 chemlcal <leanm o, rnn undo, wate,. Clean du文， deb,ls, and sand 什om the product with a Ilg ht b,ush o, with a comp,essed al, can Storage Condition, Temperature from -20 to 45 •c, Humidity <95% (RH) Operation Condition, Tem芦『ature from Oto 40 •c, H umidity <9四 (RH) =ocvoltage General, These terms shall be governed by and ,onstn,ed under the laws of the jurisdiction in which the Product was punchased. If any te『m herein is held to be Invalid or unenfo『ceable, then such te『m (ln 沁 far as It is Invalid or unen- f orceable) shall be given no effect and deemed to be excluded without lnvalldatlng any of the remaining tenns. Glo『lous rese,ves the right to amend any tenn at any time without notice FCC and !SEO C.nada Compliance Statements Th,s d的,e comphes w,th part 15 of the FCC Rules and lndu沁y Canada's license心empt RSS standa,d(s). Ope,ation ;, subject to the follow,ng two conditions, (1)Thls d的cemay not cause ha,mful Int七，r七l七八ce,aod (2) thls devlcemu又aaeptany lntene,ence飞celved,Including lntene,ence that may cau焚und的飞dope『atlon Le p, 仓sentappae,11 est confo,me au, CNR &fndusme Canada appllcabl区au, appae,lls ,adlo e,empts de licence. Son fonct,onnement est suJet au, deu, cond扣onssu,vantesc (1) le d,spos扣f ne do• pas p,odul,e de b,ou,llage p,e1udlrnble, ment;ndes;,able. This equipment has been tesced and found 10 comply wilh the limils for a Class B digital de,ice, pu,s,ant 10 part 15 of the FCC Rules. These limits are designed 10 pr叨de reasonable protection againS1 harmfui interference in a resideneial lastaliatlon. This equipment generates, uses and can radiate radio frequeocy energy and, If not Installed and used In ac- co志acewllh the Instructio…

Text truncated - open the document above for the full version.

Glorious LLC 13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Date: 12/5/2022 FCC ID: 2AXP2-IW22 Model Number: MODEL I 2 WIRELESS To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Glorious LLC declare that this EUT (FCC ID: 2AXP2-IW22) will conduct FCC compliance testing, the sDOC part recognized test lab(ShenzhenNTEK Testing Technology Co., Ltd.). 1/F, Building E, Fenda Science Park, SanweiCommunity,Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Please contact me if you have any question. Sincerely, Name / Title:Shazim Mohammad / General Manager Company: Glorious LLC Address:13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Phone:+1-707-5002092 Email:[email protected]

C5266091_X8_Ed.1 1/1 Letter of Authorization < Glorious LLC> Company: Glorious LLC Address:13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Product Name: MODEL I 2 WIRELESS Model Number: MODEL I 2 WIRELESS FCC Identifier: 2AXP2-IW22 We authorize LGAI Technological Center S.A., Ronda de la Font delCarme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Shazim Mohammad Date: 05/12/2022 Title: General Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 < Glorious LLC> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046Date: 05/12/2022 Subject: Request for Confidentiality FCC ID: 2AXP2-IW22 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos User’s Manual NOTE 1 Internal Photos NOTE 1 Parts List / Tune Up / BOM List RF Exposure Info Operational Description Cover Letter(s) FCC Software Security Requirements for UNII devices NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. C5266091_X10_Ed.2 1/1 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Shazim Mohammad Title: General Manager

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8

GLO-MS-IWV2-MB PATENT NO: PENDING SN: HM12244320110000 RATING FCC ID: 2AXP2-IW22 IC: 26530-IW22 R-R-cG5-MODEL-I2W WIRELESS MODEL I 2 11.86mm 10.59mm 5.59mm 80mm

Photo 9 Photo 10 Photo 11 Photo 12 ANT Photo 13 Photo 14 Photo 15

FCC ID: 2AXP2-IW22 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. SRD 2.4G: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.405-3.890.41-4±1-30.50<50.155453.00YES 2.451-5.550.28 -5±1 -40.40<50.124653.00YES 2.476-4.710.34-4±1-30.50<50.157733.00YES 2.405-3.870.41-4±1-30.50<50.155453.00YES 2.451-5.470.28 -5±1 -40.40<50.124653.00YES 2.476-4.70.34-4±1-30.50<50.157733.00YES GFSK(1M) GFSK(2M) BLE: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402-4.080.39-4±1-30.50<50.155353.00YES 2.44-4.10.39-4±1-30.50<50.156583.00YES 2.480-4.950.32-4±1-30.50<50.157853.00YES 2.402-4.150.38-4±1-30.50<50.155353.00YES 2.44-4.020.40-4±1-30.50<50.156583.00YES 2.480-4.920.32-4±1-30.50<50.157853.00YES BLE(1M) BLE(2M) Conclusion: For the max result : 0.15785 ≤ 3.0 for 1g SAR, SAR is not required. Signature: Date: 12/5/2022 NAME AND TITLE (Please print or type): Alex li /Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

