2AYFS-GM03-50GM03-50 series Thermal imager

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

ShenzhenShiYutongTechnologyCo.LTD 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:ShenzhenShiYutongTechnologyCo.LTD Address:LianjianScienceandTechnologyIndustrialPark,DalangStreet,LonghuaDistrict, Shenzhencity,China ProductName:GM03-50seriesThermalimager FCCID:2AYFS-GM03-50 Model(s):GM03-50,GM03-35,GM06-35,GM06-50,GM03-35LRF,GM03-50LRF,GM06-35LRF, GM06-50LRF 2.911(d)(5)(i)EquipmentType We,ShenzhenShiYutongTechnologyCo.LTD(“theapplicant”)certifythattheequipmentforwhich authorizationissoughtthroughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:Fang-fangheDate:2024.8.15 TitleandCompanyname:qualitysupervisor/ShenzhenShiYutongTechnologyCo.LTD NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenShiYutongTechnologyCo.LTD 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:ShenzhenShiYutongTechnologyCo.LTD Address:LianjianScienceandTechnologyIndustrialPark,DalangStreet,LonghuaDistrict, Shenzhencity,China ProductName:GM03-50seriesThermalimager FCCID:2AYFS-GM03-50 Model(s):GM03-50,GM03-35,GM06-35,GM06-50,GM03-35LRF,GM03-50LRF,GM06-35LRF, GM06-50LRF 2.911(d)(5)(ii)Applicantfiling We,ShenzhenShiYutongTechnologyCo.LTD(“theapplicant”)certifythat,asofthedateofthe filingoftheapplication,theapplicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 ,established pursuantto§1.50002ofthischapter,asanentityproducingcoveredcommunicationsequipment. Yourssincerely, Name:Fang-fangheDate:2024.8.15 TitleandCompanyname:qualitysupervisor/ShenzhenShiYutongTechnologyCo.LTD NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Shi Yutong Technology Co. LTD 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name:Shenzhen Shi Yutong Technology Co. LTD Address:Lianjian Science and Technology Industrial Park, Dalang Street, Longhua District, Shenzhen city, China Product Name:GM03-50 series Thermal imager FCC ID: 2AYFS-GM03-50 Model(s):GM03-50, GM03-35, GM06-35, GM06-50, GM03-35LRF, GM03-50LRF, GM06-35LRF, GM06-50LRF 2.911(d)(7) USA Designated Agent for Service of Process We, Shenzhen Shi Yutong Technology Co. LTD (“the applicant”) designate [Stone Trading Limited] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Stone Trading Limited USA Address: 6547 N Academy Blvd #2266, Colorado Springs, CO 80918, United States FRN Number: 0033401936 Contact Name: Dongmei Fang Telephone No: +12134573118 Email: [email protected] Applicant Company name:Shenzhen Shi Yutong Technology Co. LTD Address:Lianjian Science and Technology Industrial Park, Dalang Street, Longhua District, Shenzhen city, China Grantee FRN Number：0030285522 FCC Grantee Code:2AYFS Contact Name:Fang-fang he Telephone No:13410135424 Email:[email protected] Signature: Title: Manager Shenzhen Shi Yutong Technology Co. LTD 2.911 (d)(7)USA Agent v1.5 Signature: Title: quality supervisor Date: 2024.8.15 Date: 2024.8.15 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

ShenzhenShiYutongTechnologyCo.LTD AgentAuthorization Company:ShenzhenShiYutongTechnologyCo.LTD Address:LianjianScienceandTechnologyIndustrialPark,DalangStreet,Longhua District,Shenzhencity,China ProductName:GM03-50seriesThermalimager ModelNumber(s):GM03-50,GM03-35,GM06-35,GM06-50,GM03-35LRF,GM03- 50LRF,GM06-35LRF,GM06-50LRF ProductDescription:GM03-50seriesThermalimager WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2024.8.15 Name:Fang-fanghe Title:qualitysupervisor Company:ShenzhenShiYutongTechnologyCo.LTD

