2AYO9-WFDCRFIFWFDC wireless interface

FREIGHT DOORS I CAR GATES I CAR ENCLOSURES TECHNICAL SUPPORT 1-800-787-5020 ext 275 THE PEELLE COMPANY ® Guide No. Date: 224-EN WIRELESS CONTROLLER INSTALLATION & INTERFACE GUIDE May 13 / 2021 FREIGHT DOORS I CAR GATES I CAR ENCLOSURES TECHNICAL SUPPORT 1-800-787-5020 ext 275 THE PEELLE COMPANY ® USING AS REPLACEMENT CONTROLLER Confirm software version on existing controllers See Parameter 80 If Parameter 80 is 18 or lower change Parameter 54 to 1 224-EN WIRELESS CONTROLLER INSTALLATION & INTERFACE GUIDE FREIGHT DOORS I CAR GATES I CAR ENCLOSURES TECHNICAL SUPPORT 1-800-787-5020 ext 275 THE PEELLE COMPANY ® Guide No. Date: 224-EN WIRELESS CONTROLLER INSTALLATION & INTERFACE GUIDE May 13 / 2021 Contents 1.0 SAFETY WARNING 1 2.0 LANDING DOOR CONTROLLER INSTALLATION 2 2.1 LANDING DOOR CONTROLLER MOUNTING 2 2.2 LANDING DOOR WIRING LAYOUT - STANDARD OPERATORS 3 2.3 LANDING DOOR WIRING LAYOUT - EXTRA HIGH TORQUE OPERATORS 4 2.4 LANDING DOOR POWER CONNECTIONS 5 2.5 LANDING DOOR ENCODER 6 2.6 LANDING DOOR OPERATORS - STANDARD OPERATORS 7 2.7 LANDING DOOR OPERATORS - EXTRA HIGH TORQUE 8 2.8 LANDING DOOR EMERGENCY UNLOCKING DEVICE (EUD) 9 2.9 LANDING DOOR ZONE SWITCH (ZNS) 10 2.10 LANDING DOOR HALL PUSHBUTTONS 11 2.11 LANDING DOOR LIGHT CURTAIN (OPTIONAL) 12 3.0 CAR DOOR (GATE) CONTROLLER INSTALLATION 13 3.1 CAR DOOR LOCATION AND WIRING LAYOUT 13 3.2 CAR DOOR POWER CONNECTIONS 14 3.3 CAR DOOR ENCODER 15 3.4 CAR DOOR (GATE) OPERATOR 16 3.5 RETIRING CAM MOTOR 17 3.6 CAR DOOR REVERSING EDGE (OPTIONAL) 18 3.7 WARNING BUZZER 19 4.0 COMMISSIONING 20 4.1 CAR DOOR 20 4.2 LANDING DOOR 21 4.3 LANDING AND CAR DOOR OPERATION AND TESTING 22 4.4 SEQUENCE OF OPERATION 22 4.5 POWER UP MODE / LOSS OF POWER 22 5.0 ELEVATOR CONTROLLER INTERFACE 23 5.1 ELEVATOR TO DOOR CONTROLLER INPUT CONNECTIONS 23 5.2 ELEVATOR TO DOOR CONTROLLER OUTPUT CONNECTIONS 24 5.3 LANDING AND CAR DOOR INTERLOCKING CIRCUITS 25 FREIGHT DOORS I CAR GATES I CAR ENCLOSURES TECHNICAL SUPPORT 1-800-787-5020 ext 275 THE PEELLE COMPANY ® Guide No. Date: 224-EN WIRELESS CONTROLLER INSTALLATION & INTERFACE GUIDE May 13 / 2021 6.0 CONTROLLER SETTINGS 26 6.1 DOOR MOTION PROFILES AND PARAMETERS 26 7.0 TROUBLESHOOTING 29 7.1 INDEPENDENT MODE 29 7.2 AUTOMATIC MODE 30 7.3 ELEVATOR INTERFACE OPERATION 31 7.4 ERROR CODES 32 7.5 LANDING DOOR LCD 33 7.6 CAR DOOR LCD 34 8.0 TECHNICAL SPECIFICATIONS 35 9.0 FCC/ISED DECLARATION 36 10.0 EC DECLARATION OF CONFORMITY 37 1 FREIGHT DOORS I CAR GATES I CAR ENCLOSURES TECHNICAL SUPPORT 1-800-787-5020 ext 275 THE PEELLE COMPANY ® Guide No. Date: 224-EN WIRELESS CONTROLLER INSTALLATION & INTERFACE GUIDE May 13 / 2021 Electrical Hazard Warning Symbol – Failure to observe this warning could result in electrical shock or electrocution. Operational Hazard Warning Symbol – Failure to observe this warning could result in dangerous or unsafe conditions. Installation Note: This product should be installed and serviced by a qualified elevator technician familiar with its