2AYDO-XB-012Vibration Massage Machine

Common Problems & Solutions: People under these conditions below are not suggested to use the Product Stop using the Product under conditions below Storage and Maintenance Surface cleaning Notice Safety Precautlons S/N 1 2 3 4 5 The Product can not be started Sound like phew or Da-da is heard during working Operate the controller, but the Product no action Sudden stop Can not operation The plug is not in place The red rocker switch is off The fuse is burnt Normal sound generated by the motor or from the abrasion between mechanical units The controller is too far away The battery of controller is out of power from the Product Too many commands sent to the Product and they can not be responded in time Do not use the Product in humid or dusty environment to avoid electric shock or breakdown of the mechanical parts. Do not use the Product when indoor temperature is over 40°C. Do not use the Product in the oper air or under the direct sunlight. Place the Product on flat floor. Warning: Patients with malignant tumor; It is strongly advised to consult your doctor before use. Patients who are under treatment or feel not good; Pregnant women or women in menstrual period; People with heart disease; Osteoporosis patients; People with heart pacemaker or other medical electronic instrument implanted; People with artificial limb; People who are sensitive to vibration and strenuous exercise. 1 2 3 4 Troubleshooting & Safety Precaution Safety Precaution Power Cord and Warning Cleaning and Maintenance Product Display Remote Controller Display Bluetooth Connection Program setting Exercise Posture Reference 5 6 7 7 8 Before cleaning,ensure the power switch is turned off, and the Any accessory is found damaged or exposure of internal component Water or other liquid is accidentally splashed into the Product or controller. . attaching plug is pulled out of the socket. Feeling abnormal or severe pain during using. Power failure. The rubber pedal and covers can be cleaned with a wet cloth containing detergent, and the detergent should be removed with a cloth Do not clean the Product with corrosive detergent such as benzene or thinner,as it may cause fading, corrosion or crack on the Product. Do not splash water into the Product to avoid short circuit. Controller As wet cloth may cause malfunction of the controller, only dry cloth can be used Storage and Maintenance Make sure that the power switch is turned off and the plug is removed from the power supply. Unauthorized dismantle,disassembly or renovation is not allowed to prevent electrical shock or any malfunctions. Please contact manufact- urer If the Product is not in use for a long period, a dust-proof cover (buy it Wipe dust and dirt off the product and keep it clean and away from areas of high temperature or humidity. yourself) should be applied on the Product to prevent the entry of dust or local dealer immediately if there is any service work needed. Plug and power cord Please wait for one hour before using the Product when it is moved from low to high temperature,so as to prevent water vapor from condensing on the Before use, please remove watches, bangles, jewelry, mobile phones, or other valuable items, as well as keys, knives, or other sharp objects, to prevent damage to your belongings or personal injury. Do not smoke while using the Product. Please do not use the Product together with other medical equipments. Please do not use the Product for medical treatment purpose. Do not use the Product right after a meal or drink. During use,please keep child or pet away from the Product.It is forbidden to put fingers or other foreign bodies into the gap between the middle cover and base cover. Supervision is needed for child under 10 years and the aged over 60 years during using of the Product. The maximum load capacity of the Product is 330lbs. The product is intended for use by only one person at any given time Check if the voltage complies with that specified for the Product. Do not retract the power plug with wet hand to prevent electric shock. Hold the plug rather than the power cord to pull out the power cord. Turn off the power switch and remove the plug from the power supply if not in use for a long time. Stop using the product if the power cord has any damage,turn off the power switch,pull out the plug,and contact technicians for repair. . machine and resulting in any failure. 1 TIME ON/OFF Default working time is up Insert the plug Replace with a new fuse Turn on switch of the same mode! No additional treatment is required Replace batteries The effective distance of infrared signal is 2.5M Power off and then restart Restart it after 10 minutes'interval ProblemsCausesSolutions Introduction Package contents Thank you for purchasing the fitness vibration massager machine. The vertical vibration platform enhances your workout by engaging all your stabilizing muscles, helping you relax quickly and get toned fast - Full Body vibration massage machine - Remote control. - Arm Resistance Bands - User's Manual with warranty Information - Power Cord -Pushup Handles A Closer Look (Vibration Platform) Touch Screen Mode 3 Using the Handles 1.Create a deeper workout by using the handles to do push ups. This will allow you to strengthen the biceps and triceps while working out the lower body. 2.Handles are hidden under the sides of the machine. Remove it when needed.Holes in the surface of the machine can be used to adjust the position of the handles. Hidden handle SPEED PROGRAM A Closer Look(Remote)With Music Vibration Massage Machine For Bluetooth speaker Bluetooth set-up 2. Go into the Bluetooth settings page on your smartphone/ tablet. Select "Blue- tooth" under Available devices and the platform will state that it has connected 1. Press the red rocker switch on the front of the platform to power it ON. Then press the On/Off Button on the remote or screen to turn on the plate. successfully. 15 30 35 40 30 20 10 0 50 40 10 40 50 60 80 60 40 20 0 20 60 80 100 …

