2AXVKGTW400Dual-band Outdoor Gateway

Electronics4All Inc. 250 Herzberg Road Kanata, ON CAK2K 2A1 613-595-0303 www.electronics4all.ca March 2, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer Subject: Covered Equipment Certification Attestation Letter Applicant: Electronics4All Inc. FCC ID: 2AXVKGTW400 The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: James Walz Title: Director Hardware Company Name: Electronics4All Inc. Date: March 2, 2026

Electronics4All Inc. 250 Herzberg Road Kanata, ON CAK2K 2A1 613-595-0303 www.electronics4all.ca *The agent’s name must exactly match the primary contact person listed in the FRN registration details. ** The Agent FRN may be the same as the applicant’s if the agent and the applicant are the same U.S.-based legal entity. Dated: March 2, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada U.S. Agent Designation for Service of Process Attestation Letter FCC ID: 2AXVKGTW400 Applicant FRN: 0030093330 This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent for Service of Process for the equipment under application: U.S. Agent for Service of Process: •Company Name: FCC US Agent, LLC •Physical U.S. Company Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA •Agent Name*: Tim Payne •Agent Email Address: [email protected] •Agent FRN**: 0033402884 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: •Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. •The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant) Signed: Signed: Printed name: James Walz Printed name: Title: Director Hardware Title: Company Name: Electronics4All Inc. Company Name: Phone: +1-613-595-0303 Phone: Email: [email protected] Email: Tim Payne Manager FCC US Agent, LLC 708-571-3148 [email protected]

Electronics4All Inc. 250 Herzberg Road Kanata, ON CAK2K 2A1 613-595-0303 www.electronics4all.ca Dated: March 2, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Confidentiality Request Letter – FCC FCC ID: 2AXVKGTW400 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. Long Term Confidentiality (LTC) request We request the exhibits selected below as long term confidential be withheld from public view permanently: Selection Exhibit name ☒ Block Diagrams ☒ Operation Description / Theory of Operation ☒ Parts List & Placement / BOM ☒ Schematics ☐ Tune-Up Procedure (for Licensed equipment only) Short Term Confidentiality (STC) request We also request the exhibits selected below as short term confidential be withheld from public view for a period of 180 days 1 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection 2 Exhibit name ☒ User’s Manual ☒ Internal Photos ☒ External Photos ☒ Test Setup Photos ☐ Tune-Up Procedure (for Licensed equipment only) Justification for Confidentiality The development of this product represents a significant investment and a strategic competitive differentiator for our company. Unrestricted public access to its design specifics would negate this hard-earned advantage, leading to considerable financial hardship. In the event of market introduction before the designated short-term confidentiality period expires, the grantee will notify the TCB to ensure timely release of the confidential information on the FCC equipment authorization website. The content herein contains trade secrets and proprietary information not typically released to the public. Disclosure of this information could severely impact the applicant and provide an unfair advantage to competitors. The Applicant acknowledges that, under Rule 0.457(d)(1)(ii), this Application and all associated materials will not be disclosed before the Grant date. 1 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 2 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request. Electronics4All Inc. 250 Herzberg Road Kanata, ON CAK2K 2A1 613-595-0303 www.electronics4all.ca Sincerely, Signature: Name: James Walz Title: Director Hardware Company: Electronics4All Inc. Address: 250 Herzberg Road, Kanata, Ontario, Canada K2K 2A1 Phone: +1-613-595-0303 Email: [email protected]

Label Information for GTW-400 2026-02-27 Applicant: Electronics4All Inc. FCC ID: 2AXVKGTW400 Date: February 27, 2026 IC: 26661-GTW400 Manufacturer: Zebra Series: Z-Ultimate 3000T 10011694 Colour: White Dimensions: 1.75" (L) × 0.75" (W) GTW-400 Primary Label Label Information for GTW-400 2026-02-27 Applicant: Electronics4All Inc. FCC ID: 2AXVKGTW400 Date: February 27, 2026 IC: 26661-GTW400 Manufacturer: Zebra Series: Z-Ultimate 2000T 10011977 Colour: White Dimensions: 1.0" (L) × 1.0" (W) GTW-400 Serial Number Label Label Information for GTW-400 2026-02-27 Applicant: Electronics4All Inc. FCC ID: 2AXVKGTW400 Date: February 27, 2026 IC: 26661-GTW400 Manufacturer: Brady Series: B-946 60188 Colour: Black on Yellow Dimensions: 0.5" (L) × 0.5" (W) GTW-400 Caution Label

