2AYRG-RX3030-12WLED Recessed Luminaires

FCC Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: -Reorient the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

DATE : 2021-01-27 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123- 128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Zhongshan rixiao Photoelectric Technology Co., Ltd and No.4-1, South Huatai East Road, caosan Pioneer Park, Guzhen town, Zhongshan City, Guang Dong Province, China Signature: Name: Jin Chen Title: Manager Company: Zhongshan rixiao Photoelectric Technology Co., Ltd

Zhongshan rixiao Photoelectric Technology Co., Ltd DATE : 2021-01-27 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AYRG-RX3030-12W Product Name: LED Recessed Luminaires Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) Schematics Block diagram Operation description BOM These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name: Jin Chen Title: Manager Company: Zhongshan rixiao Photoelectric Technology Co., Ltd

FCC Label and Location Pressure-sensitive printed labels Size: 40mm*13mm Proposed Label Location on EUT Label location FCC ID: 2AYRG-RX3030-12W Model No.: RX3030-12W This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation FCC Label

Global United Technology Services Co., Ltd. Report No.: GTS202101000024F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 17 TEST REPORT Applicant: Zhongshan rixiao Photoelectric Technology Co., Ltd Address of Applicant: No.4-1, South Huatai East Road, caosan Pioneer Park, Guzhen town, Zhongshan City, Guang Dong Province, China Manufacturer: Zhongshan rixiao Photoelectric Technology Co., Ltd Address of Manufacturer: No.4-1, South Huatai East Road, caosan Pioneer Park, Guzhen town, Zhongshan City, Guang Dong Province, China Equipment Under Test (EUT) Product Name: LED Recessed Luminaires Model No.: RX3030-12W FCC ID: 2AYRG-RX3030-12W Applicable standards: FCC CFR Title 47 Part 15 Subpart B Date of sample receipt: January 06, 2021 Date of Test: January 06- 19, 2021 Date of report issued: January 19, 2021 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202101000024F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 17 2 Version Version No. Date Description 00 January 19, 2021 Original Prepared by: Date: January 19, 2021 Project Engineer Reviewed by: Date: January 19, 2021 Reviewer Report No.: GTS202101000024F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 17 3 Contents 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE AND TEST VOLTAGE .......................................................................................................... 5 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 5 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 5 5.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 5.6 TEST FACILITY .................................................................................................................................... 5 5.7 TEST LOCATION .................................................................................................................................. 5 6 TEST INSTRUMENTS LIST ..................................................................................................................... 6 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 7 7.1 RADIATED EMISSION ........................................................................................................................... 7 7.2 CONDUCTED EMISSIONS ................................................................................................................... 10 8 TEST SETUP PHOTO ............................................................................................................................ 13 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 14 Report No.: GTS202101000024F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 17 4 Test Summary Test Item Test Requirement Test Method Class / Severity Result Conducted Emission FCC Part15.107 ANSI C63.4 Class B PASS Radiated Emissions # FCC Part15.109 ANSI C63.4 Class B PASS Remark: 1. Pass: The EUT complies with the essential requirements in the standard. 2. # Refer to FCC Part 15.33 (b)(1) conditional testing procedure : The highest frequency generated or used in the EUT Test frequency range of Radiated emission <108MHz 30MHz ~ 1GHz 108MHz ~ 500MHz 30MHz ~ 2GHz 500MHz ~ 1GHz 30MHz ~ 5GHz >1GHz 30MHz ~ 5th harmonic of the highest frequency or 40 GHz, whichever is lower. The highest frequency of the internal sources of the EUT is less than 108MHz. Report No.: GTS202101000024F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 17 5 General Information 5.1 General Description of EUT Product Name: LED Recessed Luminaires Model No.: RX3030-12W Power supply: 120V~, 60Hz, 12W , 0.11…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission