2AYEZ-TE850Smart LTE Terminal

TE850 Quick Start Guide Thanks for choosing our product! This Quick Start Guide only applicable to: TE850. Before using the product, please read the Quick Start Guide to fully benefit from it. Notice: Always use original batteries and chargers. The warranty does not cover damage caused by non-original batteries and/or chargers. Connect the handheld and travel charger using the USB Cable. Red light on the handheld indicates battery charging in progress. Green lights on indicates fully charged. Charging USB Cable To USB Travel Charger To Device USB Port Caution Avoid using any chemical agent including detergent, alcohol, aerosol spray or oil preparations as cleaning solution. Please power off and remove the battery before cleaning the device. Do not use the charger/USB port for charging, data transmission, etc. until the phone is completely dry. Do not store the device in environments with electronically corrosive materials. Using dry and clean lint-free cloth or hairbrush to keep the device and charger docking port clean. Dry your device completely after cleaning and before using it again. Although your device is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting or bending, or sitting on it. Make sure the charger/USB port, MicroSD card/SIM card slot covers are properly seated, with no foreign objects obstructing the seals. ● ● ● ● ● ● ● ● Device Status Low battery Charging Fully charged Red light (blinking) Red light (constant) Green light (constant) Indicator Status SOS Button Fingerprint Power Button Volume Buttons Channel Switch Radio Grade Audio Port Charging pin USB Type-C port Front Camera Rear Camera Battery Cover Lock Switch Battery Cover Notice: Please check the above accessories before you discard the packing material. Please contact your local dealer immediately if there is any missing or damage parts. 3. Press and hold the power button until he screen lights up to turn on the device. Press the power button to put the device screen to sleep, press again to wake it up. 2. Insert the battery to the device, then put the battery cover on and lock. 1.Insert the SIM/MicroSD Card into its slot This product involves constant upgrading and/or improvement, our company reserves the right to change the specifications of software and/or hardware mentioned in this operating guide without any prior notice. The product specifications and infor- mation mentioned in the operating guide are for reference only. Warranty period is 1 year from date of purchase. Notice Check list Before Use TE850×1Battery×1 SIM Card2/MicroSD Card SIM Card1 Belt Clip×1 Travel Charger×1USB-C cable×1 Quick Start Guide×1 Programmable Buttons FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to user. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to resolve the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) Informati on: This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scienti fic organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Informati on and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations when the device used at 10mm from the product, compliance with FCC RF exposure requirements. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. CE Warning 1. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 2. The product shall only be connected to a USB interface of version USB 2.0 or higher. 3. Adapter shall be installed near the equipment and shall be easily accessible. 4. operating temperature shall not exceed 60 °C and shall not be lower than -25 °C. 5. The plug serves as the disconnect device for the adapter. 6. The device complies with RF specifications when the device used at 5mm from the body without belt-clips, 0mm from the body with the belt-clips, 25mm from the face. 7. The band 5150–5350 MHz indoor use only. Hereby, Telo Communication (Shenzhen) Co., Ltd declares that this Mobile phone product is in compliance with essential requ…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Telo Communication (Shenzhen) Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-09-03 FCC ID: 2AYEZ-TE850 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Telo Communication (Shenzhen) Co., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Telo Communication (Shenzhen) Co., Ltd. certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Telo Communication (Shenzhen) Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant: Telo Communication (Shenzhen) Co., Ltd. Address: 13th Floor, Building B, Union R&D Center, No. 381 Guangshen Road, Bao’an District, Shenzhen, China Contact Person: Frank Shao Tel.: +86 755 86950766 Email: [email protected] Sincerely, Signature:

Attestation Statements Date: 2026-09-03 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for(FCC ID: 2AYEZ-TE850) Telo Communication (Shenzhen) Co., Ltd., the undersigned, hereby authorize HOPEK CORPORATION INC to act as our designated agent for service of process, Telo Communication (Shenzhen) Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. HOPEK CORPORATION INC accepts the responsibility to act as designated agent for service of process. Applicant Information： Company name: Telo Communication (Shenzhen) Co., Ltd. Contact Name: Frank Shao Address: 13th Floor, Building B, Union R&D Center, No. 381 Guangshen Road, Bao’an District, Shenzhen, China Telephone No: +86 755 86950766 Email: [email protected] FRN: 0030274690 Signature: Frank Shao Agent Information: Company Name: HOPEK CORPORATION INC Address:16755 Coyote Bush Dr Unit 84, San Diego, CA 92127 United States FRN: 0034562900 Contact Name: Yangyang Xu Telephone No: 561-875-9826 Email: [email protected] Signature: Yangyang Xu

Telo Communication (Shenzhen) Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 3, 2026 Subject; Request for Confidentiality FCC ID: 2AYEZ-TE850 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Frank Shao Title: Product Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Telo Communication (Shenzhen) Co., Ltd. Date：2026-09-03 Product Model Number: TE850, TE850A, TE850B, TE850C, TE850D, TE850E, TE850P FCC ID：2AYEZ-TE850 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature: By: Frank Shao Contact Listed on FCC Wesbite Title: Product Manager Email: [email protected] On behalf of: Telo Communication (Shenzhen) Co., Ltd.

