2AYVT-GS500Waist Massager

SKG Health Technologies Co., Ltd. 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Sep. 3, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AYVT-GS500 SKG Health Technologies Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Henry Li Title:Manager Address: 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Tel.: 0757-28628887 Email: [email protected] SKG Health Technologies Co., Ltd. 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China

1 | Page SKG Health Technologies Co., Ltd. 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Attestation Statements To: Federal Communications Commission Date: Sep. 3, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2AYVT-GS500] Product Name: [Waist Massager] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature: Printed Name: Henry Li Title: Manager Address: 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Tel.: 0757-28628887 Email: [email protected] 2 | Page Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: FCC US Agent, LLC FRN: 0033402884 Contact Name: Tim Payne Address: 3722 Illinois Avenue, Saint Charles, IL 60174, USA Telephone No: (708) 571-3148 Email: [email protected] Applicant: Company name: SKG Health Technologies Co., Ltd. Product Description: Waist Massager FRN: 0030525117 Grantee Code: 2AYVT FCC ID: 2AYVT-GS500 Contact Name: Henry Li Address: 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Telephone No: 0757-28628887 Email: [email protected] [SKG Health Technologies Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [FCC US Agent, LLC] is our designated US agent for service of process for the above referenced FCC ID. [SKG Health Technologies Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [FCC US Agent, LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2025/08/29 Applicant’s Name: Henry Li US Agent’s Name: Tim Payne Title: Manager Title: Founder Signature Signature

SKG Health Technologies Co., Ltd. 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China 9/3/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AYVT-GS500 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired.  User Manual  Internal Photos  External Photos  Test Setup Photos  (Etc.) Sincerely, (Signature) Printed Name: Henry Li Title: Manager Address: 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Tel.: 0757-28628887 Email:[email protected]

SKG Health Technologies Co., Ltd. 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Date: Sep. 3, 25 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AYVT-GS500 I, the undersigned, hereby authorize (Shenzhen EU Testing Laboratory Limited) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen EU Testing Laboratory Limited) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (SKG Health Technologies Co., Ltd.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Applicant Signature: Printed Name: Henry Li Title:Manager Address: 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Tel.: 0757-28628887 Email: [email protected]

Label Location On EUT Label

RF EXPOSURE EVALUATION FCC ID: 2AYVT-GS500 According to KDB 447498 D01 General RF Exposure Guidance v06 and FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b): Routine SAR evaluation refers to that specifically required by §2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to qualify for TCB approval. Channel (MHz) Maximum output power (dBm) Tune up tolerance (dBm) Max Tune Up Power (dBm) Distance (mm) Calculation results Limit Operating Mode 2402 -5.71 -5.71±1 -4.71 5 0.105 3 BLE 1M 2440 -5.26 -5.26±1 -4.26 5 0.117 3 2480 -4.73 -4.73±1 -3.73 5 0.133 3 2402 -5.50 -5.50±1 -4.50 5 0.110 3 BLE 2M 2440 -5.05 -5.05±1 -4.05 5 0.123 3 2480 -4.53 -4.53±1 -3.53 5 0.140 3 Test Results: PASS.

