2AYT5100146663onn. 12.1 Tablet Pro

V02072023 Manufacturers Letterhead Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024/07/15 Ref: Attestation Statement Part 2.911(d)(7) Filing FCC ID:2AYT5100146663 Hefei BOE Vision-electronic Technology Co.,Ltd. certifies that, as of the dates of this application, Americas Compliance Consulting LLC dba iCertifi “iCertifi” is our designated U.S. agent for service of process for the above referenced FCC ID. Hefei BOE Vision-electronic Technology Co.,Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission-related proceeding involving the equipment. iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance consulting, LLC dba iCertifi FCC FRN: 0033399411 Address: 2445 NE Division Street, Suite 202 Bend, OR 97703 United States Contact Person: Paul Preston Tel: 866-885-4575 Email: [email protected] Sincerely, Hefei BOE Vision-electronic Technology Co.,Ltd. FRN:0030496814 Americas Compliance Consulting LLC dba iCertifi Tiffany Tang Paul Preston Signature

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 Hefei BOE Vision-electronic Technology Co.,Ltd. Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: Hefei BOE Vision-electronic Technology Co.,Ltd. FCC ID: 2AYT5100146663 To whom it may concern, [Hefei BOE Vision-electronic Technology Co.,Ltd.] (“Applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant [is not] identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________ Tiffany Tang Senior Certification Manager Hefei BOE Vision-electronic Technology Co.,Ltd. 2024-06-06

(Hefei BOE Vision-electronic Technology Co.,Ltd.) [2024-06-06] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement (Hefei BOE Vision-electronic Technology Co.,Ltd.) FCC ID: 2AYT5100146663 To Whom It May Concern: We, (Hefei BOE Vision-electronic Technology Co.,Ltd.), hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2AYT5100146663 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is 2024-06-06. The Limited Agency Agreement expires on 2025-06-06, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Tiffany Tang Senior Certification Manager

1(2) [Hefei BOE Vision-electronic Technology Co.,Ltd.] Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2AYT5100146663 To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] Schematics Block Diagrams Operational Description Tune-up Procedure Parts List Internal Photos (see note) Users Manual (see note) Note 1: Internal Photos may be held confidential 1) if the circuit board or internal components are not accessible to users. For example, it is acceptable if the circuit board is enclosed in epoxy. 2) Also, it is acceptable if the device is not accessible to the public, for example, a device mounted on the top of a large tower (or in a fenced enclosure) such that it is only serviceable by professional designated technicians under a Non-Disclosure Agreement (NDA). All sales for these devices must be under a NDA restricting the disclosure of the propriety information, including internal photos. Users Manual may be held confidential only when the manual contains proprietary technical information intended for professional technicians obligated under a NDA. All sales and distribution of the user’s manual must be under a NDA that restricts the disclosure of the information. In the application cover letter requesting permanent confidentiality the following additional description and the NDA exhibit is required: 1. Describe in detail how internal photos and/or users manual information are controlled to prevent them from becoming public or disclosed to unauthorized persons. 2. Describe how public access is restricted for products serviceable by professional designated technicians. 3. A statement that all sales of the non-consumer device will be under a NDA to include third party sales and that the final user of the device is subject to the NDA. 4. Provide an example of the NDA between the grantee and a purchaser. The request for confidentiality must Note 2: For scanning receiver, the schematics, block diagrams, operational description, tune-up procedure, parts list and internal photos are always held permanently confidential. Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request to withhold from public review for a period of [90] days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept short-term confidential for a period above from the date of the grant [Select one or more of items below that are not selected in the list above, as appropriate] Schematics Block diagrams Operational Description Tune-up Procedure 2(2) Parts List Test Setup Photos External Photos Internal Photos Users Manual Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Short-term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. If you have questions or need further information, please contact the undersigned. Sincerely, Tiffany Tang Senior Certification Manager 2024-06-06

