2AYJ4TT-XXV5Interactive Flat Panel

1/49 IFPD User Manual NOTE This document may be updated irregularly for upgrade version or other reasons. Unless some additional agreements, there is no guarantee for any explicitly and implicitly made by statements, information or suggestions in this document. REV. DateDescription V1.02022.01.24 INITIAL ISSUE 2/49 目录Content 1Introduction..........................................................................................................................................5 2Productfunction...................................................................................................................................5 2.1Bootwizard................................................................................................................................5 2.2Launcher....................................................................................................................................6 2.2.1Introductionofpageelements........................................................................................7 2.2.2Statusbar........................................................................................................................7 2.3Sidebar......................................................................................................................................8 2.3.1Back.................................................................................................................................8 2.3.2Home...............................................................................................................................8 2.3.3Multi-task.........................................................................................................................8 2.3.4Annotation.......................................................................................................................9 2.3.5Controlpanel...................................................................................................................9 2.3.6Signalsource................................................................................................................10 2.4Campass..................................................................................................................................10 2.5Whiteboard...............................................................................................................................11 2.5.1Menu.............................................................................................................................12 2.5.2Setting...........................................................................................................................13 2.5.3PageManagement........................................................................................................13 2.5.4Paintbrush.....................................................................................................................14 2.5.5Erase.............................................................................................................................14 2.5.6Select............................................................................................................................14 2.5.7Insert.............................................................................................................................15 2.5.8UndoandRedo.............................................................................................................16 2.5.9More..............................................................................................................................16 2.6Miniwhiteboard.......................................................................................................................17 3/49 2.7Annotation................................................................................................................................17 2.7.1Pen................................................................................................................................18 2.7.2Erase.............................................................................................................................18 2.7.3Scanshare....................................................................................................................18 2.7.4Minimization..................................................................................................................19 2.7.5CloseandSave.............................................................................................................19 2.8Filemanager............................................................................................................................20 2.8.1Introduction...................................................................................................................20 2.8.2Commonfunction..........................................................................................................20 2.9Multi-user.................................................................................................................................21 2.9.1Addandentermultipleusers........................................................................................21 2.9.2Multi-UserManagement...............................................................................................22 2.10Multi-window..........................................................................................................................22 2.10.1OpeningMulti-Window................................................................................................22 2.10.2Multi-WindowOperation.............................................................................................23 2.11Welcomepage.......................................................................................................................24 2.12Screenrecording..............................................................…

Text truncated - open the document above for the full version.

(Osborne Technologies Limited) (May. 22, 2023) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID:2AYJ4TT-XXV5) [Osborne Technologies Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Mr. N Roberts (Osborne Technologies Limited) (May. 22, 2023) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID:2AYJ4TT-XXV5) [Osborne Technologies Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Mr. N Roberts

Attestation Statements (Jul. 06, 2023) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID:2AYJ4TT-XXV5 ) (Osborne Technologies Limited), the undersigned, hereby authorize (Osborne Technologies Inc.) to act as our designated U.S. agent for service of process, (Osborne Technologies Limited) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (Osborne Technologies Inc.) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information： Company name: Osborne Technologies Limited Contact Name: Mr. N Roberts Address: Unit 14 Capitol Court, Capitol Park, Dodworth, Barnsley, South Yorkshire, United Kingdom Telephone No: 13538214502 Email: [email protected] U.S. Agent Information: Company Name: Osborne Technologies Inc. Address: 15 Little Brook Lane Ste 2, Newburgh, NY, 12550, USA Contact Name: Ryan Osborne Telephone No: +1 (646) 982 1177 Email: [email protected] FRN: 0033649955 Applicant Signature: Agent Signature: Applicant printed name: Mr. N Roberts Agent printed name: Ryan Osborne

Osborne Technologies Limited Model Difference Data：2023.05.23 Product description: Interactive Flat Panel Model name: TT-75V5, TT-55V5, TT-65V5, TT-86V5, TT-98V5 Trade Name: Tango FCC ID: 2AYJ4TT-XXV5 All the model are the same circuit and RF module, except model names . Regards Sincerely Client’s signature : Client’s name / title : Mr. N Roberts Contact information / address：Unit 14 Capitol Court, Capitol Park, Dodworth, Barnsley, South Yorkshire, United Kingdom

Osborne Technologies Limited (2023.05.23) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Interactive Flat Panel / TT-75V5, TT- 55V5, TT-65V5, TT-86V5, TT-98V5 / FCC ID: 2AYJ4TT-XXV5) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Mr. N Roberts Title: /

Osborne Technologies Limited (2023.05.23) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Mr. N Roberts Title: /

External Photos ANT1 2.4GWIFI+5GWIFI+ BT ANT2 2.4GWIFI +5GWIFI ANT3 2.4GWIFI+5GWIFI ANT4 2.4GWIFI+5GWIFI

Model: TT-75V5 FCC ID: 2AYJ4TT-XXV5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Internal Photos ANT1 ANT2 ANT3 ANT4

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2AYJ4TT-XXV5 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm Test Result of RF Exposure Evaluation Modes& Channel Freq. (MHz) Tune up Produce power Maximu m peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result BLE GFSK &LCH 0±1 1 1.2589 2.8510 (4.55dBi) 0.00071 1 Pass EDR 8DPSK &LCH 3±1 4 2.5119 2.8510 (4.55dBi) 0.00143 1 Pass 2.4G WIFI &ANT1 802.11b&24 12 14±1 15 31.6228 2.8510 (4.55dBi) 0.0179 1 Pass 2.4G WIFI ANT2 802.11b&24 12 14±1 15 31.6228 2.8510 (4.55dBi) 0.0179 1 Pass 2.4G WIFI &ANT3 802.11b&24 12 14±1 15 31.6228 2.8510 (4.55dBi) 0.0179 1 Pass 2.4G WIFI &ANT4 802.11b&24 37 14±1 15 31.6228 2.8510 (4.55dBi) 0.0179 1 Pass 5.8G WIFI & ANT1 802.11a&57 85 11±1 12 15.8489 2.7102 (4.33dBi) 0.0086 1 Pass 5.8G WIFI & ANT2 802.11a&57 85 11±1 12 15.8489 2.7102 (4.33dBi) 0.0086 1 Pass 5.8G WIFI & ANT3 802.11a &5745 12±1 13 19.9526 2.7102 (4.33dBi) 0.01076 1 Pass 5.8G WIFI & ANT4 802.11a&57 85 11±1 12 15.8489 2.7102 (4.33dBi) 0.0086 1 Pass For the Max simultaneous transmission MPE: When a number of sources at different frequencies, and/or broadband sources, contribute to the total exposure, it becomes necessary to weigh each contribution relative to the MPE in accordance with the provisions of Table (A) and Table (B). To comply with the MPE, the fraction of the MPE in terms of E2, H2 (or power density) incurred within each frequency interval should be determined and the sum of all such fractions should not exceed unity. In order to ensure compliance with the MPE for a controlled environment, the sum of the ratios of the power density to the corresponding MPE should not exceed unity. That is BT+WIFI supported simultaneous transmission: EDR +2.4GWIFI MIMO: ∑MPE Ratio =0.00143+0.7=0.70143≤1, So passed. EDR +5GWIFI MIMO: ∑MPE Ratio =0.00143+0.04=0.04143≤1, So passed. Note: 2.4GWIFI and 5GWIFI do not support simultaneous transmission. Techn ology Tune up Produce power(dBm) Maximum Tune-up (dBm) Antenn a Gain(A NT 0/ANT 1) (numeri c) Power Density (S) (mW/ cm2) MP E Limi t (m W/c m2) ∑ MP E Rati o ∑ MP E Rati o Limi t Resu lt AN T 1 AN T 2 AN T 3 AN T 4 AN T 1 AN T 2 AN T 3 AN T 4 AN T 1 AN T 2 AN T 3 AN T 4 2.4 WIFI MIMO 14 ± 1 14 ± 1 14 ± 1 14 ± 1 15 15 15 15 2.8510 (4.55d Bi) 0.0 17 9 0.0 17 9 0.0 17 9 0.0 17 9 1 0.7 1 Pass Techn ology Tune up Produce power(dBm) Maximum Tune-up (dBm) Antenn a Gain(A NT 0/ANT 1) (numeri c) Power Density (S) (mW/ cm2) MP E Limi t (m W/c m2) ∑ MP E Rati o ∑ MP E Rati o Limi t Resu lt AN T 1 AN T 2 AN T 3 AN T 4 AN T 1 AN T 2 AN T 3 AN T 4 AN T 1 AN T 2 AN T 3 AN T 4 5.8WI FI MIMO 11 ± 1 11 ± 1 12 ± 1 11 ± 1 12 12 13 12 2.7102 (4.33d Bi) 0.0 08 6 0.0 08 6 0.0 10 76 0.0 08 6 1 0.04 1 Pass

