2AXVKAGR100Analog Gauge Reader

Electronics4All Inc. 250 Herzberg Road Kanata, ON CA K2K 2A1 613-595-0303 www.electronics4all.ca April 23, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer Subject: Covered Equipment Certification Attestation Letter Applicant: Electronics4All Inc. FCC ID: 2AXVKAGR100 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: James Walz Title: Director Hardware Company Name: Electronics4All Inc. Date: April 23, 2026

Electronics4All Inc. 250 Herzberg Road Kanata, ON CA K2K 2A1 613-595-0303 www.electronics4all.ca *The agent’s name must exactly match the primary contact person listed in the FRN registration details. ** The Agent FRN may be the same as the applicant’s if the agent and the applicant are the same U.S.-based legal entity. Dated: April 23, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada U.S. Agent Designation for Service of Process Attestation Letter FCC ID: 2AXVKAGR100 Applicant FRN: 0030093330 This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent for Service of Process for the equipment under application: U.S. Agent for Service of Process: •Company Name: FCC US Agent, LLC •Physical U.S. Company Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA •Agent Name*: Tim Payne •Agent Email Address: [email protected] •Agent FRN**: 0033402884 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: •Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. •The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant) Signed: Signed: Printed name: James Walz Printed name: Title: Director Hardware Title: Company Name: Electronics4All Inc. Company Name: Phone: +1-613-595-0303 Phone: Email: [email protected] Email: Tim Payne Manager FCC US Agent, LLC 708-571-3148 [email protected]

Electronics4All Inc. 250 Herzberg Road Kanata, ON CA K2K 2A1 613-595-0303 www.electronics4all.ca Dated: April 23, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti- Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Agency agreement expiration date: April 23, 2027 *Up to 12 months Sincerely, Signature: Name: James Walz Title: Director Hardware Company: Electronics4All Inc. Address: 250 Herzberg Road, Kanata, ON CA K2K 2A1 Phone: +1-613-595-0303 Email: [email protected]

Electronics4All Inc. 250 Herzberg Road Kanata, ON CA K2K 2A1 613-595-0303 www.electronics4all.ca Dated: April 23, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Confidentiality Request Letter – FCC FCC ID: 2AXVKAGR100 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. Long Term Confidentiality (LTC) request We request the exhibits selected below as long term confidential be withheld from public view permanently: Selection Exhibit name ☒ Block Diagrams ☒ Operation Description / Theory of Operation ☒ Parts List & Placement / BOM ☒ Schematics ☐ Tune-Up Procedure (for Licensed equipment only) Short Term Confidentiality (STC) request We also request the exhibits selected below as short term confidential be withheld from public view for a period of 180 days 1 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection 2 Exhibit name ☒ User’s Manual ☒ Internal Photos ☒ External Photos ☒ Test Setup Photos ☐ Tune-Up Procedure (for Licensed equipment only) Justification for Confidentiality The development of this product represents a significant investment and a strategic competitive differentiator for our company. Unrestricted public access to its design specifics would negate this hard-earned advantage, leading to considerable financial hardship. In the event of market introduction before the designated short-term confidentiality period expires, the grantee will notify the TCB to ensure timely release of the confidential information on the FCC equipment authorization website. The content herein contains trade secrets and proprietary information not typically released to the public. Disclosure of this information could severely impact the applicant and provide an unfair advantage to competitors. The Applicant acknowledges that, under Rule 0.457(d)(1)(ii), this Application and all associated materials will not be disclosed before the Grant date. 1 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 2 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request. Electronics4All Inc. 250 Herzberg Road Kanata, ON CA K2K 2A1 613-595-0303 www.electronics4all.ca Sincerely, Signature: Name: James Walz Title: Director Hardware Company: Electronics4All Inc. Address: 250 Herzberg Road, Kanata, Ontario, Canada K2K 2A1 Phone: +1-613-595-0303 Email: [email protected]

Label Information for AGR-100 2026-05-06 Applicant: Electronics4All Inc. FCC ID: 2AXVKAGR100 Date: May 6, 2026 IC: 26661-AGR100 Manufacturer: Zebra Series: Z-Ultimate 3000T 10011694 Color: White Dimensions: 1.75" (L) × 0.75" (W) AGR-100 Label 1 Label Information for AGR-100 2026-05-06 Applicant: Electronics4All Inc. FCC ID: 2AXVKAGR100 Date: May 6, 2026 IC: 26661-AGR100 Manufacturer: Zebra Series: Z-Ultimate 3000T 10011694 Color: White Dimensions: 1.0" (L) × 1.0" (W) AGR-100 Label 2

