2AY33-ADEC43053643.0536.00

86.0924.00 Rev 1 A-dec Connectivity Instructions for UseRegulatory Information A-dec Wireless Module ProductModel A-dec Wireless Module43.0536.00 The A-dec Wireless Module device enables connection of the dental equipment to the A-dec Web App via Wi-Fi (Dual Band 802.11a/b/g/n/ac) and Bluetooth 5.0 BR/EDR/LE. NOTE To satisfy RF exposure require- ments, this device and its antenna must operate with a separation distance of at least 20 cm from all persons. Canada - ISED ProductIC Number A-dec Wireless Module27025-ADEC430536 For indoor use only. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.This device may not cause interference. 2.This device must accept any interference, including interference that may cause undesired operation of the device. Utilisation en intérieur uniquement. Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1.l’appareil ne doit pas produire de brouillage, et 2.l’appareil doit accepter tout brouillage radioélec- trique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 86.0924.00 Rev 1 A-dec Connectivity Instructions for UseRegulatory Information FCC ID ProductFCC ID A-dec Wireless Module2AY33-ADEC430536 FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.This device may not cause harmful interference. 2.This device must accept any interference received, including interference that may cause undesired opera- tion. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Compliance with FCC Requirement 15.407(c) Data transmission is always initiated by software, which is passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: ±20 ppm This transmitter in this device must not be co-located or operated in conjunction with any other antenna or transmitter. A-dec Headquarters 2601 Crestview Drive Newberg, Oregon 97132 United States Tel: 1.800.547.1883 within USA/CAN Tel: +1.503.538.7478 outside USA/CAN Fax: 1.503.538.0276 www.a-dec.com A-dec Australia Unit 8 5-9 Ricketty Street Mascot, NSW 2020 Australia Tel: 1.800.225.010 within AUS Tel: +61.(0).2.8332.4000 outside AUS A-dec China A-dec (Hangzhou) Dental Equipment Co., Ltd. 528 Shunfeng Road Qianjiang Economic Development Zone Hangzhou 311100, Zhejiang, China Tel: 400.600.5434 within China Tel: +86.571.89026088 outside China A-dec United Kingdom Austin House 11 Liberty Way Nuneaton, Warwickshire CV11 6RZ England Tel: 0800.ADEC.UK (2332.85) within UK Tel: +44.(0).24.7635.0901 outside UK 86.0924.00 Rev 1 Date of Issue: 2021-10-7 Copyright 2021 A-dec Inc. All rights reserved. IFUhalf ÍvÈ.Ç)8È.00jÎ

2601 Crestview Dr Newberg, OR 97132 [email protected] a-dec.com Date: 11/16/2021 To the attention of: Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AY33‐ADEC430536 To Whom It May Concern: A-dec, Inc. is seeking the limited modular approval of device A-dec Wireless Module, model 43.0536.00, under CFR47, parts 15.247 and 15.407. We hereby declare that this device will enable only WLAN 2.4GHz & 5GHz, BT and BTLE functions. Product functions are controlled through proprietary firmware and is not user changeable. This product is intended for installation in A-dec devices only and will not be available for sale. If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you Regulatory Engineer Tel: 503.538.9471 ext. 2255 E-mail: [email protected]

2601 Crestview Dr Newberg, OR 97132 [email protected] a-dec.com October 27, 2021 Dear Application Examiner: A-dec, Inc., model 43.0536.00, FCC ID 2AY33‐ADEC430536, is seeking modular approval. The radio meets the requirements for modular approval as detailed in FCC 15.212. Compliance to each of the requirements is described below: 1. “The modular transmitter must have its own RF shielding.” The radio portion of the module is contained in its own RF shielding. The shielding is installed at the factory. Please see the Internal Photos exhibit. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs (U1) to ensure compliance with Part 15 requirements under conditions of excessive data rates or over- modulation. Please see schematics and documentation from manufacturer of transmitter (Murata). 3. “The modular transmitter must have its own power supply regulation.” The EUT has its own power supply regulation to ensure compliance with Part 15 requirements regardless of the quality or level of external DC supplying the module from the host unit. Please see Schematics exhibit. Also, the technical report exhibit contains AC power line conducted emissions data taken with the EUT powered from a linear power supply that contains no EMC suppression components. 4. “The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c).” The EUT meets the FCC antenna requirements. Please see Antenna information exhibit and internal photos exhibit. 5. “The modular transmitter must be tested in a stand-alone configuration.” The EUT was tested a carrier board that supplies the voltage and electrical interfaces needed to operate it. This carrier board will be marketed with the module, per Part 15.27(a). Please see test setup photos exhibit and technical report exhibit. 6. “The modular transmitter must be labeled with its own FCC ID number.” The EUT is labeled with its own FCC ID number. Please see FCC ID label & location exhibit. If the FCC ID number will not be visible when the module is installed inside a host device, another label with the FCC ID will be applied to the exterior of the host device. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the User Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements for distances above 20 cm, not body-worn accessories for the general population. Please see RF Exposure Exhibit. Please contact me if you have additional questions. Your attention to this matter is greatly appreciated. Best regards, Raquel Peregrino de Brito Senior Regulatory Engineer Tel: 503.538.9471 ext. 2255 E-mail: [email protected]

