2AYOA-4009Nuance Audio Remote Plus

Luxottica Group S.p.A. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Luxottica Group S.p.A. Address: One Icon Foothill Ranch California United States Product Name: Nuance Audio Remote Plus FCC ID: 2AYOA-4009 Model: AAW0003EL 2.911(d)(5)(i) Equipment Type We, [Luxottica Group S.p.A.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • P rohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • I dentified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Jane Wang Date: 3/4/2026 Title and Company name: Director, Luxottica Group S.p.A. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Luxottica Group S.p.A. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Luxottica Group S.p.A. Address: One Icon Foothill Ranch California United States Product Name: Nuance Audio Remote Plus FCC ID: 2AYOA-4009 Model: AAW0003EL 2.911(d)(5)(ii) Applicant filing We, [Luxottica Group S.p.A.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Jane Wang Date: 3/4/2026 Title and Company name: Director, Luxottica Group S.p.A. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Luxottica Group S.p.A * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 3/2/2026 ATTN.: Reviewing Engineer FCC ID: 2AYOA-4009 FRN of Grantee: 0029716974 Per section 2.911(d)(7) of the FCC rules, Luxottica Group S.p.A (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Luxottica Group S.p.A. FCC Registration Number (FRN): 0029716974 U.S. Company Address: One lcon Foothill Ranch California United States Agent Name: Jane Wang Agent Email Address: [email protected] Tel：(949)981-3308 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed: Signed: Printed name: Jane Wang Title: Director Company Name: Luxottica Group S.p.A. Date:3/2/2026 Signed: Printed name: Jane Wang Title: Director Company Name: Luxottica Group S.p.A. Date:3/2/2026

Luxottica Group S.p.A. Letter of Authorization Company: Luxottica Group S.p.A. Address: One Icon Foothill Ranch California United States Product Name: Nuance Audio Remote Plus Model Number: AAW0003EL Product Description: Nuance Audio Remote Plus We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 3/4/2026 Name: Jane Wang Title: Director Company: Luxottica Group S.p.A.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 3/4/2026 SUBJECT: Supplier Compliance Declaration To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards,

Luxottica Group S.p.A. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 3/4/2026 Subject; Request for Confidentiality FCC ID: 2AYOA-4009 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued.

Laser engraving Artwork - JPN Market | Rialto Remote control Scale 1:1 | Tolerance: ±0.5 | Dimensions are in mm | Middle intensity Product name: font TT hoves (hairline), 6.5 pt 12.02.2026 Back door markings: font Roboto Condensed (thin), pt 4 FCC ID 2AYOA-4009 SN SM3SRCRB6G1S9V XXXX-XX-XX AAW0003EL Luxottica Group S.p.A. Italy Piazzale Cadorna 3, 20123 Milan # IC 26243-4009 CN Made in China +35°C (+95°F) -10°C (+14°F) 60% 20% 1013hPa 619hPa 0123 Nuance Audio Remote Plus 210-262943 R 9.3 2.1 2.1 22.7 10.4 4.4 10.2 10.2 18 3.6 4

Sushi TOWE Wireless Testing (Shenzhen) Co., Ltd. Report No.: TCEA25110110202 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. TEST REPORT Applicant: Luxottica Group S.p.A. EUT Description: Nuance Audio Remote Plus Model: AAW0003EL Brand: Nuance Audio Plus FCC ID: 2AYOA-4009 Standards: FCC 47 CFR Part 1.1307 FCC 47 CFR Part 2.1093 Date of Receipt: 2026/01/08 Date of Issue: 2026/02/09 TOWE. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. the results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of the model are manufactured with identical electrical and mechanical components. All sample tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. without written approval of TOWE, the test report shall not be reproduced except in full. Jim Huang Approved By: Carey Chen Reviewed By: Page 2 / 7 Report No.: TCEA25110110202 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Revision History Rev. Issue Date Description Revised by 01 2026/02/09 Original Carey Chen Page 3 / 7 Report No.: TCEA25110110202 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Table of Contents 1 General Description .............................................................................................................................. 4 1.1 Lab Information ...................................................................................................................... 4 1.1.1 Testing Location ................................................................................................................ 4 1.1.2 Test Facility / Accreditations ............................................................................................. 4 1.2 Client Information ................................................................................................................... 4 1.2.1 Applicant ............................................................................................................................ 4 1.2.2 Manufacturer ..................................................................................................................... 4 1.3 Product Information ............................................................................................................... 5 2 RF Exposure Compliance Requirement ............................................................................................. 6 2.1 Limit ......................................................................................................................................... 6 3 RF Exposure Results ............................................................................................................................ 7 Page 4 / 7 Report No.: TCEA25110110202 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. 1 General Description 1.1 Lab Information 1.1.1 Testing Location These measurements tests were conducted at the Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. facility located at F401 and F101, Building E, Hongwei Industrial Zone, Liuxian 3rd Road, Bao'an District, Shenzhen, China. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 Tel.: +86-755-27212361 Contact Email: [email protected] 1.1.2 Test Facility / Accreditations A2LA (Certificate Number: 7088.01) This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). FCC Designation No.: CN1353 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. has been recognized as an accredited testing laboratory. Designation Number: CN1353. ISED CAB identifier: CN0152 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0152 Company Number: 31000 1.2 Client Information 1.2.1 Applicant Applicant: Luxottica Group S.p.A. Address: One Icon Foothill Ranch California United States 1.2.2 Manufacturer Manufacturer: Luxottica Group S.p.A. Address: One Icon Foothill Ranch California United States Page 5 / 7 Report No.: TCEA25110110202 S…

