2AYGJ-GP102BTBluetooth Headphone

On the right earcup,carefully plug the micro USB cable into micro USB charging port. and connect the other end of the cable to either a computer USB port or to a USB-compatible car or wall charger. Solid red LED light will appear to indicate when the headphone is charging. When charging is complete, the LED light will turn Blue. Charging time is approximately 1.5 hours. Press & hold the power button on the right side of the headphone for about 3 seconds until the LED indicator light turns on. Press & hold the power button again for 3 seconds until the LED light turns off. Power on the wireless bluetooth headphone(refer to the “Turn It On”section). To pair the headphone with a new device,the red & blue LED light blink to indicate it is ready to be paired with you device. On your Bluetooth-enabled smartphone,tablet or media player,navigate to the Bluetooth settings menu,turn on the Bluetooth feature,and search for new devices After a few seconds you will see “Q201BT”listed. Tap this model to select it.Solid blue LED light indicate your device has successfully paired. With your previously paired device’s Bluetooth turned on and in range,The headphone will automatically reconnect to the last Bluettooth device it was connected to. NOTE:If the headphone is not used within 5 minutes,the headphones will automatically turn off to save battery. Connect your device to the headphone via Bluetooth(refer to the”Pair & Connect”section) Open your favorite music app and press play. Control the music,track & volume from your device,or control the music & volume.Press the Power button once to play/pause music & answer calls,press it twice to redial the last number called on your phone,and press & hold it to reject an incoming call. All audio,including music,games,videos,and notifications will be routed through the headphone. Press&Hold area(refer to product Diagram) to turn up the volume Press&Hold area(refer to product Diagram) to turn down the volume. Press area(refer to product Diagram) to nex track. Press area(refer to product Diagram) to previous track. No power Recharge your wireless bluetooth headphone using the micro USB cable. Make sure your Bluetooth device has A2DP profile. Check if both devices are paired and connected over Bluetooth.Restart the headphone to reconnect your Bluetooth device. Navigate to your Bluetooth settings menu on your Bluetooth device,tap “Q201BT”,and select “Forget”. Now follow the steps to pair your device again.Or, press & hold the power button on the headphone (while powered on) to disconnect the headphones from any connected devices. Then follow the steps to reconnect your device. Music is not playing over Bluetooth Bluetooth device will not reconnect with the headphone Charge It Turn It On/Off Pair & Connect With New Device Play Button Function Toroubleshooting Product Diagram 2 3 4 1 Previous Track / Volume Dowm Voice Assistant Type C Charging Port LED indicator Play/Pause,Answer/End Calls Double Click: Re-dial Last Dialed Phone Number Press & Hold (1-2 Sec):Reject Incoming Call Microphone Press & Hold (3 Sec):Power On Press & Hold (3 Sec):Power Off 3 Next Track / Volume Up 2 4 5 6 7 3.5mm jacker 8 1 + - + - Press area(refer to product Diagram) to Voice Assistant. USING MANUALUSING MANUAL 5 6 7 8 FCC W arnings This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Wa rn ing: Chan g es or m odifi cation s to this unit no t express ly app rov ed b y the p arty respon si bl e fo r c ompliance cou l d void the us er’s aut h ority to op er ate th e e quipme nt. NOTE: This eq uipment ha s be en tes t e d an d found to co mply with the lim its f o r a Class B digit al de v ice, p ursuant to Part 15 of th e FC C Rules. The s e lim its a re des ig ned to provid e reasonab le p rot e ctio n aga i nst h arm fu l int erference in a residential insta llation . This eq uipment gen era tes, u ses , and can radiate rad i o fr eq uen c y e ne rgy and, if n ot insta lled and used i n acc ord a nce with th e instructio ns, ma y c ause ha rmf ul interferen ce to radi o c ommu ni cati ons. Howe ver, there is no guarantee that interference wi ll not oc cur in a partic ular installation. If this equipment d oes cause harm ful inter fere nce to radi o or television reception, which can be determined by turning the equipment off and on, the user is encoura ged t o t ry to c orr ec t the in terferenc e by one o r mo re of the foll owing m ea sures: • Reorien t or relocat e t he receiving ant enna. • Inc rease the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

