2AY4A-TINA2S3D printer

Jiangsu Wiiboox Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Jiangsu Wiiboox Technology Co., Ltd. Address: Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China Product Name: 3D printer FCC ID: 2AY4A-TINA2S Model(s): TINA2S, TINA2Lite, TINA2mini, TINA2Plus, StarryPlus, D120, StarryPro, TINA3 2.911(d)(5)(i) Equipment Type We, [Jiangsu Wiiboox Technology Co., Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Bruce Xu Date: Jul. 29, 2024 Title: Sales director Company name: Jiangsu Wiiboox Technology Co., Ltd. Signature: NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu Wiiboox Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Jiangsu Wiiboox Technology Co., Ltd. Address: Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China Product Name: 3D printer FCC ID: 2AY4A-TINA2S Model(s): TINA2S, TINA2Lite, TINA2mini, TINA2Plus, StarryPlus, D120, StarryPro, TINA3 2.911(d)(5)(ii) Applicant filing We, [Jiangsu Wiiboox Technology Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Bruce Xu Date: Jul. 29, 2024 Title: Sales director Company name: Jiangsu Wiiboox Technology Co., Ltd. Signature: NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu Wiiboox Technology Co., Ltd. Agent Authorization Company: Jiangsu Wiiboox Technology Co., Ltd. Address: Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China Product Name: 3D printer Model Number(s): TINA2S, TINA2Lite, TINA2mini, TINA2Plus, StarryPlus, D120, StarryPro, TINA3 Product Description: 3D printer We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 29, 2024 Name: Bruce Xu Title: Sales director Company: Jiangsu Wiiboox Technology Co., Ltd.

Jiangsu Wiiboox Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jul. 29, 2024 Subject; Request for Confidentiality FCC ID: 2AY4A-TINA2S To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Bruce Xu Title: Sales director

Jiangsu Wiiboox Technology Co., Ltd. Model Difference Declaration To Whom It May Concern, We, Jiangsu Wiiboox Technology Co., Ltd. (3D printer) ; Model Number: TINA2S, TINA2Lite, TINA2mini, TINA2Plus, StarryPlus, D120, StarryPro, TINA3; Model Difference: All model’s the function, software and electric circuit are the same, only with a product color and model named different. Test sample mode: TINA2S. Please contact me if you have any question. Signature: Date: Jul. 29, 2024 Name: Bruce Xu Title: Sales director

FCC ID LABEL: Ca. 20mm x 30mm Label Location FCC ID: 2AY4A-TINA2S

MPE ESTIMATION FCC ID: 2AY4A-TINA2S 1, Limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 2, Estimation Result Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (linear) MPE (mW/cm²) BLE 3.42 3±1(4) 2.51 3.42 2.20 0.0011 EDR 6.43 6±1(7) 5.01 3.42 2.20 0.0022 2.4GWIFI 13.66 13±1(14) 25.12 3.42 2.20 0.011 Note: Note: The estimation distance is 20cm The device could not transmit simultaneously in BT and 2.4GWIFI Note: PK Output power= conducted power. Conducted power see the test report HK2407093734-1E/2E/3E When the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.011 which is< 1.0, RF Exposure testing is not required. -------The End-------