2601 Crestview Dr Newberg, OR 97132 [email protected] a-dec.com CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 October 27, 2021 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457(d) and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Company requests confidentiality for the following products: FCC ID Number Product: 2AY33-ADEC430536 Title/Model A‐dec Wireless Module/43.0536.00 For the product stated above, we request that the following information be held confidential: 1.Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: “Schematics”. 2.Block diagram submitted as Equipment Authorization Electronic Filing attachment: “blockdiagram”. 3.Operational description submitted as Equipment Authorization Electronic Filing attachment: “operational description” The above exhibits contain Company trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withheld from public inspection. Raquel Peregrino de Brito Senior Regulatory Engineer Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, A-dec, Inc. requests that the Commission withholds the following documents from public viewing for one hundred and eighty days after the date the grant of equipment authorization is issued: •External Photographs •Internal Photographs •Test Setup Photographs •User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by A-dec, Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm A-dec, Inc. by giving competitors an unfair market advantage. A-dec, Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

43.0536.00

Antenna Info for 43.0536.00 Manufacturer: Pulse Larsen Model Number: W3006 Gain (dBi) Frequency1 (2.4-2.5GHz): 2.2dBi Frequency2 (5.15-5.85GHz): 5.2dBi Description: 2.4-2.5/5.15-5.85GHz Dual band Ceramic Chip 10x3.2x1.5mm Drawing or photograph: FCC 15.203 Compliance: Antenna is a surface mount ceramic chip package soldered directly to the PCB. Antenna is not a user serviceable part.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. A-dec, Inc. 43.0536.00 FCC 1.1307:2022 802.11 b/g/n 802.11 ac/an Bluetooth Bluetooth Low Energy Report: A-DE0162.12, Issue Date: March 14, 2022 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: March 14, 2022 A-dec, Inc. EUT: 43.0536.00 RF Exposure Evaluation Standards Specification Method FCC 1.1307:2022 FCC 1.1307:2022 Results Method Clause Description Applied Results Comments (b)(3)(i)(B) Exemption From RF Exposure Evaluation Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. A-DE0162.12EAR-Controlled Data2/11 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. A-DE0162.12EAR-Controlled Data3/11 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. A-DE0162.12EAR-Controlled Data4/11 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. A-DE0162.12EAR-Controlled Data5/11 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: A-dec, Inc. Address: 2601 Crestview Dr Building 4 City, State, Zip: Newberg, OR 97132-9528 Evaluation Requested By: Russell Perkins EUT: 43.0536.00 Date of Evaluation: March 14, 2022 Information Provided by the Party Requesting the Evaluation Functional Description of the Equipment: A-dec module 43.0536.00 (FCC ID:2AY33-ADEC430536) will enable data collection of the dental equipment system performance and software upgrade capability in the field using Ethernet/WiFi/BT connections within the dental clinic. 23.27L x30W x3.1H mm Objective: To demonstrate compliance with FCC Requirements for RF exposure for 1.1307 RF exempt devices Report No. A-DE0162.12EAR-Controlled Data6/11 RF Exposure Condition 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Mobile Location on Body (if applicable) Head/Torso How is t…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. A-dec, Inc. 43.0536.00 FCC 15.407:2021 RSS-247 Issue 2:2017 802.11 a/b/g/n/ac SISO Radio Report: A-DE0170 Rev. 1, Issue Date: March 12, 2022 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: September 17, 2021 A-dec, Inc. EUT: 43.0536.00 Radio Equipment Testing Standards Specification Method FCC 15.407:2021 ANSI C63.10:2013, KDB 