TEST REPORT Report No.: 8333EU011410W Applicant: SKG Health Technologies Co., Ltd. Address: 23A Floor, Building 3, Zhongke R&D Park, No.009 Gaoxin South 1st Rd, High-tech Zone Community Yuehai Street, Nanshan District, Shenzhen, China Product Name: Waist Massager Model No.: GS500 Trademark: SKG FCC ID: 2AYVT-GS500 Test Standard(s): 47 CFR Part 15 Subpart C Test Result: Pass Date of Receipt: Aug. 14, 2025 Test Date: Aug. 14, 2025 – Aug. 25, 2025 Date of Issue: Aug. 26, 2025 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 33 Report No.: 8333EU011410W TRF No.: FCC Part 15 Subpart C_BLE (A02) Revision Record Report Version Issued Date Description Status V0 Aug. 26, 2025 Original Valid Page 3 of 33 Report No.: 8333EU011410W TRF No.: FCC Part 15 Subpart C_BLE (A02) Table of Contents 1 COVER PAGE .................................................................................................................................. 1 2 GENERAL INFORMATION ...................................................................................................................... 5 2.1 APPLICANT INFORMATION .................................................................................................................. 5 2.2 MANUFACTURER INFORMATION .......................................................................................................... 5 2.3 FACTORY INFORMATION ..................................................................................................................... 5 2.4 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................... 5 2.5 TECHNICAL INFORMATION OF E.U.T. .................................................................................................. 6 3 TEST SUMMARY ...................................................................................................................................... 7 3.1 TEST STANDARD ............................................................................................................................... 7 3.2 TEST VERDICT ................................................................................................................................... 7 3.3 TEST LABORATORY ........................................................................................................................... 7 4 TEST CONFIGURATION .......................................................................................................................... 8 4.1 TEST ENVIRONMENT .......................................................................................................................... 8 4.2 TEST EQUIPMENT .............................................................................................................................. 8 4.3 DESCRIPTION OF SUPPORT UNIT ........................................................................................................ 9 4.4 TEST MODE ...................................................................................................................................... 9 4.5 DESCRIPTION OF CALCULATION ......................................................................................................... 9 4.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 10 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 10 4.8 ABNORMALITIES FROM STANDARD CONDITION ................................................................................. 10 5 TEST ITEMS ........................................................................................................................................... 11 5.1 ANTENNA REQUIREMENT .................................................................................................................. 11 5.1.1 Test Requirement ........................................................................................................... 11 5.1.2 Antenna Anti-Replacement Construction ........................................................................ 11 5.1.3 Antenna Gain .................................................................................................................. 11 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 12 5.2.1 Test Requirement ........................................................................................................... 12 5.2.2 Test Setup Diagram ........................................................................................................ 12 5.2.3 Test Procedure ............................................................................................................... 12 5.2.4 Test Data......................................................................................................................... 12 5.3 DTS BANDWIDTH ............................................................................................................................ 12 5.3.1 Test Requirement ........................................................................................................... 15 5.3.2 Test Setup Diagram ........................................................................................................ 15 5.3.3 Test Procedure ............................................................................................................... 15 5.3.4 Test Data......................................................................................................................... 15 5.4 MAXIMUM CONDUCTED OUTPUT POWER .......................................................................................... 16 5.4.1 Test Requirement ..................…

