2AXR4-CELLTELIT31Smart ConnectDER Cell Carrier V3.1

[04 .2016 ] Mod. 0805 2016-08 Rev.5 ME910C1 HW User Guide 1VV03001351 Rev. 13 – 2020-06-30 ME910C1 HW User Guide 1VV0301351 Rev.13 Page 2 of 106 2020-06-30 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTICE While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country. COPYRIGHTS This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product. COMPUTER SOFTWARE COPYRIGHTS The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. ME910C1 HW User Guide 1VV0301351 Rev.13 Page 3 of 106 2020-06-30 USAGE AND DISCLOSURE RESTRICTIONS I. License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. II. Copyrighted Materials Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit III. High Risk Materials Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. IV. Trademarks TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners. V. Third Party Rights The software may include Third Party Right software. In this case you agree to comply with all terms and conditions imposed on you in respect of such separate software. In addition to Third Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall apply to the Third Party Right software. TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY “OTHER CODE”), AND THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE. NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND W…

Text truncated - open the document above for the full version.

Page | 1 Product Manual Smart ConnectDER™ Version 3 A Meter Collar for Rapid Grid Interconnection of Distributed Energy Resources (DERs) ConnectDER, Inc. 2001 Jefferson Davis Hwy, Suite 403 Arlington, VA 22202 571-969-1701 [email protected] Page | 2 TABLE OF CONTENTS INTRODUCTION ........................................................................................................................................................ 4 DOCUMENT VERSION ........................................................................................................................................ 4 SYMBOLS USED IN THIS MANUAL ............................................................................................................... 4 FEATURES ............................................................................................................................................................... 5 BOX CONTENTS .................................................................................................................................................... 6 TABLE 1 - ORDERING INFORMATION ........................................................................................................ 7 INTERNAL WIRING SCHEMATICS ................................................................................................................ 8 FIGURE 1 - LOAD SIDE FACTORY CONFIGURATION ....................................................................... 8 FIGURE 2 – LINE SIDE FACTORY CONFIGURATION ........................................................................ 9 FIGURE 3 – JUNCTION BOX DISPLAY DETAILS ................................................................................... 10 FIGURE 4 - METERING, COMMUNICATIONS AND CONTROLS CONCEPT ................................ 10 INSTALLATION ....................................................................................................................................................... 11 PACKAGE INSPECTION ................................................................................................................................... 11 ITEMS REQUIRED FOR INSTALLATION .................................................................................................. 12 METER REMOVAL ............................................................................................................................................. 12 REMOVE THE METER AND METER SOCKET COVER ........................................................................ 13 INSTALL THE NEUTRAL LEAD ................................................................................................................... 14 4-JAW METER SOCKET .............................................................................................................................. 14 5-JAW METER SOCKET .............................................................................................................................. 21 PLACE THE CONNECTDER IN THE METER SOCKET ......................................................................... 22 RE-INSTALL THE METER .............................................................................................................................. 24 CHECK THE CIRCUIT BREAKER AND COVER ....................................................................................... 25 INSTALL THE JUNCTION BOX AND CONNECT THE RACEWAY ................................................... 26 TERMINATE THE FIELD WIRING .............................................................................................................. 29 PREPARE THE SYSTEM FOR PROVISIONING ....................................................................................... 30 PROVISION THE SYSTEM USING “INSTALLER” CREDENTIALS ................................................... 31 PROVISION THE SYSTEM USING “ADMIN” CREDENTIALS ............................................................ 36 Page | 3 CONNECTDER CLOUD™: ADMIN USER GUIDE ......................................................................................... 37 INTRODUCTION ................................................................................................................................................. 37 USER INTERFACES ........................................................................................................................................... 37 TABLE 4 – CONNECTDER CLOUD ACCESS ........................................................................................ 37 TABLE 5 - ROLES AND PERMISSIONS MATRIX ................................................................................... 37 MANAGING USER ACCOUNTS ..................................................................................................................... 38 CREATING A USER ....................................................................................................................................... 38 APPLYING FILTERS TO SEARCH FOR USERS ................................................................................... 39 EDITING A USER ........................................................................................................................................... 40 DELETING A USER ....................................................................................................................................... 41 DOWNLOADING USER DATA .................................................................................................................. 41 MANAGING CONNECTDER UNITS ............................................................................................................. 41 APPLYING FILTERS TO UNITS ................................................................................................................ 42 VIEWING UNIT INFORMATION .............................................................................................................. 46 TABLE 6 – DESCRIPTION OF UNIT…

Text truncated - open the document above for the full version.