地址：深圳市坪山新区六联社区顺康街 3 号 3 楼 http://www.sunshowsz.com/ 客户 : 品 名 规 格 DESCRIPTION: 料号 PART NO.： 客 户 料 号 CUS PART NO. ： 日期 D A T E： 商秀呈样签章 工 程 ENGINEERI NG DEPARTME NT 品 保 Q C DEPARTME NT 业 务 SALES DEPARTME NT 高龙张兰兰黄晓林 客户承认签章 工 程 ENGINEERI NG DEPARTME NT 品 保 Q C DEPARTME NT 采 购 PURCHASING DEP ARTMEN T ж 承认书一式三份，惠蒙贵司承认签章 APPROVAL SMA(公)-5DIB 双频可折叠天线 SMA(male)-5DIB dual frequency foldable antenna 2022-22-28 东莞市触美电子有限公司 5630-YB1080-00B 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街 3 号 3 楼 http://www.sunshowsz.com/ 电器技术参数 电 性 能 指 标 Electri cal Spe cifications 频率范围 2400-5800GHzFrequency Ra nge 2400-5800GHz 电压驻波比 ≤2.0 VSWR ≤2.0 输入阻抗 50 ΩInput Impedance 50 Ω 最大输入功率 50W Maximum Input Power 50W 机 械 指 标 Mechanical Specifications 天线颜色 黑色 Antenna ColorBLACK 接口形式 SMA（公针） Input connector SMA(J) 天线长度 192mmCable length192mm 工作温度 -40°C~+85°C Working Temperature -40°C~+85°C 工作湿度 20~80%Working Humidity 20~80% Environmental performance test: projectTest conditions specifications Storage environment Test temperature, humidity, and air pressure without specifying the following: 1. The temperature ranges from -30°C to +80°C 2. Relative humidity is 45%-85% 3. The air pressure is 86kpa-106kpa Electrical and mechanical properties are normal High and low temperature test Five cycles were performed between 70°C and 40°C, and then under normal conditions 1 to 2 hours, check the appearance quality. The dimensions shall meet the requirements and shall meet the requirements Mechanical and electrical properties Constant heat and humidity test The relative humidity was 95±3%, and the test temperature was 40°C. After 2H treatment, the electrical properties were measured within 5min after the samples were taken out, and the appearance quality of the samples was checked under normal conditions for 1-2H The dimensions shall meet the requirements and shall meet the requirements Mechanical and electrical properties Vibration test Vibration frequency range 10-55HZ, displacement amplitude: 0.35MM, acceleration amplitude: 50.0M/S, frequency sweep cycle: 30 times Electrical and mechanical properties are normal Drop off test 1M altitude in accordance with the vertical axis of the direction of free fall three times Electrical and mechanical properties are normal 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 天线网络测试： 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 15 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 18 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 线材规格： 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 插孔（socket contact ） 铍青铜（brylliumbrass） 镀硬金（Gold plated） SMA射频同轴连接器 RF COAXIAL CONNECTORS 主要技术特性（TECHNICAL SPECIFICATIONS）： 温度范围（Temp.range）： -55~+155°C 特性阻抗 （Impedance）： 50Ω 频率范围 （Frequency Range）： DC~12.4GHz 工作电压（Working Voltage）： 335Vmax（有效值） 耐压（Withstand Voltage）： 1000V rms（海平面最小值） 接触电阻（Contact resistance）： 内导体之间（Center Contact） ≤3m Ω 外导体之间（Outer Contact） ≤2m Ω 绝缘电阻（Insulationresistance）： ≥5000mΩ 电压驻波比（VSWR）： 直式（Right angle） ≤1.10 耐用性（Durability）： ≥500次 材料与涂覆（MATERIAL AND PLATING）： 壳体（Shell）： 黄铜 （Brass） 镀硬金（Gold plated） 插针（contact pin）： 黄铜 （brass） 镀硬金（Gold plated） 绝缘体（Insulator）： 聚四氟乙烯（PTFE） 压接套（Crimping suite）： 铜合金（Copper alloy） 镀金（Gold plated） O型密封件（O-ring sealing）： 硅橡胶（6146 silastic） 编号：1101 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 地址：深圳市坪山新区六联社区顺康街3号3楼 http://www.sunshowsz.com/ 包装规格： 产品料号：xxx 产品型号：xxx 一、标签要求： 需方xxx 供方xxxxx 物料编码xx 产品型号xx 数量/单XXXPCS出厂日期X年X月X日 备注/其他 二、装箱要求： 作业说明： 1.内包装： 产品XXpcs一袋，放入小PE袋； 2.外包装： XxPCS一箱； 3.注意事项： a．是否要增设隔板、珍珠棉； b．标签的帖附，如ROHS等； PE袋

Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB230418008RFX Report Tel: 4008-707- 283 Web: http://www.ctb-lab. net Pag e 1 of 98 TEST REPORT Compiled by: Reviewed by: Approved by: Chen Zheng Arron Liu Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Interactive Flat Panel FCC ID: 2AYJ4TT-XXV5 Trademark: TANGO Model Number: TT-75V5, TT-55V5, TT-65V5, TT-86V5, TT-98V5 Prepared For: Osborne Technologies Limited Address: Unit 14 Capitol Court, Capitol Park, Dodworth, Barnsley, South Yorkshire, United Kingdom Manufacturer: Osborne Technologies Limited Address: Unit 14 Capitol Court, Capitol Park, Dodworth, Barnsley, South Yorkshire, United Kingdom Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: Floor 1&2, Building A, No. 26 of Xinhe Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, China. Sample Received Date: Apr. 13, 2023 Sample tested Date: Apr. 13, 2023 to Apr. 18, 2023 Issue Date: Apr . 18, 2023 Report No.: CTB230418008RFX Test Standards 47 CFR Part 15 Subpart E Test Results PASS Remark: This is WIFI-5GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB230418008RFX Report Tel: 4008-707- 283 Web: http://www.ctb-lab. net Pag e 2 of 98 TABLE OF CONTENT Test Report Declaration Page 1. VERSION .......................................................................... 4 2. TEST SUMMARY ................................................................... 5 3. MEASUREMENT UNCERTAINTY ..................................................... 6 4. PRODUCT INFORMATION AND TEST SETUP .......................................... 7 4.1 Product Information ..................................................................... 7 4.2 Test Setup Configuration ............................................................... 8 4.3 Support Equipment .................................................................... 8 4.5 Test Mode ............................................................................ 9 4.6 Test Environment ...................................................................... 9 5. TEST FACILITY AND TEST INSTRUMENT USED ...................................... 10 5.1 Test Facility .......................................................................... 10 5.2 Test Instrument Used ................................................................. 10 6. AC POWER LINE CONDUCTED EMISSION ........................................... 12 6.1 Block Diagram Of Test Setup .......................................................... 12 6.2 Limit ................................................................................ 12 6.3 Test procedure ....................................................................... 12 6.4 Test Result .......................................................................... 14 7. RADIATED SPURIOUS EMISSIONS .................................................. 16 7.1 Block Diagram Of Test Setup .......................................................... 16 7.2 Limit ................................................................................ 17 7.3 Test procedure ....................................................................... 18 7.4 Test Result .......................................................................... 19 8. BAND EDGE ...................................................................... 27 8.1 Block Diagram Of Test Setup .......................................................... 27 8.2 Limit ................................................................................ 27 8.3 Test procedure ....................................................................... 27 8.4 Test Result .......................................................................... 28 9. CONDUCTED PEAK OUTPUT POWER ............................................... 36 9.1 Block Diagram Of Test Setup .......................................................... 36 9.2 Limit ................................................................................ 36 9.3 Test procedure ....................................................................... 37 10. EMISSION BANDWIDTH& OCCUPIED BANDWIDTH ................................... 50 10.1 Block Diagram Of Test Setup ......................................................... 50 10.2 Limits .............................................................................. 50 10.3 Test Procedure ...................................................................... 50 10.4 Test Results ........................................................................ 52 11. POWER SPECTRAL DENSITY ...................................................... 66 11.1 Block Diagram Of Test Setup ......................................................... 66 11.2 Limit ............................................................................... 66 11.3 Test procedure ...................................................................... 66 11.4 Test Result ......................................................................... 68 12. FREQUENCY STABILITY ........................................................... 81 12.1 Block Diagram Of Test Setup ......................................................... 81 12.2 Limit ............................................................................... 81 12.3 Test procedure .......................................…

Text truncated - open the document above for the full version.

Radiated Emission Below 1G Above 1G Conducted Emission