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The test results included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. FCC and ISED RSS-102– MPE Calculation; Date: January 2026 RF Exposure Compliance – MPE Calculation Report C h o o s e S c a n d i n a v i a n t r u s t Applicant company: Electronics4All Inc. Model number (HVIN): AGR-100 Model name (PMN): AGR-100 FCC Identification: FCC ID: 2AXVKAGR100 ISED certification number: IC: 26661-AGR100 Product type: Mobile or Fixed Device Device category Consumer Device for General Population/Uncontrolled Exposure Date of issue: May 26, 2026 Compliance Specifications: FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310 FCC 47 CFR Part 2 Subpart J, §§2.1091, 2.1093 FCC KDB 447498 D01 General RF Exposure Guidance v06 FCC KDB 865664 D01 RF Exposure Procedures and Equipment Authorization Policies ISED Canada RSS-102 Issue 6 December 15, 2023 MPE calculation report Product info: FCC ID: 2AXVKAGR100 IC: 26661-AGR100 Model: AGR-100 Page 2 of 7 Test locations of Nemko Canada Inc. Ottawa site Montréal site GTA Cambridge site Facility address 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier - FCC CA2040 CA2041 CA0101 Test site identifier – ISED Canada 2040A-4 2040G-5 24676 ANAB File Number AT-3195 AT-3193 AT-3194 Andrey Adelberg Senior EMC/Wireless Specialist Prepared by Signature Limits of responsibility The results presented in this report apply solely to the specific device model tested and are valid only for the operating conditions and installation requirements specified herein. Testing was conducted in accordance with ISO/IEC 17025:2017 requirements, and all results fall within the scope of Nemko Canada's accreditation. This MPE evaluation is based on the maximum power levels and operating conditions specified. Any modifications to the device hardware, software, or installation that could affect RF output power or antenna characteristics may invalidate this compliance demonstration. Copyright notification This report may be reproduced by the applicant in its entirety for regulatory submission and internal use. Any use of this report by third parties, including reliance on its contents or decisions made based on it, is solely at the risk of those third parties. Nemko Canada Inc. assumes no responsibility for any damages incurred by third parties as a result of actions taken based on this report. © Nemko Canada Inc. All rights reserved. MPE calculation report Product info: FCC ID: 2AXVKAGR100 IC: 26661-AGR100 Model: AGR-100 Page 3 of 7 1. Executive Summary This report presents the Maximum Permissible Exposure (MPE) analysis to demonstrate compliance with FCC and ISED RF exposure requirements. The evaluation considers both single transmitter operation and simultaneous multi-transmitter scenarios where applicable. 2. Key Findings Compliance status Complies Critical separation distances 20 cm Special conditions or limitations N/A MPE calculation report Product info: FCC ID: 2AXVKAGR100 IC: 26661-AGR100 Model: AGR-100 Page 4 of 7 MPE calculations for simultaneous transmission Device Classification Requirements Portable Device Definition (§2.1093) Devices designed for use by a person where the radiating structure is within 20 cm of the user's body require SAR evaluation rather than MPE calculation. Mobile Device Definition Devices installed in vehicles or with permanently installed antennas may use MPE calculations if minimum separation distances can be established. Fixed/Base Station Definition Stationary transmitters with controlled access to antenna locations may use MPE calculations for both occupational and general population exposure scenarios. 3. References, definitions and limits for FCC FCC §2.1091(d) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1: §1.1310(e)(1)—Power Density Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 *(100) ≤6 3.0–30 *(900 / f 2 ) <6 30–300 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 *(100) <30 1.34–30 *(180 / f 2 ) <30 30–300 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. MPE calculation report Product info: FCC ID: 2AXVKAGR100 IC: 26661-AGR100 Model: AGR-100 Page 5 of 7 4. References, definitions and limits for ISED RSS-102 Section 5.3.2 The power density reference levels, and associated reference period for devices employed by the general public (uncontrolled environment) and controlled-use devices (controlled environment) are specified in table below. Note that the power density limits specified in this table apply to whole body exposure conditions. Table 2: RSS-102— Power density limits Frequency range (MHz) Power density (W/m 2 ) Power density (mW/cm 2 ) Reference Period (minutes) Limits for controlled-use devices (controlled environment) 10–20 10 1 6 20–48 44.72 / ƒ 0.5 4.472 / ƒ 0.5 6 48–100 6.455 0.6455 6 100–600…

Text truncated - open the document above for the full version.

APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 1 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC TITLE WIFI 6E FLEX CABLE BALANCE ANTENNA TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS 4.0 ANTENNA PERFORMANCE 5.0 ASSEMBLY GUIDELINE 6.0 RF PERFORMANCE AS A FUNCTION OF IMPLEMENTATION 7.0 THE ANTENNA PERFORMANCE VARIATION WITH CABLE LENGTH 8.0 OTHER MOLEX ANTENNA PRODUCTS 9.0 CHANGE HISTORY APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 2 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC WIFI 6E FLEX CABLE BALANCE ANTENNA 1.0 SCOPE This specification describes the antenna application and surrounding. The information in this document is for reference and benchmark purposes only. The user is responsible for validating antenna rf performance based on the user’s actual implementation. Antenna illustrations in this document are generic representations. They are not intended to be an image of any antenna listed in the scope. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: WIFI 6E flex cable balance antenna Series Number: 146153 2.2 DESCRIPTION Series 146153 is a balanced, dipole-type, high efficiency antenna for 2.4/5/6 GHz applications, including WiFi 6E, Bluetooth, Zigbee and others. This antenna is made from poly flexible material with small size 35*9*0.1mm and has double-sided adhesive tape for easy “peel and stick” mounting. This balanced antenna with ground plane independent design offers various cable length options for ease of integration into various devices. 2.3 PRODUCT STRUCTURE INFORMATION Please refer to PS-1461530100 for full information. ANTENNA 3D VIEW APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 3 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 3.0 APPLICABLE DOCUMENTS DOCUMENT NUMBER DESCRIPTION Sale Drawing (SD) SD-1461530050 Mechanical Dimension of the product SD-1461531050 Product Specification (PS) PS-1461530100 Product Specification Packing Drawing (PK) PK-1461530100 Product packaging specifications 4.0 ANTENNA PERFORMANCE 4.1 RF TEST CONDITIONS All measurements are done of the antenna mounted on a PC/ABS material block of 1.5mm thickness with VNA Agilent E5071C and Over-The-Air (OTA) chamber. All measurements in this document are done with the part no.1461530100 with a cable length of 100mm. FIGURE4.1.1 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 4 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC FIGURE4.1.2 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS WITH VNA DUT APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 5 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC FIGURE4.1.3 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS WITH OTA CHAMBER DUT APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 6 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 4.2 ANTENNA PERFORMANCE All measurements in this document are done with the part no.1461530100 with a cable length of 100mm DESCRIPTION EQUIPMENT REQUIREMENT Frequency Range VNA E5071C 2.4-2.5GHz 5.15-5.85GHz 5.925- 7.125GHz Return Loss VNA E5071C <- 10dB Peak Gain (Max) OTA Chamber 3.0dBi 4.0dBi 5.5dBi Average Total Efficiency OTA Chamber >75% >75% >70% Polarization OTA Chamber Linear Input Impedance VNA E5071C 50 ohms Note that the above antenna performance is measured with just the antenna mounted on a PC/ABS block to similar a free-space condition. When implement into the system, the frequency resonant might be off-tune due to the loading of surrounding components especially metal plane. This off-tune can be compensated through matching. Although module manufacturers specify a peak gain limit, it is based on free-space conditions. The peak gain will be degraded by 1 to 2dBi in the actual implementation as the radiation pattern will change due to the surround components. As such, during selection of antenna, you can select one with high peak gain to compensate for the loss. Molex can offer assistant to choose the best location and best tuning in-order to meet this peak gain requirement. APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 7 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 4.3 RETURN LOSS PLOT All measurements in this document are done with a cable length of 100mm. FIGURE 4.3.1 RETURN LOSS OF ANTENNA AT 2.4GHZ BAND IN FREE SPACE FIGURE 4.3.2 RET…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC 15.247 and RSS-247; Date: October 21, 2025 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID: Project number: REP158267 PRJ0097572 Type of assessment: Final product testing Type of radio equipment: Bluetooth Device Equipment class: DTS Applicant: Description of product: Electronics4All Inc. Analog Gauge Reader Model(s)/HVIN(s): Product marketing name (PMN): AGR-100 AGR-100 FCC identifier: ISED certification number: FCC ID: 2AXVKAGR100 IC: 26661-AGR100 Specifications:  FCC 47 CFR Part 15 Subpart C, §15.247  RSS-247, Issue 4, July 2025, Section 6 Date of issue: May 26, 2026 Jagrut Vaishnav, EMC/RF Specialist Tested by Signature Tarek Elkholy, EMC/RF Engineer Reviewed by Signature Report reference ID: REP158267 Page 2 of 42 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road, Ottawa, ON, Canada, K1V 1H2 Tel: +1 613 737 9680 Test site registration number: CA2040 Montréal site: 292 Labrosse Avenue, Pointe-Claire, QC, Canada, H9R 5L8 Tel: +1 514 694 2684 Test site registration number: CA2041 Cambridge site: 1-130 Saltsman Drive, Cambridge, ON, Canada, N3E 0B2 Tel: +1 519 650 4811 Test site registration number: CA0101 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP158267 Page 3 of 42 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Model variant declaration ........................................................................................................................................................................................ 5 2.4 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Test conditions ................................................................................................................................................................................... 6 3.1 Atmospheric conditions ............................................................................................................................................................................................ 6 3.2 Power supply range .................................................................................................................................................................................................. 6 Information provided by the applicant ................................................................................................................................................ 7 4.1 Disclaimer ...............................................…

Text truncated - open the document above for the full version.

