2AY26-FSKIT1Golf Launch Monitor

QUICK START GUIDE UNLOCK YOUR GAME Version 1.2 www.fullswinggolf.com QUICK START GUIDE Download and install the the Full Swing app by clicking the following link from your iPhone: http://appstore.com/fullswing •Create a Full Swing account •Pair your KIT •Connect KIT to your Wi-Fi network (required for firmware updates) PAIR IT •Apple iPhone 8 or higher, running iOS 14 (iPad coming soon) •Apple Watch 3 or higher, running watchOS 7 •Apple AirPods or any Bluetooth headphones COMPATIBILITY UPDATE IT While charging, you may see your KIT download and install a firmware update. This is good. We are constantly delivering the best experience while you relax. Remove the charger and cable from the inside pocket of the carry case. Lift the rubber tab on the left side of your KIT and attach the charging cable. Allow about 5 hours for a full charge. Don’t worry, you can pair and configure your KIT while charging. POWER IT UP The moment you’ve been waiting for. When you get to the range, push and hold the power button for 2 seconds. When you see the data tiles you’re ready to connect the app and set it up (see next section). For detailed safety information and the full user guide, please visit https://install.fullswinggolf.com/kit-user-guides/ SAFETY AND USER GUIDES CHARGE IT Version 1.2 www.fullswinggolf.com QUICK START GUIDE PLACE YOUR KIT DIRECTLY BEHIND THE BALLMAKE SURE YOUR KIT IS ON A LEVEL SURFACE SET IT UP Place your KIT directly behind the ball and make sure it’s on a level surface approximately 10 feet directly behind your tee area. Now you’re ready to to set a target: • Open the Full Swing app and Start a Practice Session • Connect to your KIT and set your environment and location • Select a Club & Set a Target - Aim your KIT so that the white line is pointed at your target and your ball is inside or near the blue drop zone. Version 1.2 www.fullswinggolf.com QUICK START GUIDE APPLE WATCH If you have an Apple Watch, open the FS icon after you start a session. This will allow you view data, change clubs, star, and delete shots right from your watch. You can customize the data in Session Settings. TEE IT UP Once you’ve selected a club and set a target you’re ready to hit! Here’s a quick overview of the app to get your bearings: Version 1.2 www.fullswinggolf.com QUICK START GUIDE NEED HELP? You can get help right from our app. Simply shake your phone to report a bug, provide feedback, or ask a question.