15.00 mm 41.00 mm 30.21 mm 6 . 4 3 m m 字号6point

Hefei BOE Vision-electronic Technology Co.,Ltd. TEST REPORT SCOPE OF WORK FCC TESTING– 100146663 REPORT NUMBER 240530016SZN-005 ISSUE DATE [REVISED DATE] 18 July 2024 [--------------------] PAGES 72 DOCUMENT CONTROL NUMBER FCC SAR_b © 2017 INTERTEK Intertek Report No.: 240530016SZN-005 • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • The test report only allows to be revised only within the report defined retention period unless further standard or the requirement was noticed Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen, P.R. China Telephone: 86-755-8601 6288 Fax: 86-755-8601 6751 TRF No.: FCC SAR_b Page 1 of 72 SAR TEST REPORT For Hefei BOE Vision-electronic Technology Co.,Ltd. Product Description: onn. 12.1 Tablet Pro FCC ID: 2AYT5100146663 Model No.: 100146663 Report No.: 240530016SZN-005 Issue Date: 10 July 2024 Prepared and Checked by: Approved by: Bruce Zheng Project Engineer Ryan Chen Project Engineer 18 July 2024 Intertek Report No.: 240530016SZN-005 TRF No.: FCC SAR_b Page 2 of 72 Table of Contents 1. GENERAL INFORMATION ........................................................................................................................................................... 3 2. STATEMENT OF COMPLIANCE .................................................................................................................................................... 4 3. EQUIPMENT UNDER TEST (EUT) TECHNICAL DESCRIPTION ......................................................................................................... 5 4. AUXILIARY EQUIPMENT DETAILS ............................................................................................................................................... 6 5. TEST FACILITY ............................................................................................................................................................................ 6 6. GUIDANCE STANDARD .............................................................................................................................................................. 7 7. EUT ANTENNA LOCATIONS ........................................................................................................................................................ 8 8. POWER REDUCTION BY PROXIMITY SENSING ........................................................................................................................... 11 8.1 Proximity Sensor Triggering Distance (KDB 616217 §6.2) .........................................................................................................11 8.2 Proximity Sensor Triggering Distance Measurement Results .......................................................................................................13 8.3 Proximity Sensor Coverage (KDB 616217 §6.3) .........................................................................................................................13 8.4 Proximity Sensor Tilt Angle Assessment (KDB 616217 §6.4) .....................................................................................................13 9. RF EXPOSURE ........................................................................................................................................................................... 15 9.1 LIMITS ...........................................................................................................................................................................................15 9.2 EVALUATION ................................................................................................................................................................................16 10. SPECIFIC ABSORPTION RATE (SAR) ........................................................................................................................................... 17 10.1 INTRODUCTION .......................................................................................................................................................................17 10.2 SAR DEFINITION ......................................................................................................................................................................17 11. SAR MEASUREMENTS SYSTEM CONFIGURATION ...................................................................................................................... 18 11.1 SAR MEASUREMENT SET-UP ...................................................................................................................................................18 11.2 DASY5 E-FIELD PROBE SYSTEM ...............................................................................................................................................19 11.3 E-FIELD PROBE CALIBRATION ..................................................................................................................................................20 11.4 OTHER TEST EQUIPMENT ..................................................................…

Text truncated - open the document above for the full version.