Telo Communication (Shenzhen) Co., Ltd. Declaration Letter of Model Difference Date: 2026-09-03 FCC ID: 2AYEZ-TE850 Tested Model Number: TE850, Adding Model Number(s): TE850A, TE850B, TE850C, TE850D, TE850E, TE850P The internal structure is identical; colors may vary based on customers’ customization requirements, and model numbers will be changed according to customers’ customization demands. Yours Sincerely, Applicant: Telo Communication (Shenzhen) Co., Ltd. Address: 13th Floor, Building B, Union R&D Center, No. 381 Guangshen Road, Bao’an District, Shenzhen, China Contact Person: Frank Shao Tel.: +86 755 86950766 Email: [email protected] Sincerely, Signature:

Page 1 of 5 Report No.: LGT26H086 Appendix - External Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 5 Report No.: LGT26H086 Appendix - External Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 5 Report No.: LGT26H086 Appendix - External Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 5 Report No.: LGT26H086 Appendix - External Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 5 Report No.: LGT26H086 Appendix - External Photographs of EUT Constructional Details Photo 9 Photo 10

Label Size: 40*35mm This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Page 1 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 11 Photo 12 Page 7 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 13 Photo 14 Page 8 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 15 Photo 16 DIV ANT Page 9 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 17 Photo 18 NFC ANT Page 10 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 19 Photo 20 Page 11 of 11 Report No.: LGT26H086 Appendix - Internal Photographs of EUT Constructional Details Photo 21 MAIN ANT GPS/Wi-Fi/BT ANT

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 172 SAR TEST REPORT Product Name: Smart LTE Terminal Model Number: TE850, TE850A, TE850B, TE850C, TE850D, TE850E, TE850P FCC ID: 2AYEZ-TE850 Issued For : Telo Communication (Shenzhen) Co., Ltd. 13th Floor, Building B, Union R&D Center, No. 381 Guangshen Road, Bao'an District, Shenzhen, China Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT26H086HA01 Sample Received Date: Aug. 11, 2026 Date of Test Aug. 11, 2026 ~ Aug. 31, 2026 Date of Issue Aug. 31, 2026 Max. SAR (1g) Head: 0.979 W/kg Body: 1.082 W/kg Report No.: LGT26H086HA01 Page 2 of 172 Table of Contents 1. General Information 5 1.1 EUT Description 5 1.2 Test Environment 7 1.3 Test Factory 7 2. Test Standards and Limits 8 3. SAR Measurement System 9 3.1 Definition of Specific Absorption Rate (SAR) 9 3.2 SAR System 9 4. Tissue Simulating Liquids 12 4.1 Simulating Liquids Parameter Check 12 5. SAR System Validation 14 5.1 Validation System 14 5.2 Validation Result 15 6. SAR Evaluation Procedures 16 7. EUT Antenna Location Sketch 17 7.1 SAR test exclusion consider table 18 8. EUT Test Position 24 8.1 Define Two Imaginary Lines on the Handset 24 8.2 Hotspot mode exposure position condition 25 9. Uncertainty 26 9.1 Measurement Uncertainty 26 9.2 System validation Uncertainty 27 10. Conducted Power Measurement 28 10.1 Test Result 28 10.2 Tune up 66 11. EUT and Test Setup Photo 71 11.1 EUT Photos 71 11.2 Setup Photos 74 12. SAR Result Summary 80 12.1 Head SAR 80 12.2 Body-worn and Hotspot SAR 84 12.3 Repeated SAR 90 12.4 Repeated SAR measurement 92 12.5 Simultaneous Multi-band Transmission Evaluation 94 13. Equipment List 97 Report No.: LGT26H086HA01 