operation and hazards involved. Proper safety procedures must be followed when working with this controller during installation and with control under power. Proper shielding and grounding of this product is necessary to reduce the emissions of radio frequency interference (RFI) which may adversely affect sensitive electronic equipment. Electrical Wiring: Wire controller in accordance with the National Electrical Code, Canadian Electrical Code, European Norms and/or any other local codes that apply. General Contractor Note: A separate fuse disconnect switch is required for the door controllers. See job specific wiring diagrams for disconnect and fuse requirements. 1.0 SAFETY WARNING Enclosure Conduit Connections TYPE 1, 4 & 4X (Indoor Use Only) CAUTION Non-metallic enclosure does not provide grounding between conduit connections. Use grounding bushing and jumping wires. WARNING Do not mount controller on or above a combustible surface. The conduit hubs are to be connected to the conduit before being connected to the enclosure. To maintain the environmental rating of this enclosure, install in any openings only listed or recognized conduit hubs with the same environmental ratings as required, in compliance with the installation instructions of the device. 53 T&B Conduit Fittings Rigid and Intermediate Metal Conduit Fittings Methods of Bonding and Grounding (continued)— Typical Installations Using Thomas & Betts Bonding and Grounding Wedge T&B Series 3651 Bonding & Grounding Wedge (1) T&B Series 142 Locknut (2)T&B Series 122 Metallic Bushing (3)T&B Series 3651 Bonding & Grounding Wedge (4)T&B Pressure (crimp type) Terminal Lug. Grounding electrode Conductor enclosure (Rigid Metal Conduit or Intermediate Metal Conduit) Service Enclosure Service Equipment Bonding Jumper Equipment Bonding Jumper Phase Conductors Grounding electrode conductor Threaded Rigid Metal Conduit or intermediate Rigid Metal Conduit Sheet Metal Box or Enclosure with unpunched concentric or eccentric rings remaining around knockout opening. Ground Bus Acceptable Method for Bonding Following (i)Service Equipment CEC Rule 10-614 (ii)Bonding for Circuits over 250 volts CEC Rule 10-614 (iii)Bonding in Hazardous Locations CEC Rule 18-074 When installed with a bonding jumper, acceptable method of bonding where unpunched rings remain around concentric or eccentric knockouts in sheet metal boxes or enclosures. [CEC Rule 10-614]. Suggested Specifications Bonding and Grounding Wedge (Series 3650) Bonding and Grounding Wedges installed to effectively bond terminating fitting or metal conduit to a cabinet, box, enclosure or an auxiliary gutter or to install bonding jumper around concentric or eccentric knockouts shall be of the type as manufactured by Thomas & Betts—Series 3650. Bonding and Grounding Wedge shall be of rugged bronze/tin plated or steel/electro-zinc plated. CONFITMRO_1a_fr.pdf 539/21/2011 10:15:19 AM ! 2 FREIGHT DOORS I CAR GATES I CAR ENCLOSURES TECHNICAL SUPPORT 1-800-787-5020 ext 275 THE PEEL…