Test Report Intertek Report No.: 240530016SZN-005_SAR Appendix Page: 1 of 17 ANNEX A: Test Layout and Setup Top Edge(0mm) Rear Face(0mm) Top Edge(10mm) Rear Face(10mm) Test Report Intertek Report No.: 240530016SZN-005_SAR Appendix Page: 2 of 17 ANNEX B: System Check Results Date: 06/30/2024 System Check_H2450 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: 2450 Head Medium parameters used: f = 2450 MHz; σ = 1.882 S/m; ε r = 38.25; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature: 22.0 °C; Liquid Temperature: 21.5 °C DASY Configuration: • Probe: EX3DV4 - SN7322; ConvF(7.36, 7.36, 7.36) @ 2450 MHz; Calibrated: 3/26/2024 • Sensor-Surface: 3mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1473; Calibrated: 3/18/2024 • Phantom: ELI V6.0 (20deg probe tilt); Type: QD OVA 003 AA; Serial: 2033 • DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Configuration/Pin=250 mW/Area Scan (7x11x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 16.1 W/kg Configuration/Pin=250 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 92.96 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 25.8 W/kg SAR(1 g) = 12.7 W/kg; SAR(10 g) = 6.16 W/kg Maximum value of SAR (measured) = 16.3 W/kg Test Report Intertek Report No.: 240530016SZN-005_SAR Appendix Page: 3 of 17 Date: 06/30/2024 System Check_H5200 Communication System: UID 0, _CW (0); Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: 5G Head Medium parameters used: f = 5200 MHz; σ = 4.564 S/m; ε r = 34.807; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature: 22.0 °C; Liquid Temperature: 21.5 °C DASY Configuration: • Probe: EX3DV4 - SN7322; ConvF(5.25, 5.25, 5.25) @ 5200 MHz; Calibrated: 3/26/2024 • Sensor-Surface: 3mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1473; Calibrated: 3/18/2024 • Phantom: ELI V6.0 (20deg probe tilt); Type: QD OVA 003 AA; Serial: 2033 • DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Configuration/Pin=100 mW/Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.8 W/kg Configuration/Pin=100 mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 51.82 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 27.6 W/kg SAR(1 g) = 7.29 W/kg; SAR(10 g) = 2.05 W/kg Maximum value of SAR (measured) = 11.4 W/kg Test Report Intertek Report No.: 240530016SZN-005_SAR Appendix Page: 4 of 17 Date: 06/30/2024 System Check_H5300 Communication System: UID 0, _CW (0); Frequency: 5300 MHz;Duty Cycle: 1:1 Medium: 5G Head Medium parameters used: f = 5300 MHz; σ = 4.649 S/m; ε r = 34.738; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature: 22.0 °C; Liquid Temperature: 21.5 °C DASY Configuration: • Probe: EX3DV4 - SN7322; ConvF(5.25, 5.25, 5.25) @ 5300 MHz; Calibrated: 3/26/2024 • Sensor-Surface: 3mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1473; Calibrated: 3/18/2024 • Phantom: ELI V6.0 (20deg probe tilt); Type: QD OVA 003 AA; Serial: 2033 • DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Configuration/Pin=100 mW/Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.1 W/kg Configuration/Pin=100 mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 49.99 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 27.9 W/kg SAR(1 g) = 7.67 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (measured) = 11.0 W/kg Test Report Intertek Report No.: 240530016SZN-005_SAR Appendix Page: 5 of 17 Date: 06/30/2024 System Check_H5600 Communication System: UID 0, _CW (0); Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: 5G Head Medium parameters used: f = 5600 MHz; σ = 4.92 S/m; ε r = 34.278; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature: 22.0 °C; Liquid Temperature: 21.5 °C DASY Configuration: • Probe: EX3DV4 - SN7322; ConvF(4.65, 4.65, 4.65) @ 5600 MHz; Calibrated: 3/26/2024 • Sensor-Surface: 3mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1473; Calibrated: 3/18/2024 • Phantom: ELI V6.0 (20deg probe tilt); Type: QD OVA 003 AA; Serial: 2033 • DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Configuration/Pin=100 mW/Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 11.8 W/kg Configuration/Pin=100 mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 49.80 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 36.3 W/kg SAR(1 g) = 8.46 W/kg; SAR(10 g) = 2.43 W/kg Maximum value of SAR (measured) = 12.9 W/kg Test Report Intertek Report No.: 240530016SZN-005_SAR Appendix Page: 6 of 17 Date: 06/30/2024 System Check_H5800 Communication System: UID 0, _CW (0); Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: 5G Head Medium parameters used: f = 5800 MHz; σ = 5.124 S/m; ε r = 33.938; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature: 22.0 °C; Liquid Temperature: 21.5 °C DASY Configuration: • Probe: EX3DV4 - SN7322; ConvF(4.8, 4.8, 4.8) @ 5800 MHz; Calibrated: 3/26/2024 • Sensor-Surface: 3mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1473; Calibrated: 3/18/2024 • Phantom: ELI V6.0 (20deg probe tilt); Type: QD OVA 003 AA; Serial: 2033 • DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Configuration/Pin=100 mW/Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.7 W/kg Configuration/Pin=100 mW/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 46.88 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 33.8 W/kg SAR(1 g) = 7.77 W/kg; SAR(10 g) = 2.24 W/kg Maximum value of SAR (measured) = 11.7 W/kg Test Report Intertek Report No.: 240530016SZN-005_SAR Appendix Page: 7 of 17 ANNEX C: Maximum Graph Results Date: 07/01/2024 2.4G WIFI 11ax20_top Side_CH11（Sensor is not triggered） Communication System: UID 0, WiFi 802.11 AX20 (0); Frequency: 2462 MHz;Duty Cycle: 1:1 Medium: 2450 Head Medium parameters used: f = 2462 MHz; σ = 1.896 S/…

Text truncated - open the document above for the full version.