Text truncated - open the document above for the full version.

Page 1 of 36 Report No.: 8333EU011410W-AD ANNEX D TEST DATA For Project No.: 8333EU011410W Client: SKG Health Technologies Co., Ltd. Product Description: Waist Massager Model No.: GS500 FCC ID: 2AYVT-GS500 Technology: Bluetooth BLE Test Engineer: Test Date: 2025-08-24 Page 2 of 36 Report No.: 8333EU011410W-AD Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Maximum Power Spectral Density Pass Unwanted Emissions In Non-restricted Frequency Bands Pass Page 3 of 36 Report No.: 8333EU011410W-AD 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 0.095 0.625 15.20 8.18 0.03 2440 0.095 0.625 15.20 8.18 0.06 2480 0.095 0.625 15.20 8.18 0.03 2M SISO 2402 0.063 0.625 10.08 9.97 0.00 2440 0.063 0.625 10.08 9.97 0.00 2480 0.063 0.625 10.08 9.97 0.00 Page 4 of 36 Report No.: 8333EU011410W-AD 1.2 Test Graph 1.2.1 Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 5 of 36 Report No.: 8333EU011410W-AD 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 6 of 36 Report No.: 8333EU011410W-AD 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 7 of 36 Report No.: 8333EU011410W-AD 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 1.034 / Pass 2440 1 1.034 / Pass 2480 1 1.035 / Pass 2M SISO 2402 1 2.091 / Pass 2440 1 2.089 / Pass 2480 1 2.097 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.504 >=0.5 Pass 2440 1 0.504 >=0.5 Pass 2480 1 0.502 >=0.5 Pass 2M SISO 2402 1 0.870 >=0.5 Pass 2440 1 0.865 >=0.5 Pass 2480 1 0.852 >=0.5 Pass Page 8 of 36 Report No.: 8333EU011410W-AD 2.2 Test Graph 2.2.1 OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 9 of 36 Report No.: 8333EU011410W-AD 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 10 of 36 Report No.: 8333EU011410W-AD 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 11 of 36 Report No.: 8333EU011410W-AD 2.2.2 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 12 of 36 Report No.: 8333EU011410W-AD 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 13 of 36 Report No.: 8333EU011410W-AD 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 14 of 36 Report No.: 8333EU011410W-AD 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 -5.71 <=30 Pass 2440 -5.26 <=30 Pass 2480 -4.73 <=30 Pass 2M SISO 2402 -5.50 <=30 Pass 2440 -5.05 <=30 Pass 2480 -4.53 <=30 Pass Page 15 of 36 Report No.: 8333EU011410W-AD 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit 1M SISO 2402 -25.47 <=8 Pass 2440 -25.16 <=8 Pass 2480 -24.51 <=8 Pass 2M SISO 2402 -27.93 <=8 Pass 2440 -27.49 <=8 Pass 2480 -26.97 <=8 Pass Page 16 of 36 Report No.: 8333EU011410W-AD 4.2 Test Graph 4.2.1 PSD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 17 of 36 Report No.: 8333EU011410W-AD 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 18 of 36 Report No.: 8333EU011410W-AD 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 19 of 36 Report No.: 8333EU011410W-AD 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Test Result 5.1.1 Ref Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 1M SISO 2402 1 -5.84 2440 1 -5.40 2480 1 -4.87 2M SISO 2402 1 -6.44 2440 1 -5.99 2480 1 -5.46 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. 5.1.2 CSE Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 -5.84 -25.84 Pass 2440 1 -5.40 -25.40 Pass 2480 1 -4.87 -24.87 Pass 2M SISO 2402 1 -6.44 -26.44 Pass 2440 1 -5.99 -25.99 Pass 2480 1 -5.46 -25.46 Pass Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. Page 20 of 36 Report No.: 8333EU011410W-AD 5.2 Test Graph 5.2.1 Ref 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 21 of 36 Report No.: 8333EU011410W-AD 1M_HCH_2480MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 22 of 36 Report No.: 8333EU011410W-AD 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 23 of 36 Report No.: 8333EU011410W-AD 5.2.2 CSE 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 24 of 36 Report No.: 8333EU011410W-AD 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 25 of 36 Report No.: 8333EU011410W-AD 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 26 of 36 Report No.: 8333EU011410W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 27 of 36 Report No.: 8333EU011410W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 28 of 36 Report No.: 8333EU011410W-AD 1M_HCH_2480MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 29 of 36 Report No.: 8333EU011410W-AD 1M_HCH_2480MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 30 of 36 Report No.: 8333EU011410W-AD 2M_LCH_2402MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 31 of 36 Report No.: 8333EU011410W-AD 2M_LCH_2402MHz_Ant1_NTNV 2M_LCH_2402MHz_Ant1_NTNV Page 32 of 36 Report No.: 8333EU011410W-AD 2M_LCH_2402MHz_Ant1_NTNV 2M_MCH_2440MHz_Ant1_NTNV Page 33 of 36 Report No.: 8333EU011410W-AD 2M_MCH_2440MHz_Ant1_NTNV 2M_MCH_2440MHz_Ant1_NTNV Page 34 of 36 Report No.: 8333EU011410W-AD 2M_MCH_2440MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 35 of 36 Report No.: 8333EU011410W-AD 2M_HCH_2480MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV Page 36 of 36 Report No.: 8333EU011410W-AD 2M_HCH_2480MHz_Ant1_NTNV 2M_HCH_2480MHz_Ant1_NTNV --------- End of Report -------