Full Swing Launch Monitor Safety Manual Full Swing Launch Monitor Safety Manual Version 2021.05.20a Full Swing Launch Monitor Safety Manual Responsible Party Full Swing 1905 Aston Ave Carlsbad, CA 92008 USA +1 800.798.9094 https://www.fullswing.com Disclaimer Full Swing has made every effort to provide clear, complete, and accurate information in the Full Swing Launch Monitor Safety Manual (Safety Manual). Full Swing will not be held responsible for issues arising due to typographical errors, or operator interpretation of the language used herein, that is different from that intended by Full Swing. All safety information and guidelines are subject to change due to changes in local, federal, and all other applicable laws. Full Swing reserves the right to revise this document and to make changes in the content hereof, without obligation to notify any person or persons of such revisions or changes. In no event shall Full Swing, its employees, or authorized representatives be liable for any damages or losses, direct or indirect, arising from the use of any technical or operational information contained in this Safety Manual. Copyright Notice This Safety Manual is copyright 2001-2021 Full Swing. All worldwide rights and remedies under all intellectual property laws and industrial property laws are reserved. Full Swing Registered U.S. Patent and Trademark Office. Translation Disclaimer This document was originally prepared in English and any translations are provided for convenience only. While reasonable efforts were made to provide accurate translations, Full Swing will not be held responsible for any errors, omissions, or ambiguities. Full Swing Launch Monitor Safety Manual Introduction This Safety Manual includes safety guidelines for correct use of the Launch Monitor system, instructions for setting up and using the Launch Monitor system, reference material on Launch Monitor system administrative utilities and diagnostic functions, and a summary of other documentation included with the Launch Monitor system or available from Full Swing. Note: This Safety Manual is included in the purchase of a new Launch Monitor system. Customers with an existing Launch Monitor system using an earlier software release version should also review this Safety Manual, as there may have been changes in how the software is installed and how it should be used. Document Change History Date MM/DD/YYYY Section(s) Description TBD All Initial release Full Swing Launch Monitor Safety Manual Explanation of Symbols Symbol Meaning Description Caution This symbol indicates a potentially hazardous situation that could result in minor or moderate injury to the Launch Monitor system or operator. The Safety Manual and the safety precautions must be consulted in all cases where this symbol appears. Warning This symbol indicates the presence of hazardous voltages inside the cover (there are no operator- serviceable components inside the Launch Monitor system). Do not remove the Launch Monitor system covers. Alternating Current This symbol indicates Alternating Current Direct Current This symbol indicates Direct Current On/Off (Power) This symbol indicates the power button Class II device Products marked with this symbol are Class II devices. These devices are not provided with a grounding-type plug (depending on power supply). Indoor use only This device is designed primarily for indoor use (depending on power supply). Full Swing Launch Monitor Safety Manual Compliance Statements: Federal Communications Commission (FCC) Statement The equipment described in the Safety Manual generates, and may radiate, radio-frequency energy. If not used in accordance with Full Swing instructions, there may be interference with radio and television reception. Note: The Launch Monitor system has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The Launch Monitor system generates, uses, and may radiate radio frequency energy, and if not installed and used in accordance with instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in an installation. If the Launch Monitor system does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the operator is encouraged to try to correct the interference by taking one or more of the following measures:  Reorient or relocate the receiving antenna  Increase the separation between the Launch Monitor system and receiver  Connect the Launch Monitor system to an outlet on a circuit different from the one which the receiver is currently connected  Consult the dealer or an experienced radio/TV technician for help Modifying the Launch Monitor system without the written authorization of Full Swing may result in the Launch Monitor system no longer complying with FCC requirements for Class B digital devices. In that event, the customer’s right to use the Launch Monitor system may be limited by FCC regulations, and the customer may be required to correct any interference to radio or television communications at the customer’s own expense. Note: This Launch Monitor system complies with Part 15 of the FCC Rules, operations subjected to the following two conditions (1) this Launch Monitor system may not cause harmful interference, and (2) this Launch Monitor system must accept any interference received, including that which may cause undesirable interference. CAUTION: Exposure to Radio Frequency Radiation. The Launch Monitor system shall be used in such a manner that the potential for human contact is minimized. This Launch Monitor system complies with FCC radiation exposure limits set forth for an uncontrolled environment. This Launch Monitor system must be installed and operated with a minimum dista…

Text truncated - open the document above for the full version.

June 23, 2021 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject:Limited Agency Agreement Full Swing Golf Inc. FCC ID: 2AY26-FSKIT1 To Whom It May Concern: We, Full Swing Golf Inc, hereby authorized CKC Certification Services, LLC (CKC CS) to act as our Agent for the purpose of preparing application for FCC ID number (2AY26-FSKIT01) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is June 23, 2021. The Limited Agency Agreement expires on September 30, 2021, unless sooner terminated or extended by written notice to CKC Certification Services, LLC (CKC CS) and the Federal Communications Commission. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Daniel Weitzner

June 23, 2021 Attention: Application Examiner RE: Request for Confidentiality Applicant: Full Swing Golf Inc FCC ID: 2AY26-FSKIT1 To Whom It May Concern: Permanent Confidentiality Request is hereby submitted by Full Swing Golf to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Schematics  Detailed Block Diagrams  Detailed Operational/Functional Description Short-term Confidentiality Request is hereby submitted by Full Swing Golf to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:  Test setup photos  External photos  Internal photos  User Manual Rationale for request for confidentiality: Full Swing Golf Inc has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, Daniel Weitzner Senior Director of Engineering Full Swing Golf Inc