ShenzhenCity Shangdexincheng Electronics Co., Ltd. Add: Shierxiangshu, Wuhe Community, Bantian Street, Longgang District 502-05C, Building L1, Shenzhen Guangdong province, China Date: 2021-7-7 FCC ID: 2AYGJ-GP102BT Dear Sir/Madam, We, ShenzhenCity Shangdexincheng Electronics Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Bluetooth Headphone Model no.: GP102BT, GP102BT-BK, GP102BT-W Sincerely, Name/Title： Silvia Chen/Manager Company: ShenzhenCity Shangdexincheng Electronics Co., Ltd. Address: Shierxiangshu, Wuhe Community, Bantian Street, Longgang District 502-05C, Building L1, Shenzhen Guangdong province, China Phone: 86 13590386623 Fax: 86 0755-82591330 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-7-7> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AYGJ-GP102BT GP102BT For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Silvia Chen/Manager Company: ShenzhenCity Shangdexincheng Electronics Co., Ltd. Address: Shierxiangshu, Wuhe Community, Bantian Street, Longgang District 502-05C, Building L1, Shenzhen Guangdong province, China Phone: 86 13590386623 Fax: 86 0755-82591330 E-Mail: [email protected]

ShenzhenCity Shangdexincheng Electronics Co., Ltd. Shierxiangshu, Wuhe Community, Bantian Street, Longgang District 502-05C, Building L1, Shenzhen Guangdong province, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2021-7-7 To whom it may concern: We, ShenzhenCity Shangdexincheng Electronics Co., Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AYGJ-GP102BT including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Silvia Chen/Manager Company: ShenzhenCity Shangdexincheng Electronics Co., Ltd. Address: Shierxiangshu, Wuhe Community, Bantian Street, Longgang District 502-05C, Building L1, Shenzhen Guangdong province, China Phone: 86 13590386623 Fax: 86 0755-82591330 E-Mail: [email protected]

ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT EXTERIORPHOTOGRAPHS Fig.1 Fig.2 ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT Fig.3 Fig.4 ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT Fig.5 Fig.6 ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT Fig.7 Fig.8 ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT Fig.9 Fig.10

ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT _____________________________________________________________________________________________________ Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd.. Page1of1 LABELANDLOCATION Size:L1.0cm*W0.5cm Material:Tagboard Glue:adhesivesticker Fontcolor:Blue Labelcolor:White BluetoothHeadphone ModelNo.:GP102BT FCCID:2AYGJ-GP102BT LabelLocation

ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT INTERIORPHOTOGRAPHS Fig.1 Fig.2 ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT Fig.3 Fig.4 Antenna ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT Fig.5 Fig.6 ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT Fig.7

ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT ___________________________________________________________________________ Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page 1 of 4 FCCRFExposureEvaluation 1.ProductInformation FCCID:2AYGJ-GP102BT Productname:BluetoothHeadphone TestModel:GP102BT AdditionalModelNo.:GP102BT-BK,GP102BT-W ModelDeclaration : PCBboard,structureandinternalofthesemodel(s)arethesame,So noadditionalmodelsweretested Powersupply:Input:DC5V,1A DC3.7VbyRechargeableLi-ionBattery,350mAh Bluetooth:2402MHz-2480MHz ChannelNumber:40channelsforBluetoothV5.0(BTLE) ChannelSpacing:2MHzforBluetoothV5.0(BTLE) ModulationType:GFSKforBluetoothV5.0(BTLE) BluetoothVersion:V5.0 AntennaType:PCBAntenna AntennaGain:0dBi(Max.) Hardwareversion:V1.1.1 Softwareversion:V1.1.3 Exposurecategory:Generalpopulation/uncontrolledenvironment EUTType:ProductionUnit DeviceType:PortableDevice ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT ___________________________________________________________________________ Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page 2 of 4 2. EvaluationmethodandLimit AccordingtoKDB447498D01GeneralRFExposureGuidancev06Section4.3.1StandaloneSARtest exclusionconsiderations:“UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures, standalone1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions, bymeasurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARTestExclusion Thresholdcondition,listedbelow,issatisfied.Thesetestexclusionconditionsarebasedonsource-based time-averagedmaximumconductedoutputpoweroftheRFchannelrequiringevaluation,adjustedfor tune-uptolerance,andtheminimumtestseparationdistancerequiredfortheexposureconditions.22The minimumtestseparationdistanceisdeterminedbythesmallestdistancefromtheantennaandradiating structuresoroutersurfaceofthedevice,accordingtothehostformfactor,exposureconditionsand platformrequirements,toanypartofthebodyorextremityofauserorbystander(see5)ofsection4.1). ToqualifyforSARtestexclusion,thetestseparationdistancesappliedmustbefullyexplainedandjustified bytheoperatingconfigurationsandexposureconditionsofthetransmitterandapplicablehostplatform requirements,typicallyintheSARmeasurementorSARanalysisreport,accordingtotherequiredpublished RFexposureKDBprocedures.WhennootherRFexposuretestingorreportingisrequired,astatementof justificationandcompliancemustbeincludedintheequipmentapproval,inlieuoftheSARreport,to qualifyfortheSARtestexclusion.Whenrequired,thedevicespecificconditionsdescribedintheother publishedRFexposureKDBproceduresmustbesatisfiedbeforeapplyingtheseSARtestexclusion provisions;forexample,handheldPTTtwo-wayradios,handsets,laptops&tabletsetc.“ [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]·[√f(GHz)] ≤3.0for1-gSARand≤7.5for10-gextremitySAR,where: •f(GHz)istheRFchanneltransmitfrequencyinGHz •PoweranddistanceareroundedtothenearestmWandmmbeforecalculation •Theresultisroundedtoonedecimalplaceforcomparison •3.0and7.5arereferredtoasthenumericthresholdsinthestep2below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mmandfor transmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparationdistanceis<5 mm,adistanceof5mmaccordingtof)insection4.1isappliedtodetermineSARtestexclusion. Whenoneofthefollowingtestexclusionconditionsissatisfiedforallcombinationsofsimultaneous transmissionconfigurations,furtherequipmentapprovalisnotrequiredtoincorporatetransmitter modulesinhostdevicesthatoperateinthemixedmobileandportablehostplatformexposureconditions. ThegranteeisresponsiblefordocumentingthisaccordingtoClassIpermissivechangerequirements. AntennasthatqualifyforstandaloneSARtestexclusionmustapplytheestimatedstandaloneSARto determinesimultaneoustransmissiontestexclusion. a)The[∑of(thehighestmeasuredorestimatedSARforeachstandaloneantennaconfiguration,adjusted formaximumtune-uptolerance)/1.6W/kg]+[∑ofMPEratios]is≤1.0. b)TheSARtopeaklocationseparationratiosofallsimultaneouslytransmittingantennapairsoperatingin portabledeviceexposureconditionsareall≤0.04,andthe[∑ofMPEratios]is≤1.0. 3.ReferEvaluationMethod ANSIC95.1–2019:IEEEStandardforSafetyLevelswithRespecttoHumanExposuretoElectric,Magnetic,and ElectromagneticFields,0Hzto300GHz FCCKDBpublication447498D01GeneralRFExposureGuidancev06:MobileandPortableDevicesRFExposure ProceduresandEquipmentAuthorizationPolicies. FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1093:Radiofrequencyradiationexposureevaluation:portabledevices ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT ___________________________________________________________________________ Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page 3 of 4 4.ConductedPowerResults <BTLE> ModeChannelFrequency(MHz)PeakConductedOutputPower(dBm) GFSK 02402 0.157 192440 1.503 392480 0.002 <BT2LE> ModeChannelFrequency(MHz)PeakConductedOutputPower(dBm) GFSK 024021.389 1924401.458 3924801.917 5.ManufacturingTolerance <BTLE> GFSK(Peak) ChannelChannel0Channel19Channel39 Target(dBm)1.01.01.0 Tolerance±(dB)1.01.01.0 <BT2LE> GFSK(Peak) ChannelChannel0Channel19Channel39 Target(dBm)1.01.01.0 Tolerance±(dB)1.01.01.0 6.EvaluationResults 6.1StandaloneEvaluation <BTLE> Band/Modef(GHz) Antenna Distance (mm) RFoutputpowerSARTest Exclusion Threshold SARTest Exclusion dBmmW BTLEGFSK2.48052.01.58490.4992<3.0Yes <BT2LE> Band/Modef(GHz) Antenna Distance (mm) RFoutputpowerSARTest Exclusion Threshold SARTest Exclusion dBmmW BTLEGFSK2.48052.01.58490.4992<3.0Yes Remark: 1.Outputpowerincludingtuneuptolerance; 2.Whentheminimumtestseparationdistanceis<5mm,adistanceof5mmaccordingtof)insection4.1is appliedtodetermineSARtestexclusion. ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT ___________________________________…