Approvalsheet Page1of9ASC_RFECA3216060A1T_V07May.2013 APPROVALSHEET RFECASeries–RoHSCompliance CERAMICANTENNA HalogensFreeProduct 2.4GHzISMBandWorkingFrequency P/N:RFECA3216060A1T *Contentsinthissheetaresubjecttochangewithoutpriornotice. Approvalsheet Page2of9ASC_RFECA3216060A1T_V07May.2013 FEATURES 1.SurfaceMountedDeviceswithasmalldimensionof3.2X1.6X0.6mm 3 meetfutureminiaturizationtrend. 2.LTCCprocess. 3.HighstabilityinTemperature/HumidityChange. 4.SuperbperformancetoplaceonthemiddleofPCBedgeandexcellentpeak/averagegainobservedby fieldtestapplication. APPLICATIONS 1.ISMBand2.4GHzapplications. 2.Bluetooth.. CONSTRUCTION PINConnection 1Feeding 2Solderingterminal Approvalsheet Page2of9ASC_RFECA3216060A1T_V07May.2013 DIMENSIONS Figure SymbolDimension(mm) L 3.10±0.20 W 1.60±0.20 T 0.60±0.10 A 0.25±0.20 Approvalsheet Page3of9ASC_RFECA3216060A1T_V07May.2013 SOLDERLANDPATTERNDESIGN Figure(EmptySpace8.0mmx3.0mm) ThelimitedsizeforECA3216isL>30mmandD>6mm LandPattern TYPE1ELECTRONICCHARACTERISTICS ItemSpecification WorkingFrequencyRange 2.4GHz~2.4835GHz(Note-1) Gain2dBi(Typical) VSWR 2.1max. PolarizationLinear AzimuthBeamwidth Omni-directional Impedance 50Ω *Note1.CentralFrequencyshouldbedefinedaftercustomers’applicationapproval. Approvalsheet Page4of9ASC_RFECA3216060A1T_V07May.2013 AntennaonTestBoard(Thickness0.8mm) AntennaS11onTestBoard [email protected] [email protected] [email protected] AntennaVSWRonTestBoard [email protected] [email protected] [email protected] Approvalsheet Page5of9ASC_RFECA3216060A1T_V07May.2013 RADIATIONPATTERN RadiationPatternandGainweredependentonmeasurementboarddesign.ThespecificationofRFECA3216060A1T antennawasmeasuredbasedonthePCBsizeandinstallationpositionasshowninthebelowfigureTestBoard. Z x Y VerticalHorizontal Y-Z Plane Average Gain= -1.511dBi 90 -30 -40 270 PeakGain=-2.15dBi AverageGain=-3.84dBi 90 150 210 240300 270 PeakGain=-1.82dBi AverageGain=-5.33dBi X-Z Plane Average Gain= -0.571dBi 90 -10 0 270 PeakGain=1.02dBi AverageGain=-2.68dBi 90 270 PeakGain=0.36dBi AverageGain=-4.72dBi X-Y Plane Average Gain= -1.166dBi 90 -30 270 PeakGain=-8.74dBi AverageGain=-13.63dBi 90 -40 270 PeakGain=2.64dBi AverageGain=-1.42dBi 0 240 15030 180 -20 -40 330 0 -10 330 180 180 60 -40 30 0 0 30 300 -40 0 -10 -20 -30 60 180 0 60 330 -20 -30 330 180 330 0 30 0 -10 -20 -30 -40 60 -10 0 30150 60 30 1800 -30 -20 x -10 0 x 240300 210 150 120 Y 60 300 210 120 Y 330 240300 120 210 150 Z X Z 240 210 120 150 X 120 Y Z 210 Y -20 240300 120 Z Approvalsheet Page6of9ASC_RFECA3216060A1T_V07May.2013 RELIABILITYTEST Testitem Testcondition/Testmethod Specification Solderability JISC0050-4.6 JESD22-B102D *Solderbathtemperature：235±5。C *Immersiontime ： 2 ± 0.5sec Solder ： Sn3Ag0.5Cuforlead-free Atleast95%ofasurfaceofeachterminal electrodemustbecoveredbyfreshsolder. Leaching (Resistanceto dissolutionof metallization) IEC60068-2-58 *Solderbathtemperature ： 260 ± 5 。 C *Leachingimmersiontime：30±0.5sec Solder:SN63A Lossofmetallizationontheedgesofeach electrodeshallnotexceed25%. Resistancetosoldering heat JISC0050-5.4 *Preheatingtemperature：120~150°C, 1minute. *Soldertemperature：270±5。C *Immersiontime ： 10 ± 1sec Solder ： Sn3Ag0.5Cuforlead-free Measurementtobemadeafterkeepingat roomtemperaturefor24 ± 2hrs Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Lossofmetallizationontheedgesofeach electrodeshallnotexceed25%. DropTest JISC0044 Customer’sspecification. *Height：75cm *TestSurface：Rigidsurfaceofconcreteor steel. *Times ： 6surfacesforeachunits ； 2timesfor eachside. Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Vibration JISC0040 *Frequency：10Hz~55Hz~10Hz(1min) *Totalamplitude：1.5mm *Testtimes ： 6hrs.(Twohrseachinthree mutuallyperpendiculardirections) Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. AdhesiveStrength ofTermination JISC0051-7.4.3 *Pressurizingforce ： 5N(≤0603)；10N(>0603) *Testtime ： 10±1sec Noremarkabledamageorremovalofthe termination. Approvalsheet Page7of9ASC_RFECA3216060A1T_V07May.2013 Bendingtest JISC0051-7.4.1 Themiddlepartofsubstrateshallbe pressurizedbymeansofthepressurizingrod atarateofabout1mm/sperseconduntilthe deflectionbecomes1mm/sandthenpressure shallbemaintainedfor5±1sec. Measurementtobemadeafterkeepingat roomtemperaturefor24 ± 2hours Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Temperaturecycle JISC0025 1.30±3minutesat-40。C±3。C, 2.10~15minutesatroomtemperature, 3.30±3minutesat+85。C±3。C, 4.10~15minutesatroomtemperature, Total100continuouscycles Measurementtobemadeafterkeepingat roomtemperaturefor24 ± 2hrs Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Hightemperature JISC0021 *Temperature：85。C±2。C *Testduration ： 1000+24/-0hours Measurementtobemadeafterkeepingat roomtemperaturefor24 ± 2hrs Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Humidity (steadyconditions) JISC0022 *Humidity：90%to95%R.H. *Temperature：40±2。C *Time：1000+24/-0hrs. Measurementtobemadeafterkeeping atroomtemperaturefor24±2hrs ※500hrsmeasuringthefirstdatathen 1000hrsdata Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Lowtemperature JISC0020 *Temperature：-40。C±2。C *Testduration：1000+24/-0hours Measurementtobemadeafterkeepingat roomtemperaturefor24±2hrs Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Approvalshe…

Text truncated - open the document above for the full version.