2AYPCAS1Address sensor unit

AS-1 READER/WRITER User Manual Rev.1.0 1/9 Rev.1.0 TAKUMA SEIKO CO., LTD Rev.1.0 TAKUMA SEIKO CO., LTD TEL +81-46-239-0755 FAX +81-46-239-0750 User Manual AS-1 READER/WRITER AS-1 READER/WRITER User Manual Rev.1.0 2 / 9 Rev.1.0 TAKUMA SEIKO CO., LTD Contents 1 Introduction ........................................................................................................................................... 3 2 Appearance............................................................................................................................................. 3 3 Specification ........................................................................................................................................... 3 4 Part names ............................................................................................................................................. 4 4.1 AS-1 READER .................................................................................................................................... 4 4.2 AS-1 WRITER .................................................................................................................................... 4 5 Interface ................................................................................................................................................. 5 5.1 AS-1 READER .................................................................................................................................... 5 5.2 AS-1 WRITER .................................................................................................................................... 6 6 Operation ............................................................................................................................................... 7 6.1 AS-1 READER .................................................................................................................................... 7 6.2 AS-1 WRITER .................................................................................................................................... 7 7 REGULATORY COMPLIANCE INFORMATION ................................................................................ 9 8 Revision History ..................................................................................................................................... 9 AS-1 READER/WRITER User Manual Rev.1.0 3 / 9 Rev.1.0 TAKUMA SEIKO CO., LTD 1 Introduction This address sensor unit (AS-1) is a RFID low-frequency (LF) 134.2kHz reader/writer unit for address tag for AGV (Automated Guided Vehicle) with internal loop antenna. Address tags are used by the AGV to determine its position while driving. AS-1 has two types of the functions by factory default, AS-1 READER is the RFID reader function, AS-1 WRITER is the RFID writer function. 2 Appearance The appearance of AS-1 WRITER is almost the same as above. 