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The test results included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. FCC and ISED RSS-102– MPE Calculation; Date: January 2026 RF Exposure Compliance – MPE Calculation Report C h o o s e S c a n d i n a v i a n t r u s t Applicant company: Electronics4All Inc Model number (HVIN): GTW-400 Model name (PMN): GTW-400 FCC Identification: FCC ID: 2AXVKGTW400 ISED certification number: IC: 26661-GTW400 Product type: Mobile or Fixed Device Device category Consumer Device for General Population/Uncontrolled Exposure Date of issue: June 15, 2026 Compliance Specifications: FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310 FCC 47 CFR Part 2 Subpart J, §§2.1091, 2.1093 FCC KDB 447498 D01 General RF Exposure Guidance v06 FCC KDB 865664 D01 RF Exposure Procedures and Equipment Authorization Policies ISED Canada RSS-102 Issue 6 December 15, 2023 MPE calculation report Product info: FCC ID: 2AXVKGTW400 IC: 26661-GTW400 Model: GTW-400 Page 2 of 7 Test locations of Nemko Canada Inc. Ottawa site Montréal site GTA Cambridge site Facility address 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier - FCC CA2040 CA2041 CA0101 Test site identifier – ISED Canada 2040A-4 2040G-5 24676 ANAB File Number AT-3195 AT-3193 AT-3194 Andrey Adelberg Senior EMC/Wireless Specialist Prepared by Signature Limits of responsibility The results presented in this report apply solely to the specific device model tested and are valid only for the operating conditions and installation requirements specified herein. Testing was conducted in accordance with ISO/IEC 17025:2017 requirements, and all results fall within the scope of Nemko Canada's accreditation. This MPE evaluation is based on the maximum power levels and operating conditions specified. Any modifications to the device hardware, software, or installation that could affect RF output power or antenna characteristics may invalidate this compliance demonstration. Copyright notification This report may be reproduced by the applicant in its entirety for regulatory submission and internal use. Any use of this report by third parties, including reliance on its contents or decisions made based on it, is solely at the risk of those third parties. Nemko Canada Inc. assumes no responsibility for any damages incurred by third parties as a result of actions taken based on this report. © Nemko Canada Inc. All rights reserved. MPE calculation report Product info: FCC ID: 2AXVKGTW400 IC: 26661-GTW400 Model: GTW-400 Page 3 of 7 1. Executive Summary This report presents the Maximum Permissible Exposure (MPE) analysis to demonstrate compliance with FCC and ISED RF exposure requirements. The evaluation considers both single transmitter operation and simultaneous multi-transmitter scenarios where applicable. 2. Key Findings Compliance status Complies Critical separation distances 20 cm Special conditions or limitations N/A MPE calculation report Product info: FCC ID: 2AXVKGTW400 IC: 26661-GTW400 Model: GTW-400 Page 4 of 7 MPE calculations for simultaneous transmission Device Classification Requirements Portable Device Definition (§2.1093) Devices designed for use by a person where the radiating structure is within 20 cm of the user's body require SAR evaluation rather than MPE calculation. Mobile Device Definition Devices installed in vehicles or with permanently installed antennas may use MPE calculations if minimum separation distances can be established. Fixed/Base Station Definition Stationary transmitters with controlled access to antenna locations may use MPE calculations for both occupational and general population exposure scenarios. 3. References, definitions and limits for FCC FCC §2.1091(d) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1: §1.1310(e)(1)—Power Density Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 *(100) ≤6 3.0–30 *(900 / f 2 ) <6 30–300 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 *(100) <30 1.34–30 *(180 / f 2 ) <30 30–300 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. MPE calculation report Product info: FCC ID: 2AXVKGTW400 IC: 26661-GTW400 Model: GTW-400 Page 5 of 7 4. References, definitions and limits for ISED RSS-102 Section 5.3.2 The power density reference levels, and associated reference period for devices employed by the general public (uncontrolled environment) and controlled-use devices (controlled environment) are specified in table below. Note that the power density limits specified in this table apply to whole body exposure conditions. Table 2: RSS-102— Power density limits Frequency range (MHz) Power density (W/m 2 ) Power density (mW/cm 2 ) Reference Period (minutes) Limits for controlled-use devices (controlled environment) 10–20 10 1 6 20–48 44.72 / ƒ 0.5 4.472 / ƒ 0.5 6 48–100 6.455 0.6455 6 100–600…

Text truncated - open the document above for the full version.