Text truncated - open the document above for the full version.

Applicant/Grantee The Peelle Company FCC ID: 2AYO9-WFDCRFIF Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Metal shield is fitted Y 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Software modulates the data rates Y 3 The modular transmitter must have its own power supply regulation. Module contains a voltage regulator which supplies the RF Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Antenna is on PCB substrate, no external antenna used Y 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting Compliant, see test UL report. Y equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. Label is contained on exterior of device that the module is installed in. Y 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Statement is contained in the user manual which is submitted along with the application. Y 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured.

The Peelle Company, 34E. Main Street #372, Smithtown, NY 11787, USA, (631) 231 6000, www.peelledoor.com Date: 1/25/2021 UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 USA To whom it may concern: I, the undersigned, hereby authorize UL LLC to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; b) supply any and all information needed for the evaluation of the products for which certification is sought; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; f) use certification only to indicate that products are certified in conformity with specified standards; g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; The Peelle Company, 34E. Main Street #372, Smithtown, NY 11787, USA, (631) 231 6000, www.peelledoor.com i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where applicable, make provision for the participation of observers; j) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB’s or the FCC’s market surveillance requirements; l) keep a record of all complaints relating to product’s compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certification requirements. This authorization is valid until further written notice from the applicant. Sincerely Yours, Frank Leo Engineering Manager The Peelle Company

The Peelle Company, 34E. Main Street #372, Smithtown, NY 11787, USA, (631) 231 6000, www.peelledoor.com Date: 1/25/2021 Attn: FCC Office of Engineering and Technology / UL Verification Services TCB Subject: Request for Confidentiality FCC ID: 2AYO9-WFDCRFIF To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Theory of Operation • Antenna Specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the grant date: • External Photos • Internal Photos • Test Setup Photos • User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Frank Leo Engineering Manager The Peelle Company

Delivering Exceptional Elevating Experiences Office +1 (905) 846 4545 Fax +1 (905) 846 2161 Web www.peelledoor.com Representatives: Philadelphia and Washington D.C. • France • Germany • Singapore • United Kingdom The Peelle Company 34E. Main Street #372 Smithtown, NY 11787, USA The Peelle Company Ltd 195 Sandalwood Parkway W. Brampton ON, L7A 1J6, Canada April 16, 2021 UL LLC RTP Wireless Lab 2800 Perimeter Park Dr., Suite B Morrisville, NC 27560 USA RTP Main Site 12 Laboratory Dr. Research Triangle Park, NC 27709 USA Dear UL TCB / FCC / ISED Certification Bureau This application for modular approval is made on the understanding that use of the module will be limited to installation in host systems manufactured by Peelle or under our direct control as detailed in KDB 996369 D03 section 2.1 We understand that host systems will need to be labeled with Contains FCC ID: 2AYO9- WFDCRFIF / IC: 26868-WFDCRFIF when the module’s label is not visible. The systems will be always considered mobile or fixed devices (not portable) and the system manuals will include instructions for installing the system so that rf exposure requirements are met. Manuals shall also include the transmitter-related statements from FCC Part 15 and RSS GEN. All applicable system level testing and approvals for e.g. FCC Part 15 B and ICES-003 will be applied and confirmation of continued compliance with requirements related to the modular transmitter as detailed in KDB 996369 D04. Regards, Frank Leo Engineering Manager

PROJECT SPECS - PLEASE READ PANTONE Black PANTONE 109 Yellow Unwind Direction:Colours: 2 Note: Colours will vary depending on label stock, coatings, underlaid colours, and screen Note: All feed directions may not be available in some die 12 34 DEAR CLIENT Although we have thoroughly inspected this proof we request that it also be inspected by you and signed in the eld(s) below. The client is responsible for all nal information, size, colours, barcodes, and spelling. Therefore we will not be responsible for this information if it is approved incorrectly (this includes non-conforming barcodes). PLEASE notify us of any errors and corrections to this proof so we may correct them. We cannot proceed with your order without your signature on this proof. If responding by email, a printed copy will be kept on le with your order and represent your written approval. APPROVED APPROVED WITH CHANGES ADDITIONAL PROOF REQUIRED NAME: DATE: File: 3.95x6.6-54-080605-F-Etratech.eps Name: Allegra Print - Etratech Proofed: January 20, 2014 Label Size: 3.95" x 6.6"Revision: 4 DIELINE Does Not Print Material: White Polyester