3 Specification Compliant : ISO 11784/11785 134.2kHz RFID ID Tag type : RI-TRP-WR3P-30 (23mm Glass), RI-TRP-WR2B-30 (32mm Glass) Dimension : 88mm (W), 73mm (D), 27mm (H) Weight : 100g Voltage : DC +12V Current : 0.5A AS-1 READER front view AS-1 READER back view AS-1 READER/WRITER User Manual Rev.1.0 4 / 9 Rev.1.0 TAKUMA SEIKO CO., LTD 4 Part names 4.1 AS-1 READER 4.2 AS-1 WRITER CN1 CN1 CN4 AS-1 READER/WRITER User Manual Rev.1.0 5 / 9 Rev.1.0 TAKUMA SEIKO CO., LTD 5 Interface 5.1 AS-1 READER CN1 (JST B12B-PH-K-S) Pin No. Pin Name Function Description 1 GND - Ground 2 DC +12V Power 3 /Stop I RF output stop signal to sleep (L: Stop mode) 4 /Clock O Data enable signal (100msec) for Data 5 /D7 O Data bit 7 6 /D6 O Data bit 6 7 /D5 O Data bit 5 8 /D4 O Data bit 4 9 /D3 O Data bit 3 10 /D2 O Data bit 2 11 /D1 O Data bit 1 12 /D0 O Data bit 0 AS-1 READER/WRITER User Manual Rev.1.0 6 / 9 Rev.1.0 TAKUMA SEIKO CO., LTD 5.2 AS-1 WRITER CN1 (JST B12B-PH-K-S) Pin No. Pin Name Function Description 1 GND - 2 DC +12V Power 3 NA - 4 /OKT O Execute done signal for EXE LED 5 DB7 O Data bit 7 for LCD (1602) module 6 DB6 O Data bit 6 for LCD (1602) module 7 DB5 O Data bit 5 for LCD (1602) module 8 DB4 O Data bit 4 for LCD (1602) module 9 BL O Back Light enable for LCD (1602) module 10 W/R I Write/Read switch signal (L: Write Mode) 11 RS O Register Select signal for LCD (1602) module 12 STB O Strobe signal for LCD (1602) module CN4 (JST B6B-PH-K-S) Pin No. Pin Name Function Description 1 Battery I A/D converter input for battery voltage check 2 /CLEAR I LCD clear switch button 3 /UP I UP switch button 4 /X10 I X10 switch button 5 /DOWN I DOWN switch button 6 /EXE I EXE switch button AS-1 READER/WRITER User Manual Rev.1.0 7 / 9 Rev.1.0 TAKUMA SEIKO CO., LTD 6 Operation 6.1 AS-1 READER Normal operation: - Turn on the power. - AS-1 READER can be read ID value (D7-D0) from RFID tag with /Clock = L. - User system will be known an ID value by /Clock = L 100msec width. Stop mode: - AS-1 READER can be entered stop mode (low power consumption) by /Stop = L. - Recommendation: If the AGV is not moving, set Stop mode (/Stop = L). 6.2 AS-1 WRITER Write operation: - Turn on the power. - Put AS-1 WRITER above the ID tag you want to write. - Set R/W switch to WRITE side. - Press the CLEAR, UP, X10, DOWN button and select the number you want to write ID address number. CLEAR : ID write address to “000”. UP : ID write address to 1 increase. DOWN : ID write address to 1 decrease. X10 : Hold down this button and press UP button then ID write address to 10 increase. (DOWN is 10 decrease) - Confirm WrADRS: xxx “OK” display by EXE button. If writing was succeeded, EXE LED will light 100msec. If writing was failed, LCD display will present Wr ADRS:xxx “NG” . ― ― ― Write mode ― ― ― Wr ADRS: xxx AS-1 READER/WRITER User Manual Rev.1.0 8 / 9 Rev.1.0 TAKUMA SEIKO CO., LTD Read operation: - Turn on the power. - Put AS-1 WRITER above the ID tag you want to read. - Set R/W switch to READ side. - Press the EXE button. - If reading was succeeded, ID address number will pres…

