2AYLZ082833MRemote control

Remote control manual Match code: 1) Turn off the 2 bulbs by push switch (not remote control); 2) Remove one of the bulbs, then turn on another bulb by push switch, press "group 1 on" once as soon as possible within 3 seconds, the bulb will flash 3 times, this bulb is paired to "group 1" successfully. 3) Repeat step 1, put on the other unpaired bulb, then turn on the 2 bulbs by push switch, press "group 2 on" once as soon as possible within 3 seconds, the unpaired bulb will flash 3 times, this bulb is also paired to "group 2" successfully. Clear code: 1) Turn off the 2 bulbs by push switch (not remote control); 2) Turn on the 2 bulbs by push switch, within 3 seconds, press "group 1 on" 8 times continuously, the bulb of "group 1" will flash 5 times, code of this bulb is cleared successfully. 3) Repeat step 1, remove the cleared bulb, then turn on the other bulb by push switch, within 3 seconds, press "group 2 on" 8 times continuously, the bulb of "group 2" will flash 5 times, code of this bulb is cleared successfully. All ON Long press: 3 lights cutover All OFF Long press: nightlight Brightness + /Speed + Yellow light + /mode + White light + /Mode - Indicator Brightness - /Speed - 30 minutes timing off Group 1,2 RGB color (7 colors) RGB auto play (3 types) 60 minutes timing off Long press to exit RGB FCC WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ver3.0

SHENZHEN OMI LIGHTING CO.,LTD. Statement Product: Remote control FCC ID: 2AYLZ082833M Model: OMI-14KRGB, OMI-14KWY, OMI-12KWY . All models are all identical in interior structure, electrical circuits and components, and just model names and color are different for the marketing requirement. Your assistance on this matter is highly appreciated. Yours sincerely, signature : name / title : Xie Hai Yan / Manager Contact information / address: No. 47, 2 Lane, Jinxing 1 Street, Sansha Industrial Zone,Henglan Town,Zhongshan,China

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: SHENZHEN OMI LIGHTING CO.,LTD. Address: No. 47, 2 Lane, Jinxing 1 Street, Sansha Industrial Zone,Henglan Town,Zhongshan,China Product Name: Remote control Model Number: OMI-14KRGB, OMI-14KWY, OMI-12KWY FCC Identifier: 2AYLZ082833M We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xie Hai Yan Date: 2021.1.21 Title: Manager Signature of

C5266091_X10_Ed.1 1/1 SHENZHEN OMI LIGHTING CO.,LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2021-1-21 Subject: Request for Confidentiality FCC ID: 2AYLZ082833M To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Xie Hai Yan Title: Manager

Annex A External Photos Report No.: HK2012284078-E Page 1 of 3 Report No.: HK2012284078-E Page 2 of 3 Report No.: HK2012284078-E Page 3 of 3

FCC ID: 2AYLZ082833M

Annex B Internal Photos Report No.: HK2012284078-E Page 1 of 3 Report No.: HK2012284078-E Page 2 of 3 Antenna YM1149 RF1 Report No.: HK2012284078-E Page 3 of 3