NVLAP LAB CODE 200246-0 FCC Part 1 Subpart I FCC Part 2 Subpart J RSS 102 ISSUE 5 RF EXPOSURE REPORT FOR WIRELESS FREIGHT ELEVATOR DOOR CONTROLLER RF MAC MODULE MODEL NUMBER: 12025733B FCC ID: 2AYO9-WFDCRFIF IC: 26868-WFDCRFIF REPORT NUMBER: R13605195-E 1 ISSUE DATE: 2021-0 4-1 5 Prepared for GENTHERM 1047 COOKE BLVD. BURLINGTON, ONTARIO L7T 4A8 CANADA Prepared by UL LLC 12 LABORATORY DR. RESEARCH TRIANGLE PARK, NC 27709 USA TEL: (919) 549-1400 REPORT NO: R13605195-E1 DATE: 2021-04-15 FCC ID: 2AYO9-WFDCRFIF IC: 26868-WFDCRFIF Page 2 of 8 UL LLC 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. REVISION HISTORY Ver. Issue Date Revisions Revised By 1 2021-03-25 Initial Issue M. Antola 2 2021-04-15 Updated duty cycle information M. Antola REPORT NO: R13605195-E1 DATE: 2021-04-15 FCC ID: 2AYO9-WFDCRFIF IC: 26868-WFDCRFIF Page 3 of 8 UL LLC 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. TABLE OF CONTENTS REVISION HISTORY ............................................................................................................. 2 TABLE OF CONTENTS ......................................................................................................... 3 1. ATTESTATION OF TEST RESULTS ............................................................................... 4 2. TEST METHODOLOGY .................................................................................................. 5 3. REFERENCES ............................................................................................................... 5 4. FACILITIES AND ACCREDITATION ............................................................................... 5 5. DEVICE UNDER TEST ................................................................................................... 5 6. MAXIMUM PERMISSIBLE EXPOSURE (LIMITS AND EQUATIONS) .............................. 6 6.1. FCC RULES............................................................................................................. 6 6.2. EQUATIONS ............................................................................................................ 7 7. RF EXPOSURE RESULTS ............................................................................................. 8 END OF TEST REPORT ........................................................................................................ 8 REPORT NO: R13605195-E1 DATE: 2021-04-15 FCC ID: 2AYO9-WFDCRFIF IC: 26868-WFDCRFIF Page 4 of 8 UL LLC 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Gentherm 1047 Cooke Blvd. Burlington, Ontario L7T 4A8 Canada EUT DESCRIPTION: Wireless Freight Elevator Door Controller RF MAC Module MODEL: 12025733B APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies RSS 102 ISSUE 5 Complies UL LLC. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL LLC. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. government. Approved & Released For UL LLC by: Prepared By: Dan Coronia Mike Antola Operations Leader Staff Engineer ULVSI – Consumer Technology Division UL – Consumer Technology Division REPORT NO: R13605195-E1 DATE: 2021-04-15 FCC ID: 2AYO9-WFDCRFIF IC: 26868-WFDCRFIF Page 5 of 8 UL LLC 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. 2. TEST METHODOLOGY All calculations were made in accordance with FCC Parts 1.1310, 2.1091, KDB 447498 D01 v06, IEEE Std C95.1-2005, IEEE Std C95.3-2002, IC Safety Code 6 and RSS 102 Issue 5. 3. REFERENCES Output power, duty cycle, and Antenna gain data is excerpted from the applicable documentation provided by manufacturer. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 12 Laboratory Dr., Research Triangle Park, NC 27709, USA and 2800 Perimeter Park Dr., Suite B, Morrisville, NC 27560, USA. UL LLC (RTP) is accredited by NVLAP, Laboratory Code 200246-0. 5. DEVICE UNDER TEST The EUT is a RF MAC module for a wireless freight elevator door controller. Other details regarding the EUT are documented in the applicable test reports and product documentation. REPORT NO: R13605195-E1 DATE: 2021-04-15 FCC ID: 2AYO9-WFDCRFIF IC: 26868-WFDCRFIF Page 6 of 8 UL LLC 12 Laboratory Dr., RTP, NC 27709 TEL: (919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC. 6. MAXIMUM PERMISSIBLE EXPOSURE (LIMITS AND EQUATIONS) 6.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1…

Text truncated - open the document above for the full version.

