2AYAF-P19Dog training Collar

Charge the Receiver for 3 hours with the cable in package box and take off the battery separator in the Remote Transmitter compartment. Make your dog sit down and fit the Receiver to your dog by leaving one finger space between the collar and your dog’s neck. Turn on the Receiver by pressing and holding the Power Button for 2 seconds. Toggle the Power Button up to turn on the Remote Transmitter. Warning Tone Command: press the Warning Tone Button and the Receiver will delivery warning tone. Press the Level Button to adjust the warning tone levels. Vibration Command: press the Vibration Button and the Receiver will delivery the vibration. Press the Level Button to adjust the Vibration levels. Shock Command: press the Shock Button and the Receiver will delivery the static shock. Press the Level Button to adjust the shock levels. Switch the channels by pressing the Chanel Button. This product is able to train 2 dogs at the same time. Pair the product to an extra Receiver: press the Power Button on the Receiver 3 times till you hear a beeping, then press any one of the Warning Tone, Vibration or Shock Button and the Receiver will respond respectively. Important Safety Information: WARNING Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. • For use with dogs over 6 months of age and over 8 lbs. • DO NOT use when the dog or the collar is/are wet. • DO NOT press and hold shock or vibrate for more than 10 seconds to avoid physical or psychological damage to your dog. • Your dog should not vocalize or panic when receiving stimulation. If this happens, the stimulation level is too high and you need to go back to the previous level and repeat the process. • DO NOT charge the device near any flammable substances. • For dog use only. Not for use on children. • This is not a toy, and should only be operated by responsible adult. CAUTION For on leash training. Do not attach leash to training collar. Use a regular collar in addition to the training collar. Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made too tight on the dog's neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. • Do NOT leave the collar on the dog for more than 12 hours per day. • When possible re-position the collar on the dog's neck every 1 to 2 hours. • Check the fit to prevent excessive pressure; follow the instructions in this manual. • Never connect a lead to the collar; it will cause excessive pressure on the contacts. • Wash the dog's neck area and the contact probes of the collar weekly with a damp cloth. • Examine the contact area daily for signs of a rash or a sore. • If a rash or sore is found, discontinue use of the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian. • Receiver collar meets IP67 water proof rating, it can be submerged into water up to 1 meter for up to 30 minutes. If submerged and wet, please do not use. • This product comes with conductive silicone covers, please ensure they are worn on the contact points before putting the receiver on your dog and check for the presence of the silicone cover every hour. I. Package Content I. Product Overview Remote Transmitter Remote Transmitter Receiver Collar Charging Cable Wrist Lanyard User Manual Test Bulb Tool Metal Prongs Silicone Caps Antenna Warning Tone Button Vibration Button Shock Button Level Button LCD Display Channel Button On/Off Switch Vibration Mode Warning Tone Mode Shock Mode Channels Vibration/Warning Tone/Shock Levels Battery Indicator Receiver How the System Works The Remote Training Collar is easy to use with an advanced digital display that tells you exactly what level of stimulation you are using. The Remote Training Collar assists you in controlling your dog without a leash. At the push of a button, your remote sends a signal activating your dog's Receiver. He receives a safe but annoying stimulation. He'll quickly learn the association between his behavior and your correction; in no time, you'll have a better-behaved dog. The Remote Training Collar has been proven safe, comfortable, and effective for both small and large dog breeds. Using the Remote Training Collar consistently and correctly, any basic obedience commands can be taught and will help to correct many misbehavior that your dog exhibits. II. Setting Up (充电、开机) 1. Charge the Product Remote Transmitter: replace the the Aklaine batteries in remote if the battery indicator blinks on the screen. 展示遥控器更换电池的图片 Receiver: charge the device until the indicator becomes solid green which will take around 2-3 hours. 展示接收器充电的图片 Warning: Please use a charger with 5V output voltage which can always be seen on surface of it. If the Receiver is on charge with charger with voltage over 5V, the Receiver will deliver a warning tone continuously and the charging will be stopped to avoid electrical damage. 2. Turn On/Off the Product Turn on the Remote Transmitter by Toggle the Power Button up to turn on the Remote Speaker Contact Points Charging Jack Indicator Power Button Transmitter. +展示打开遥控器开机按键图片 Turn on the Receiver by pressing and holding the Power Button for 2 seconds. +展示按压接收器电源键的图片 III. Training Modes（功能演示/测试） 1. Warning Tone Mode Press the Warning Tone button and Receiver will deliver a warning tone. It will cut off automatically if you press and hold the Warning Tone button for 10 seconds. There are total 8 levels of Warning Tone for training which you can adjust by the Adjustment button. +操作声音按键的图片+调节按键的图片 2. Vibration Mode Press the Vibration button and Receiver will deliver a vibration. It will cut …

Text truncated - open the document above for the full version.