热情奔放心随我动 Passion & Follow your heart www.heatmoving.com Model o 2 wireless mouse S11 test report Prepared by: Heatmoving Date: 2022/07/29 热情奔放心随我动 Passion & Follow your heart www.heatmoving.com RF 参数： Width: 25mm Length:6mm Width: 4mm 热情奔放心随我动 Passion & Follow your heart www.heatmoving.com Return loss low ： 热情奔放心随我动 Passion & Follow your heart www.heatmoving.com SWR： 热情奔放心随我动 Passion & Follow your heart www.heatmoving.com Antenna information： Passive -Freq 2450.00MHZ

Report No.: S22102800102001 Version.1.3 Page 1 of 55 RADIO TEST REPORT FCC ID:2AXP2-IW22 Product: MODEL I 2 WIRELESS Trade Mark: GLORIOUS Model No.: MODEL I 2 WIRELESS Family Model: N/A Report No.: S22102800102001 Issue Date: Nov 16. 2022 Prepared for Glorious LLC 13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S22102800102001 Version.1.3 Page 2 of 55 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 6DB BANDWIDTH ....................................................................................................................................... 25 7.4 DUTY CYCLE ............................................................................................................................................... 26 7.5 PEAK OUTPUT POWER .............................................................................................................................. 28 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 29 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS................................................................................................ 32 7.9 ANTENNA APPLICATION .......................................................................................................................... 33 8 TEST RESULTS ................................................................................................................................................... 34 1M: ............................................................................................................................................................................. 34 2M: ............................................................................................................................................................................. 45 Report No.: S22102800102001 Version.1.3 Page 3 of 55 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Glorious LLC Address ....................................... : 13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Manufacturer's Name .................. : Glorious LLC Address ....................................... : 13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Product description Product name .............................. : MODEL I 2 WIRELESS Model and/or type reference ...... : MODEL I 2 WIRELESS Family Model ............................... : N/A Test Sample Number ................... : S221028001003 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate only to the tested sample identified in this report. Date of Test : Oct 28. 2022 ~ Nov 16. 2022 Testing Engineer : (Mary Hu) Authorized Signatory…

Text truncated - open the document above for the full version.

Report No.: S22102800102002 Version.1.3 Page 1 of 55 RADIO TEST REPORT FCC ID: 2AXP2-IW22 Product: MODEL I 2 WIRELESS Trade Mark: GLORIOUS Model No.: MODEL I 2 WIRELESS Family Model: N/A Report No.: S22102800102002 Issue Date: Nov 16. 2022 Prepared for Glorious LLC 13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S22102800102002 Version.1.3 Page 2 of 55 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ............................................................................................................. 3 2 SUMMARY OF TEST RESULTS.............................................................................................................. 4 3 FACILITIES AND ACCREDITATIONS ..................................................................................................... 5 3.1 FACILITIES ....................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ........................................................................ 5 3.3 MEASUREMENT UNCERTAINTY .................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT ........................................................................................................ 6 5 DESCRIPTION OF TEST MODES ........................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ................................................................................................. 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM .............................................................. 9 6.2 SUPPORT EQUIPMENT ................................................................................................................. 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS ................................................................................... 11 7 TEST REQUIREMENTS......................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST .................................................................................................. 13 7.2 RADIATED SPURIOUS EMISSION ................................................................................................ 16 7.3 6DB BANDWIDTH ........................................................................................................................... 25 7.4 DUTY CYCLE .................................................................................................................................. 26 7.5 PEAK OUTPUT POWER ................................................................................................................. 28 7.6 POWER SPECTRAL DENSITY ...................................................................................................... 29 7.7 CONDUCTED BAND EDGE MEASUREMENT .............................................................................. 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................... 32 7.9 ANTENNA APPLICATION ............................................................................................................... 33 8 TEST RESULTS ..................................................................................................................................... 34 8.1 1M: .................................................................................................................................................. 34 8.2 2M: .................................................................................................................................................. 45 Report No.: S22102800102002 Version.1.3 Page 3 of 55 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Glorious LLC Address ....................................... : 13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Manufacturer's Name .................. : Glorious LLC Address ....................................... : 13809 Research Blvd Suite 500 PMB 93206 Austin, TX 78750, USA Product description Product name .............................. : MODEL I 2 WIRELESS Model and/or type reference ...... : MODEL I 2 WIRELESS Family Model ............................... : N/A Test Sample Number ................... : S221028001003 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate only to the tested sample identified in this report. Date of Test : Oct 28. 2022 ~ Nov 16. 2022 Testing Engineer : (Mary Hu) Authorized Signatory : (Alex Li) Report No.: S22102800102002 Version.1.3 Page 4 of 55 2 SUMMARY OF TEST RESULTS FCC Part15 (15.247), Subpart C Standard Section Test Item Verdict Remark 15.207 Conducted Emission PASS 15.247 (a)(2) 6dB Bandwidth PASS 15.247 (b) Peak Output Power PASS 15.209 (a) 15.205 (a) Radiated Spurious Em…

Text truncated - open the document above for the full version.

Radiated Measurement Photos Conducted Measurement Photos