2AYE8MIFSPOTE5573S4G MIFSPOT ROUTER

User Manual Manage your device Using the Web Configuration utility Change the network name（SSID），the Security Mode and Key，configure the sleep modem and other settings. 1. Connect your Computer/Smartphone to device over USB or Wi-Fi interface. 2. Enter the URL: 192.168.8.1 in address bar of the browser to open the web configuration page 3. Click on Login button on the middle of web page screen by using “admin” as password to access the homepage of Web Configuration utility. For fast support A user connected access the internet Please check if the user is connected to wifi SSID. Make sure your battery sticker is removed. Make sure your SIM card is properly inserted. Check if your wifi is connected to the network Ensure your sim card is activated and has adequate data balance avaiable. 4G Wifi Router how to set your device through the web configuration page 1. Know your Wifi. The signal light on the left, battery light on the right. If the battery light flashes red, it means your machine needs to be charged. If the signal light flashes green after inserting the card, it means the machine is in normal use. If red, you need to check whether the data of the SIM card is sufficient, or whether the SIM card is inserted in the correct position. 2. How to change SSID name and password. 3. How to know bands 4. How to choose the band you want 5. How to choose 4G only —— Network Settings A. Keep data disconnected B. Choose the Network Settings 6. How to set APN A. First keep the data disconnected B.Then choose setting, find sim card carrier APN and then fill in. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm full interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information: This Device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 10mm separation distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Sincerely, Name/Title： JianChang Hua /Manager Company: ShenZhen MifiData technology Co.,Ltd. Address: 4/F building F, Station Industrial Park, TianBao road,ShiYan Town ,BaoAn District, Shenzhen China Phone: 13851518939 Fax: N/A E-Mail: [email protected]

FCC ID: 2AYE8MIFSPOTE5573S External Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2AYE8MIFSPOTE5573S Photo 4 Photo 5 Photo 6

Label and Location Size: L: 3.0cm*W: 2.0cm Label and Location Model No.: MIFSPOT E5573s-508 FCC ID : 2AYE8MIFSPOTE5573S

FCC ID: 2AYE8MIFSPOTE5573S Internal Photos of the EUT Photo 1 Photo 2 Photo 3 FCC ID: 2AYE8MIFSPOTE5573S Photo 4 Photo 5 Photo 6 2.4G WIFI Internal Antenna WCDMA/LTE PIFA Antenna

Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 1 of 109 Code:AB-RF-05-b FCC SAR Test Report Applicant : ShenZhen MifiData technology Co.,Ltd. Address : 4/F building F, Station Industrial Park,TianBao road,ShiYan Town ,BaoAn District,Shenzhen,China Product Name : 4G MIFSPOT ROUTER Report Date : June 25, 2023 Shenzhen Anbotek Compliance Laboratory Limited Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 2 of 109 Code:AB-RF-05-b Contents 1 Statement of Compliance ............................................................................................... 6 2 General Information ........................................................................................................ 7 2.1 Client Information ............................................................................................................................................. 7 2.2 Description of Equipment Under Test (EUT) ..................................................................................................... 7 2.3 Device Category and SAR Limits ..................................................................................................................... 8 2.4 Applied Standard .............................................................................................................................................. 8 2.5 Environment of Test Site ................................................................................................................................... 8 2.6 Test Configuration ............................................................................................................................................. 8 3 Specific Absorption Rate (SAR) ..................................................................................... 9 3.1 Introduction ....................................................................................................................................................... 9 3.2 SAR Definition .................................................................................................................................................. 9 4 SAR Measurement System .......................................................................................... 10 4.1 E-Field Probe ................................................................................................................................................... 11 4.2 Data Acquisition Electronics (DAE) .................................................................................................................. 11 4.3 Robot .............................................................................................................................................................. 12 4.4 Measurement Server ...................................................................................................................................... 12 4.5 Phantom ......................................................................................................................................................... 13 4.6 Device Holder ................................................................................................................................................. 14 4.7 Data Storage and Evaluation .......................................................................................................................... 14 5 Test Equipment List ...................................................................................................... 17 6 Tissue Simulating Liquids ............................................................................................. 18 7 System Verification Procedures ................................................................................... 20 8 EUT Testing Position .................................................................................................... 22 8.1 Front-of-face and Limbs.................................................................................................................................. 22 9 Measurement Procedures ............................................................................................ 23 9.1 Spatial Peak SAR Evaluation ......................................................................................................................... 23 9.2 Power Reference Measurement ..................................................................................................................... 24 9.3 Area Scan Procedures ................................................................................................................................... 24 9.4 Zoom Scan Procedures .................................................................................................................................. 24 9.5 Volume Scan Procedures ............................................................................................................................... 25 9.6 Power Drift Monitoring .................................................................................................................................... 25 10 TEST CONDITIONS AND RESULTS ........................................................................... 26 10.1 Conducted Power Results .............................................................................................................................. 26 10.2 Transmit Antennas and SAR Measurement Position ...................................................................................... 39 10.3 Standalone SAR Test Exclusion Considerations ............................................................................................ 40 10.4 Estimated SAR ............................................................................................................................................... 40 10.5 SAR Test Results Summary ...................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 66 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 67 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 68 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 69 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 70 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 71 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 72 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 73 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 74 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 75 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 76 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 77 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 78 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 79 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 80 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 81 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 82 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 83 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 84 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 85 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 86 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 87 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 88 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 89 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 90 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 91 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 92 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 93 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 94 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 95 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 96 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 97 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 98 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 99 of 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 100 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 101 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 102 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 103 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 104 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 105 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 106 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 107 o f 109 Code:AB-RF-05-b Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 108 o f 109 Code:AB-RF-05-b Extended calibration intervals check for Dipoles Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dBm, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of Extended Calibration SAR Dipole D835V2– serial no. 4d154 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2021-06-16 -29.789 / 49.186 / -3.11 / 2022-06-15 -30.06 0.90% 48.496 -0.69 -3.03 -0.08 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2021-06-16 -27.407 / 46.601 / -2.33 / 2022-06-15 -27.43 0.10% 46.301 -0.3 -1.81 -0.52 Justification of Extended Calibration SAR Dipole D1750V2– serial no.1021 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2021-07-01 -33.945 / 48.596 / -1.40 / 2022-06-30 -34.05 0.30% 48.196 -0.4 -0.68 -0.72 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2021-07-01 -27.463 / 45.981 / 0.61 / 2022-06-30 -27.55 0.30% 45.901 -0.08 1.29 -0.68 Report No.: 18220WC30122401 FCC ID: 2AYE8MIFSPOTE5573S Page 109 o f 109 Code:AB-RF-05-b Justification of Extended Calibration SAR Dipole D2450V2– serial no.910 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2021-06-15 -25.815 / 54.583 / 2.77 / 2022-06-14 -25.63 -0.70% 53.823 -0.76 3.15 -0.38 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2021-06-15 -27.332 / 50.671 / 4.28 / 2022-06-14 -27.09 -0.90% 49.991 -0.68 4.85 -0.57 Justification of Extended Calibration SAR Dipole D2600V2– serial no. 1058 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2021-06-19 -23.998 / 50.52 / -6.34 / 2022-06-17 -23.66 -1.40% 50.08 -0.44 -5.76 -0.58 Body Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type Internal antenna Model MIFSPOT E5573s-508 Frequency range 2400-2500MHz Manufacturer ShenZhen MifiData technology Co.,Ltd. ANT Peak Gain 0.35 dBi 2. Antenna Photo: Length :28.11mm Width: 2.65mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID............................................. : CTA23060501201 2AYE8MIFSPOTE5573S Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Amy Wen Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Jun. 15, 2023 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : ShenZhen MifiData technology Co.,Ltd. Address ............................................ : 4/F building F, Station Industrial Park,TianBao road,ShiYan Town , BaoAn District,Shenzhen,China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator .................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : 4G MIFSPOT ROUTER Trade Mark ....................................... : N/A Manufacturer .................................... : ShenZhen MifiData technology Co.,Ltd. Model/Type reference ...................... : MIFSPOT E5573s-508 Listed Models .................................. : E5573s-508, E5573s-509, B535, B525, B612, E5785 Modulation Type ............................... : CCK/DSSS/ OFDM Operation Frequency ........................ : From 2412 - 2462MHz Rating ............................................... : DC 3.8V From Battery and DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA23060501201 Page 2 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : 4G MIFSPOT ROUTER Model /Type : MIFSPOT E5573s-508 Series Model No. E5573s-508, E5573s-509, B535, B525, B612, E5785 Applicant : ShenZhen MifiData technology Co.,Ltd. Address : 4/F building F, Station Industrial Park,TianBao road,ShiYan Town ,BaoAn District,Shenzhen,China Manufacturer : ShenZhen MifiData technology Co.,Ltd. Address : 4/F building F, Station Industrial Park,TianBao road,ShiYan Town ,BaoAn District,Shenzhen,China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA23060501201 Page 3 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 13 4.3 Maximum Peak Conducted Output Power 19 4.4 Power Spectral Density 20 4.5 6dB Bandwidth 23 4.6 Out-of-band Emissions 26 4.7 Antenna Requirement 35 5 T E S T S E TUP P H O T O S O F T H E E U T ......................................... 36 6 P H O T O S O F T H E E U T ........................................................... 37 Report No.: CTA23060501201 Page 4 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digital Transmission Systems (DTS) ,Frequency Hopping Spread Spectrum System(HFSS), and Hybrid System Devices Operating Under §15.247 of The FCC rules. Report No.…

Text truncated - open the document above for the full version.

Report No.: CTA23060501201 Page 28 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11b 802.11g Reference Reference CH011 CH01 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA23060501201 Page 29 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11g Reference Reference CH06 CH11 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA23060501201 Page 30 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference Reference CH01 CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA23060501201 Page 31 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 802.11n40 Reference Reference CH11 CH03 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA23060501201 Page 32 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n40 Reference Reference CH06 CH09 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA23060501201 Page 33 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Band-edge Measurements for RF Conducted Emissions: 802.11b Left bandedge Right bandedge 802.11g Left bandedge Right bandedge Report No.: CTA23060501201 Page 34 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n(HT20) Left bandedge Right bandedge 802.11n(HT40) Left bandedge Right bandedge Report No.: CTA23060501201 Page 35 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.7 Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited FCC CFR Title 47 Part 15 Subpart C Section 15.247(c) (1) (I): (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. Test Result: The maximum gain of antenna was 0.35 dBi. Remark:The antenna gain is provided by the customer , if the data provided by the customer is not accurate, Shenzhen CTA Testing Technology Co., Ltd. does not assume any responsibility. Report No.: CTA23060501201 Page 36 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 5 T e s t S e t u p P h o t o s o f t h e E U T Report No.: CTA23060501201 Page 37 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 6 P h o t o s o f t h e E U T Report No.: CTA23060501201 Page 38 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA23060501201 Page 39 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA23060501201 Page 40 of 40 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn ********************** End of Report **********************

FCC ID: 2AYE8MIFSPOTE5573S Test Setup Photos of the EUT