1 August 24, 2020 Infinite Invention, DBA ConnectDER PO Box 50667 Arlington, VA 22205 To whom it may concern: We, the undersigned, hereby authorize Advanced Compliance Lab, Wei Li to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Advanced Compliance Lab on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). In authorizing Advanced Compliance Lab as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; 2 h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Infinite Invention, Inc. DBA ConnectDER Jonathan Knauer VP of Hardware and Delivery

1 CONNECTDER CELL CARRIER V3.1 November 23 rd , 2020 Infinite Invention, Inc., DBA ConnectDER PO Box 50667 Arlington, VA 22205 To Whom it May Concern: The following application for 2AXR4-CELLTELIT31 documents the radiated emissions and unintentional radiation performance of the device with RI7ME910C1NA after integration into the host decide under FCC Parts 15 and 27. There are no modifications to the RI7ME910C1NA or its operating modes when integrated into the 2AXR4- CELLTELIT31. Per Agreement Letter dated on July 14, 2020 between Telit and ConnectDER, the testing results for the testing items shall be found in Dekra Report # 1840048R-HPUSP40V00 which was used for Telit Module ME910C1-NA ’s FCC Certification unde r FCC ID: RI7ME910C1NA since there is no modification on Telit RF module in ConnectDER Cell Carrier V3.1 design The antenna requirements in original Telit RF modular letter ( 6.18dBi for 700MHz frequency band) is also met. Sincerely, Jonathan Knauer VP Hardware and Delivery ConnectDER

Subject: Use of ME910C1-NA documentation and FCC reports Dear Sir or Madam: Telit authorizes integrator/customer ConnectDER to use the ME910C1- NA construction documentation (schematics, BOM, Block diagrams, etc.) and the FCC reports, that must remain permanently confidential, for FCC certification of their Smart ConnectDER product. FCC ID: RI7ME910C1NA ConnectDER may use MPE, part 15, 22, 24, 27 test reports along with all necessary documentation pertinent to Telit radio module ME910C1-NA and is authorized to use the company name “Telit”, product name “ME910C1-NA” solely for the certification process of Smart ConnectDER which have the Telit ME910C1-NA embedded. The Test Reports supplied by Telit to the FCC for our submission for grant are still representative of ME910C1-NA manufactured today. If you have any questions or concerns feel free to contact me. July 14, 2020 Ken Bednasz Tel +1 919-415-1517 E-Mail [email protected] www.telit.com

ConnectDER, Inc. / 2001 Jefferson Davis Highway, Suite 403 / Arlington, VA 22202 October 8 th , 2020 FCC ID: 2AXR4-CELLTELIT31 FCC and IC Confidentiality Request In accordance with 0.459 & 0.457 of CFR 47, please, accept this letter as an official request to have the schematics, block diagram, operational description of the EUT treated as confidential. The information contained within is a result of extensive investment and development effort by Infinite Invention, Inc. DBA ConnectDER and its disclosure will compromise Infinite Invention, Inc. DBA ConnectDER’s Intellectual Property and competitive edge. We thus ask the FCC and IC NOT to publish the information mentioned above, in order to protect Infinite Invention, Inc. DBA ConnectDER’s Intellectual Property. Regards, Infinite Invention, Inc. DBA ConnectDER Jonathan Knauer VP of Hardware and Delivery ConnectDER, Inc. / 2001 Jefferson Davis Highway, Suite 403 / Arlington, VA 22202

Model: CELL CARRIER V3.1 EUT: Cell Carrier V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 P age 23 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 CELL CARRIER V3.1 Hosting Device Motherboard Top View Model: CELL CARRIER V3.1 EUT: Cell Carrier V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 P age 24 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 CELL CARRIER V3.1 Hosting Device Motherboard Bottom View Model: CELL CARRIER V3.1 EUT: Cell Carrier V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 P age 25 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 CELL CARRIER V3.1 Hosting Device Smart ConnectDER ( providing the power) 1 Front View 2 Back View Model: CELL CARRIER V3.1 EUT: Cell Carrier V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 P age 26 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 3 Left side view 4 Right side View Model: CELL CARRIER V3.1 EUT: Cell Carrier V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 P age 27 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 5 Top View 6 Bottom View

