2AYUR-KBA9201AFutureboard Lite

产品介绍 技术参数 未来板Lite依据信息科技新课标要求，是一款满足 青少年学习、创意项目制作的可编程开发板。采用 ESP32作为主控芯片，集成WIFI无线，板载常用传 感器，搭载彩色屏幕，具有丰富多样的交互可能。 产品包含兼容乐高积木的标准尺寸插销孔，自身有 多个IO接口，可连接外部电子模块与执行器。你可 以采用代码或Kittenblock图形化方式编写程序，创 作思路的延展会变得更加轻松。 ESP32-S3 主控 处理器：Xtensa双核32位LX7处理器 主频：240MHz 时钟频率 PSRAM：8MB Flash：8MB Wi-Fi协议：2.4 GHz (802.11 b/g/n) 资源图示特点讲解 供电方式：内置750mAh锂电池 / Type-C USB 执行标准：GQ/XMKJ 001-2018 制造商：深圳市小喵科技有限公司 地址：深圳市光明区凤凰街道乐府广场1B 809 官网：www.kittenbot.cn 菜单： 在主控板启动时显示小喵开 机图案时，按一下 按键M， 即可进入菜单页面 充电&电量指示： 顶部有5颗LED指示灯，其 中左边4颗绿色是电量灯， 电量越少亮灯越少。当灯数 低于2颗时请注意充电。 插入Type-C USB可以给未 来板Lite供电也可充电。 工作电压：3.3V 最大工作电流：500mA 光敏传感器 RGB彩灯 1.77寸彩屏 乐高插销孔 Boot按键 (底层固件) 电量灯(4级) 蜂鸣器 加速度计 (3轴) 侧 视 TypeC USB (程序下载 &充电) 复位按键 DC电机口(3.7V)IO4PIN通讯协议口 红色电源灯 电源开关 可编程按键A、M、B 数字麦克风 ON OFF 引导 快速运行 选择程序 网络状态 关于本机 固件更新模式： 连按2次 复位按键，主控板屏幕会显示一个特殊的 彩色界面（固件更新界面）。如果误操作进入连这 个界面，可以再按一下复位按键即可推出。 一般是不需要更新固件的，详情请关注技术文档。 快速开始 1 插上USB，并打开未来板Lite电源开关 2 前往软件平台开启编程： 网页版：kblock.kittenbot.cn 客户端：前往官网下载 3 扫码前往电子文档查看教程与案例 如果无法扫码，可前往官网查看 EN KittenBot ® hello,world 未来板 Lite Futureboard Lite Wire it · Code it · Create it Introduction Technical Parameters Future Board Lite is a programmable develop- ment board that meets the needs of teenagers for learning and creative project production. It uses ESP32 as the main control chip, integrates WIFI wireless, has common sensors on board, and is equipped with a color screen, which has rich and diverse interaction possibilities. ESP32-S3 Core Processor：Xtensa dual-core 32-bit LX7 Freq：240MHz PSRAM：8MB Flash：8MB Wi-Fi Protocol：2.4 GHz (802.11 b/g/n) Resources Power Supply：Onboard Battery / Type-C Operating Voltage：3.3V Operating Current：500mA Light Sensor RGB 1.77 inch TFT Lego Hole Boot battery Indicator Buzzer Acceler- ometer Side View TypeC USB (Connect &Charging) Reset DC Motor(3.7V)IO4PIN Protocol Port Power LED Power Switch Codable Buttons Mic ON OFF Manufacturer： Shenzhen Kitten Technology Co.,Ltd Address： Yuefu Plaza, Block 1B, Room 808-810, Fenghuang St., Guangming District, Shenzhen Website：www.kittenbot.cc E-mail：[email protected] Quick Start 1 Plug in the USB and turn on the power switch of Futureboard Lite 2 start programming on Kittenblock ： Web: kblock.kittenbot.cn Offline: Download on www.kittenbot.cc 3 Visit learn.kittenbot.cc for the user guide KittenBotKittenBot1KittenBot Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC Warning Statement