Hefei BOE Vision-electronic Technology Co.,Ltd. TEST REPORT SCOPE OF WORK FCC TESTING–100146663, TBRED100146663, TBSIL100146663, TBGRY100146663, TBROS100146663 REPORT NUMBER 240530016SZN-001 ISSUE DATE [REVISED DATE] 18 July 2024 [---------------------] PAGES 47 DOCUMENT CONTROL NUMBER FCC ID 247_b © 2017 INTERTEK Intertek Report No.: 240530016SZN-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Service Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 47 FCC ID 247_b TEST REPORT 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com Hefei BOE Vision-electronic Technology Co.,Ltd. Application For Certification FCC ID: 2AYT5100146663 onn. 12.1 Tablet Pro Model: 100146663, TBRED100146663, TBSIL100146663, TBGRY100146663, TBROS100146663 2.4GHz Transceiver Report No.: 240530016SZN-001 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-23] Prepared and Checked by: Approved by: Bruce Zheng Ryan Chen Project Engineer Project Engineer Date: 18 July 2024 Intertek Report No.: 240530016SZN-001 Version: 01-November-2017 Page: 2 of 47 FCC ID 247_b TEST REPORT MEASUREMENT/TECHNICAL REPORT This report concerns (check one:) Original Grant X Class II Change Equipment Type: DSS - Part 15 Spread Spectrum Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-23 Edition] provision. Report prepared by: Bruce Zheng Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, Shenzhen. Tel: (86 755) 8601 0759 Fax: (86 755) 8601 6661 Intertek Report No.: 240530016SZN-001 Version: 01-November-2017 Page: 3 of 47 FCC ID 247_b TEST REPORT Table of Contents 1.0 Summary of Test Results ................................................................................................. 4 2.0 General Description ........................................................................................................ 5 2.1 Product Description ..................................................................................................... 5 2.2 Related Submittal(s) Grants ......................................................................................... 5 2.3 Test Methodology ........................................................................................................ 5 2.4 Test Facility .................................................................................................................. 6 3.0 System Test Configuration .............................................................................................. 7 3.1 Justification ................................................................................................................. 7 3.2 EUT Exercising Software ............................................................................................... 7 3.3 Special Accessories ....................................................................................................... 7 3.4 Equipment Modification .............................................................................................. 7 3.5 Measurement Uncertainty ........................................................................................... 8 3.6 Support Equipment List and Description ...................................................................... 8 4.0 Test Results ..................................................................................................................... 9 4.1 Radiated Test Result ..................................................................................................... 9 4.1.1 Field Strength Calculation ......................................................................................... 9 4.1.2 Radiated Emission Configuration Photograph ........................................................ 10 4.1.3 Radiated Emission .................................................................................................. 10 4.1.4 Transmitter Spurious Emissions (Radiated)............................................................. 13 4.2 Conducted Emission at Mains Terminal ..................................................................... 17 4.2.1 Conducted Emission Configuration Photograph ..................................................... 17 4.2.2 Conducted Emissions .............................................................................…

Text truncated - open the document above for the full version.

KunshaninnowaveCommunicationTechnologyCo.,Ltd. PRODUCT SPECIFICATION CustomerName:BOE ProductName:TC643(FF88) CustomerMaterialNumber:405-000037 RuiXiangmaterialnumber:F158F8801111000 Versions:V01 Manufacturer：KunshaninnowaveCommunicationTechnology Co.,Ltd. Address：BuildingH,JintuZhizaoGarden,No.55ShengchuangRoad, YushanTown,KunshanCity,JiangsuProvince AuthorizerCheckCompile Xudong.ZhangBo.LiXiangyang.Ye 2024.07.182024.07.182024.07.18 KunshaninnowaveCommunicationTechnologyCo.,Ltd. 1.Antennaspecification 2.AntennaPhoto AntennaTypeIFAFPCAntenna Frequency2400MHz-2500MHz5150MHz~5850MHz VSWR3.0Max Impedance50Ω PolarizationLinear Radiation pattern Omni-directional Antennasize （ mm ） 48.4*9.44 Antenna Gain(dbi) BT2.4GWiFi5GWiFi -1.5-1.20.8 Working Temperature （°C） -20~65 Storage Temperature （°C） -20~85 KunshaninnowaveCommunicationTechnologyCo.,Ltd. 3.AntennaReturnloss TheReturnlosstestdeviceisconnectedasfollows:E5071Bnetwork analyzer→50ohmcoaxialCable→testfixture BT Wifi KunshaninnowaveCommunicationTechnologyCo.,Ltd. 4.AntennaEfficiency 5.AntennaOTA KunshaninnowaveCommunicationTechnologyCo.,Ltd. 6.AntennaRadiationPattern 6.1BTAntenna 2450MHz 6.2WIFIAntenna 2450MHz XY XZ YZ XYXZ YZ KunshaninnowaveCommunicationTechnologyCo.,Ltd. 5180MHz 5825MHz XY XZYZ KunshaninnowaveCommunicationTechnologyCo.,Ltd. 7.AntennaDrawing