Page 3 of 172 Appendix A. System Validation Plots 98 Appendix B. SAR Test Plots 124 Appendix C. Probe Calibration and Dipole Calibration Report 172 Revision History Rev. Issue Date Contents 00 Aug. 31, 2026 Initial Issue Report No.: LGT26H086HA01 Page 4 of 172 TEST REPORT CERTIFICATION Applicant Telo Communication (Shenzhen) Co., Ltd. Address 13th Floor, Building B, Union R&D Center, No. 381 Guangshen Road, Bao'an District, Shenzhen, China Manufacture Telo Communication (Shenzhen) Co., Ltd. Address 13th Floor, Building B, Union R&D Center, No. 381 Guangshen Road, Bao'an District, Shenzhen, China Product Name Smart LTE Terminal Trademark TELOX Model Number TE850, TE850A, TE850B, TE850C, TE850D, TE850E, TE850P Sample number LGT2608121-3 APPLICABLE STANDARDS STANDARD TEST RESULTS ANSI/IEEE Std. C95.1-2019 FCC 47 CFR Part 2 (2.1093) IEEE 1528: 2013 PASS Prepared by: Approved by: Deng Deng Engineer Vita Li Manager Report No.: LGT26H086HA01 Page 5 of 172 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name Smart LTE Terminal Test Model Number TE850 Series Number TE850, TE850A, TE850B, TE850C, TE850D, TE850E, TE850P Model Difference The internal structure is identical; colors may vary based on customers' customization requirements, and model numbers will be changed according to customers' customization demands. Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled Hardware Version DVT Software Version TE850_ROW_V1P_260815 Frequency Range GSM GSM 850 824~849 MHz PCS 1900 1850~1910 MHz WCDMA Band II 1850~1910 MHz Band IV 1710~1755 MHz Band V 824~849 MHz LTE Band 2 1850~1910MHz Band 4 1710~1755MHz Band 5 824~849MHz Band 7 2500~2570MHz Band 12 699~716MHz Band 13 777~787MHz Band 14 788~798MHz Band 17 704 ~ 716MHz Band 25 1850~1915MHz Band 26 814~824MHz; 824-849MHz Band 38 2570~2620MHz Band 40 2305~2315MHz; 2350-2360MHz Band 41 2496~2690MHz Band 66 1710~1780MHz WLAN 2412~2462 MHz 5150~5250 MHz 5250~5350 MHz 5470~5725 MHz 5725~5850 MHz Bluetooth 2402~2480 MHz NFC 13.56MHz Report No.: LGT26H086HA01 Page 6 of 172 Max. Reported SAR(1g): (Limit:1.6W/kg) Mode Head (W/ kg) Body Worn and Hotspot (W/ kg) GSM 850 0.791 0.995 PCS 1900 0.283 0.791 WCDMA Band II 0.349 0.752 WCDMA Band IV 0.438 0.946 WCDMA Band V 0.979 0.933 LTE Band 2 0.705 0.959 LTE Band 4 0.607 0.7 LTE Band 5 0.944 1.03 LTE Band 7 0.975 0.619 LTE Band 12 0.725 1.036 LTE Band 13 0.933 1.054 LTE Band 14 0.832 1.082 LTE Band 17 0.726 0.78 LTE Band 25 0.555 0.904 LTE Band 26 0.941 0.902 LTE Band 38 0.213 0.79 LTE Band 40 0.32 0.738 LTE Band 41 0.254 0.679 LTE Band 66 0.628 0.656 2.4G WLAN 0.102 0.1 5.2G WLAN 0.077 0.106 5.3G WLAN 0.056 0.101 5.6G WLAN 0.124 0.034 5.8G WLAN 0.066 0.147 Bluetooth Note 0.083 0.083 NFC NOTE4 0.000002 0.000002 1-g Sum SAR 1.103 1.229 Test distance 0mm 10mm Battery Capacity: 5100mAh Rated Voltage: 3.85V Operating Mode GSM: GSM Voice; GPRS/EGPRS Class 12 WCDMA: RMC, HSDPA, HSUPA Release 6 LTE: QPSK, 16QAM 2.4G WLAN: 802.11b(DSSS): CCK, DQPSK, DBPSK 802.11g(OFDM): BPSK, QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK, QPSK,16-QAM,64-QAM 5G WLAN: 802.11a(OFDM): BPSK, QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK, QPSK,16-QAM,64-QAM 802.11ac (OFDM): BPSK, QPSK,16-QAM,64-QAM,256-QAM Bluetooth: GFSK +π/4DQPSK+8DPSK BLE: GFSK NFC: FSK Antenna Specification GSM/WCDMA/CDMA/LTE/NR: FPC Antenna Bluetooth: FPC Antenna WLAN: FPC Antenna NFC: Coi…

Text truncated - open the document above for the full version.