Section Company n Address: Y 518000, Ch Product Na FCCID: 2AY Model(s): K 2.911(d)(5 ) We, [Shen z authorizatio  Pro  Ide n Yours sinc e Name: jinch Title: CTO Company n Signature: NOTE 1 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s 2.911(d) name: Shen Yuefu Plaza, hina ame: Future YUR-KBA9 KBA9201A, )(i) Equipm zhen Kitten on is sough hibited fro m ntified as an erely, heng Wu name: Shen ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t Shenzh )(5)(i) Ce nzhen Kitten Block 1B, eboard Lite 201 A KBA9201 B mentType Technolog y t through ce m receiving n equipmen nzhen Kitten of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the hen Kitte ertificatio n Technolog Room 808- B y Co.,Ltd] (“ ertification i an equipm e nt type in the n Technolog and Services C list SearchResul t 63 published o nts/2023/02/06 en Tech on – Equi gy Co.,Ltd 810, Feng h “the applica s not: ent authoriz e “Covered gy Co.,Ltd Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ hnology C 2. ipmentTy hung St., Gu ant”) certify t zation pursu List” NOTE 1 ection 2 of Th witch=P&id=32 /protecting-ag Co.,Ltd 911 (d)(5)(i) Eq ype uangming D that the equ uant to § 2.9 e Secure Netw 5672 ainst-national - quipment Type A District, She uipment for 903; of the F Date: Mar. works Act, ava -security-threa Attestation v1.2 enzhen, which FCC rules. . 05, 2024 ailable at ats-to-the-com 2 m

Section Company n Address: Y 518000, Ch Product Na FCCID: 2AY Model(s): K 2.911(d)(5 ) We, [Shenz the applica to §1.5000 2 Yours sinc e Name: jinch Title: CTO Company n Signature: NOTE 1 Delete option NOTE 2 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s 2.911(d) name: Shen Yuefu Plaza, hina ame: Future YUR-KBA9 KBA9201A, )(ii) Applica zhen Kitten tion, the ap 2 of this cha erely, heng Wu name: Shen not applicable ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t Shenzh )(5)(ii) Ce nzhen Kitten Block 1B, eboard Lite 201 A KBA9201 B ant filing Technolog y plicant is n apter, as an nzhen Kitten e to this applic of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the hen Kitte ertificatio n Technolog Room 808- B y Co.,Ltd] (“ ot identifie n entity prod n Technolog cation. and Services C list SearchResul t 63 published o nts/2023/02/06 en Tech on – App gy Co.,Ltd 810, Feng h “the applica ed NOTE 1 on th ducing cove gy Co.,Ltd Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ hnology C plicant (C hung St., Gu ant”) certify t he “Covered ered commu ection 2 of Th witch=P&id=32 /protecting-ag Co.,Ltd 2.911 (d)(5 Covered L uangming D that, as of t d List” NOTE 2 unications e e Secure Netw 5672 ainst-national - 5)(ii) Applicant A List ) District, She the date of t 2 , establishe equipment. Date: Mar . works Act, ava -security-threa Attestation v1.3 enzhen, the filing of ed pursuant . 05, 2024 ailable at ats-to-the-com 3 t m

Co m Ad d She Pr o Mo d Pr o We act We an d issu our Sig Na m Title Com mpany: Sh dress: Yue enzhen, 518 oduct Name del Numbe oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: Shen enzhen Kit efu Plaza, B 8000, Chin e: Futurebo er(s): KBA9 ription: Fu MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s jincheng W CTO Shenzhen nzhen K Agen tten Techn Block 1B, R a oard Lite 9201A, KBA tureboard bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect Wu n Kitten Tec Kitten Te nt Auth ology Co., Room 808-8 A9201B Lite Boulder C o erning the c allowed to f regulatory a cation. Any t as acts of chnology C echnolo horizat Ltd 810, Fengh ourt, Pleasa certification forward all i agencies as and all acts our own. Co.,Ltd ogy Co., tion hung St., G anton, Califo of above na information s required a s carried ou Date: Ltd uangming ornia 94566 amed equip related to t nd to discu ut by MiCOM Mar. 05, 20 District, 6, USA, to pment. the approva ss any M Labs on 24 al

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addi t in Title busine s authoriz For 4 O For 1 It is ou r corresp docume authoriz Sincer e Signatu Name: j Title: C T of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2AYUR-K om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Parts Lis Operatio Tune-up tional to abo 47 CFR §2 ss sensitive zed devices External Test Set Internal P User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: jincheng W TO Shenz ing Techno cations Com s Road 046 for Confiden KBA9201A Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram st onal Descrip Procedure ove mention .803 and th informatio n s, we reque Photos tup Photos Photos anual rsuant to P u ursuantto KD ding that all uring the ce s informatio sued. Wu zhen Kit logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption ned docume e importatio n remains c st Short Te ublic Notice DB 726920 l measurem ertification re on will be av tten Tec ssion’s rule old the follow nitely. m and equi e equipmen ould give co ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for chnology s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e y Co.,Ltd Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the d Date: Mar. 457 and § 0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq 05, 2024 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

To W We, Mo d sam Test Ple a Sig Na m Title Whom It May Shenzhen K del Number: me, only with t sample mo ase contact m nature: me: ji e: C Shen Mo y Concern, Kitten Techno KBA9201A, product mo d del: KBA920 me if you hav ncheng Wu CTO nzhen K odel Di ology Co.,Ltd KBA9201B; del named di 01A. ve any quest u Kitten Te fferenc d (Futureboa All model's t fferent. tion. echnolo ce Dec ard Lite); Tra the function, ogy Co., claratio ade Mark: Kit software an Date: ,Ltd on tenBot; d electric cir c Mar. 05, 20 cuit are the 024

Annex A External Photos Report Number: HK2310234944-1E/2E Page 1 of 3 Report Number: HK2310234944-1E/2E Page 2 of 3 Report Number: HK2310234944-1E/2E Page 3 of 3

FCC ID LABEL: Ca. 25mm x 40mm Label Location FCC ID: 2AYUR-KBA9201A

Annex B Internal Photos Report Number: HK2310234944-1E/2E Page 1 of 3 Antenna Report Number: HK2310234944-1E/2E Page 2 of 3 Report Number: HK2310234944-1E/2E Page 3 of 3

FCC RF Exposure EUT Description: Futureboard Lite Model No.: KBA9201A, KBA9201B FCC ID: 2AYUR‐KBA9201A 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)] ·[√ f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P=Maximum turn‐up power in mw D=Min. test separation distance in mm 2. Test Result of RF Exposure Evaluation Frequency (MHz) Output power (dBm) Tune Up Power (dBm) Max Tune Up power (dBm/mW) Min test separation distance (mm) Result Limit (mW/cm 2 ) SAR Test Exclusion 2.4GWiFi 2437 7.94 7±1 8/6.310 5 1.970 3.0 Pass BLE 2480 3.10 3±1 4/2.512 5 0.791 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2310234944‐1E/2E, antenna gain= 3dBi Per KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 1.970 which is<= 3, RF Exposure testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f (GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

