2AY4X-DOLPApp Control Smart Kegel Exercise Balls

1 App Control Smart Kegel Exercise Balls Dolp will let you enjoy a wonderful feeling with its user-friendly design and exciting usage. It can be used in many ways to meet your requirements on different occasions. If you have any ideas or comments about our products during use, please feel free to contact us. Your feedback will help us to develop and improve more exciting and innovative product. Turn off the device before charging. The cable can be compatible with any port or USB/AC power adapter for charging. It takes about 1.5 hours to get fully charged. The indicator light will flash when charging and will stay 2 on when it is fully charged. And also you can check the device battery power in App. Manual Mode Please press and hold the on/off button for 2-3 seconds to turn on/off the device, and then press the on/off button to switch to manual mode after the device turns on. App Mode Please scan the QR code to download the App, or search “Dolp” to download on the App Store or Google Play. Press and hold the button for 2-3 seconds to start the device. Open the App and click the icon in the upper right corner of the interface to enter the device search. 3 After finding the device,click it to connect. The device’s work light will stay on when the connection is successful and the icon will turn to be . In App Mode, Multiple Control Modes Are Available: 1. Touch Mode: The App controls the device to vibrate at different frequencies according to where the finger touches the screen. 2. Sound Mode: The App controls the vibration of the device according to the sound decibel volume. If the decibel level of the sound is high, the vibration will be strong, and if the decibel level is low, the vibration will be weak. 3. Music Mode: The App controls the vibration of the device according to the frequency and tone of the music, which can be played in single, loop, or random mode. 4. Video Mode: The App controls the vibration of the device according to the sound volume of the video. 5. E lection Mode: Select different frequency 4 modes to control the vibration of the device, and you can choose different frequency according to your preference. 6. Remote Mode: Click “+” in the top right corner, enter your friend’s user name and click Send. After verifying, your friend will appear on the list. When chatting, it supports multiple functions (including text, picture, voice, vibration curve sharing, request to control the other device, and request to control both devices to vibrate simultaneously). 7. My Vibration: the saved vibration curve files can be replayed to control the device or share with others. 8. Cloud Mode: Vibration curve files shared by others can be downloaded to your phone. P lay them to vibrate your device according to them and make you experience the vibration curve of others. Curves you share will also be displayed here. 9. Setting: - Click the Profile Photo: Set your profile photo. - Vibration Point Selection: Select the location point where the device needs to be vibrated (point 5 G, point C or both). Use the default setting to point G when there are no more choices. - The Vibration of Point C/G: Set the vibration intensity of point C to be certain percentage of point G. Use the default setting when there are no more choices. - Turn Off the Device: When connected, the device can be turned off directly. - Battery Power: Display the current power of device. - Change Password: Change the login password of the current account. Use & Maintenance ● Please clean the device before and after use. You can clean it with warm water and mild soap. ● It is recommended to use water-based lubricant. Please apply an adequate amount of lubricants to the device and body before use. ● If the device's performance is not good, please charge it in time. ● Make sure the device is recharged at least once every 6 months. 6 Warning ● Store after drying. Keep it away from extreme cold, heat and humidity. ● Under no circumstances should you use Dolp into the anus. ● DO NOT use the device while charging. ● DO NOT boil in water. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 7 This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 8 Note For this product, Bluetooth is used for signal transmission to control the device operation. The work flow is to give commands by using the App and then transmit the commands to the device via Bluetooth. However, Bluetooth technology has its limitations, such as the…

Text truncated - open the document above for the full version.

Shenzhen Xuanhuo Tribe Technology Co., Ltd. Model difference statement Product Name: App Control Smart Kegel Exercise Balls Model N o.: Dolp, Dolp I, Dolp II, Dolp III We (Shenzhen Xuanhuo Tribe Technology Co., Ltd, Room C405-1, Jinluan International Business Building 2, Heping Road, Longhua District, Shenzhen, China) hereby state that all he model are the same circuit and RF module, except the appearance, color and model No.. Signature: Name: Leo Liu Title: CEO Tel: 0755-26659614 Email: [email protected] Date: 5.17.2021

C5266091_X8_Ed.1 1/1 Letter of Authorization Shenzhen Xuanhuo Tribe Technology Co., Ltd. Company: Shenzhen Xuanhuo Tribe Technology Co., Ltd. Address: Room C405-1,Jinluan International Business Building 2, Heping Road, Longhua District, Shenzhen, China Product Name: App Control Smart Kegel Exercise Balls Model Number: Dolp, Dolp I, Dolp II, Dolp III FCC Identifier: 2AY4X-DOLP We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Leo Liu Date: 5/14/2021 Title: CEO Signature of applicant:

C5266091_X10_Ed.1 1/1 Shenzhen Xuanhuo Tribe Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 5/14/2021 Subject: Request for Confidentiality FCC ID: 2AY4X-DOLP To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Leo Liu Date: 5/14/2021 Title: CEO