ShenzhenShiYutongTechnologyCo.LTD ModelDifference Productdescription:GM03-50seriesThermalimager Modelname:GM03-50 GM03-35,GM06-35,GM06-50,GM03-35LRF,GM03-50LRF,GM06-35LRF, GM06-50LRF TradeName:N/A Onlyfordifferentmodelname Regards Sincerely Client’ssignature: Client’sname/title:Fang-fanghe/qualitysupervisor Contactinformation/address:Building8,RundongshengIndustrialArea,Longteng Community,XixiangStreet,Bao'anDistrict,Shenzhen,518000,China.

ShenzhenShiYutongTechnologyCo.LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2024.8.15 Subject;RequestforConfidentiality FCCID:2AYFS-GM03-50 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:Fang-fanghe Title:qualitysupervisor

EUTPHOTO(ExternalPhotos) ※※※※※ENDOFREPORT※※※※※

Labelandlabellocation 2cm GM03-50seriesThermalimager FCCID:2AYFS-GM03-50 1.5cm

EUTPHOTO(InternalPhotos) ANT ※※※※※ENDOFREPORT※※※※※

FCCID:2AYFS-GM03-50 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1093 ， UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone 1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposure conditions,bymeasurementornumericalsimulation,isnotrequiredwhenthe correspondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f (GHz) ]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f (GHz) istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Here, For2.4GWIFI ModeMax Power(dBm) Max Power(mW) Frequency(MHz)Min. distance(mm) Calc. thresholds limit 802.11b6.884.88246251.511183.0 802.11g7.2295.28246251.637633.0 SoaSARtestisnotrequired

ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 AcknowledgmentLetter SPECIFICATIONFORAPPROVAL ApprovalustomerApproval PreparedByCheckedByApprovalByCheckedByApprovalBy Signature Huang Zongbao FuXuerongXiaChenglei Date2023.5.262023.5.262023.5.26 hangeLog VersionChangeDescriptionPersoninChargeApprovalByDate CustomerNameShiyutong CustomerProject Name PMProjectNamePM CustomerP/NSDCP/N WF4584B-B45R-A Band WIFI2.4G/BT Version A0 DesignerInformation RFEngineerFuXuerongR&DDiretorXiaChenglei MEEngineerHuangZongbao ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 Catalogue No.ItemPageNo. 1DrawingorProductImage3 2DimensionsTestReport4 3RFPerformanceTestReport5-7 4ReliabilityTestReport18 5PackageDocument9 6RoHSControllistforSample10 7InstallWizardorOther10 ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 DrawingorProductImage L i Y a o N a W F 4 5 8 4 B - B 4 5 R - A P M X . X ± 0 . 5 X . X X ± 0 . 2 X X X . ± 1 0 . 0 X X . ± 5 . 0 X . ± 2 . 0 1 4 5 1 C u s t o m e r m o d e F i n i s h e d m a t e r i a l n u m b e r p r o p o r t i o n E d i t i o n U n i t V i e w C h a n g e c o n t e n t P a g e n u m b e r  S D C P M W F  H a n d a H a n d a  ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 SampleDimensionsTestReport TestDate2023.5.26SampleQty.3Inspector XuYanfang DimensionNo.StandardSample1Sample2Sample3Pass/NG ①length18.8±0.2mm18.818.918.8 Pass ②width14.52±0.2mm14.5214.6214.52 Pass ③ thickness 0.1±0.03mm0.10.10.1 Pass ④Linelength45±2mm454646 Pass ⑤ ⑥ ⑦ ConclusionPASS Inspector&Date XuYanfang2023.5.26 Approval&Date ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 RFPerformanceTestReport AntennaTestEquipmentIntroduction TestofantennainputcharacteristicsusingAgilentE5071CandAgilent5062Avectornetwork analyzer;Theradiationpatternoftheantennaaretestedusingtheguangping3DnearfieldAnechoicChamber, andtheinstrumentisusedtoagilent8960E5515andAgilentE4438C.Thetestcoordinatesofthedarkroom areasfollows: 1.S11Parameter-VSWR MeasuringMethodisa50Ωcoaxialcableisconnectedtotheantenna.Thenthiscableisconnectedtoanetworkanalyzer tomeasuretheS11parameter,Keepingthisfixtureawayfrommetalatleast20cm. ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 S11Parameter-VSWR 2. AntennaMatchingNetwork frequency （ MHZ ） 2400 24502500 standing-waveratio 1.621.411.62 ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 3.Gain&Efficiency Frequency(MHz)Efficiency(%)PeakGAIN(dBi) 2400 31.74-0.59 2450 29.65-0.51 2500 28.15-0.93 ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 ReliabilityTestReport TestDate2023.5.26SampleQty.3Inspector XuYanfang TestItemRequirement testing equipment Sample1Sample2Sample3PASS/NG high temperature storage Exposeto+85°Cfor 24hours,recoverfor 2hours,andconduct testing Constant temperature andhumidity box OKOKOKPass low temperature storage Exposeto-40°Cfor 24hours,recoverfor 2hours,andperform testing Constant temperature andhumidity box OKOKOKPass High temperature operation Poweredonfor24 hoursat+60°C Constant temperature andhumidity box OKOKOKPass Low temperature operation Poweredonfor24 hoursat-20°C Constant temperature andhumidity box OKOKOKPass Saltspray test (5士0．5)%sodium chloride、pHValue is6.5～7.2， Temperatureof experimental chamber(35±2)°C □24H☑48H Saltspray testing machine OKOKOKPass Connector rivetingand pulling force 1.13Wirediameter≥ 10N 0.81Wirediameter≥ 8N RG174≥60N RG178≥50N Push-pull forcegauge ≥10N≥10N≥10NPass Conclusion Pass Inspector& Date XuYanfang2023.5.26 Approval&D ate ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo.,LTD CompanyAddress:4thFloor,BuildingB5,XinfuIndustrialPark,ChongqingRoad,FuyongTown,Bao'anDistrict, ShenzhenTEL:0755-27211658FAX:0755-29485750 ProductROHSCompositionDeclarationForm InstallWizard orOther setupscript： Take1PCSofproduct,tearoffthereleasepaperonthebackoftheFPCbyhand,and thenaligntheFPCpositioningholepositionwiththeshellpositioningholeposition (positioningribpositionorpositioningline),andattachitflattotheshell,asshown inthefollowingfigure: Installationprocessprecautions： □EnsurethattheFPCisfullyattachedtothehousingafterpastingtheantenna； □Alignthepositioningholewiththepositionofthecasingpositioningcolumn； □AlignFPCedgewithshelledge； □WhenattachingtheterminaltothePCBAendofthemotherboard,pleasefirstalign theterminalsandthensnapthemvertically； □Whendisassemblingantennaterminals,itisnecessarytouseatool(suchasaspecial prybar)toverticallylifttheterminalsandnotdirectlypull thewiresfordisassembly produc tname Unifo rm mater ial Harmfulsubstancecontent(PPM) HStestreportnumber DateofHStest report PbCdHgCrBr WIFI& BT anten na FPC NDNDNDNDND UNIB21042707HR-01 2023.5.26 NDNDNDNDND NDNDNDNDND NDNDNDNDND NDNDNDNDND wire rod NDNDNDNDND NDNDNDNDND NDNDNDNDND termin NDNDNDNDND ResearchanddevelopmentofShenzhenRuifengElectronicTechnolo…

Text truncated - open the document above for the full version.

ProjectNo.:ZKT-2407198430E Page 1 of 46 FCCTESTREPORT FCCID:2AYFS-GM03-50 ReportNumber...................................: ZKT-2407198430E DateofTest.......................................................: Jul.19,2024toJul.29,2024 Dateofissue.........................................: Jul.29,2024 Totalnumberofpages .......................... 46 TestResult ............................................ : PASS TestingLaboratory............................: ShenzhenZKTTechnologyCo.,Ltd. Address...............................................: 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................:ShenzhenShiYutongTechnologyCo.LTD Address...............................................: LianjianScienceandTechnologyIndustrialPark,DalangStreet, LonghuaDistrict,Shenzhencity,China Manufacturer'sname......................:ShenzhenShiYutongTechnologyCo.LTD Address...............................................: LianjianScienceandTechnologyIndustrialPark,DalangStreet, LonghuaDistrict,Shenzhencity,China Testspecification: Standard ................................................ : FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10:2013 Testprocedure.....................................: / Non-standardtestmethod ................ :N/A TestReportFormNo........................: TRF-EL-110_V0 TestReportForm(s)Originator.....: ZKTTesting MasterTRF........................................: Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmay bealteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname ..................................... :GM03-50seriesThermalimager Trademark...........................................:N/A Model/Typereference.........................:GM03-50 GM03-35,GM06-35,GM06-50,GM03-35LRF,GM03-50LRF, GM06-35LRF,GM06-50LRF Ratings..................................................: Input:5V2A AdapterInput:100-240V~,50/60Hz0.3A Output:5V2A,10Wssss Battery:3.6V/4.2V,5000mAh ProjectNo.:ZKT-2407198430E Page 2 of 46 Testingprocedureandtestinglocation: TestingLaboratory.......................................:ShenzhenZKTTechnologyCo.,Ltd. Address............................................................:1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China Jim.Liu Testedby(name+signature).......................: Jackson.Fang Reviewer(name+signature).......................: LakeXie Approved(name+signature) ....................... : ProjectNo.:ZKT-2407198430E Page 3 of 46 TableofContents Page 1.VERSION.....................................................................................................................5 2.SUMMARYOFTESTRESULTS..................................................................................6 2.1TESTFACILITY....................................................................................................................7 2.2MEASUREMENTUNCERTAINTY.......................................................................................7 3.GENERALINFORMATION..........................................................................................8 3.1GENERALDESCRIPTIONOFEUT....................................................................................8 3.2DESCRIPTIONOFTESTMODES......................................................................................9 3.3BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED.................9 3.4DESCRIPTIONOFSUPPORTUNITS(CONDUCTEDMODE)........................................10 3.5EQUIPMENTSLISTFORALLTESTITEMS.....................................................................11 4.EMCEMISSIONTEST...............................................................................................13 4.1CONDUCTEDEMISSIONMEASUREMENT....................................................................13 4.1.1POWERLINECONDUCTEDEMISSIONLimits.....................................................13 4.1.2TESTPROCEDURE..................................................................................................13 4.1.3DEVIATIONFROMTESTSTANDARD.....................................................................13 4.1.4TESTSETUP.............................................................................................................14 4.1.5EUTOPERATINGCONDITIONS..............................................................................14 4.2.1RADIATEDEMISSIONLIMITS.................................................................................17 4.2.2TESTPROCEDURE..................................................................................................18 4.2.3DEVIATIONFROMTESTSTANDARD.....................................................................18 4.2.4TESTSETUP.............................................................................................................18 4.2.5EUTOPERATINGCONDITIONS..............................................................................19 4.2.6TESTRESULTS.........................................................................................................19 5.RADIATEDBANDEMISSIONMEASUREMENT........................................................26 5.1TESTREQUIREMENT:......................................................................................................26 5.2TESTPROCEDURE..........................................................................................................26 5.3DEVIATIONFROMTESTSTANDARD.............................................................................26 5.4TESTSETUP......................................................................................................................27 5.5EUTOPERATINGCONDITIONS.................…

Text truncated - open the document above for the full version.

EUTTESTPHOTO ※※※※※ENDOFREPORT※※※※※