
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Sheetnr.: 49.90.30.84 | REV: 3 BERG AirHive 6+ User manual Gebruikshandleiding Gebrauchsanweisung Mode d’emploi Brugermanual Instruktionsbok Bruksanvisningen Käyttöopas Manuale di istruzioni Manual de instrucciones Download the AirHive official app on the Apple App Store or Google Play Store Go to the BERG toys channel on for installation instruction video’s www.youtube.com/bergtoys 2 3 1 1x 1x1x 3 Download the AirHive official app on the Apple App Store or Google Play Store Go to the BERG toys channel on for installation instruction video’s www.youtube.com/bergtoys 2 3 1 1x 1x1x 4 5 3 2 1 4 6 3 21 4 1 Sec 7 3 21 4 1 Sec 2x 1x 5 2 Sec 67 2 Min 8 ENEN Warning: • The device is not recommended for use by children under 6 years of age • Children (under 12) may only use the product under the guidance of an adult. • Read instructions thoroughly and keep for future reference. • This device contains electrical equipment that could cause injury if not handled properly. • Do not attempt to replace the battery or open the enclosure or disassemble the device. Doing so can result in a safety hazard and will void the warranty. • Do not use the device if it is damaged. Substances in the device and its battery may harm the environment or cause injury if handled or disposed improperly. • Do not dispose the device in a fire. The battery could explode. • Do not expose the device to extremely high or low temperatures or heavy rain. • The device is splashproof only. Do not immerse in water. • Store the product in a dry and moisture free environment. • Keep a safe distance to other people and objects. Collision hazard. Use of 1 or more devices by several people within the same jumping area can cause serious injuries. • Usage of the device while under the influence of alcohol or drugs is prohibited. • Prolonged contact may contribute to skin irritation or allergies for some users. If you notice any skin irritation, remove your device. If symptoms persist longer than 2-3 days, consult your general practitioner. • Do not charge the device while it is wet. • Do not wear the device while charging it. • Do not wear your device too tight or too loose this may cause injuries. • Remove your device if it feels warm or hot. • Limit the time of continuous usage (make regular stops). • Remove your device after using. Caution: • Disposal of a battery in a fire or a hot oven, or (mechanically) crushing or cutting a battery can result in an explosion. • Leaving a battery in an environment with an extremely high temperature can cause an explosion or leakage of flammable liquid or gas. • A battery exposed to extremely low air pressure can cause an explosion or leakage of flammable liquid or gas. Cleaning instructions: Only use a clean damp cloth to clean the device. Do not use solvents, detergent, soap powder or hot water under any circumstances. Set up: • The operating frequency bands of this device are: 2.400 - 2.4835 GHz ISM band. • The maximum output power of this device is: 0 dBm. 9 ENEN Regulatory Information: Federal Communications Commission (FCC) Statement: This device complies with FCC part 15 Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. Declaration of Conformity with regard to the EU Radio Equipment Directive 2014/53/EU: BERG Toys B.V. is authorized to apply the CE mark on its product, thereby declaring conformity to the essential requirements and other relevant provisions of Directive 2014/53/EU and other applicable Directives. The complete Declaration of Conformity can be found at bergtoys.com/ media/wysiwyg/products/airhive/doc.pdf Disposal and recycling Information: The symbol on the device and its packaging signifies that this device must be disposed separately from the ordinary household wastes at its end of life because it contains a battery and is electronic equipment. For information about where to recycle contact your local waste disposal authority or the retailer where you bought the device. Warranty: The BERG AirHive is subject to a warranty period of 2 years. 10 NLNL Waarschuwing: • Het product wordt niet aanbevolen voor gebruik door kinderen jonger dan 6 jaar. • Kinderen (onder 12 jaar) mogen het product alleen gebruiken onder toezicht van een volwassen persoon. • Lees de gebruiksaanwijzing, en bewaar deze voor de toekomst. • Dit product bevat elektrische onderdelen die bij onjuist gebruik letsel kunnen veroorzaken. • Probeer niet om de batterij te vervangen, de behuizing te openen of het apparaat uit elkaar te halen. Hierdoor kan een gevaarlijke situatie ontstaan en vervalt de garantie. • Gebruik het ap…
Text truncated - open the document above for the full version.
FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: BERG Toys B.V. Address: Stevinlaan 2, 6716 WB City: Ede (GLD) Country: The Netherlands To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AYON-AIRHIVE Reference number: 2AYON-AIRHIVE Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: As the products is very innovative and therefore sensitive imitation we would like these materials to be treated as confidential up till product launch. Date: 27-05-2021 Name and signature of applicant: K. Berkhuizen Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043903 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZCR2104020439ET(SGS SZ No.:T52110250075EM) Applicant: BERG Toys B.V. Address of Applicant: P.O. Box 73 Ede 6710 BB Netherlands Manufacturer: BERG Toys B.V. Address of Manufacturer: P.O. Box 73 Ede 6710 BB Netherlands Equipment Under Test (EUT): EUT Name: BERG AirHive Model No.: 35.82.00.00 Requested Age Grading: 6+ Country of Origin: China Country of Destination: USA Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2021-04-08 Date of Test: 2021-04-15 to 2021-04-19 Date of Issue: 2021-04-20 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043903 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2021-04-20 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043903 Page: 3 of 6 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................ 5 4.3 TEST FACILITY .................................................................................................................................. 5 4.4 DEVIATION FROM STANDARDS ............................................................................................................ 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 5 5 SAR EVALUATION ................................................................................................................................. 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ........................................................................................ 6 5.1.1 Standard Requirement ................................................................................................................ 6 5.1.2 Limits .......................................................................................................................................... 6 5.1.3 EUT RF Exposure ....................................................................................................................... 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043903 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power supply: Rechargeable battery DC3.7V 100mAh,Charged by DC5V Cable(s): USB cable:25cm unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V4.2 Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Integral Antenna Gain: 0dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043903 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043903 Page: 6 of 6 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity…
Text truncated - open the document above for the full version.
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043902 Page: 1 of 48 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2104020439ET(SGS SZ No.:T52110250075EM) Applicant: BERG Toys B.V. Address of Applicant: P.O. Box 73 Ede 6710 BB Netherlands Manufacturer: BERG Toys B.V. Address of Manufacturer: P.O. Box 73 Ede 6710 BB Netherlands Equipment Under Test (EUT): EUT Name: BERG AirHive Model No.: 35.82.00.00 Requested Age Grading: 6+ Country of Origin: China Country of Destination: USA Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2021-04-08 Date of Test: 2021-04-15 to 2021-04-19 Date of Issue: 2021-04-20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043902 Page: 2 of 48 Revision Record Version Chapter Date Modifier Remark 01 2021-04-20 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043902 Page: 3 of 48 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZCR210402043902 Page: 4 of 48 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.4 TEST LOCATION ............................................................................................................................. 7 4.5 TEST FACILITY ............................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................11 6.1 ANTENNA REQUIREMENT ................................................................................................................11 6.1.1 Test Requirement: ..................................................................................................................11 6.1.2 Conclusion ..............................................................................................................................11 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................12 7.1 CONDUCTED PEAK OUTPUT POWER ................................................................................................12 7.1.1 E.U.T. Operation .....................................................................................................................12 7.1.2 Test Mode Description ............................................................................................................12 7.1.3 Test Setup Diagram ................................................................................................................13 7.1.4 Measurement Procedure and Data .........................................................................................13 7.2 MINIMUM 6DB BANDWIDTH .............................................................................................................14 7.2.1 E.U.T. Operation .....................................................................................................................14 7.2.2 Test Mode Description ............................................................................................................14 7.2.3 Test Setup Diagram ............................................…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 690.00 µW |
BERG Infinity Pods - Interactive training game
Equipment Class
DTS - Digital Transmission System