External Photos Front of Unit Back of unit Right and Left Sides Top and Bottom

RAW GRAPHIC (outlined art) REFERENCE (editable vector) ENGINEERING: SOURCING: MARKETING: DESIGN: COMPANY:DATE: PAGE: SCALE: REV: NOTE: All measurements in millimeters. Dimensions are for reference only. THIS DRAWING IS A CONFIDENTIAL DISCLOSURE. THE SUBJECT MATTER OF WHICH IS PROPERTY OF FULL SWING GOLF. ALL RIGHTS RESERVED CONFIDENTIAL & PROPRIETARY. JOHN DELEON NICK NEWMAN 11 UPDATE:UNIQUE INFO LAYOUT EVAN ELSADEN BLAIR MILLER FULL SWING GOLF ENVIRONMENTAL: UV, WATER, TEMP (0°C-50°C) MATERIAL: COMPUcal Excel 21440 MTC-722 Matte, White THICKNESS: <0.5mm INK: BLACK FINAL ART PENDING 020155 - LABELNOTES 07/16/2021 1 / 1 1:1 Unique Information: PN, SN, Bar Codes MN: FSKIT1102 SN: 0000000000 Made in Canada FCC ID: 2AY26-FSKIT1 Contains FCC ID: VPYLBEE5HY1MW CONF TO UL STD 62368-1 CERT TO CSA STD C22.2 #62368-1 XXXXXX [RECESSED AREA] [020118 - BASE] BLEED 1pt oset DIE LINE 18.6 mm (without bleed) 47.0 mm (without bleed) SN BARCODE

June 23, 2021 Federal Communications Commission Subject: ID Label Full Swing Golf Inc. FCC ID: 2AY26-FSKIT1 To Whom It May Concern Pursuant to the provisions of KDB 784748 D02 e labeling, we hereby provide the following statement: This device has an integrated display screen and can present the required information electronically (e-label) in leu of a physical label or name plate. The end user can access the electronic label with three steps. The information in the electronic label is programs by Full Swing Golf Inc. and can not be modified by any third party. Instructions to Locate Regulatory Information on the KIT 1. Select Menu > 2. Legal and Regulatory. 3. Select from the following options: • Regulatory Certifications • RF Exposure Warning Sincerely, Daniel Weitzner

Internal Photos Back Housing Back Housing Interior housing / Frame Interior housing / Frame Front housing / Radome OLED Display and Display Cover Base / Foot Battery Digital Board Digital Board RF Board RF Board MP Board MP Board Camera Module Camera Module