Shenzhen Smartpet Technology Co., Ltd. Model Difference 2022-02-16 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA RE: LETTER OF MODEL DIFFERENCE EUT NAME: Dog Training Collar FCC ID: 2AYAF-P19 MODEL : P19, RS1, RS2 All the model are the same circuit and RF module, except model names. Regards Sincerely Client’s signature: Client’s name / title : Jia Yaya / engineer Contact information / address: Floor 3, B Building, No. 25, Xingda Road, Egongling Community, Pinghu Street,Longgang District, Shenzhen,Guangdong, China

Shenzhen Smartpet Technology Co., Ltd. 2022.02.16 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Dog Training Collar Trademark: N/A MODEL : P19 FCC ID: 2AYAF-P19 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Jia Yaya / engineer Contact information / address: Floor 3, B Building, No. 25, Xingda Road, Egongling Community, Pinghu Street,Longgang District, Shenzhen,Guangdong, China

Shenzhen Smartpet Technology Co., Ltd. 2022.02.16 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION EUT NAME: Dog Training Collar Trademark: N/A MODEL : P19 FCC ID: 2AYAF-P19 To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Jia Yaya / engineer Contact information / address: Floor 3, B Building, No. 25, Xingda Road, Egongling Community, Pinghu Street,Longgang District, Shenzhen,Guangdong, China

External Photos

Size:25*20mm Dog Training Collar FCC ID: 2AYAF-P19 Label location

Internal Photos Antenna

No.：BCTC/RF-EMC-005 Page: 1 of 30 Edition：A.4 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2201807749E Applicant: Shenzhen Smartpet Technology Co., Ltd. Product Name: Dog Trainning Collar Model/Type Ref.: P19 Tested Date: 2022-01-13 to 2022-01-24 Issued Date: 2022-01-24 Report No.: BCTC2201807749E No.：BCTC/RF-EMC-005 Page: 2 of 30 Edition：A.4 FCC ID: 2AYAF-P19 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Dog Trainning Collar Trademark: N/A Model/Type Ref.: P19 RS1,RS2 Prepared For: Shenzhen Smartpet Technology Co., Ltd. Address: Floor 3, B Building, No. 25, Xingda Road, Egongling Community, Pinghu Street, Longgang District, Shenzhen, Guangdong, China Manufacturer: Shenzhen Smartpet Technology Co., Ltd. Address: Floor 3, B Building, No. 25, Xingda Road, Egongling Community, Pinghu Street, Longgang District, Shenzhen, Guangdong, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2022-01-13 Sample tested Date: 2022-01-13 to 2022-01-24 Issue Date: 2022-01-24 Report No.: BCTC2201807749E Test Standards: FCC Part15.231 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2201807749E No.：BCTC/RF-EMC-005 Page: 3 of 30 Edition：A.4 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Test Setup Configuration ...................................................................................... 7 4.3 Support Equipment ............................................................................................... 7 4.4 Channel List .......................................................................................................... 8 4.5 Test Mode ............................................................................................................. 8 5. Test Facility And Test Instrument Used ................................................................. 9 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 11 6.1 Block Diagram Of Test Setup .............................................................................. 11 6.2 Limit .................................................................................................................... 11 6.3 Test Procedure ................................................................................................... 11 6.4 EUT Operating Conditions .................................................................................. 12 6.5 Test Result .......................................................................................................... 12 7. Radiated Emissions ............................................................................................. 13 7.1 Block Diagram Of Test Setup .............................................................................. 13 7.2 Limit .................................................................................................................... 14 7.3 Test Procedure ................................................................................................... 16 7.4 EUT Operating Conditions .................................................................................. 17 7.5 Test Result .......................................................................................................... 18 8. Bandwidth Test .................................................................................................... 22 8.1 Block Diagram Of Test Setup .............................................................................. 22 8.2 Limit .................................................................................................................... 22 8.3 Test Procedure ................................................................................................... 22 8.4 EUT Operating Conditions .................................................................................. 22 8.5 Test Result .......................................................................................................... 23 9. Calculation Of Average Factor ............................................................................ 24 10. Dwell Time........................................................................................................... 25 10.1 Block Diagram Of Test Setup ............................................................................ 25 10.2 Limit .................................................................................................................. 25 10.3 Test Procedure ................................................................................................. 25 10.4 Test Result ............…

Text truncated - open the document above for the full version.

Report No.: BCTC2201807749E No.：BCTC/RF-EMC-005 Page: 28 of 29 Edition：A.4 13. EUT Test Setup Photographs Radiated Measurement Photos