Text truncated - open the document above for the full version.

S02G Antenna Specification Summary ITEMBluetooth ANT SPEC Model NameBluetooth Frequency (MHz) HorizontalVertical 240024502500 2 4 0 0 2400 2 4 5 0 2450 2 4 0 0 2500 Gain (dBi)-2.8-2.7-2.6-2.8-2.1-2.3 Max.Gain (dBi)-2.7-2.1 PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50Ω Antenna Length36mm ManufatureShenzhen Huatongxin Precision Hardware Co., Ltd. Manufature Address 401,Building 2, No.5 Xingfa Road, Junzibu Community, Guanlan Street, Longhua District, Shenzhen Antenna Photo & Length 36mm 16.3mm 10.5mm 34mm Horizontal:2400MHz/2450MHz/2500MHz Gain (dBi) MAX:-2,MIN:-27,Scale:5/div Vertical:2400MHz/2450MHz/2500MHz Gain (dBi) MAX:-2,MIN:-27,Scale:5/div

Sushi TOWE Wireless Testing (Shenzhen) Co., Ltd. Report No.: TCEA25110110201 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. TEST REPORT Applicant: Luxottica Group S.p.A. EUT Description: Nuance Audio Remote Plus Model: AAW0003EL Brand: Nuance Audio Plus FCC ID: 2AYOA-4009 Standards: FCC 47 CFR Part 15 Subpart C Date of Receipt: 2026/01/08 Date of Test: 2026/01/08 to 2026/02/06 Date of Issue: 2026/02/09 TOWE. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. the results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of the model are manufactured with identical electrical and mechanical components. All sample tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. without written approval of TOWE, the test report shall not be reproduced except in full. Jim Huang Approved By: Carey Chen Reviewed By: Page 2 / 68 Report No.: TCEA25110110201 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Revision History Rev. Issue Date Description Revised by 01 2026/02/09 Original Carey Chen Page 3 / 68 Report No.: TCEA25110110201 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Summary of Test Results Clause FCC Part Test Items Result 4.1 §15.203/15.247(b) Antenna Requirement PASS 4.2 §15.207 AC Power Line Conducted Emission N/A 4.3 §15.247 (b)(3) Output Power PASS 4.4 §15.247 (a)(2) Occupied Bandwidth Reporting purposes only 4.5 §15.247 (e) Power Spectral Density PASS 4.6 §15.247(d) Band Edge for Conducted Emissions PASS 4.7 §15.247(d) Spurious RF Conducted Emissions PASS 4.8 §15.205 §15.209 Radiated Spurious emissions and Band Edge PASS Test Method: ANSI C63.10:2020, KDB 558074 D01 15.247 Mesa Guidance v05r02. Remark: 1. Pass is EUT meets standard requirements. 2. N/A: Not applicable. Page 4 / 68 Report No.: TCEA25110110201 Sushi TOWE Wireless Testing(Shenzhen) Co., Ltd. Email: [email protected] Tel.: +86-755-27212361 TOWE-QP-15-F05 Rev.1.1 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from TOWE. Table of Contents 1 General Description .............................................................................................................................. 5 1.1 Lab Information ...................................................................................................................... 5 1.1.1 Testing Location ................................................................................................................ 5 1.1.2 Test Facility / Accreditations ............................................................................................. 5 1.2 Client Information ................................................................................................................... 5 1.2.1 Applicant ............................................................................................................................ 5 1.2.2 Manufacturer ..................................................................................................................... 5 1.3 Product Information ............................................................................................................... 6 2 Test Configuration ................................................................................................................................ 7 2.1 Test Channel ........................................................................................................................... 7 2.2 Worst-case configuration and Mode .................................................................................... 8 2.3 Support Unit used in test ....................................................................................................... 8 2.4 Test Environment ................................................................................................................... 8 2.5 Test RF Cable .......................................................................................................................... 8 2.6 Modifications .......................................................................................................................... 8 2.7 Test Setup Diagram ................................................................................................................ 9 2.7.1 Conducted Configuration .................................................................................................. 9 2.7.2 Radiated Configuration .................................…

Text truncated - open the document above for the full version.