Text truncated - open the document above for the full version.

AS-1 READER User Manual Rev.1.0 1/6 Rev.1.0 TAKUMA SEIKO CO., LTD Rev.1.0 TAKUMA SEIKO CO., LTD TEL +81-46-239-0755 FAX +81-46-239-0750 User Manual AS-1 READER AS-1 READER User Manual Rev.1.0 2 / 6 Rev.1.0 TAKUMA SEIKO CO., LTD Contents 1 Introduction ........................................................................................................................................... 3 2 Appearance............................................................................................................................................. 3 3 Specification ........................................................................................................................................... 3 4 Part names ............................................................................................................................................. 4 5 Interface ................................................................................................................................................. 4 6 Operation ............................................................................................................................................... 5 7 REGULATORY COMPLIANCE INFORMATION ................................................................................ 6 8 Revision History ..................................................................................................................................... 6 AS-1 READER User Manual Rev.1.0 3 / 6 Rev.1.0 TAKUMA SEIKO CO., LTD 1 Introduction This address sensor unit (AS-1) is an RFID low-frequency (LF) 134.2kHz reader/writer unit for address tag for AGV (Automated Guided Vehicle) system with internal loop antenna. Address tags are used by the AGV to determine its position while driving. AS-1 has two types of the functions by factory default, AS-1 READER is an RFID reader function for use with AGV, AS-1 WRITER is an RFID writer function for writing an ID to a tag. This user manual describes the AS1 READER unit. 2 Appearance * The appearance of AS-1 WRITER is almost the same as above. 3 Specification Compliant : ISO 11784/11785 134.2kHz RFID ID Tag type : RI-TRP-WR3P-30 (23mm Glass), RI-TRP-WR2B-30 (32mm Glass) Dimension : 88mm (W), 73mm (D), 27mm (H) Weight : 100g Voltage : DC +12V Current : 0.5A AS-1 READER front view AS-1 READER back view AS-1 READER User Manual Rev.1.0 4 / 6 Rev.1.0 TAKUMA SEIKO CO., LTD 4 Part names 5 Interface CN1 (JST B12B-PH-K-S) Pin No. Pin Name Function Description 1 GND - Ground 2 DC +12V Power 3 /Stop I RF output stop signal to sleep (L: Stop mode) 4 /Clock O Data enable signal (100msec) for Data 5 /D7 O Data bit 7 6 /D6 O Data bit 6 7 /D5 O Data bit 5 8 /D4 O Data bit 4 9 /D3 O Data bit 3 10 /D2 O Data bit 2 11 /D1 O Data bit 1 12 /D0 O Data bit 0 CN1 AS-1 READER User Manual Rev.1.0 5 / 6 Rev.1.0 TAKUMA SEIKO CO., LTD 6 Operation Normal operation: - Turn on the power. - AS-1 READER can be read ID value (D7-D0) from RFID tag with /Clock = L. - User system will be known an ID value by /Clock = L 100msec width. Stop mode: - AS-1 READER can be entered stop mode (low power consumption) by /Stop = L. - Recommendation: If the AGV is not moving, set Stop mode (/Stop = L). AS-1 READER User Manual Rev.1.0 6 / 6 Rev.1.0 TAKUMA SEIKO CO., LTD 7 REGULATORY COMPLIANCE INFORMATION Product Name: Address sensor unit Model Name : AS-1 READER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TOMITA U.S.A INC. (HEADQUARTERS) 7801 Corporate Blvd. Ste. G, Plain City, OH. 43064 U.S.A. TEL：1-614-873-6509 FAX：1-614-873-6806 FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 8 Revision History Rev. Description 1.00 1 st release