Wireless Products Accessories Ordering Guide Release 1.6 December 30, 2016 www.multitech.com W i r e l e s s P r o d u c t s A c c e s s o r i e s O r d e r i n g G u i de 2/32 Revision History Release Date Change details 1.6 12/30/2016 dded: CA-USB-A-MICRO-B-3 USB cable CA-MTAC-GPIO cable ANLTE1-xx, ANLTE2-xx and ANLTE3-xx LTE antennas ANOB-xEMB Octo-band embedded patch antennas AN868-915-xHRA LoRa antennas Removed: PS-5VCB-LBC-U-xx power supply (discontinued) PC-932-DC power cable (NEOL) CA15-9-D and CA15-9-ADP serial cables (discontinued) CASMA-MMCX-x antenna cables (discontinued) IEC-320 style AC adaptors 1.5 11/5/2014 Updated MTC-C2 antenna options Added MTR-EV3, MTC-EV3 and MTCDP-EV3 models Removed serial cable CA15-9-DV (discontinued) 1.4 4/23/2014 Added replacement power blades for power supplies 1.3 3/4/2014 Added MTPCIE, MTR-H5, MTC-H5 and MTCMR-EV3 products Updated several antenna options 1.2 9/16/2013 Added new USB cable for MultiConnect ® Cell 100 series products (MTC-xx) Added MTR-C2, MTC-C2 and MTCMR-C2 products (New products) 1.1 8/22/2013 Added DIN Rail Mounting Accessory Kits 1.0 7/10/2013 Initial release Table of Contents Power Supplies for Cellular Products ................................................................. 4 AC Adaptor Power Supplies ..............................................................................5 Replacement Power Blades for AC adaptors ...............................................7 DC Power Cable ..................................................................................................7 Power Supplies for Cellular Development Kits ...............................................8 Antennas for Cellular Products .......................................................................... 9 Cellular Antennas ............................................................................................. 10 GPS Antennas .................................................................................................... 19 Combined Cellular and GPS Antennas ....................................................... 20 Wi-Fi/Bluetooth Antennas ................................................................................ 20 LoRa Antennas.............................................................................. 22 Interface Cables ................................................................................................ 22 Serial Cables ...................................................................................................... 22 USB Cables ......................................................................................................... 22 USB Cables for QuickCarrier ® USB-E .............................................................. 23 Ethernet Cables ................................................................................................ 24 GPIO Cables ...................................................................................................... 24 MultiConnect ® OCG Break out Board ............................................................. 25 RF Cables for Embedded Cellular Products ................................................... 26 Reverse SMA-to-MMCX ................................................................................... 26 SMA-to-UFL ......................................................................................................... 28 Reverse SMA-to-UFL .......................................................................................... 28 Mounting Brackets ............................................................................................ 29 MultiConnect ® rCell 100 Series Cellular Routers .......................................... 29 MultiConnect ® Cell and MultiConnect® eCell ................................. 30 DIN Rail Mounting Kits ....................................................................................... 30 MultiModem ® Cell, iCell, rCell and MultiConnect ® OCG, Conduit ........ 30 MultiModem ® Cell, iCell, rCell and MultiConnect ® OCG, Conduit ........ 31 MultiConnect ® rCell, Cell and eCell ............................................................. 32 W i r e l e s s P r o d u c t s A c c e s s o r i e s O r d e r i n g G u i de 3/32 Introduction The purpose of this document is to provide the reader guidance when ordering accessories for MultiTech wireless products. This document will not provide any guidance on the selection of the wireless/cellular product to order. Please contact your sales representative for guidance in selecting the appropriate product for your application. When ordering wireless/cellular products, you will have the option to order an un-bundled product (no power supply, antennas, interface cables etc...) or a bundled version that includes the product, power supply, antennas and interface cables in the packaging. If you order a bundled product, you likely will not need to order any of the accessories contained in this ordering guide unless you need a replacement item. If you order an un-bundled version of the product, utilize this ordering guide to assist you in selecting the various accessories you will need to operate the device. Throughout this document, you will see a reference to certain models of products. For example, an “H5” or “MTR” model. If your device has an “H5” or “MTR” as part of its ordering part number, then the comment is applicable to your device. Printed and downloaded versions of this document are uncontrolled. This document is updated periodically and new revisions are subsequently posted to MultiTech’s website. The URL for the current revision of this document is listed below: http://www.multitech.com/documents/publications/marketing-guides/cellular-products-accessories- ordering-guide.pdf Note: The descriptions used in this document are descriptive in nature and might not match the descriptions located on the price list, web site or order documentation. Please reference those d…

Text truncated - open the document above for the full version.