Page 1 of 72 Report No.: HK2407093734-1E FCC Test Report Test report On Behalf of Jiangsu Wiiboox Technology Co., Ltd. For 3D printer Model No.: TINA2S, TINA2Lite, TINA2mini, TINA2Plus, StarryPlus, D120, StarryPro, TINA3 FCC ID: 2AY4A-TINA2S Prepared For : Jiangsu Wiiboox Technology Co., Ltd. Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jul. 09, 2024 ~ Jul. 24, 2024 Date of Report: Jul. 24, 2024 Report Number: HK2407093734-1E Applican Address . Manufac t Address . Product d Trade Ma Product n Model an d Standard This publi the Shen source o f and will reproduc e Date of Te Date (s) o Date of Is Te s t R e su t’s name ... .................. turer's Nam .................. description rk: ame ............ d/or type re ds ............... ication may zhen HUA fthe materi not assu m ed material est ............. of performan ssue ............ ult ................ Te s Te c Aut ............... : ............... : me ........... : ............... : n ................. : eference . : ............... : y be reprod K Testing T al. Shenzhe me liability due to its p .................. nce of tests .................. .................. sting Engine chnical Man thorized Sig Test Re Jiangsu W Xingmin In District, Na Jiangsu W Xingmin In District, Na N/A 3D printer TINA2S, T StarryPro, FCC Rule s ANSI C63. uced in wh Technology en HUAK T for damag placement a ............. : ............. : ............. : ............. : eer : nager : gnatory : Page 2 of 7 sult Cert Wiiboox Tech ndustrial Pa anjing, Jian Wiiboox Tech ndustrial Pa anjing, Jian TINA2Lite, T TINA3 s and Regu .10: 2013 ole or in p a y Co., Ltd. Testing Tech ges resultin and context. Jul. 09, 202 Jul. 24, 202 Pass 72 tification hnology Co. ark, No. 128 gsu Provinc hnology Co. ark, No. 128 gsu Provinc TINA2mini, T lations Part art for non-c is acknow hnology Co ng from the 24 ~ Jul. 24, 24 (Len Liao (Sliver Wa (Jason Zh o Report N n ., Ltd. 8 Keyuan Ro ce, China ., Ltd. 8 Keyuan Ro ce, China TINA2Plus, 15 Subpart commercia wledged as o., Ltd. take e reader's 2024 o) an) ou) No.: HK2407 oad, Jiangn oad, Jiangn , StarryPlus t C Section l purposes copyright o es no respo interpreta t 7093734-1E ning ning s, D120, 15.247 as long as owner and nsibility for tion of the Page 3 of 72 Report No.: HK2407093734-1E Table of Contents 1. Test Result Summary ............................................................................... 5 1.1. Test Procedures and Results ........................................................................................................... 5 1.2. Information of the Test Laboratory ................................................................................................. 5 1.3. Measurement Uncertainty ................................................................................................................ 6 2. EUT Description ........................................................................................ 7 2.1. General Description of EUT ............................................................................................................. 7 2.2. Carrier Frequency of Channels ........................................................................................................ 8 2.3. Operation of EUT During Testing .................................................................................................... 8 2.4. Description of Test Setup ................................................................................................................. 9 2.5. Description of Support Units ......................................................................................................... 10 3. Genera Information ................................................................................. 11 3.1. Test Environment and Mode .......................................................................................................... 11 4. Test Results and Measurement Data .................................................... 14 4.1. Conducted Emission ....................................................................................................................... 14 4.2. Test Result ....................................................................................................................................... 16 4.3. Maximum Conducted Output Power ............................................................................................. 18 4.4. Emission Bandwidth ....................................................................................................................... 20 4.5. Power Spectral Density .................................................................................................................. 26 4.6. Conducted Band Edge and Spurious Emission Measurement .................................................. 33 4.7. Radiated Spurious Emission Measurement ................................................................................. 43 4.8. Antenna Requirement ..................................................................................................................... 69 5. Photograph of Test ................................................................................. 70 6. Photos of the EUT ................................................................................... 72 Page 4 of 72 Report No.: HK2407093734-1E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Jul. 24, 2024 Jason Zhou Page 5 of 72 Report No.: HK2407093734-1E 1. Test Result Summary 1.1. Test Procedures and Results Requirement CFR 47 Section Result Antenna requirement §15.203/§15.247(b)(4) PASS AC Power Line Conducted Emission §15.207 PASS Conducted Pea…

Text truncated - open the document above for the full version.