RADIO FREQUENCY EXPOSURE REPORT FOR THE Golf Launch Monitor Model: FSKIT1* (*See Manufacturer Declaration) Report No.: 105187-10 Date of issue: April 16, 2021 PREPARED FOR: Daniel Weitzner Full Swing Golf Inc. 1905 Aston Ave #100 Carlsbad, CA 92008-7392 PREPARED BY: S. Yamamoto CKC Laboratories, Inc. 5046 Sierra Pines Drive Mariposa, CA 95338 The test data contained in this report documents the observed testing parameters pertaining to and are relevant for only the sample equipment tested in the agreed upon operational mode(s) and configuration(s) as identified herein. Compliance assessment remains the client’s responsibility. This report may not be used to claim product endorsement by A2LA or any government agencies. This test report has been authorized for release under quality control from CKC Laboratories, Inc. Steve Behm Director of Quality Assurance & Engineering Services CKC Laboratories, Inc. Page 2 of 10 Report No: 105187-10 Purpose: To demonstrate compliance with United States, Canada, Australia and/or European Union RF Exposure requirements for Portable equipment (devices used ≤20cm from the body) with power output below exemption levels or Mobile equipment (devices used >20cm from the body) where Maximum Permissible Exposure (MPE) Calculations apply. Device and Antenna Operating Configuration: Device operating at maximum output power with continuous transmission of data. Test Procedure: This equipment is evaluated in accordance with the guidelines set forth in KDB 447498 & ANSI C95.1 for the US, Health Canada Safety Code 6 & RSS 102 for Canada, ARPANSA RPS3 for AU and EN 62479 or EN 62311 for EU. Other Considerations: Report considers stand-alone configurations only. RF Exposure limits are calculated at the mid-point of each operating band. Multi-transmitter devices are assumed to permit simultaneous transmission, unless indicated otherwise. Simultaneous transmissions aggregated providing a worst case assessment. Referenced Test Reports: The following test reports were referenced in conjunction with this assessment: CKC Laboratories Inc. report number 105187-6 and MRT Technology Co., Ltd report number 1802WSU008-U6. Manufacturer Declaration The following device and model has been tested by CKC Laboratories: Device: Golf Launch Monitor Model: FSKIT1101 Since the time of testing, the manufacturer declares that the EUT should be referenced by its base model name and that any differences between the names does not affect their EMC characteristics and therefore meets the level of testing equivalent to the tested model name. Base Model ID: FSKIT1 Page 3 of 10 Report No: 105187-10 RF Exposure Power Density Assessment (Multi Transmitter, Simultaneous Transmission) MPE Calculation: 푃표푤푒푟 퐷푒푛푠푖푡푦 ( 푆 ) = 퐸퐼푅푃 4휋 푑 2 Given: EIRP in mW or W and d in cm or m For multi-band devices with simultaneous transmission, assessment of compliance to MPE limits is based on fractional analysis for each band of operation: ∑ 푆 푖 푀푃퐸 퐿푖푚푖푡 푖 푖 ≤1. US MPE Assessment Power Reported is: ☒ Peak ☐ Average Limit Used is: ☒ General Population ☐ Occupational Exposure Operating Band MHz Power dBm Ant Type/Gain dBi EIRP dBm Distance cm MPE mW/cm 2 Limit mW/cm 2 S/Limit 2402 to 2480 9.42 0.1 9.52 20 0.0018 1 0.0018 5745 to 5825 14.42 -0.4 14.02 20 0.0050 1 0.0050 24078 to 24172 31 0 31 20 0.2505 1 0.2505 Aggregate: 0.2573 Page 4 of 10 Report No: 105187-10 Summary: Exemptions: Equipment demonstrating compliance by portable RF exposure exemption have been evaluated, without further testing, for use under either portable or mobile RF exposure configurations. Additional configurations including collocation or simultaneous transmission with other transmitters (including necessary separation distances) are subject to further assessment. Certain exemption criteria may define specific separation distances. It is assumed that the manufacturer shall design the equipment such that these minimum separation distance is met. MPE Calculation Results: Equipment demonstrating compliance with MPE calculations have been evaluated, without further testing, for use under mobile RF exposure configurations as identified herein. Additional configurations including collocation or simultaneous transmission with other transmitters (including necessary separation distances) are subject to further assessment. It is assumed that the manufacturer shall design the equipment such that the minimum separation distance of 20cm (or greater, as listed above) is met or that the manufacturer provides a protection guide (e.g. installation instructions) to the end user such that the antenna(s) may be installed in accordance with the manufacturer’s instructions in such a manor to maintain the minimum separation distance. General Comments: The absorption and distribution of Electromagnetic energy in the body is a very complex phenomena that depends on the mass, shape and physiological condition of the body; the orientation of the body with respect to the fields; and, the electrical properties of the body and the environment. Variables that may play a substantial role in possible biological effects are those that characterize the environment (including but not limited to: ambient temperature, air velocity, relative humidity and body insulation); and those that characterize the individual (including but not limited to: age, gender, activity level and existing debilitation or disease). Because innumerable factors may interact to determine specific biological effects of exposure to electromagnetic fields, any protection guide should consider both intended and unintended operational environments and provide guidance for installation and use of the product such that proper separation distances can be maintained. (ANSI C95.1) Page 5 of 10 Report No: 105187-10 APPENDIX A - RF Exposure Limits United States Compliance Requirements (1.1310): RF Exposure Evaluation Limits Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Fi…

Text truncated - open the document above for the full version.