SPE-11-8-144-E Part No: AP.17E.07.0064A Description 17mm One Stage GPS/Galileo Active Patch Antenna Module with Front End SAW Filter Features: 17mm x 17mm x 6.3mm 64mm 1.13 I-PEX MHF® I Wide Voltage 1.8V~5.5V 15dB LNA Tested in Free space CE Certified RoHS and REACH Compliant 2 www.taoglas.com SPE-11-8-144-E 1. Introduction 3 2. Specification 4 3. Passive Antenna Characteristics 7 4. Radiation Patterns 10 5. LNA Characteristics 12 6. Mechanical Drawing 14 7. Packaging 15 Changelog 16 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. 3 www.taoglas.com SPE-11-8-144-E 1. Introduction The AP.17E is a one stage 17mm active patch antenna that has been designed specifically for embedded (inside device) integration with GPS/Galileo receiver modules. The AP.17E combines a 17*17*4mm advanced low profile ceramic patch antenna with a one stage LNA and a front-end SAW filter with ultra thin coaxial cable. It comes with it’s own integrated ground-plane. The front end SAW filter reduces the risks where there is a cellular transmitter nearby of interference from out of band frequencies which can cause LNA burn-out, saturation, or radiated spurious emissions. Typical Applications Include: - Navigation Systems - Asset Tracking - Performance Trackers/Wearables The antenna can work on a wide input voltage from 1.8V to 5.5V with best in class power consumption figures. If further tuning and optimization specific to a customer device is required Taoglas offers a custom tuned and optimized part service. Cables and connectors can be customized according to request. For further information please contact your regional Taoglas customer support team. 4 www.taoglas.com SPE-11-8-144-E 2. Specification GNSS Frequency Bands GPS L1 1575.42 MHz L2 1227.6 MHz L5 1176.45 MHz ◼   GLONASS G1 1602 MHz G2 1248 MHz G3 1207 MHz    Galileo E1 1575.24 MHz E5a 1176.45 MHz E5b 1201.5 MHz E6 1278.75 MHz ◼    BeiDou B1C 1575.42 MHz B1I 1561 MHz B2a 1176.45 MHz B2b 1207.14 MHz B3 1268.52 MHz ◼     L-Band L-Band 1542 MHz  QZSS (Regional) L1 1575.42 MHz L2C 1227.6 MHz L5 1176.45 MHz L6 1278.75e6 ◼    IRNSS (Regional) L5 1176.45 MHz  SBAS L1/E1/B1 1575.42 MHz L5/B2a/E5a 1176.45 MHz G1 1602 MHz G2 1248 MHz G3 1207 MHz ◼     GNSS Bands and Constellations 5 www.taoglas.com SPE-11-8-144-E GNSS Electrical Frequency (MHz) 1575.42 Passive Antenna Efficiency (%) (Without cable loss) 33.39 Polarization RHCP Impedance 50 Ω Cable Ø1.13 RF Coaxial Cable L=64mm2.5mm Connector I-PEX MHF® I LNA and Filter Electrical Properties Frequency (MHz) 1575.42 VSWR (max.) <2.0 [email protected] (dBic) 12.8 [email protected] (dBic) 15.3 [email protected] (dBic) 16.7 [email protected] (dBic) 2.2 [email protected] (dBic) 2.1 [email protected] (dBic) 2.3 Current [email protected] (mA) 1.6 Current [email protected] (mA) 3.5 Current [email protected] (mA) 7.6 P1dB Compression Point (dBm) -15.0 6 www.taoglas.com SPE-11-8-144-E Mechanical Dimensions 17mm*17mm*6.3mm RF Cable Ø1.13 RF Coaxial Cable L=64mm2.5mm RF Connector I-PEX MHF® I Environmental Operation Temperature -40°C to + 85°C Storage Temperature -40°C to + 85°C Relative Humidity 40% to 95% 7 www.taoglas.com SPE-11-8-144-E 3. Passive Antenna Characteristics 3.1 Return Loss 3.2 VSWR 8 www.taoglas.com SPE-11-8-144-E 3.3 Efficiency 3.4 Average Gain 9 www.taoglas.com SPE-11-8-144-E 3.5 Peak Gain 10 www.taoglas.com SPE-11-8-144-E 4. Radiation Patterns 4.1 Test Setup X Y Z 11 www.taoglas.com SPE-11-8-144-E 4.2 Patterns at 1575 MHz XZ Plane YZ Plane XY Plane 12 www.taoglas.com SPE-11-8-144-E 5. LNA Characteristics 5.1 Out Of Band Attenuation 5.2 LNA Gain and Noise Figure @3.0V 13 www.taoglas.com SPE-11-8-144-E 5.3 Group Delay 14 www.taoglas.com SPE-11-8-144-E 6. Mechanical Drawing 15 www.taoglas.com SPE-11-8-144-E 7. Packaging 16 www.taoglas.com SPE-11-8-144-E Changelog for the datasheet SPE-11-8-144 – AP.17E.07.0064A Revision: E (Current Version) Date: 2023-12-01 Changes: Retest and updated datasheet Changes Made by: Gary West Previous Revisions Revision: D Date: 2021-11-29 Changes: Update datasheet template & data. Changes Made by: Gary West Revision: C Date: 2017-06-19 Changes: Amended Packaging Changes Made by: Peter Monahan Revision: B Date: 2011-01-16 Changes: Changes Made by: Technical Writer Revision: A (Original First Release) Date: 2011-11-30 Notes: Author: Technical Writer 17 www.taoglas.com SPE-11-8-144-E