789033, KDB 905462 D02 RSS-247 Issue 2:2017 ANSI C63.10:2013, KDB 789033, KDB 905462 D02 Results Method Clause Test Description Applied Results Comments KDB 905462 (D02) -7.5 DFS Testing - Test Signal Level No N/A Not required if EUT is a "Client" without radar detection. KDB 905462 (D02) -7.7 DFS Testing - Channel Loading and Channel Utilization Yes Pass KDB 905462 (D02) -7.8.1 DFS Testing - Detection Bandwidth No N/A Not required if EUT is a "Client" without radar detection. KDB 905462 (D02) -7.8.2 DFS Testing - Channel Availability Check No N/A Not required if EUT is a "Client" without radar detection. KDB 905462 (D02) -7.8.3 DFS Testing – Channel Move Time Yes Pass KDB 905462 (D02) -7.8.3 DFS Testing - Closing Time Yes Pass KDB 905462 (D02) -7.8.3 DFS Testing - Non Occupancy Period Yes Pass KDB 905462 (D02) -7.8.4 DFS Testing - Statistical Performance No N/A Not required if EUT is a "Client" without radar detection. N/A DFS Testing - DFS Product Information Yes N/A A1 Product Information filled out by the manufacturer and included in the test report. Deviations From Test Standards None Approved By: Kyle Holgate, Operations Manager Report No. A-DE0170 Rev. 1EAR-Controlled Data2/35 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Added RSS-247 Issue 2:2017 specification to the test report 2022-03-10 1, 2, 17, 22, 26, 29 Updated test descriptions 2022-03-10 16, 21, 25, 28 Added additional comments 2022-03-10 17, 22, 26, 29 Added Introduction Client DFS section to the test report 2022-03-10 12-15 Added Appendix – DFS Product Information to the test report 2022-03-10 32-35 Report No. A-DE0170 Rev. 1EAR-Controlled Data3/35 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. A-DE0170 Rev. 1EAR-Controlled Data4/35 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. A-dec, Inc. 43.0536.00 FCC 15.247:2021 Bluetooth Report: A-DE0162.6 Rev. 1, Issue Date: October 21, 2021 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: October 19, 2021 A-dec, Inc. EUT: 43.0536.00 Radio Equipment Testing Standards Specification Method FCC 15.207:2021 ANSI C63.10:2013, KDB 558074 FCC 15.247:2021 Results Method Clause Test Description Applied Results Comments 6.2 Powerline Conducted Emissions Yes Pass 6.5, 6.6 Spurious Radiated Emissions Yes Pass 7.5 Duty Cycle Yes Pass 7.8.2 Carrier Frequency Separation Yes Pass 7.8.3 Number of Hopping Frequencies Yes Pass 7.8.4 Dwell Time Yes Pass 7.8.5 Output Power Yes Pass 7.8.5 Equivalent Isotropic Radiated Power Yes Pass 7.8.6 Band Edge Compliance Yes Pass 7.8.6 Band Edge Compliance - Hopping Mode Yes Pass 7.8.7 Occupied Bandwidth Yes Pass 7.8.8 Spurious Conducted Emissions Yes Pass Deviations From Test Standards None Approved By: Kyle Holgate, Operations Manager Report No. A-DE0162.6 Rev. 1EAR-Controlled Data2/103 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Added boresighting block diagram. 2021-10-21 8 Added A-DE0162-7 configuration 2021-10-21 12 Retested powerline conducted emissions measuring AC mains as opposed to DC power. 2021-10-21 15-19 Power table updated to reflect appropriate modulations. 2021-10-21 14 Updated last date of test to October 19, 2021. 2021-10-21 2, 9, 13 Updated the Spurious Radiated Emissions test description. 2021-10-21 20 Report No. A-DE0162.6 Rev. 1EAR-Controlled Data3/103 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. A-DE0162.6 Rev. 1EAR-Controlled Data4/103 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 A2LA Lab Code: 3310.04 Lab Code: 3310.05 Lab Code: 3310.02 Lab Code: 3310.03 Lab Code: 3310.06 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. A-DE0162.6 Rev. 1EAR-Controlled Data5/103 MEASUREMENT UNCERTAINTY TMU.2015.07.10 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value.…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. A-dec, Inc. 43.0536.00 FCC 15.247:2021 Bluetooth DTS Report: A-DE0162.7 Rev. 1, Issue Date: October 21, 2021 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include insp…

Text truncated - open the document above for the full version.