ABRACON IS ISO9001-2015 CERTIFIED Hidden Creek Ln Spicewood TX 786695101 Phone: 512-371-6159 | Fax: 512-351-8858 REVISED: 09-05-23 For terms and conditions of sales, please visit: www.abracon.com Tri-band Wi-Fi6E Flexible Printed Antenna (2.4/5/6 GHz) AFB4506A-0100II 45 x 6 x 0.4 mm RoHS Compliant MSL Level = N/A Request Samples Check Inventory Product Image •High gain 1.8dBi ~ 4.3dBi •Compact design with high efficiency up to 69% •Easy installation on both flat and curved surfaces •Can be installed on plastic and human body •Strong adhesive in high-temperature and humid environment •Fully customizable cable length and connectors •RoHS compliant •WiFi/WLAN coverage oWiFi 7 (802.11be) oWiFi 6/6E (802.11ax) oWiFi 4/5 (802.11b/g/n/ac) •Bluetooth® / ZigBee® / Thread/ Matter •Router and Networking •Home Automation and Remote Sensing Applications Features ABRACON IS ISO9001-2015 CERTIFIED Hidden Creek Ln Spicewood TX 78669 5101 Phone: 512-371-6159 | Fax: 512-351-8858 REVISED: 09-05-23 For terms and conditions of sales, please visit: www.abracon.com Tri-band Wi-Fi6E Flexible Printed Antenna (2.4/5/6 GHz) AFB4506A-0100II 45 x 6 x 0.4 mm RoHS Compliant MSL Level = N/A Request Samples Check Inventory Parameter Specification Unit Operating Frequency 2400 – 2500 5150 - 5850 5925 - 7125 MHz VSWR (Typ.) 2.0 Peak gain 1.8 3.6 4.3 dBi Efficiency (Maximum) 69 58.7 67.4 % Impedance 50 Ω Polarization Linear Radiation Pattern Omni-directional Parameter Specification Antenna Dimensions 45 x 6 x 0.4 mm Antenna Type Flexible Printed Circuit Mounting Type Adhesive RF Connector u.FL/IPEX-1/MHF1 RF Cable Type Ø1.13 mm Cable Length 100±3 mm Parameter Specification Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C RoHS Complaint Yes PB Free Yes Electrical Specification Mechanical Specification Environmental Specification ABRACON IS ISO9001-2015 CERTIFIED Hidden Creek Ln Spicewood TX 78669 5101 Phone: 512-371-6159 | Fax: 512-351-8858 REVISED: 09-05-23 For terms and conditions of sales, please visit: www.abracon.com Tri-band Wi-Fi6E Flexible Printed Antenna (2.4/5/6 GHz) AFB4506A-0100II 45 x 6 x 0.4 mm RoHS Compliant MSL Level = N/A Request Samples Check Inventory Ordering Information Part Number Description Connector Option AFB4506A -0100II Tri-band Wi-Fi6E Flexible Printed Antenna (2.4/5/6 GHz) with IPEX-1 connector with 100mm cable length u.FL/IPEX-1/MHF1 AFB4506A -0100IW Tri-band Wi-Fi6E Flexible Printed Antenna (2.4/5/6 GHz) with IPEX-4 connector with 100mm cable length w.FL/IPEX-4/MHF4 ABRACON IS ISO9001-2015 CERTIFIED Hidden Creek Ln Spicewood TX 78669 5101 Phone: 512-371-6159 | Fax: 512-351-8858 REVISED: 09-05-23 For terms and conditions of sales, please visit: www.abracon.com Tri-band Wi-Fi6E Flexible Printed Antenna (2.4/5/6 GHz) AFB4506A-0100II 45 x 6 x 0.4 mm RoHS Compliant MSL Level = N/A Request Samples Check Inventory Unit : inches [mm] Product Dimension 50 ension ABRACON IS ISO9001-2015 CERTIFIED Hidden Creek Ln Spicewood TX 78669 5101 Phone: 512-371-6159 | Fax: 512-351-8858 REVISED: 09-05-23 For terms and conditions of sales, please visit: www.abracon.com Tri-band Wi-Fi6E Flexible Printed Antenna (2.4/5/6 GHz) AFB4506A-0100II 45 x 6 x 0.4 mm RoHS Compliant MSL Level = N/A Request Samples Check Inventory Test Measurement – Return Loss Test Measurement – VSWR AB…

Text truncated - open the document above for the full version.