Report No.: LGT26H086HA01 Page 69 of 172 BW[MHz] RB Size Mode Band 2 Band 4 Band 7 Band 25 Band 38 Band 41 Band 66 20 1 LOW QPSK 23.7±1dBm 20.9±1dBm 20.8±1dBm 21.6±1dBm 22.6±1dBm 22.8±1dBm 23.1±1dBm 20 1 MID 23.4±1dBm 21.2±1dBm 20.2±1dBm 21.3±1dBm 23.3±1dBm 23.0±1dBm 23.3±1dBm 20 1 HIGH 23.5±1dBm 21.2±1dBm 20.3±1dBm 21.3±1dBm 23.7±1dBm 23.8±1dBm 23.3±1dBm 20 50 LOW 22.6±1dBm 19.9±1dBm 19.7±1dBm 20.5±1dBm 22.3±1dBm 22.7±1dBm 22.0±1dBm 20 50 MID 22.4±1dBm 20.1±1dBm 19.2±1dBm 20.3±1dBm 23.0±1dBm 22.7±1dBm 22.2±1dBm 20 50 HIGH 22.5±1dBm 20.1±1dBm 19.2±1dBm 20.0±1dBm 23.2±1dBm 23.2±1dBm 22.2±1dBm 20 100 LOW 22.6±1dBm 19.9±1dBm 19.6±1dBm 20.5±1dBm 22.4±1dBm 22.6±1dBm 22.0±1dBm 20 100 MID 22.4±1dBm 20.1±1dBm 19.2±1dBm 20.3±1dBm 23.0±1dBm 22.8±1dBm 22.2±1dBm 20 100 HIGH 22.4±1dBm 20.1±1dBm 19.2±1dBm 20.0±1dBm 23.2±1dBm 23.2±1dBm 22.2±1dBm 20 1 LOW 16- QAM 23.0±1dBm 20.4±1dBm 20.0±1dBm 20.8±1dBm 22.7±1dBm 22.8±1dBm 22.6±1dBm 20 1 MID 22.7±1dBm 20.6±1dBm 19.6±1dBm 20.6±1dBm 23.5±1dBm 22.9±1dBm 21.5±1dBm 20 1 HIGH 22.9±1dBm 20.5±1dBm 19.4±1dBm 20.7±1dBm 23.5±1dBm 23.5±1dBm 22.5±1dBm 20 50 LOW 21.5±1dBm 19.0±1dBm 18.8±1dBm 19.3±1dBm 22.4±1dBm 23.1±1dBm 22.6±1dBm 20 50 MID 21.4±1dBm 19.2±1dBm 18.3±1dBm 19.5±1dBm 22.9±1dBm 23.1±1dBm 22.5±1dBm 20 50 HIGH 21.6±1dBm 19.1±1dBm 18.2±1dBm 19.2±1dBm 23.3±1dBm 23.5±1dBm 22.5±1dBm 20 100 LOW 21.5±1dBm 19.0±1dBm 18.7±1dBm 19.4±1dBm 22.5±1dBm 22.7±1dBm 21.0±1dBm 20 100 MID 21.5±1dBm 19.1±1dBm 18.2±1dBm 19.3±1dBm 23.0±1dBm 22.8±1dBm 20.9±1dBm 20 100 HIGH 21.5±1dBm 19.2±1dBm 18.1±1dBm 19.3±1dBm 23.2±1dBm 23.2±1dBm 21.2±1dBm BW[MHz] RB Size Mode Band 5 Band 12 Band 13 Band 14 Band 17 Band 26 Band 40 Band 40 10 1 LOW QPSK 23.3±1dBm 23.5±1dBm / / 23.5±1dBm 23.3±1dBm / / 10 1 MID 23.3±1dBm 23.3±1dBm 23.3±1dBm 23.5±1dBm 23.3±1dBm 23.5±1dBm 13.8±1dBm 13.9±1dBm 10 1 HIGH 23.6±1dBm 23.2±1dBm / / 23.1±1dBm 23.5±1dBm / / 10 25 LOW 22.3±1dBm 22.3±1dBm / / 2.3±1dBm 22.6±1dBm / / 10 25 MID 22.4±1dBm 22.3±1dBm 22.2±1dBm 22.3±1dBm 22.3±1dBm 22.5±1dBm 13.1±1dBm 13.2±1dBm 10 25 