Text truncated - open the document above for the full version.

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Jin Hua Xing Bu Technology Co., Ltd. Address Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang China FRN 0030263974 Grantee Code 2AYDO FCC ID: 2AYDO-XB-012 Authorized Contact Name Sunny hu Contact Phone 13757936432 Contact Email [email protected] Jin Hua Xing Bu Technology Co., Ltd. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 2025.12.30 Print Name: Sunny hu Title: manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Jinhua Xingbu Technology Co., Ltd. Address Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang China FRN 0030263974 Grantee Code 2AYDO FCC ID: 2AYDO-XB-012 Authorized Contact Name sunny hu Contact Phone 13757936432 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2025.12.30 Print Name: Sunny hu Title: manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date:2025.12.30 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Jinhua Xingbu Technology Co., Ltd. Company Name: tzumi Electronics. FRN: 0030263974 FRN: 0029993763 Grantee Code: 2AYDO Contact Name: Sunny hu Contact Name TZ Gable Address: No 1 XIAJIE VILLAGE,XIAOSHUN TOWN,JINDONG DISTRIC, JINHUA CITY, Zhejiang, P.R. China Address: 16 E 34th 3rd Floor New York, NY 10016 United States City/Province/Zip: Jinhua/ Zhejiang City/Province/Zip: NY, NY 10016 Telephone: 13757936432 Telephone: 646.351.1960 Ext. 4134 Fax: 13757936432 Fax: Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: <2AYDO-XB-012> ATTN: Director of Certification: We, < Jinhua Xingbu Technology Co., Ltd.> and < tzumi Electronics.> understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Jinhua Xingbu Technology Co., Ltd.> and < tzumi Electronics.> acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Sunny hu Name (Printed):TZ Gable Title: manager Title: manager Signature: Signature:

Jin Hua Xing Bu Technology Co., Ltd Current Date : 2025-12-30 To: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (Jin Hua Xing Bu Technology Co., Ltd) HEREBY DECLARED THAT Product Description Vibration Massage Machine Model No. XB-002, XB-002S, XB-007, XB-010, XB-001, XB-003, XB-005 Manufacturer’s Name Jin Hua Xing Bu Technology Co., Ltd Manufacturer’s Address Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Province, China *Except that the model number and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No. (型号): XB-012 Manufacturer’s Name (生产商名称): Jin Hua Xing Bu Technology Co., Ltd Manufacturer’s Address（生产商商地址): Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Province, China Sincerely, Signature (签字): Printed Name (姓名): Sunny hu Position/Title (职位): manager Contact Number (联系电话): 13757936432

Jinhua Xingbu Technology Co., Ltd. Date: 2025/12/30 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AYDO-XB-012 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with << Jinhua Xingbu Technology Co., Ltd >>. This authorization is valid until further written notice from the applicant. Name (Printed):sunny hu Title: manager Signature: On behalf of Company: Jinhua Xingbu Technology Co., Ltd. Telephone:13757936432

Jinhua Xingbu Technology Co., Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Company Name Jinhua Xingbu Technology Co., Ltd. Address Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang China Regarding: Confidentiality Request regarding application for FCC ID: 2AYDO-XB-012 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code) sunny hu Title: manager Company Name: Jinhua Xingbu Technology Co., Ltd.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 External Photos for SHCR2512003302HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4