Description: 2.4-2.5GHz Dipole swivel stick antenna PART NUMBER: W1030 Series: Stick Antenna Issue: 2047 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide HeadquartersPulse/Larsen AntennasEurope HeadquartersPulse (Suzhou) Wireless Products Co, Inc. 15255 Innovation Drive #100Pulse GmbH & Do, KG99 HuoJuRoad(#29 Bldg,4 th Phase San Diego, CA 92128Vancouver, WA 98683Zeppelinstrasse15Suzhou New District USAUSAHerrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 18110 SE 34 th St Bldg2 Suite 250 Features: Applications: All dimensions are in mm / inches •Frequency 2400-2500MHz •Gain 2.0 dBi •Return Loss -10dB •Length 108mm Straight position •Connector: •RP SMA Male as default •SMA Male available by request •2.4GHz ISM band radios •Bluetooth, BLE, Zigbee •WLAN, WiFi802.11x for 2.4GHz •Indoor use 1 Issue: 2047 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.5GHz Dipole swivel stick antenna Series: Stick Antenna PART NUMBER: W1030 2 Antenna Type 1/2 λSwivel Type Dipole Antenna Frequency 2.4-2.5 GHz NominalImpedance50 Return Loss≤ -10dB Radiation Pattern Omni Gain 2.0 dBi Polarization Vertical Electrical Length 1/2λdipole Overall Length 108 mm Weight 6.3 g Antenna Color Black Connector type Reverse SMA (Male), default SMA (Male), by request Operating Temperature -40~+85°C Storage Temperature -40~+85°C RoHS Compliant Yes MECHANICALSPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Issue: 2047 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.5GHz Dipole swivel stick antenna Series: Stick Antenna PART NUMBER: W1030 3 MECHANICALDRAWING [ ] [ ] [ ] Issue: 2047 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.5GHz Dipole swivel stick antenna Series: Stick Antenna PART NUMBER: W1030 4 Return Loss Issue: 2047 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.5GHz Dipole swivel stick antenna Series: Stick Antenna PART NUMBER: W1030 5 Gain and efficiency Issue: 2047 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.5GHz Dipole swivel stick antenna Series: Stick Antenna PART NUMBER: W1030 CHARTS 6 Radiation pattern Issue: 2047 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 2.4-2.5GHz Dipole swivel stic…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC 15.247 and RSS-247; Date: Oct…

Text truncated - open the document above for the full version.