HIGH 22.6±1dBm 22.2±1dBm / / 22.2±1dBm 22.5±1dBm / / 10 50 LOW 22.4±1dBm 22.3±1dBm / / 22.3±1dBm 22.6±1dBm / / 10 50 MID 22.4±1dBm 22.3±1dBm 22.2±1dBm 22.3±1dBm 22.3±1dBm 22.5±1dBm 13.0±1dBm 13.2±1dBm 10 50 HIGH 22.6±1dBm 22.2±1dBm / / 22.2±1dBm 22.5±1dBm / / 10 1 LOW 16- QAM 22.8±1dBm 22.3±1dBm / / 22.7±1dBm 22.7±1dBm / / 10 1 MID 22.5±1dBm 22.7±1dBm 22.8±1dBm 23.0±1dBm 22.5±1dBm 22.3±1dBm 13.7±1dBm 13.5±1dBm 10 1 HIGH 22.4±1dBm 22.5±1dBm / / 22.1±1dBm 22.9±1dBm / / 10 25 LOW 21.3±1dBm 21.3±1dBm / / 21.3±1dBm 21.4±1dBm / / 10 25 MID 21.4±1dBm 21.3±1dBm 21.3±1dBm 21.3±1dBm 21.3±1dBm 21.3±1dBm 13.1±1dBm 13.2±1dBm 10 25 HIGH 21.5±1dBm 21.3±1dBm / / 21.3±1dBm 21.5±1dBm / / 10 50 LOW 21.3±1dBm 21.3±1dBm / / 21.3±1dBm 21.5±1dBm / / 10 50 MID 21.4±1dBm 21.3±1dBm 21.2±1dBm 21.3±1dBm 21.3±1dBm 21.3±1dBm 13.1±1dBm 13.2±1dBm 10 50 HIGH 21.5±1dBm 21.3±1dBm / / 21.2±1dBm 21.5±1dBm / / Report No.: LGT26H086HA01 Page 70 of 172 BW[MHz] RB Size Mode Band 26 15 1 LOW QPSK 23.3±1dBm 15 1 MID 23.5±1dBm 15 1 HIGH 23.6±1dBm 15 36 LOW 22.4±1dBm 15 36 MID 22.5±1dBm 15 36 HIGH 22.5±1dBm 15 75 LOW 22.4±1dBm 15 75 MID 22.4±1dBm 15 75 HIGH 22.5±1dBm 15 1 LOW 16- QAM 22.8±1dBm 15 1 MID 22.6±1dBm 15 1 HIGH 22.5±1dBm 15 36 LOW 21.4±1dBm 15 36 MID 21.5±1dBm 15 36 HIGH 21.5±1dBm 15 75 LOW 21.4±1dBm 15 75 MID 21.4±1dBm 15 75 HIGH 21.5±1dBm Report No.: LGT26H086HA01 Page 71 of 172 11. EUT and Test Setup Photo 11.1 EUT Photos Front side Back side Report No.: LGT26H086HA01 Page 72 of 172 Right Edge Left Edge Report No.: LGT26H086HA01 Page 73 of 172 Top Edge Bottom Edge Report No.: LGT26H086HA01 Page 74 of 172 11.2 Setup Photos Right Touch Right Tilt Report No.: LGT26H086HA01 Page 75 of 172 Left Touch Left Tilt Report No.: LGT26H086HA01 Page 76 of 172 Body Front side (separation distance is 10mm) Body Back side (separation distance10mm) Report No.: LGT26H086HA01 Page 77 of 172 Body Left side (separation distance is 10mm) Body Right side (separation distance is 10mm) Report No.: LGT26H086HA01 Page 78 of 172 Body Top side (separation distance is 10mm) Body Bottom side (separation distance is 10mm) Report No.: LGT26H086HA01 Page 79 of 172 Liquid depth (15 cm) Liquid depth (15 cm) Report No.: LGT26H086HA01 Page 80 of 172 12. SAR Result Summary 12.1 Head SAR Band Model Test Position Freq. SAR (1g) (W/kg) Power Drift (%) Max. Turn-up Power (dBm) Meas. Output Power (dBm) Scaling Factor Scaled SAR (W/Kg) Meas. No. GSM850 GSM Right Cheek 824.2 0.771 -2.34 29.70 29.59 1.026 0.791 1 Right Tilt 824.2 0.697 -1.59 29.70 29.59 1.026 0.715 / Left Cheek 824.2 0.587 0.28 29.70 29.59 1.026 0.602 / Left Tilt 824.2 0.532 -0.01 29.70 29.59 1.026 0.546 / PCS 1900 GSM Right Cheek 1850.2 0.261 -0.07 27.60 27.25 1.084 0.283 3 Right Tilt 1850.2 0.24 3.56 27.60 27.25 1.084 0.260 / Left Cheek 1850.2 0.202 -3.67 27.60 27.25 1.084 0.219 / Left Tilt 1850.2 0.185 -3.59 27.60 27.25 1.084 0.201 / WCDMA Band II RMC Right Cheek 1852.4 0.328 2.05 25.60 25.33 1.064 0.349 5 Right Tilt 1852.4 0.301 1.54 25.60 25.33 1.064 0.320 / Left Cheek 1852.4 0.208 0.67 25.60 25.33 1.064 0.221 / Left Tilt 1852.4 0.19 -0.99 25.60 25.33 1.064 0.202 / WCDMA Band IV RMC Right Cheek 1740 0.413 -3.31 25.40 25.14 1.062 0.438 7 Right Tilt 1740 0.375 -2.55 25.40 25.14 1.062 0.398 / Left Cheek 1740 0.315 -1.24 25.40 25.14 1.062 0.334 / Left Tilt 1740 0.288 1.42 25.40 25.14 1.062 0.306 / WCDMA Band V RMC Right Cheek 826.4 0.861 -0.94 25.30 24.98 1.076 0.927 / Right Cheek 836.4 0.874 2.64 25.30 25.03 1.064 0.930 / Right Cheek 846.6 0.914 0.20 25.50 25.20 1.072 0.979 9 Right Tilt 846.6 0.736 -0.07 25.50 25.20 1.072 0.789 / Left Cheek 846.6 0.700 -3.95 25.50 25.20 1.072 0.750 / Left Tilt 846.6 0.63 -0.46 25.50 25.20 1.072 0.675 / 2.4G WLAN 802.11b Right Cheek 2437 0.095 -3.30 16.00 15.68 1.076 0.102 11 Right Tilt 2437 0.09 -3.34 16.00 15.68 1.076 0.097 / Left Cheek 2437 0.070 -2.45 16.00 15.68 1.076 0.075 / Left Tilt 2437 0.065 -2.67 16.00 15.68 1.076 0.070 / 5.2G WLAN 802.11a Right Cheek 5240 0.071 3.14 17.20…

Text truncated - open the document above for the full version.