Page 33 of 72 Report No.: HK2407093734-1E 4.6. Conducted Band Edge and Spurious Emission Measurement Test Specification Test Requirement: FCC Part15 C Section 15.247 (d) Test Method: KDB 558074 D01 15.247 Meas Guidance v05r02 Limit: In any 100 kHz bandwidth outside of the authorized frequency band, the emissions which fall in the non-restricted bands shall be attenuated at least 20 dB / 30dB relative to the maximum PSD level in 100 kHz by RF conducted measurement and radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a). Test Setup: Test Mode: Transmitting mode with modulation Test Procedure: 1. The testing follows FCC KDB Publication 558074 D01 15.247 Meas Guidance v05r02. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. Set to the maximum power setting and enable the EUT transmit continuously. 4. Set RBW = 100 kHz, VBW=300 kHz, Peak Detector. Unwanted Emissions measured in any 100 kHz bandwidth outside of the authorized frequency band shall be attenuated by at least 20 dB relative to the maximum in-band peak PSD level in 100 kHz when maximum peak conducted output power procedure is used. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, the attenuation required under this paragraph shall be 30 dB instead of 20 dB per 15.247(d). 5. Measure and record the results in the test report. 6. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. Test Result: PASS Page 34 of 72 Report No.: HK2407093734-1E Test Instruments RF Test Room Equipment Manufacturer Model Serial Number Calibration Date Calibration Due Spectrum analyzer Agilent N9020A HKE-025 Feb. 20, 2024 Feb. 19, 2025 RF cable Times 1-40G HKE-034 Feb. 20, 2024 Feb. 19, 2025 RF automatic control unit Tonscend JS0806-2HKE-060 Feb. 20, 2024 Feb. 19, 2025 RF Test Software Tonscend JS1120-3 Version 3.3.23 HKE-083 N/A N/A Note: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to international system unit (SI). Test Data 802.11b Mo a odulation Lowes Ban Spuriou st Channel nd Edge us Emission P n Page 35 of 772 S Report N Highest C Band E Spurious E No.: HK2407 Channel Edge Emission 7093734-1E P Mi Spu Page 36 of 7 iddle Chan urious Emis 72 nnel ssion Report N No.: HK24077093734-1E 802.11g Mo odulation Lowes Ban Spuriou st Channel nd Edge us Emissio P n Page 37 of 772 S Report N Highest C Band E Spurious E No.: HK2407 Channel Edge Emission 7093734-1E P Mi Spu Page 38 of 7 iddle Chan urious Emis 72 nnel ssion Report N No.: HK24077093734-1E 802.11n (H HT20) Modu Lowes Ban Spuriou lation st Channel nd Edge us Emissio P l on Page 39 of 772 S Report N Highest C Band E Spurious E No.: HK2407 Channel Edge Emission 7093734-1E P Mi Spu Page 40 of 7 iddle Chan urious Emis 72 nnel ssion Report N No.: HK24077093734-1E 802.11n (H HT40) Modu Lowes Ban Spuriou lation st Channel nd Edge us Emissio P on Page 41 of 772 S Report N Highest C Band E Spurious E No.: HK2407 Channel Edge Emission 7093734-1E P Mi Spu Page 42 of 7 iddle Chan urious Emis 72 nnel ssion Report N No.: HK24077093734-1E Page 43 of 72 Report No.: HK2407093734-1E 4.7. Radiated Spurious Emission Measurement Test Specification Test Requirement: FCC Part15 C Section 15.209 Test Method: ANSI C63.10: 2013 Frequency Range: 9 kHz to 25 GHz Measurement Distance: 3 m Antenna Polarization: Horizontal & Vertical Operation mode: Transmitting mode with modulation Receiver Setup: Frequency Detector RBW VBW Remark 9kHz- 150kHzQuasi-peak200Hz 1kHz Quasi-peak Value 150kHz- 30MHz Quasi-peak9kHz 30kHz Quasi-peak Value 30MHz-1GHzQuasi-peak120KHz300KHz Quasi-peak Value Above 1GHz Peak 1MHz 3MHz Peak Value Peak 1MHz 10Hz Average Value Limit: Frequency Field Strength (microvolts/meter) Measurement Distance (meters) 0.009-0.490 2400/F(KHz) 300 0.490-1.705 24000/F(KHz) 30 1.705-30 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Frequency Field Strength (microvolts/meter) Measurement Distance (meters) Detector Above 1GHz 500 3 Average 5000 3 Peak Test setup: For radiated emissions below 30MHz 30MHz to 1GHz Page 44 of 72 Report No.: HK2407093734-1E Above 1GHz Test Procedure: 1. For the radiated emission test below 1GHz: The EUT was placed on a turntable with 0.8 meter above ground. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high PASS filter are used for the test in order to get better signal level. 2. For the radiated emission test above 1GHz: Place the measurement antenna on a turntable with 1.5 meter above ground, which is away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. Page 45 of 72 Report No.: HK2407093734-1E The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level 4. For measurement below 1GHz, If the emission level of the EUT measured by the peak detector is 3 dB lowe…

Text truncated - open the document above for the full version.

