2AXQK-T08TWS Bluetooth headset

Main product and Accessories User Manual T08 TWS Bluetooth Ear phone Chanrging Case x1 Operating Instruction x1 USBType-C Charging Cablex1 Charging Pin Charging Contact Point Microphone Touch Button Area Multi-function Button Microphone LED Status Indicator Light Operating Instruction TWS bluetooth earphone Bluetooth Earphone x1Earbuds L/M/S x1 Binaural pairing operation Turn on/Turn off Open the charging case,the white light of the headphone flashes 3 times,it will turn on automatically. Note:For the first time.you need to manually connect the earphone. The earphone that is not connected for the first time will automatically connect back to the last connected device(Apple or Android phone connection is the same) And the left and right earphones are automatically pairedWhen one earphones orange and white lights alternately flash.and the other headphone white light flashes every three secondsit means that both earphones are successfully paired. Open the bluetooth device at this time,search for “T08” and click the connection. Click the connection.After the connection is successful,the tone will be “connected”. At this point,you can start listening to the music and calling. Turn on earphone Call answering Hang up the phone Call rejection Play/PauseTouch left/right ear function one time Last songDouble-click left earphone touch area Double-click right earphone touch area Next song Voice tone Turn off earphone Take out earphone from charging case.it will be automatically on/Long press for 3 seconds to turn on Prompt voice”low battery Please charge”Battery low battery alarm Prompt item Turn on Turn off Connecting device Disconnecting device TWS left and right ears paired successfully Last song Next song Battery low battery alarm Prompt description Prompt voice”Power ON” Prompt voice”Power OFF” Prompt voice”Connected” Prompt voice”Disconnected” Prompt voice”Pairing” Prompt voice \ Prompt voice \ In the call state,short press the touch area once In the call state,short press the touch area once In the incoming call stateit will be released after 2 seconds of long touch,and the tone will “di call reject” incoming call Put back earphone to charging caseearphone will be automatically off/Long press for 3 seconds to turn off Automatically shut down without a paired device connection within 10 minutes after turning on 1.Switch to unilateral use in bilateral mode If your bluetooth earphone cannot be paired with your phone,try the following steps Please follow the safety cautions and use the product in a correct way to avoid casualties and damages.Please follow the following notes to prevent accidents like fire,overheat,chemical leakage and explosion. This product is covered under warranty for a period of one year from the date of purchase limited to normal use and maintenance of the machine parts,materials and functions.Problems and failures verified upon further identification,will be provided free repair and replacement parts. Man made damage. Headset is beyond t.he warranty period. Can’t provide proof of purchase. User does not follow the instructions,so that the headphone wire and earplug broken; Without the authorization to dismount,repair,alteration structures. Due to natural disasters and other force majeure (such as earthquakes,fires) product failure of damage causes. User’s name User’s telephone User’s Add Date of purchase Invoice Dealer’s name Dealer’s telephone Dealer’s Add To reduce the risks of fire and damage of the battery,please do not expose the product to the rain or moisture environment. To reduce the risks of fire,please do not cover the product with inflammable like carpet and quit To Prevent the product from further damages ,it is prohibited to dismantle the broken device without permit.In this case,please consult the after-sales department for the repair. Please do not use it when the device is overheating please do not apply any batteries,powers or accessories Please do not use self-made or modified batteries Do not use the wireless charging transmitter that has not passed the QI certification standard to charge the charging box. If the above steps can’t help you solve the pairing problem,please try to pair the earphone manually (In the off state,long press in the left/right ear for 5 seconds until earphone are red and blue alternately ,the earphone enter the mutual pairing state.and the headphones are waiting for the headset.Reconnect and reopen the device.) When the headset is dead or malfunctioning etc,press and hold the headset to touch the position,slowly put the headset into the charging box to charge,and the headset can be released after being placed in the charging compartment. Please store and use this product in a normal temperature environment; Do not expose this product to rain or moisture environment; Do not throw it away to avoid product damage caused by falling; Do not disassemble ,repair or modify this product; Do not wipe the product with a chemical solvent; Do not discard it at will,or put it at high temperature(temperature above 60 degrees) and fire to avoid danger. Please make sure the earphone is fully charged Please make sure the earphone is turned on Make sure the earphone is not connected to other devices Please make sure the bluetooth function of the phone is normal and the bluetooth function is turned on; Make surn the distance between the earphone and the phone is within the connectable range. Put the left ear/right ear directly into the charging case,and the earphone automatically realizes the left and right switching .It can be directly put back into the charging case without other operations 2.Shut down self-charging operations The earphone is put into the charging compartment,the earphone automatically shuts down and charges itself,the earphone is fully charged,and the earphone is automatically turned off. 3.Left and right ear can switch freely A.Putting the left ear into the charging box during the use of the ear will automatically switch the rig…

Text truncated - open the document above for the full version.

shenzhenshishuangsikejiyouxiangongsi Model Difference Product description: TWS Bluetoothheadset Model name: T08, HP1293, HeaTal Trade Name: N/A FCC ID: 2AXQK-T08 All the model are the same circuit and RF module, only for model name. Regards Sincerely Client’s signature: Client’s name / title : Jun zhang (brand development) Contact information / address: Changchunzhonglu, 33hao, 101gongmingshequ, shenzhenshiguangmin, gou(qu)gongmingjiedao, Shenzhen, China