Report No.: LGT26H086HA01 Page 118 of 172 System Performance Check Data (5400MHz) Type: Phone measurement (Complete) Area scan resolution: dx=8mm, dy=8mm Zoom scan resolution: dx=4mm, dy=4mm, dz=2mm Date of measurement:2026-08-24 Experimental conditions. Phantom Validation plane Device Position Dipole Band CW5400 Channels Middle Signal CW Frequency (MHz) 5400.000 Relative permittivity 35.77 Conductivity (S/m) 4.91 Probe 0326-EPGO-431 ConvF 1.16 Crest factor: 1:1 SURFACE VOLUME SAR Maximum location: X=2.00, Y=-1.00 ; SAR Peak: 21.70 W/kg SAR 10g (W/Kg) 2.264 SAR 1g (W/Kg) 7.642 Report No.: LGT26H086HA01 Page 119 of 172 Z Axis Scan Report No.: LGT26H086HA01 Page 120 of 172 System Performance Check Data (5600MHz) Type: Phone measurement (Complete) Area scan resolution: dx=8mm, dy=8mm Zoom scan resolution: dx=4mm, dy=4mm, dz=2mm Date of measurement:2026-08-24 Experimental conditions. Phantom Validation plane Device Position Dipole Band CW5600 Channels Middle Signal CW Frequency (MHz) 5600.000 Relative permittivity 36.71 Conductivity (S/m) 5.10 Probe 0326-EPGO-431 ConvF 1.07 Crest factor: 1:1 SURFACE VOLUME SAR Maximum location: X=2.00, Y=0.00 ; SAR Peak: 25.34 W/kg SAR 10g (W/Kg) 2.356 SAR 1g (W/Kg) 8.244 Report No.: LGT26H086HA01 Page 121 of 172 Z Axis Scan Report No.: LGT26H086HA01 Page 122 of 172 System Performance Check Data (5800MHz) Type: Phone measurement (Complete) Area scan resolution: dx=8mm, dy=8mm Zoom scan resolution: dx=4mm, dy=4mm, dz=2mm Date of measurement:2026-08-12 Experimental conditions. Phantom Validation plane Device Position Dipole Band CW5800 Channels Middle Signal CW Frequency (MHz) 5800.000 Relative permittivity 35.93 Conductivity (S/m) 5.30 Probe 0326-EPGO-431 ConvF 1.19 Crest factor: 1:1 SURFACE VOLUME SAR Maximum location: X=2.00, Y=-1.00 ; SAR Peak: 26.68 W/kg SAR 10g (W/Kg) 2.377 SAR 1g (W/Kg) 8.063 Report No.: LGT26H086HA01 Page 123 of 172 Z Axis Scan Report No.: LGT26H086HA01 Page 124 of 172 Appendix B. SAR Test Plots Plot 1: Test Date 2026-08-18 Area Scan dx=8mm dy=8mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band GPRS850 Signal TDMA (GPRS) Frequency 824.2 SAR 10g (W/Kg) 0.573 SAR 1g (W/Kg) 0.771 ConvF 0.690 Relative permittivity 41.69 Conductivity (S/m) 0.89 Maximum location: X=-34.00, Y=-17.00 ; SAR Peak: 0.98 W/kg SURFACE SAR VOLUME SAR 3D screen shot Hot spot position Report No.: LGT26H086HA01 Page 125 of 172 Plot 2: Test Date 2026-08-18 Area Scan dx=8mm dy=8mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Back Side Band GPRS850 Signal TDMA (GPRS) Frequency 836.6 SAR 10g (W/Kg) 0.668 SAR 1g (W/Kg) 0.924 ConvF 0.690 Relative permittivity 41.69 Conductivity (S/m) 0.89 Maximum location: X=-5.00, Y=26.00 ; SAR Peak: 1.25 W/kg SURFACE SAR VOLUME SAR 3D screen shot Hot spot position Report No.: LGT26H086HA01 Page 126 of 172 Plot 3: Test Date 2026-08-16 Area Scan dx=8mm dy=8mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Right head Device Position Cheek Band GPRS1900 Signal TDMA (GPRS) Frequency 1850.2 SAR 10g (W/Kg) 0.128 SAR 1g (W/Kg) 0.261 ConvF 0.90 Relative permittivity 41.05 Conductivity (S/m) 1.37 Maximum location: X=-55.00, Y=-62.00 ; SAR Peak: 0.45 W/kg SURFACE SAR VOLUME SAR 3D sc…

Text truncated - open the document above for the full version.