Page 1 of 43 Report No.: HK2407093734-3E FCC Test Report Test report On Behalf of Jiangsu Wiiboox Technology Co., Ltd. For 3D printer Model No.: TINA2S, TINA2Lite, TINA2mini, TINA2Plus, StarryPlus, D120, StarryPro, TINA3 FCC ID: 2AY4A-TINA2S Prepared For : Jiangsu Wiiboox Technology Co., Ltd. Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jul. 09, 2024 ~ Jul. 24, 2024 Date of Report: Jul. 24, 2024 Report Number: HK2407093734-3E Page 2 of 43 Report No.: HK2407093734-3E Test Result Certification Applicant’s name ................... : Jiangsu Wiiboox Technology Co., Ltd. Address .................................... : Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China Manufacturer's Name ............. : Jiangsu Wiiboox Technology Co., Ltd. Address .................................... : Xingmin Industrial Park, No. 128 Keyuan Road, Jiangning District, Nanjing, Jiangsu Province, China Product description Trade Mark: N/A Product name ............................. : 3D printer Model and/or type reference .. : TINA2S, TINA2Lite, TINA2mini, TINA2Plus, StarryPlus, D120, StarryPro, TINA3 Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of performance of tests ................ : Jul. 09, 2024 ~ Jul. 24, 2024 Date of Issue ............................................. : Jul. 24, 2024 Test Result ................................................. : Pass Testing Engineer : (Len Liao) Technical Manager : (Sliver Wan) Authorized Signatory : (Jason Zhou) Page 3 of 43 Report No.: HK2407093734-3E Contents Page 1 Test Summary ................................................................................................................................................ 5 1.1 Test Description ......................................................................................................................................... 5 1.2 Measurement Uncertainty ......................................................................................................................... 6 1.3 Information of the Test Laboratory ............................................................................................................ 6 2 General Information ....................................................................................................................................... 7 2.1 General Description of EUT ...................................................................................................................... 7 2.2 Description of Test Conditions .................................................................................................................. 9 2.3 Description of Test Setup ........................................................................................................................ 10 2.4 Description of Support Units .................................................................................................................... 11 3 Equipments List for All Test Items ............................................................................................................. 12 4 Test Result .................................................................................................................................................... 13 4.1 Antenna Requirement.............................................................................................................................. 13 4.2 Conduction Emissions Measurement ...................................................................................................... 14 4.3 Radiated Emissions Measurement .......................................................................................................... 18 4.4 Maximum Output Power Measurement ................................................................................................... 27 4.5 Power Spectral Density ........................................................................................................................... 28 4.6 6db Bandwidth ......................................................................................................................................... 31 4.7 Occupied Bandwidth ................................................................................................................................ 34 4.8 Band Edge ............................................................................................................................................... 35 4.9 Conducted Spurious Emissions .............................................................................................................. 37 5 Test Setup Photo ......................................................................................................................................... 41 6 Photos of the EUT ........................................................................................................................................ 43 Page 4 of 43 Report No.: HK2407093734-3E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Jul. 24, 2024 Jason Zhou Page 5 of 43 Report No.: HK2407093734-3E 1 Test Summary 1.1 Test Description Test Item Test Requiremen…

Text truncated - open the document above for the full version.

Prepared by: Xu Ying Approved by: Xu Kai TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 OTA TEST REPORT TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2021. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Applicant Espressif Systems Product ESP ANT B Model ESP ANT B Report No. Y2302A0204-T1 Issue Date March 22, 2023 OTA Test Report Report No: Y2302A0204-T1 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 19 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. Test Laboratory .............................................................................................................................. 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Test Facility ....................................................................................................................... 3 1.3. Testing Location ................................................................................................................ 3 1.4. Laboratory Environment .................................................................................................... 3 2. General Description of Equipment Under Test .............................................................................. 4 2.1. Applicant and Manufacturer Information ............................................................................ 4 2.2. General Information ........................................................................................................... 4 2.3. Test Date ........................................................................................................................... 4 2.4. Received Date ................................................................................................................... 4 2.5. Applied Standards ............................................................................................................. 5 3. Test Conditions .............................................................................................................................. 6 3.1. Test Configuration ............................................................................................................. 6 3.2. Test Measurement ............................................................................................................. 6 4. Test Results ................................................................................................................................... 7 4.1. Gain and Efficiency ............................................................................................................ 7 4.2. Voltage Standing Wave Ratio (VSWR) .............................................................................. 8 4.3. Antenna S11 ...................................................................................................................... 9 5. Equipment List ............................................................................................................................. 10 ANNEX A: 2-D Pattern Plots .................................................................................................................... 11 ANNEX B: The EUT Appearance and Test Configuration........................................................................ 17 B.1 EUT Appearance ................................................................................................................... 17 B.2 Test Configuration ................................................................................................................. 19 OTA Test Report Report No: Y2302A0204-T1 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 19 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test Facility A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3. Testing Location Company: …

Text truncated - open the document above for the full version.