NVLAP Lab code: 200246-0 TEST REPORT Report Number. : R13605195-E2 Applicant : Gentherm 1047 Cooke Blvd. Burlington, Ontario L7T 4A8 Canada Model : 12025733B FCC ID : 2AYO9-WFDCRFIF IC : 26868-WFDCRFIF EUT Description : Wireless Freight Elevator Door Controller RF MAC Module Test Standard(s) : FCC 47 CFR PART 15 SUBPART C ISED RSS-247 ISSUE 2 ISED RSS-GEN ISSUE 5 Date Of Issue: 2021-04-20 Prepared by: UL LLC 12 Laboratory Dr. Research Triangle Park, NC 27709 USA Tel: (919) 549-1400 REPORT NO: R13605195-E2 DATE: 2021-04-2 0 FCC ID:2AYO9-WFDCRFIF IC: 26868-WFDCRFIF Page 2 of 48 UL LLC 12 Laboratory Dr., RTP, NC 27709; USA TEL:(919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC REPORT REVISION HISTORY Rev. Issue Date Revisions Revised By V1 2021-03-25 Initial Issue Niklas Haydon V2 2021-04-20 Misc. editorial updates Mike Antola REPORT NO: R13605195-E2 DATE: 2021-04-2 0 FCC ID:2AYO9-WFDCRFIF IC: 26868-WFDCRFIF Page 3 of 48 UL LLC 12 Laboratory Dr., RTP, NC 27709; USA TEL:(919) 549-1400 This report shall not be reproduced except in full, without the written approval of UL LLC TABLE OF CONTENTS REPORT REVISION HISTORY ..................................................................................................2 TABLE OF CONTENTS .............................................................................................................3 1. ATTESTATION OF TEST RESULTS ..................................................................................5 2. TEST RESULTS SUMMARY ...............................................................................................6 3. TEST METHODOLOGY ......................................................................................................7 4. FACILITIES AND ACCREDITATION ..................................................................................7 5. DECISION RULES AND MEASUREMENT UNCERTAINTY ...............................................8 5.1. METROLOGICAL TRACEABILITY ...............................................................................8 5.2. DECISION RULES ........................................................................................................8 5.3. MEASUREMENT UNCERTAINTY ................................................................................8 5.4. SAMPLE CALCULATION .............................................................................................8 6. EQUIPMENT UNDER TEST ................................................................................................9 6.1. EUT DESCRIPTION .....................................................................................................9 6.2. MAXIMUM OUTPUT POWER .......................................................................................9 6.3. DESCRIPTION OF AVAILABLE ANTENNAS ...............................................................9 6.4. SOFTWARE AND FIRMWARE .....................................................................................9 6.5. WORST-CASE CONFIGURATION AND MODE ...........................................................9 6.6. DESCRIPTION OF TEST SETUP ...............................................................................10 7. MEASUREMENT METHOD...............................................................................................11 8. TEST AND MEASUREMENT EQUIPMENT ......................................................................12 9. ANTENNA PORT TEST RESULTS ...................................................................................14 9.1. ON TIME AND DUTY CYCLE .....................................................................................14 9.2. 99% BANDWIDTH ......................................................................................................15 9.2.1. 802.15.4 ...............................................................................................................16 9.3. 6 dB BANDWIDTH ......................................................................................................17 9.3.1. 802.15.4 ...............................................................................................................18 9.4. OUTPUT POWER .......................................................................................................19 9.4.1. 802.15.4 ...............................................................................................................19 9.5. AVERAGE POWER .........................................................................…

Text truncated - open the document above for the full version.