Page 1 of 26 Report No.: HK2012284078-E FCC TEST REPORT Test report On Behalf of SHENZHEN OMI LIGHTING CO., LTD. For Remote control Model No.: OMI-14KRGB, OMI-14KWY, OMI-12KWY FCC ID: 2AYLZ082833M Prepared for : SHENZHEN OMI LIGHTING CO., LTD. No. 47, 2 Lane, Jinxing 1 Street, Sansha Industrial Zone, Henglan Town, Zhongshan, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Date of Test: Dec. 31, 2020 ~ Jan. 08, 2021 Date of Report: Jan. 08, 2021 Report Number: HK2012284078-E Page 2 of 26 Report No.: HK2012284078-E TEST RESULT CERTIFICATION Applicant’s name ................. : SHENZHEN OMI LIGHTING CO., LTD. Address ................................. : No. 47, 2 Lane, Jinxing 1 Street, Sansha Industrial Zone, Henglan Town, Zhongshan, China Manufacture's Name ............ : SHENZHEN OMI LIGHTING CO., LTD. Address ................................. : No. 47, 2 Lane, Jinxing 1 Street, Sansha Industrial Zone, Henglan Town, Zhongshan, China Product description Trade Mark: N/A Product name ........................... : Remote control Model and/or type reference : OMI-14KRGB, OMI-14KWY, OMI-12KWY Standards ............................. : FCC Rules and Regulations Part 15 Subpart C Section 15.249 ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Dec. 31, 2020 ~ Jan. 08, 2021 Date of Issue ........................................... : Jan. 08, 2021 Test Result .............................................. : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou ) Page 3 of 26 Report No.: HK2012284078-E Table of Contents Page 1 . TEST SUMMARY 5 2 . GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 Operation of EUT during testing 7 2.3 DESCRIPTION OF TEST SETUP 8 2.4 MEASUREMENT INSTRUMENTS LIST 9 3 . CONDUCTED EMISSIONS TEST 10 3.1 Conducted Power Line Emission Limit 10 3.2 Test Setup 10 3.3 Test Procedure 10 3.4 Test Result 11 4 RADIATED EMISSION TEST 12 4.1 Radiation Limit 12 4.2 Test Setup 12 4.3 Test Procedure 13 4.4 Test Result 13 5.1 Limits 19 5.2 Test Procedure 19 6 OCCUPIED BANDWIDTH MEASUREMENT 22 6.1 Test Setup 22 6.2 Test Procedure 22 6.3 Measurement Equipment Used 22 6.4 Test Result 22 7 ANTENNA REQUIREMENT 24 8 PHOTOGRAPH OF TEST 25 8.1 Radiated Emission 25 9 PHOTOS OF THE EUT 26 Page 4 of 26 Report No.: HK2012284078-E ** Modifited History ** Revison Description Issued Data Remark Revsion 1.0 Initial Test Report Release Jan. 08, 2021 Jason Zhou Page 5 of 26 Report No.: HK2012284078-E 1. TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS DESCRIPTION OF TEST RESULT CONDUCTED EMISSIONS TEST 15.207 N/A RADIATED EMISSION TEST 15.249(a) /15.209 COMPLIANT BAND EDGE 15.249(d)/15.205COMPLIANT OCCUPIED BANDWIDTH MEASUREMENT 15.215（c） COMPLIANT ANTENNA REQUIREMENT 15.203 COMPLIANT 1.2 TEST FACILITY Te s t F i r m ： Shenzhen HUAK Testing Technology Co., Ltd. Address ： 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China 1.3 MEASUREMENT UNCERTAINTY Measurement Uncertainty Conducted Emission Expanded Uncertainty =2.71dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.90dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz)= 3.90dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.28dB, k=2 Page 6 of 26 Report No.: HK2012284078-E 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Remote control Model Name OMI-14KRGB Serial Model OMI-14KWY, OMI-12KWY Model Difference All model’s the function, software and electric circuit are the same, only with a product color and model named different. Test sample model: OMI-14KRGB FCC ID 2AYLZ082833M Antenna Type Internal Antenna Antenna Gain 0dBi Operation frequency 2418-2450MHz Number of Channels 3CH Modulation Type GFSK Power Source DC 3V from battery Power Rating DC 3V from battery Page 7 of 26 Report No.: HK2012284078-E 2.1.1 Carrier Frequency of Channels Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 1 2418 2 2434 3 2450 2.2 Operation of EUT during testing Operating Mode The mode is used: Transmitting mode Low Channel: 2418MHz Middle Channel: 2434MHz High Channel: 2450MHz Page 8 of 26 Report No.: HK2012284078-E 2.3 DESCRIPTION OF TEST SETUP Operation of EUT during radiation below 1GHz and above 1GHz testing: PC information Model: TP00018A Input: 20V, 3.25A/4.5A The sample was placed (0.8m below 1GHz, 1.5m above 1GHz) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. The worst case is X position EUT Page 9 of 26 Report No.: HK2012284078-E 2.4 MEASUREMENT INSTRUMENTS LIST Item Equipment Manufacturer Model No.Serial No. Last Cal. Cal. Interval 1. L.I.S.N. Artificial Mains Network R&S ENV216 HKE-002 Jun. 18, 2020 1 Year 2. Receiver R&S ESR-7 HKE-010 Jun. 18, 2020 1 Year 3. RF automatic control unit Tonscend JS0806-2 HKE-060 Jun. 18, 2020 1 Year 4. Spectrum analyzer R&S FSP40 HKE-025 Jun. 18,…

Text truncated - open the document above for the full version.

FCC ID: 2AYLZ082833M