1 - Page 1 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Photo 1 (For model Dolp) Photo 2 1 - Page 2 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 1 - Page 3 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 1 - Page 4 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7

Label & location

1 - Page 1 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Photo 1 (For model Dolp) Photo 2 1 - Page 2 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 1 - Page 3 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 1 - Page 4 of 4 - Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 BLE ANT

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi210301002-01E2 Date of issue: May 11, 2021 Applicant: Shenzhen Xuanhuo Tribe Technology Co. Ltd Product name: App Control Smart Kegel Exercise Balls Model(s): Dolp, Dolp I, Dolp II, Dolp III FCC ID: 2AY4X-DOLP Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 6- Report No.: MTi210301002-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 6- Report No.: MTi210301002-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] TEST RESULT CERTIFICATION Applicant’s name .................... : Shenzhen Xuanhuo Tribe Technology Co. Ltd Address .................................. : Room C405-1,Jinluan International Business Building 2, Heping Road, Longhua District, Shenzhen, China Manufacturer's Name ............. : Shenzhen Xiaoteng Keji You Xian Gong Si Address .................................. : Room 1025, Sangtai Building, Shenzhen Da Xue Cheng Chuang Ye Yuan, Lishan Road, Xili Street, Nanshan District, Shenzhen City Factory's Name ...................... : Huizhou Ke Le Mei Da Ke Ji You Xian Gong Si Address .................................. : Floor 3, C Building, Huifeng Xi San Lu, Chenjiang Street, Zhongkai Gaoxin Qu, Huizhou City Product description Product name ........................... : App Control Smart Kegel Exercise Balls Trademark ............................. : Limenamics Model Name .......................... : Dolp Serial Model ............................ Dolp I, Dolp II, Dolp III Standards ............................... : N/A Test procedure ....................... : KDB 447498 D01 v06 Date of Test Date (s) of performance of tests ............. : Mar. 05, 2021 ~Mar. 16, 2021 Test Result .............................................. : Pass This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Testing Engineer : (Danny Xu) Technical Manager : (Leo Su) Authorized Signatory : (Tom Xue) - Page 4 of 6- Report No.: MTi210301002-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Table of Contents 1. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ......................................................................................... 5 2. SAR TEST EXCLUCSION THRESHOLDS ..................................................................................................................... 6 - Page 5 of 6- Report No.: MTi210301002-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] 1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions. a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g…

Text truncated - open the document above for the full version.

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi210301002-01E1 Date of issue: May 11, 2021 Applicant: Shenzhen Xuanhuo Tribe Technology Co. Ltd Product name: App Control Smart Kegel Exercise Balls Model(s): Dolp, Dolp I, Dolp II, Dolp III FCC ID: 2AY4X-DOLP Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 46 - Report No.: MTi210301002-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 46 - Report No.: MTi210301002-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Table of Contents 1. GENERAL INFORMATION ............................................................................................................................... 6 1.1. DESCRIPTION OF EUT ................................................................................................................................................... 6 1.2. OPERATION CHANNEL LIST .............................................................................................................................................. 6 1.3. TEST CHANNEL LIST ....................................................................................................................................................... 7 1.4. ANCILLARY EQUIPMENT LIST ........................................................................................................................................... 7 1.5. DESCRIPTION OF SUPPORT UNITS .................................................................................................................................... 7 2. SUMMARY OF TEST RESULTS ....................................................................................................................... 8 3. TEST FACILITIES AND ACCREDITATIONS .................................................................................................... 9 3.1. TEST LABORATORY ........................................................................................................................................................ 9 3.2. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 9 3.3. MEASUREMENT UNCERTAINTY ........................................................................................................................................ 9 3.4. TEST SOFTWARE ........................................................................................................................................................... 9 4. EQUIPMENT LIST ........................................................................................................................................... 10 5. TEST RESULT ................................................................................................................................................. 11 5.1. ANTENNA REQUIREMENT ............................................................................................................................................. 11 5.1.1 Standard Requirement ...................................................................................................................................... 11 5.1.2 EUT Antenna ..................................................................................................................................................... 11 5.2. PEAK OUTPUT POWER TEST ......................................................................................................................................... 12 5.2.1 Limit .................................................................................................................................................................. 12 5.2.2 Test setup .......................................................................................................................................................... 12 5.2.3 Test Procedure ................................................................................................................................................... 12 5.2.4 Te s t Results ........................................................................................................................................................ 12 5.3. CONDUCTED EMISSION ................................................................................................................................................ 15 5.3.1 Limits ................................................................................................................................................................. 15 5.3.2 Te s t Setup .......................................................................................................................................................... 15 5.3.3 Te s t Procedure ................................................................................................................................................... 16 5.3…

Text truncated - open the document above for the full version.

Model: Dolp Radiated emission Conducted emission