Page 1 of 1

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 5 Internal Photos for SHCR2512003302HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 5 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 5 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 5 of 5 BT Antenna

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330202 Page: 1 of 10 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2512003302HS FCC ID: 2AYDO-XB-012 Applicant: Jin Hua Xing Bu Technology Co., Ltd Address of Applicant: Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Province, China Manufacturer: Jin Hua Xing Bu Technology Co., Ltd Address of Manufacturer: Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Province, China Factory: Jin Hua Xing Bu Technology Co., Ltd Address of Factory: Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Provinc e, China Equipment Under Test (EUT): EUT Name: Vibration Massage Machine Model No.: XB-012, XB-002, XB-002S, XB-007, XB-010, XB-001, XB-003, XB-005 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-12-15 Date of Test: 2025-12-17 to 2026-01-13 Date of Issue: 2026-01-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330202 Page: 2 of 10 Revision Record Version Description Date Remark 00 Original 2026-01-13 / Authorized for issue by: Tested By Wade Zhang/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330202 Page: 3 of 10 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Details of E.U.T. ......................................................................................................................... 4 3.3 Separation Distance ................................................................................................................... 4 3.4 Test Location .............................................................................................................................. 5 3.5 Test Facility ................................................................................................................................ 5 4 Test Standards and Limits ............................................................................................................... 6 5 FCC Radiofrequency radiation exposure limits ............................................................................ 6 5.1 RF Exposure Test Exemptions for single RF sources ............................................................... 6 5.1.1 Blanket 1 mW Blanket Exemption ...................................................................................... 6 5.1.2 MPE-based Exemption ........................................................................................................ 6 5.1.3 SAR-based Exemption ........................................................................................................ 7 5.2 RF Exposure Test Exemptions for Simultaneous Transmission ................................................ 8 6 Measurement and Calculation ....................................................................................................... 10 6.1 Maximum transmit power ......................................................................................................... 10 6.2 RF Exposure Calculation ......................................................................................................... 10 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330202 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Power supply: AC 110-120V 60Hz Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency …

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.73 -0.84 -0.68 -6.15 -3.70 -2.32 MAX. Gain -0.68 Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.73178 -30.0815 -8.48713 2450 -0.845801 -38.5605 -7.88012 2500 -0.685586 -24.0318 -6.79139 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -6.1530 -24.1420 -13.0295 2450 -3.7054 -26.5836 -10.6700 2500 -2.32122 -30.4301 -9.70536 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330201 Page: 1 of 113 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China TEST REPORT Application No.: SHCR2512003302HS FCC ID: 2AYDO-XB-012 Applicant: Jin Hua Xing Bu Technology Co., Ltd Address of Applicant: Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Province, China Manufacturer: Jin Hua Xing Bu Technology Co., Ltd Address of Manufacturer: Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Province, China Factory: Jin Hua Xing Bu Technology Co., Ltd Address of Factory: Building 1, xiajie village, Xiaoshun Town, Jindong District, Jinhua City, Zhejiang Province, China Equipment Under Test (EUT): EUT Name: Vibration Massage Machine Model No.: XB-012, XB-002, XB-002S, XB-007, XB-010, XB-001, XB-003, XB-005 Remark: Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-12-15 Date of Test: 2025-12-17 to 2026-01-13 Date of Issue: 2026-01-13 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330201 Page: 2 of 113 Revision Record Version Description Date Remark 00 Original 2026-01-13 / Authorized for issue by: Tested By Wade Zhang/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330201 Page: 3 of 113 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth ANSI C63.10 (2020) Section 6.9.2 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation ANSI C63.10 (2020) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number ANSI C63.10 (2020) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time ANSI C63.10 (2020) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 7.8.7.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Emissions at AC Power Line (150kHz-30MHz) ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Note: There are series models mentioned in this report, and they are the similar in electrical and electronic characters. Only the model XB-012 was tested since their differences were the model number and appearance. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR251200330201 Page: 4 of 113 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 7 4.1 Details of…

Text truncated - open the document above for the full version.