Model: CELL CARRIER V3.1 EUT: Cell Carrier V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Pa ge 17 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 Section 8. FCC ID Labeling FCC ID Label (The statement may be shown in its User Manual) FCC Label Location (back of EUT) FCC ID: 2AXR4-CELLTELIT31 This device complies with Part 2, 15 & 27 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired FCC ID Label

EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 24 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 EUT: CELL CARRIER V3.1 Front EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 25 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 EUT: CELL CARRIER V3.1 Back

1 CONNECTDER CELL CARRIER PARTS LIST AND TUNE-UP PROCEDURE Parts List: SMART ConnectDER Host Device ConnectDER Modem Backer and Comms Cradle Molex 209142-0180 Antenna ConnectDER Cell Carrier Card CAT-M1 SIM Card Tune-Up Procedure: During manufacturing and assembly each module is set and tested at default levels. The manufacturing test procedure is powering on the SMART ConnectDER unit and allowing the module to connect to the Verizon LTE network and phone in to the ConnectDER Cloud. There is no field tune-up procedure. In the event of an issue the entire unit would need to be replaced.

EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 16 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 Section 9. Radio Frequency Exposure Name of Test: Radio Frequency Exposure Test Standard: FCC OET Bulletin 65 Tested By: WEI LI Test Date: 08/24-10/16/2020 Minimum Standard: Public Exposure to Radio Frequency Energy Levels (1.1307 (b)(1)) Limits: From §1.1310 Table 1 (B), for Public S = 1.0 mW/cm 2 for Professional, S = 5.0 mW/cm 2 Method of Measurement: d = 0.282 * 10 ^ ((P + G) / 20) / √ S Equation (1) S = 0.0795 * 10 ^ ((P + G)/10)/ d^2 Equation (2) where d = MPE distance in cm P = Power in dBm G = Antenna Gain in dBi S = Power Density Limit in mW/cm^2 Equation (1) and the measured peak power is used to calculate the MPE distance. Equation (2) and the measured peak power is used to calculate the Power density. Test Result: Complies Test Data: Calculation EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 17 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 CALCULATIONS Given E = √ (30 * P * G) / d and S = E ^ 2 / 3770 where E = Field Strength in Volts/meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power Density in milliwatts/square centimeter Combining equations and rearranging the terms to express the distance as a function of the remaining variables yields: d = √ ((30 * P * G) / (3770 * S)) Changing to units of Power to mW and Distance to cm, using: P(mW) = P (W) / 1000 and d (cm) =100 * d (m) yields d = 100 * √ ((30 * (P / 1000) * G) / (3770 * S)) d = 0.282 * √ (P * G / S) where d = distance in cm P = Power in mW G = Numeric antenna gain S = Power Density in mW/cm^2 Substituting the logarithmic form of power and gain using: P (mW) = 10 ^ (P (dBm) / 10) and G (numeric) = 10 ^ (G (dBi) / 10) yields d = 0.282 * 10 ^ ((P + G) / 20) / √ S Equation (1) S = 0.0795 * 10 ^ ((P + G)/10)/ d^2 Equation (2) where d = MPE distance in cm P = Power in dBm G = Antenna Gain in dBi S = Power Density Limit in mW/cm^2 Equation (1) and the measured peak power is used to calculate the MPE distance. Equation (2) and the measured peak power is used to calculate the Power density. EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 18 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 APPLICABLE LIMITS for separation >= 20cm FCC: From §1.1310 Table 1 (B), for Public S = 1.0 mW/cm 2 ; for Professional, S = 5.0 mW/cm 2 RESULTS No non-compliance noted: For FCC, the worst case for this EUT, P+G=23.30+1.2=24.50dBm, and d=20cm Plug all three items into equation (2), yielding, Power Density Limit (mV/cm 2 ) Output Power (dBm) Antenna] Gain (dBi) Power Density (mW/ cm 2) Meet min. PD Limit 1.0/5.0 23.30 1.2 0.0564 Yes Therefore, all of results are below the FCC limit. NOTE: For mobile or fixed location transmitters, the minimum separation distance between the antenna & radiating structures of the device and nearby persons is 20 cm, even if calculations indicate that the MPE distance would be less.