AS-1 WRITER User Manual Rev.1.0 1/8 Rev.1.0 TAKUMA SEIKO CO., LTD Rev.1.0 TAKUMA SEIKO CO., LTD TEL +81-46-239-0755 FAX +81-46-239-0750 User Manual AS-1 WRITER AS-1 WRITER User Manual Rev.1.0 2 / 8 Rev.1.0 TAKUMA SEIKO CO., LTD Contents 1 Introduction ........................................................................................................................................... 3 2 Appearance............................................................................................................................................. 3 3 Specification ........................................................................................................................................... 3 4 Part names ............................................................................................................................................. 4 5 Interface ................................................................................................................................................. 5 6 Operation ............................................................................................................................................... 6 7 REGULATORY COMPLIANCE INFORMATION ................................................................................ 8 8 Revision History ..................................................................................................................................... 8 AS-1 WRITER User Manual Rev.1.0 3 / 8 Rev.1.0 TAKUMA SEIKO CO., LTD 1 Introduction This address sensor unit (AS-1) is an RFID low-frequency (LF) 134.2kHz reader/writer unit for address tag for AGV (Automated Guided Vehicle) system with internal loop antenna. Address tags are used by the AGV to determine its position while driving. AS-1 has two types of the functions by factory default, AS-1 READER is an RFID reader function for use with AGV, AS-1 WRITER is an RFID writer function for writing an ID to a tag. This user manual describes the AS1 WRITER unit. 2 Appearance * The appearance of AS-1 READER is almost the same as above. 3 Specification Compliant : ISO 11784/11785 134.2kHz RFID ID Tag type : RI-TRP-WR3P-30 (23mm Glass), RI-TRP-WR2B-30 (32mm Glass) Dimension : 88mm (W), 73mm (D), 27mm (H) Weight : 100g Voltage : DC +12V Current : 0.5A AS-1 WRITER front view AS-1 WRITER back view AS-1 WRITER User Manual Rev.1.0 4 / 8 Rev.1.0 TAKUMA SEIKO CO., LTD 4 Part names CN1 CN4 AS-1 WRITER User Manual Rev.1.0 5 / 8 Rev.1.0 TAKUMA SEIKO CO., LTD 5 Interface CN1 (JST B12B-PH-K-S) Pin No. Pin Name Function Description 1 GND - 2 DC +12V Power 3 NA - 4 /OKT O Execute done signal for EXE LED 5 DB7 O Data bit 7 for LCD (1602) module 6 DB6 O Data bit 6 for LCD (1602) module 7 DB5 O Data bit 5 for LCD (1602) module 8 DB4 O Data bit 4 for LCD (1602) module 9 BL O Back Light enable for LCD (1602) module 10 W/R I Write/Read switch signal (L: Write Mode) 11 RS O Register Select signal for LCD (1602) module 12 STB O Strobe signal for LCD (1602) module CN4 (JST B6B-PH-K-S) Pin No. Pin Name Function Description 1 Battery I A/D converter input for battery voltage check 2 /CLEAR I LCD clear switch button 3 /UP I UP switch button 4 /X10 I X10 switch button 5 /DOWN I DOWN switch button 6 /EXE I EXE switch button AS-1 WRITER User Manual Rev.1.0 6 / 8 Rev.1.0 TAKUMA SEIKO CO., LTD 6 Operation Write operation: - Turn on the power. - Put AS-1 WRITER above the ID tag you want to write. - Set R/W switch to WRITE side. - Press the CLEAR, UP, X10, DOWN button and select the number you want to write ID address number. CLEAR : ID write address to “000”. UP : ID write address to 1 increase. DOWN : ID write address to 1 decrease. X10 : Hold down this button and press UP button then ID write address to 10 increase. (DOWN is 10 decrease) - Confirm WrADRS: xxx “OK” display by EXE button. If writing was succeeded, EXE LED will light 100msec. If writing was failed, LCD display will present Wr ADRS:xxx “NG” . ― ― ― Write mode ― ― ― Wr ADRS: xxx AS-1 WRITER User Manual Rev.1.0 7 / 8 Rev.1.0 TAKUMA SEIKO CO., LTD Read operation: - Turn on the power. - Put AS-1 WRITER above the ID tag you want to read. - Set R/W switch to READ side. - Press the EXE button. - If reading was succeeded, ID address number will present on LCD display. If reading was succeeded, EXE LED will light 100msec. If reading was failed, LCD display will present Rd ADRS: xxx . During read operation, CLEAR, UP, X10, DOWN button disabled. Other: - If Battery voltage check function finds low battery voltage situation will display Low Battery! . - LCD backlight will turn off automatically if no any buttons pressing during in a few seconds. ― ― ― Read mode ― ― ― Rd ADRS: xxx AS-1 WRITER User Manual Rev.1.0 8 / 8 Rev.1.0 TAKUMA SEIKO CO., LTD 7 REGULATORY COMPLIANCE INFORMATION Product Name: Address sensor unit Model Name : AS-1 WRITER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TOMITA U.S.A INC. (HEADQUARTERS) 7801 Corporate Blvd. Ste. G, Plain City, OH. 43064 U.S.A. TEL：1-614-873-6509 FAX：1-614-873-6806 FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful …

Text truncated - open the document above for the full version.

Label Drawing Font size : 1.4mm or more Label Layout Drawing AS-1 READER AS-1 WRITER

Reader

Writer

Test report No. : 13534936S Page : 1 of 21 Issued date : March 16, 2021 FCC ID : 2AYPCAS1 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Report Cover Page - 13-EM-F0429 Issue # 17.0 CERTIFICATE 1266.03 RADIO TEST REPORT Test Report No. : 13534936S Applicant : TAKUMA SEIKO CO., LTD. Type of EUT : Address sensor unit Model Number of EUT : AS1 READER, AS1 WRITER FCC ID : 2AYPCAS1 Test regulation : FCC Part 15 Subpart C: 2020 Test Result : Complied (Refer to SECTION 3.2) 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above re gulation. 4. The test results in this test report are traceable to the national or international standards. 5. This test report must not be used by the customer to claim product certification, approval, or endorsement by the A2LA accreditation bod y. 6. This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable) 7. The all test items in this test report are conducted b y UL Japan, Inc. Shonan EMC Lab. 8. The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan has been accredited. 9. The information provided from the customer for this report is identified in SECTION 1. Date of test: November 26, 2020 Representative test engineer: Shiro Kobayashi Engineer Consumer Technology Division Approved by: Hikaru Shirasawa Engineer Consumer Technology Division The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan. There is no testing item of "Non-accreditation". Test report No. : 13534936S Page : 2 of 21 Issued date : March 16, 2021 FCC ID : 2AYPCAS1 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 REVISION HISTORY Original Test Report No.: 13534936S Revision Test report No. Date Page revised Contents - (Original) 13534936S March 16, 2021 - - Test report No. : 13534936S Page : 3 of 21 Issued date : March 16, 2021 FCC ID : 2AYPCAS1 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation MCS Modulation and Coding Scheme AC Alternating Current MRA Mutual Recognition Arrangement AFH Adaptive Frequency Hopping N/A Not Applicable AM Amplitude Modulation NIST National Institute of Standards and Technology Amp, AMP Amplifier NS No signal detect. ANSI American National Standards Institute NSA Normalized Site Attenuation Ant, ANT Antenna NVLAP National Voluntary Laboratory Accreditation Program AP Access Point OBW Occupied Band Width ASK Amplitude Shift Keying OFDM Orthogonal Frequency Division Multiplexing Atten., ATT Attenuator P/M Power meter AV Average PCB Printed Circuit Board BPSK Binary Phase-Shift Keying PER Packet Error Rate BR Bluetooth Basic Rate PHY Physical Layer BT Bluetooth PK Peak BT LE Bluetooth Low Energy PK/w Peak with duty factor BW BandWidth PN Pseudo random Noise Cal Int Calibration Interval PRBS Pseudo-Random Bit Sequence CCK Complementary Code Keying PSD Power Spectral Density Ch., CH Channel QAM Quadrature Amplitude Modulation CISPR Comite International Special des Perturbations Radioelectriques QP Quasi-Peak CW Continuous Wave QPSK Quadri-Phase Shift Keying DBPSK Differential BPSK RBW Resolution Band Width DC Direct Current RDS Radio Data System D-factor Distance factor RE Radio Equipment DFS Dynamic Frequency Selection RF Radio Frequency DQPSK Differential QPSK RMS Root Mean Square DSSS Direct Sequence Spread Spectrum RSS Radio Standards Specifications EDR Enhanced Data Rate Rx Receiving EIRP, e.i.r.p. Equivalent Isotropically Radiated Power SA, S/A Spectrum Analyzer EMC ElectroMagnetic Compatibility SG Signal Generator EMI ElectroMagnetic Interference SVSWR Site-Voltage Standing Wave Ratio EN European Norm TR Test Receiver ERP, e.r.p. Effective Radiated Power Tx Transmitting EU European Union VBW Video BandWidth EUT Equipment Under Test Vert. Vertical Fac. Factor WLAN Wireless LAN FCC Federal Communications Commission FHSS Frequency Hopping Spread Spectrum FM Frequency Modulation Freq. Frequency FSK Frequency Shift Keying GFSK Gaussian Frequency-Shift Keying GNSS Global Navigation Satellite System GPS Global Positioning System Hori. Horizontal ICES Interference-Causing Equipment Standard IEC International Electrotechnical Commission IEEE Institute of Electrical and Electronics Engineers IF Intermediate Frequency ILAC International Laboratory Accreditation Conference ISED Innovation, Science and Economic Development Canada ISO International Organization for Standardization JAB Japan Accreditation Board LAN Local Area Network LIMS Laboratory Information Management System Test report No. : 13534936S Page : 4 of 21 Issued date : March 16, 2021 FCC ID : 2AYPCAS1 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 CONTENTS PAGE SECTION 1: Customer information .................................................................................................... 5 SECTION 2: Equipment under test (EUT) ......................................................................................... 5 SECTION 3: Test specification, procedures & results ....................................................................... 6 SECTION 4: SECTION 4: Operation of EUT during testing ........................................................ 8 SECTION 5: Radiated emission (Fu…

Text truncated - open the document above for the full version.

Test report No. : 13534936S Page : 19 of 21 Issued date : March 16, 2021 FCC ID : 2AYPCAS1 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 APPENDIX 3: Photographs of test setup Radiated Spurious Emission Model: AS-1 READER Front Rear (Below 30 MHz) Rear (Above 30 MHz) Test report No. : 13534936S Page : 20 of 21 Issued date : March 16, 2021 FCC ID : 2AYPCAS1 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Model: AS-1 WRITER Front Rear (Below 30 MHz) Rear (Above 30 MHz) Test report No. : 13534936S Page : 21 of 21 Issued date : March 16, 2021 FCC ID : 2AYPCAS1 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Tag used for the test as representative End of Report