Text truncated - open the document above for the full version.

ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page1of26 AppendixA RFTestDataforBTV5.0(BTLE)(ConductedMeasurement) ProductName:BluetoothHeadphone TradeMark:GoldenPlayer TestModel:GP102BT EnvironmentalConditions Temperature: 22.0°C RelativeHumidity:53.0% ATMPressure:100.0kPa TestEngineer:KayHu Supervisedby:LiHuan A.1DutyCycle BTLE TestModeTestChannelAntDutyCycle[%]Verdict BTLE2440Ant1100PASS #imgrbble1hchnnav ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page2of26 BT2LE TestModeTestChannelAntDutyCycle[%]Verdict BT2LE2440Ant1100PASS #imgrbble1hchnnav ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page3of26 A.2MaximumConductedPeakOutputPower BTLE ModeChannelConductPeakPower[dBm]Limit[dBm]Verdict BTLELCH0.15730PASS BTLEMCH1.50330PASS BTLEHCH0.00230PASS TestGraphs LCH MCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page4of26 HCH BT2LE ModeChannelConductPeakPower[dBm]Limit[dBm]Verdict BT2LELCH1.38930PASS BT2LEMCH1.45830PASS BT2LEHCH1.91730PASS TestGraphs LCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page5of26 MCH HCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page6of26 A.3MaximumPowerSpectralDensity BTLE ModeChannelPSD[dBm/3KHz]Limit[dBm/3KHz]Verdict BTLELCH-14.6918PASS BTLEMCH-13.2658PASS BTLEHCH-14.7728PASS TestGraphs LCH MCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page7of26 HCH BT2LE ModeChannelPSD[dBm/3KHz]Limit[dBm/3KHz]Verdict BT2LELCH-17.9078PASS BT2LEMCH-17.8848PASS BT2LEHCH-17.3158PASS TestGraphs LCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page8of26 MCH HCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page9of26 A.46dBBandwidth BTLE ModeChannel6dBBandwidth[MHz]Limit[MHz]Verdict BTLELCH0.6715 ≥0.5 PASS BTLEMCH0.6718 ≥0.5 PASS BTLEHCH0.6687 ≥0.5 PASS TestGraphs LCH MCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page10of26 HCH BT2LE ModeChannel6dBBandwidth[MHz]Limit[MHz]Verdict BT2LE LCH1.156 ≥0.5 PASS BT2LE MCH1.255 ≥0.5 PASS BT2LE HCH1.151 ≥0.5 PASS TestGraphs LCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page11of26 MCH HCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page12of26 A.5RFConductedSpuriousEmissions BTLE ModeChannelPref[dBm]Max.Level[dBm]Limit[dBm]Verdict BTLELCH-0.368-37.591-20.368PASS BTLEMCH0.994-37.017-19.006PASS BTLEHCH-0.525-37.911-20.525PASS BTLE_LCH_Graphs Pref/BTLE/LCH Puw/BTLE/LCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page13of26 BTLE_MCH_Graphs Pref/BTLE/MCH Puw/BTLE/MCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page14of26 BTLE_HCH_Graphs Pref/BTLE/HCH