C5266091_X8_Ed.1 Letter of Authorization shenzhenshishuangsikejiyouxiangongsi Company: shenzhenshishuangsikejiyouxiangongsi Address: Changchunzhonglu, 33hao, 101gongmingshequ, shenzhenshiguangmin, gou(qu)gongmingjiedao, Shenzhen, China Product Name: TWS Bluetoothheadset Model Number: T08 FCC Identifier: 2AXQK-T08 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jun zhang Date: Dec.16.2020 Title: brand development Signature of applicant: 1/1

C5266091_X10_Ed.2 shenzhenshishuangsikejiyouxiangongsi Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: Dec.16.2020 Subject: Request for Confidentiality FCC ID: 2AXQK-T08 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature: Name: Jun zhang Title: brand development 1/1

External Photos FCC ID: 2AXQK-T08

Model: T08 FCC ID: 2AXQK-T08 Label Location

Internal Photos FCC ID: 2AXQK-T08 ANT A B153BU

Shenzhen CTB Testing Co., Ltd. FCC ID:2AXQK-T08 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BT: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 2.7341.883±14.002.51<50.778603.00YES 2.4412.005 1.593±14.002.51<50.784903.00YES 2.4802.254 1.683±14.002.51<50.791143.00YES 2.402 2.227 1.673±14.002.51<50.778603.00YES 2.4412.921 1.963±14.002.51<50.784903.00YES 2.4802.9711.983±14.002.51<50.791143.00YES 2.402 2.3841.733±14.002.51<50.778603.00YES 2.4412.5031.783±14.002.51<50.784903.00YES 2.4801.9231.562±13.002.00<50.628433.00YES GFSK- EDR Pi/4 DQPSK- EDR 8DPSK BLE: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.4020.1371.031±12.001.58<50.491273.00YES 2.44-0.301 0.930±11.001.26<50.393303.00YES 2.480-0.313 0.930±11.001.26<50.396513.00YES GFSK- BLE Conclusion: For the max result : 0. 79114W/Kg ≤ FCC Limit 3.0 for 1g SAR.

Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB201212011RFX TEST REPORT Compiled by: Reviewed by: Approved by: Arron Liu Bin Mei Rita Xiao / Director The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: TWS Bluetoothheadset FCC ID: 2AXQK-T08 Trademark: N/A Model Number: T08 Prepared For: shenzhenshishuangsikejiyouxiangongsi Address: Changchunzhonglu, 33hao, 101gongmingshequ, shenzhenshiguangmin, gou(qu)gongmingjiedao, Shenzhen, China Manufacturer: Shenzhen Qi LAN Industrial Co. LTD Address: 2 / F, Building B, No. 63, Jixiang No.1 Road, Pingxi Community, Longgang District, Shenzhen, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: Floor 1&2, Building A, No. 26 of Xinhe Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong China Sample Received Date: Dec. 11, 2020 Sample tested Date: Dec. 12, 2020 to Dec. 16, 2020 Issue Date: Dec. 16, 2020 Report No.: CTB201212011RFX Test Standards FCC Part15.247 ANSI C63.10:2013 Test Results PASS Remark: This is Bluetooth radio test report. Report Tel: 4008-707-283Web: http://www.ctb-lab.net Page 1 of 59 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB201212011RFX TABLE OF CONTENT Test Report Declaration Page 1. VERSION ...................................................................................................... 4 2. TEST SUMMARY ........................................................................................... 5 3. MEASUREMENT UNCERTAINTY .................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ............................................... 7 4.1 Product Information ............................................................................................. 7 4.2 Test Setup Configuration ..................................................................................... 7 4.3 Support Equipment .............................................................................................. 7 4.4 Channel List ........................................................................................................ 8 4.5 Test Mode ........................................................................................................... 8 4.6 Test Environment ................................................................................................ 8 5. TEST FACILITY AND TEST INSTRUMENT USED .......................................... 9 5.1 Test Facility ......................................................................................................... 9 5.2 Test Instrument Used .......................................................................................... 9 6. AC POWER LINE CONDUCTED EMISSION ................................................... 11 6.1 Block Diagram Of Test Setup ............................................................................ 11 6.2 Limit ................................................................................................................... 11 6.3 Test procedure .................................................................................................. 11 6.4 Test Result ........................................................................................................ 13 7. RADIATED SPURIOUS EMISSION............................................................... 15 7.1 Block Diagram Of Test Setup ............................................................................ 15 7.2 Limit ................................................................................................................... 15 7.3 Test procedure .................................................................................................. 16 7.4 Test Result ........................................................................................................ 17 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ................... 26 8.1 Block Diagram Of Test Setup ............................................................................ 26 8.2 Limit ................................................................................................................... 26 8.3 Test procedure .................................................................................................. 26 8.4 Test Result ........................................................................................................ 27 9. COUDUCTED PEAK OUTPUT POWER ........................................................ 34 9.1 Block Diagram Of Test Setup ............................................................................ 34 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 59 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB201212011RFX 9.2 Limit ................................................................................................................... 34 9.3 Test procedure .................................................................................................. 34 9.4 Test Result ........................................................................................................ 35 10. 20DB OCCUPIED BANDWIDTH ................................................................... 39 10.1 Block Diagram Of Test Setup .......................................................................... 39 10.2 Limit ................................................................................................................. 39 10.3 Test procedure ................................................................................................ 39 10.4 Test Result ......................................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission Below 1G A bove 1G FCC ID: 2AXQK-T08 Conducted emissions