This report contains a total of 33 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc. Full Swing Golf, Inc. REVISED TEST REPORT TO 105187-6 Golf Launch Monitor Model: FSKIT1* (*See Appendix A for Manufacturer Declaration) Tested to The Following Standards: FCC Part 15 Subpart C Section(s) 15.245 (24.075GHz to 24.175GHz) Report No.: 105187-6A Date of issue: Juy 15, 2021 This test report bears the accreditation symbol indicating that the testing performed herein meets the test and reporting requirements of ISO/IEC 17025 under the applicable scope of testing for CKC Laboratories, Inc. We strive to create long-term, trust based relationships by providing sound, adaptive, customer first testing services. We embrace each of our customers’ unique EMC challenges, not as an interruption to set processes, but rather as the reason we are in business. Test Certificate # 803.01 Page 2 of 33 Report No.: 105187-6A TABLE OF CONTENTS Administrative Information .......................................................................................................................... 3 Test Report Information ............................................................................................................................................ 3 Revision History ......................................................................................................................................................... 3 Report Authorization ................................................................................................................................................. 3 Test Facility Information ............................................................................................................................................ 4 Software Versions ...................................................................................................................................................... 4 Site Registration & Accreditation Information .......................................................................................................... 4 Summary of Results ................................................................................................................................................... 5 Modifications During Testing ..................................................................................................................................... 5 Conditions During Testing.......................................................................................................................................... 5 Equipment Under Test ............................................................................................................................................... 6 General Product Information..................................................................................................................................... 6 FCC Part 15 Subpart C ................................................................................................................................... 8 2.1049 Occupied Bandwidth...................................................................................................................................... 8 15.245(b) Field Strength of Fundamental ................................................................................................................ 11 15.245(b)(1)(i) and (ii) Field Strength of Harmonics ................................................................................................ 15 15.245(b)(3) Field Strength of Radiated Emissions and Band Edge ......................................................................... 20 Appendix A: Manufacturer Declaration ...................................................................................................... 31 Supplemental Information .......................................................................................................................... 32 Measurement Uncertainty ...................................................................................................................................... 32 Emissions Test Details .............................................................................................................................................. 32 Page 3 of 33 Report No.: 105187-6A ADMINISTRATIVE INFORMATION Test Report Information REPORT PREPARED FOR: REPORT PREPARED BY: Full Swing Golf Inc. 1905 Aston Ave #100 Carlsbad, CA 92008-7392 Terri Rayle CKC Laboratories, Inc. 5046 Sierra Pines Drive Mariposa, CA 95338 Representatives: Erin Littell - F-Squared Laboratories Daniel Weitzner – Full Swing Golf, Inc. Project Number: 105187 Customer Reference Number: 5266R1 DATE OF EQUIPMENT RECEIPT: March 18, 2021 DATE(S) OF TESTING: March 18-19, 2021 Revision History Original: Testing of the Golf Launch Monitor Model: FSKIT1 to FCC Part 15 Subpart C Section(s) 15.245 (24.075GHz to 24.175GHz). Revision A: To clarify on the data that testing was performed with a fresh battery. Report Authorization The test data contained in this report documents the observed testing parameters pertaining to and are relevant for only the equipment provided by the client, tested in the agreed upon operational mode(s) and configuration(s) as identified herein. Compliance assessment remains the client’s responsibility. This report may not be used to claim product endorsement by A2LA or any government agencies. This test report has been authorized for release under quality control from CKC Laboratories, Inc. Steve Behm Director of Quality Assurance & Engineering Services CKC Laboratories, Inc. Page 4 of 33 Report No.: 105187-6A Test Facility Information Our laboratories are configured to effectively test a wide variety of product types. CKC utilizes first class test equipment, anechoic chambers, data acquisition and information services to create accurate, repe…

Text truncated - open the document above for the full version.

Full Swing Golf, Inc. TEST SETUP PHOTOS Golf Launch Monitor Model: FSKIT1 Tested to The Following Standards: FCC Part 15 Subpart C Section(s) 15.245 (24.075GHz to 24.175GHz) Report No.: 105187-6 Date of issue: June 16, 2021