Puw/BTLE/HCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page15of26 BT2LE ModeChannelPref[dBm]Max.Level[dBm]Limit[dBm]Verdict BT2LE LCH-0.27-37.755-20.270PASS BT2LE MCH0.011-38.273-19.989PASS BT2LE HCH0.339-37.590-19.661PASS BTLE_LCH_Graphs Pref/BTLE/LCH Puw/BTLE/LCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page16of26 BTLE_MCH_Graphs Pref/BTLE/MCH Puw/BTLE/MCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page17of26 BTLE_HCH_Graphs Pref/BTLE/HCH Puw/BTLE/HCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page18of26 A.6Band-edgeforRFConductedEmissions BTLE ModeChannelCarrierPower[dBm] Max.SpuriousLevel [dBm] Limit[dBm]Verdict BTLELCH-0.614-50.428-20.61PASS BTLEHCH-0.364-50.061-20.36PASS TestGraphs LCH HCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page19of26 BT2LE ModeChannelCarrierPower[dBm] Max.SpuriousLevel [dBm] Limit[dBm]Verdict BT2LELCH-1.667-49.935-21.67PASS BT2LEHCH0.661-49.277-19.34PASS TestGraphs LCH HCH ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page20of26 B.7Restrict-bandband-edgemeasurements BTLE Test Mode Test Chann el AntFreq. Power [dBm] GainGround Factor E [dBuV/m] Detector Limit [dBuV/ m] Verdi ct BTLE 2402 Ant12310.0-42.612.00 54.62 PEAK74PASS Ant12310.0-53.342.00 43.89 AV54PASS Ant12390.0-43.722.00 53.51 PEAK74PASS Ant12390.0-53.072.00 44.16 AV54PASS 2480 Ant12483.5-43.122.00 54.11 PEAK74PASS Ant12483.5-52.572.00 44.66 AV54PASS Ant12500.0-41.562.00 55.67 PEAK74PASS Ant12500.0-52.462.00 44.77 AV54PASS ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page21of26 Restrict-bandband-edgemeasurements_BTLE_2402_Ant1_PEAK Restrict-bandband-edgemeasurements_BTLE_2402_Ant1_AV ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page22of26 Restrict-bandband-edgemeasurements_BTLE_2480_Ant1_PEAK Restrict-bandband-edgemeasurements_BTLE_2480_Ant1_AV ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page23of26 BT2LE Test Mode Test Chann el AntFreq. Power [dBm] Gain Ground Factor E [dBuV/m] Detector Limit [dBuV/ m] Verdi ct BT 2LE 2402 Ant12310.0-43.452.00 53.78 PEAK74PASS Ant12310.0-53.282.00 43.95 AV54PASS Ant12390.0-41.822.00 55.41 PEAK74PASS Ant12390.0-53.032.00 44.20 AV54PASS 2480 Ant12483.5-40.542.00 56.69 PEAK74PASS Ant12483.5-51.472.00 45.76 AV54PASS Ant12500.0-43.442.00 53.79 PEAK74PASS Ant12500.0-52.282.00 44.95 AV54PASS ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page24of26 Restrict-bandband-edgemeasurements_BT2LE_2402_Ant1_PEAK Restrict-bandband-edgemeasurements_BT2LE_2402_Ant1_AV ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Page25of26 Restrict-bandband-edgeme…

Text truncated - open the document above for the full version.

ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page 1 of 34 FCCTESTREPORT For ShenzhenCityShangdexinchengElectronicsCo.,Ltd. BluetoothHeadphone TestModel:GP102BT AdditionalModelNo.:PleaseRefertoPage6 Preparedfor:ShenzhenCityShangdexinchengElectronicsCo.,Ltd. Address:Shierxiangshu,WuheCommunity,BantianStreet,LonggangDistrict 502-05C,BuildingL1,ShenzhenGuangdongprovince,China Preparedby:ShenzhenLCSComplianceTestingLaboratoryLtd. Address:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China Tel:(+86)755-82591330 Fax:(+86)755-82591332 Web:www.LCS-cert.com Mail:[email protected] Dateofreceiptoftestsample:June25,2021 Numberoftestedsamples:2 SampleNo.:210621145A-1,210621145A-2 Serialnumber:Prototype DateofTest:June25,2021~July02,2021 DateofReport:July05,2021 ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page 2 of 34 FCCTESTREPORT FCCCFR47PART15C(15.247) ReportReferenceNo......................:LCS210621145AEA DateofIssue.......................................:July05,2021 TestingLaboratoryName..............:ShenzhenLCSComplianceTestingLaboratoryLtd. Address................................................:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China TestingLocation/Procedure............:FullapplicationofHarmonisedstandards■ PartialapplicationofHarmonisedstandards□ Otherstandardtestingmethod□ Applicant’sName.............................:ShenzhenCityShangdexinchengElectronicsCo.,Ltd. Address................................................:Shierxiangshu,WuheCommunity,BantianStreet,LonggangDistrict 502-05C,BuildingL1,ShenzhenGuangdongprovince,China TestSpecification Standard..............................................: FCCCFR47PART15C(15.247) TestReportFormNo......................:LCSEMC-1.0 TRFOriginator....................................:ShenzhenLCSComplianceTestingLaboratoryLtd. MasterTRF.........................................:Dated2011-03 ShenzhenLCSComplianceTestingLaboratoryLtd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenLCSComplianceTestingLaboratoryLtd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenLCSComplianceTestingLaboratoryLtd.takesnoresponsibilityforandwillnot assumeliabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. EUTDescription...............................:BluetoothHeadphone TradeMark..........................................:GoldenPlayer TestModel...........................................:GP102BT Ratings.................................................:Input:DC5V,1A DC3.7VbyRechargeableLi-ionBattery,350mAh Result...................................................:Positive Compiledby:Supervisedby:Approvedby: Diamond.Lu/AdministratorsJinWang/TechniqueprincipalGavinLiang/Manager ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page3of34 FCC--TESTREPORT TestModel...............................:GP102BT EUT.........................................:BluetoothHeadphone Applicant...............................:ShenzhenCityShangdexinchengElectronicsCo.,Ltd. Address..................................:Shierxiangshu,WuheCommunity,BantianStreet,Longgang District502-05C,BuildingL1,ShenzhenGuangdongprovince, China Telephone...............................:/ Fax..........................................:/ Manufacturer........................:SHENZHENLISAIERTRONICSCO.,LTD. Address...................................:NO.22,XIHUINDUSTRIALPARK,XIKENG,HENGGANGTOWN, LONGGANGDISTRICT,SHENZHEN,CHINA Telephone...............................:/ Fax..........................................:/ Factory...................................:SHENZHENLISAIERTRONICSCO.,LTD. Address...................................:NO.22,XIHUINDUSTRIALPARK,XIKENG,HENGGANGTOWN, LONGGANGDISTRICT,SHENZHEN,CHINA Telephone...............................:/ Fax..........................................:/ TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. TestReportNo.:LCS210621145AEA July05,2021 Dateofissue ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page4of34 RevisionHistory RevisionIssueDateRevisionsRevisedBy 000July05,2021InitialIssueGavinLiang ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BTReportNo.:LCS210621145AEA Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenLCSComplianceTestingLaboratoryLtd. Page5of34 TABLEOFCONTENTS 1.GENERALINFORMATION.....................................................................................................................................6 1.1.DESCRIPTIONOFDEVICE(EUT).........................................................................................................................6 1.2.HOSTSYSTEMCONFIGURATIONLISTANDDETAILS..........................................................................................7 1.3.EXTERNALI/OCABLE..........................................................................................................................................7 1.4.DESCRIPTIONOFTESTFACILITY.........................................................................................................................7 1.5.STATEMENTOFTHEMEASUREMENTUNCERTAINTY.................................…

Text truncated - open the document above for the full version.

ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT _______________________________________________________________________________________________ TESTSETUPPHOTOGRAPHS PhotoofRadiatedEmissionsMeasurement Below1GHz Above1GHz ShenzhenLCSComplianceTestingLaboratoryLtd.FCCID:2AYGJ-GP102BT _______________________________________________________________________________________________ PowerLineConductedEmission