OTA TEST REPORT TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 Applicant Espressif System (Shanghai) Co.,Ltd Product ESP32-C3-WROOM-02 Model ESP-ANT B Report No. Y2102A0260-T3 Issue Date March 9, 2021 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. Test Laboratory .............................................................................................................................. 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Test facility ........................................................................................................................ 3 1.3. Testing Location ................................................................................................................ 3 1.4. Laboratory Environment .................................................................................................... 4 2. General Description of Equipment under Test ............................................................................... 5 2.1. Applicant and Manufacturer Information ............................................................................ 5 2.2. General information ........................................................................................................... 5 2.3. Test Date ........................................................................................................................... 5 2.4. Receiving Date .................................................................................................................. 5 2.5. Applied Standards ............................................................................................................. 6 3. Test Conditions .............................................................................................................................. 7 3.1. Test Configuration ............................................................................................................. 7 3.2. Test Measurement ............................................................................................................. 7 4. Test Results ................................................................................................................................... 8 4.1. Gain and Efficiency ............................................................................................................ 8 5. Equipment List ............................................................................................................................... 9 ANNEX A 3-D Pattern Plots ................................................................................................................... 10 ANNEX B：The EUT Appearance and Test Configuration ...................................................................... 12 B.1 EUT Appearance ................................................................................................................... 12 B.2 Test Configuration ................................................................................................................. 13 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. Test Laboratory 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform measurement. 1.3. Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.4. Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5 OTA Test Report Report No: Y2102A0260-T3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 5 of 13 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. Applicant and Manufacturer Information Applicant Name Espressif System (Shanghai) Co.,Ltd Applicant address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China Manufacturer Name Espressif System (Shanghai) Co.,Ltd Manufacturer address Suite 204 Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, China 2.2. …

Text truncated - open the document above for the full version.

Page 1 of 45 Report No.: HK2310234944-2E FCC Test Report Test Report On Behalf of Shenzhen Kitten Technology Co.,Ltd For Futureboard Lite Model No.: KBA9201A, KBA9201B FCC ID: 2AYUR-KBA9201A Prepared For: Shenzhen Kitten Technology Co.,Ltd Yuefu Plaza, Block 1B, Room 808-810, Fenghung St., Guangming District, Shenzhen, 518000, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Oct. 23, 2023 ~ Mar. 01, 2024 Date of Report: Mar. 01, 2024 Report Number: HK2310234944-2E Page 2 of 45 Report No.: HK2310234944-2E Test Result Certification Applicant’s Name ................... : Shenzhen Kitten Technology Co.,Ltd Address .................................... : Yuefu Plaza, Block 1B, Room 808-810, Fenghung St., Guangming District, Shenzhen, 518000, China Manufacture's Name .............. : Shenzhen Kitten Technology Co.,Ltd Address .................................... : Yuefu Plaza, Block 1B, Room 808-810, Fenghung St., Guangming District, Shenzhen, 518000, China Product Description Trade Mark ................................. : KittenBot Product Name ............................ : Futureboard Lite Model and/or Type Reference .. : KBA9201A, KBA9201B Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of Performance of Tests ............... : Oct. 23, 2023 ~ Mar. 01, 2024 Date of Issue ............................................. : Mar. 01, 2024 Test Result ................................................. : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 45 Report No.: HK2310234944-2E Contents Page 1 Test Summary ................................................................................................................................................ 5 1.1 Test Description ......................................................................................................................................... 5 1.2 Measurement Uncertainty ......................................................................................................................... 6 1.3 Information of the Test Laboratory ............................................................................................................ 6 2 General Information ....................................................................................................................................... 7 2.1 General Description of EUT ...................................................................................................................... 7 2.2 Description of Test Conditions .................................................................................................................. 9 2.3 Description of Test Setup ........................................................................................................................ 10 2.4 Description of Support Units .................................................................................................................... 11 3 Equipments List for All Test Items ............................................................................................................. 12 4 Test Result .................................................................................................................................................... 15 4.1 Antenna Requirement.............................................................................................................................. 15 4.2 Conduction Emissions Measurement ...................................................................................................... 16 4.3 Radiated Emissions Measurement .......................................................................................................... 20 4.4 Maximum Output Power Measurement ................................................................................................... 29 4.5 Power Spectral Density ........................................................................................................................... 30 4.6 6dB Bandwidth ........................................................................................................................................ 33 4.7 Occupied Bandwidth ................................................................................................................................ 36 4.8 Band Edge ............................................................................................................................................... 37 4.9 Conducted Spurious Emissions .............................................................................................................. 39 5 Test Setup Photos ....................................................................................................................................... 43 6 Photos of the EUT ........................................................................................................................................ 45 Page 4 of 45 Report No.: HK2310234944-2E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Mar. 01, 2024 Jason Zhou Page 5 of 45 Report No.: HK2310234944-2E 1 Test Summary 1.1 Test Description Test Item Test Requirement Result Antenna Requirement §15.203…