Electromagnetic Emission Compliance Test Report Equipment Under Test (EUT) Smart ConnectDER CELL CARRIER V3.1 Applicant Infinite Invention, Inc. DBA ConnectDER In Accordance With FCC Part 27 & Part 2 Tested by Advanced Compliance Laboratory, Inc. 210 Cougar Court Hillsborough, New Jersey 08844 Authorized by Wei Li Lab Manager Signature Date October 16, 2020 AC Lab Report Number 0048-200824-01 The test result in this report is supported and covered by the NVLAP accreditation. Lab Code:200101-0 Advanced Compliance Laboratory 210 Cougar Court Hillsborough, NJ 08844 Tel: (908) 927 9288 Fax: (908) 927 0728 EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 2 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 Table of Contents Section 1. Summary of Test Results .................................................................................. 3 Section 2. General Equipment Specification ..................................................................... 5 Section 4. Occupied Bandwidth ......................................................................................... 9 Section 5. Peak to Average Ratio .................................................................................... 10 Section 6. Frequency Stability ......................................................................................... 11 Section 7. Spurious Emissions at Antenna Terminals ..................................................... 12 Section 8. Field Strength of Spurious .............................................................................. 13 Section 7. ACL Test Equipment List ............................................................................... 16 Section 8. FCC ID Labeling............................................................................................. 17 Section 9. Setup Photos.................................................................................................... 18 Section 10. EUT Photos ................................................................................................... 20 EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 3 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 Section 1. Summary of Test Results Manufacturer: Infinite Invention, Inc. DBA ConnectDER Product Name: Smart ConnectDER Model/Parts No. : CELL CARRIER V3.1 S/N: S193709988 General: All measurements are traceable to national standards These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 2 & Part 27. New Submission Production Unit Class I Permissive Change Pre-Production Unit THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. None. See Summary of Test Data. NVLAP LAB CODE: 200101-0 Advance Compliance Laboratory, Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Advance Compliance Laboratory, Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 4 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 Summary of Test Data Testing Items FCC Rule Limit Result Maximum Output Power 2.1046 27.50(c) <3 W Complies Occupied Bandwidth (Digital)* 2.1049(i) 27.53(i)(6) N/A Complies Peak to Average Ratio* 27.50 <13dB Complies Frequency Stability* 2.1055(a)(i) <2.5ppm Complies Spurious Emission at Antenna* Terminals 27.53 <-13dBm Complies Spurious Emission 2.1051 27.53(i)(4)(6) <-13dBm Complies * Per Agreement Letter dated on July 14, 2020 between Telit and ConnectDER, the testing results for these testing items shall be found in Dekra Report # 1840048R- HPUSP40V00 which was used for Telit Module ME910C1-NA’s FCC Certification under FCC ID: RI7ME910C1NA since there is no modification on Telit RF module in ConnectDER Cell Carrier V3.1 design The antenna requirements in original Telit RF modular letter ( 6.18dBi for 700MHz frequency band) is also met. The estimated uncertainty of the test result is given as following. The method of uncertainty calculation is provided in Advanced Compliance Lab. Doc. No. 0048-01-01. Prob. Dist. Uncertainty(dB) Uncertainty(dB) Uncertainty(dB) 30-1000MHz 1-6.5GHz Conducted Combined Std. Uncertainty u c norm. ±2.36 ±2.99 ±1.83 Wei Li Date: October 16, 2020 Lab Manager Advanced Compliance Lab EUT: Cell Carrier V3.1 Model: CELL CARRIER V3.1 FCC ID: 2AXR4-CELLTELIT31 Report Number: 0048-200824-01 Page 5 Advanced Compliance Laboratory, Inc. 210 Cougar Court, Hillsborough, NJ 08844, Tel: (908) 927 9288 Section 2. General Equipment Specification Supply Voltage 5V Frequency Range 700MHz Band 13 TX/ 777MHz-787MHz RX/ 746 MHz- 756MHz Modulation LTE Cat-M1 CDMA GSM EDGE TDMA Type of Emissions G7D/ W7D F9W GXW G7W DXW Rated Power 0.226W Output Impedance /Nominal OCBW 50ohm / 1.11MHz & 966KHz Antenna Gain 1.2dBi @700MHz Band (Flexible Antenna with Cable) DC voltages and DC currents per 2.1033(c)(8) The input supply to the transmitter was set at 5 Volts DC. The RF power output was measured with the indicated voltage and current applied into the final RF amplifying device(s): CELL CARRIER V3.1 Measured max. RF output at Tx port: 23.30dBm ( 0.214W) DC voltage: 5.0V & Current : 1A Tune-up procedure per 2.1033(c) (9) There are no user accessible adjustments or tuning in this E…

Text truncated - open the document above for the full version.

Report No.: 1840048R-HPUSP40V00 Page: 1 of 60 FCC Part 27 Canada…

Text truncated - open the document above for the full version.