Text truncated - open the document above for the full version.

Page 1 of 75 Report No.: HK2310234944-1E FCC Test Report Test Report On Behalf of Shenzhen Kitten Technology Co.,Ltd For Futureboard Lite Model No.: KBA9201A, KBA9201B FCC ID: 2AYUR-KBA9201A Prepared For: Shenzhen Kitten Technology Co.,Ltd Yuefu Plaza, Block 1B, Room 808-810, Fenghung St., Guangming District, Shenzhen, 518000, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Oct. 23, 2023 ~ Mar. 01, 2024 Date of Report: Mar. 01, 2024 Report Number: HK2310234944-1E Page 2 of 75 Report No.: HK2310234944-1E Test Result Certification Applicant’s Name .................. : Shenzhen Kitten Technology Co.,Ltd Address .................................. : Yuefu Plaza, Block 1B, Room 808-810, Fenghung St., Guangming District, Shenzhen, 518000, China Manufacture's Name ............. : Shenzhen Kitten Technology Co.,Ltd Address .................................. : Yuefu Plaza, Block 1B, Room 808-810, Fenghung St., Guangming District, Shenzhen, 518000, China Product Description Trade Mark: KittenBot Product Name ......................... : Futureboard Lite Model and/or Type Reference: KBA9201A, KBA9201B Standards .............................. : FCC Rules and Regulations Part 15 Subpart C Section 15.247 ANSI C63.10: 2013 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of Performance of Tests ............ : Oct. 23, 2023 ~ Mar. 01, 2024 Date of Issue ........................................... : Mar. 01, 2024 Test Result ............................................... : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 75 Report No.: HK2310234944-1E Table of Contents 1. Test Result Summary ............................................................................... 5 1.1. Test Procedures and Results ........................................................................................................... 5 1.2. Information of the Test Laboratory ................................................................................................. 5 1.3. Measurement Uncertainty ................................................................................................................ 6 2. EUT Description ........................................................................................ 7 2.1. General Description of EUT ............................................................................................................. 7 2.2. Carrier Frequency of Channels ........................................................................................................ 8 2.3. Operation of EUT during Testing ..................................................................................................... 8 2.4. Description of Test Setup ................................................................................................................. 9 3. General Information ................................................................................ 10 3.1. Test Environment and Mode .......................................................................................................... 10 3.2. Description of Support Units ......................................................................................................... 13 4. Test Results and Measurement Data .................................................... 14 4.1. Conducted Emission ....................................................................................................................... 14 4.2. Test Result ....................................................................................................................................... 16 4.3. Maximum Conducted Output Power ............................................................................................. 18 4.4. Emission Bandwidth ....................................................................................................................... 21 4.5. Power Spectral Density .................................................................................................................. 28 4.6. Conducted Band Edge and Spurious Emission Measurement .................................................. 35 4.7. Radiated Spurious Emission Measurement ................................................................................. 45 4.8. Antenna Requirement ..................................................................................................................... 72 5. Photographs of Test ............................................................................... 73 6. Photos of the EUT ................................................................................... 75 Page 4 of 75 Report No.: HK2310234944-1E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Mar. 01, 2024 Jason Zhou Page 5 of 75 Report No.: HK2310234944-1E 1. Test Result Summary 1.1. Test Procedures and Results Requirem…

Text truncated - open the document above for the full version.