2AYYO-G200USLoRaWAN Gateway

G200 USER MANUAL +GY_2OTQOT  'JJXKYY ͹ 8UUS*ZN,RUUX3OIXUYULZ)UMU([ORJOTM  -GU^OT9U[ZNZN8UGJ4GTYNGT*OYZXOIZ9NKT`NKT)N OTG +SGOR ͹ 9KX\OIK&+GY_2OTQOTIUS  :KR ͹    TABLE OF CONTENTS 1  PRODUCT OVERVIEW INTERFACE AND LEDs ................................................... ..................3  (XOKL/TZXUJ[IZOUT  ,KGZ[XKY  2  INTERFACE AND LEDs ................................................... ................................................... ......3  /TZKXLGIK  2+*9ZGZ[Y/TJOIGZOUTY 3. SPECIFICATION.................................... ................................................... .................................4 4. CONFIGURATION .................................... ................................................... ..............................4  -KZZOTM9ZGXZKJ  3UJOL_OTM4KZ]UXQ6GXGSKZKXY  3UJOL_OTM2U8G6GXGSKZKXY  )[YZUSO`KJ)UTLOM[XGZOUT  :OSK`UTK)UTLOM[XGZOUT  8KYZGXZ-GZK]G_ 5. INSTALLATION ..................................... ................................................... ................................10  =GRR3U[TZOTM  )KOROTM3U[TZOTM 45:+9  6. PACKAGE LIST .................................... ................................................... ................................11 7. FCC STATEMENT ................................... ................................................... .............................11 8. SUPPORT ......................................... ................................................... ....................................11 1 2 3 4 5 6 7 9KTYOTMZNK=UXRJ  1  PRODUCT OVERVIEW INTERFACE AND LEDs  1.1 Brief Introduction G200 Series gateway is a portable indoor gateway and complies with LoRaWAN™ protocol to provide low power, stable and secure wireless connectivity for devices and sensors. G200 adopts star topology deployment and provide WiFi or Ethernet connection to network server. The solution is used in a wide area of applica tions such as smart energy, smart cities and agricultural IoT.G200 meets the network requirements of long-range co mmunications, strong anti-interference ability, high sensitivity and low power for many disper sed nodes to provide a low cost and high reliability indoor IoT solution.  ,KGZ[XKY  ș Low Cost Compact and portable, easy to install, cost effective f or LoRa network deployment. ș Stable Network The legal nodes can move freely within gateway coverage . When one gateway is abnormal in the multi-gateway ne twork, the node can be accessed through adjacent gateway. ș Versatile Backhaul Options Support Ethernet/WiFi, support switch dynamically. ș Easy Maintenance Support remote troubleshooting and firmware upgrade, support local connection for debugging. 2  INTERFACE AND LEDs  /TZKXLGIK   Port 1: LoRa Antenna (SMA-female) Port 2: RESET Port 3: SIM Card Slot Port 4: Micro USB Port 5: Ethernet (RJ45) Port 6: DC12V DC_IN Port 7: WiFi Antenna (SMA-female) 45:+  澝 6UXZ ワ 8+9+:NURKNKGJOTZU8+9+:NURK]OZNUTKKTJULVG VKXIROVLUX YKIUTJYZNKTU[Z-XKYZUXKLGIZUX_JKLG[RZY    2+*9ZGZ[Y/TJOIGZOUTY   2+*Y  ,[TIZOUTJKLOTOZOUT  ,RGYNHR[KGTJMXKKTK\KX_YKIUTJ  ș 4UXSGR49IUTTKIZOUT  ș 4UXSGRJGZGLUX]GXJ ,RGYNXKJGTJHR[KK\KX_YKIUTJ  ș 'HTUXSGR49IUTTKIZOUT  ș 4UXSGRJGZGLUX]GXJ  ,RGYNXKJGTJMXKKTK\KX_YKIUTJ  ș 'HTUXSGR49IUTTKIZOUT  ș 'HTUXSGRJGZGLUX]GXJ  =NOZKROMNZY[VLUXSOT[ZK -GZK]G_VU]KXUT  Y_YZKSOTOZOGRO`GZOUT  5LL  -GZK]G_OYTUZVU]KXKJUT       9KTYOTMZNK=UXRJ  Status, System, Service, Network, LoRa and Logout tab s are displayed at the top of the page. If you want to change administrator password, please click System-Administration then input the new password and click Save & Apply . Step 2: Click WAN-Edit , the General Setup (Ethernet static IP configuration or DHCP configuration) can be modified. The default configura tion is DHCP mode. 4.2 Modifying Network Parameters Please follow the below steps to modify network parame ters: Step1: Click Network-Interface , then the Ethernet and WiFi configuration can be fou nd in this page. Step 3: The Use gateway metric needs to be configured to 5 during DHCP configuration. Step 4: Set up static IP address.     9KTYOTMZNK=UXRJ   Step 7: Click Edit in the Clie…

Text truncated - open the document above for the full version.

Page 1 of 13 External Photos of EUT 1# EUT-1 EUT-2 Page 2 of 13 EUT-3 EUT-4 Page 3 of 13 EUT-5 EUT-6 Page 4 of 13 EUT-7 EUT-8 Lora antenna WIFI Page 6 of 13 2# EUT-1 EUT-2 Page 7 of 13 EUT-3 EUT-4 Page 8 of 13 EUT-5 EUT-6 Page 9 of 13 EUT-7 EUT-8

Page 10 of 13 Internal Photos of EUT EUT-1 EUT-2 Page 11 of 13 EUT-3 EUT-4 Page 12 of 13 EUT-5 EUT-6 Lora RF IC Page 13 of 13 EUT-7 EUT-8 --------------------This is the last page of the report. ------------------ WIFI RF IC

Guangzhou GRG Metrology & Test Co., Ltd. Address:No.163 Pingyun Road, West of Huangpu Avenue, Guangzhou GuangdongChina Tel:+86-20-38699960 Fax:+86-20-38695185 Email: [email protected] http://www.grgtest.com TEST REPORT Verified Code: Report No.: E202012112553-4 Application No.: E202012112553 Client: SHENZHEN EASYLINKIN TECHNOLOGY CO.,LTD Address: 705, Floor 7, Zhongdian Difu Building, Zhenhua Road, Fuqiang Community, Huaqiang North Street, Futian District, Shenzhen, Guangdong Province, China Sample Description: LoRaWAN Gateway Model: G200-HU915 Test Specification: CFR 47, FCC Part 2.1091 Radio frequency radiation exposure evaluation: mobile devices. KDB 447498 D01 General RF Exposure Guidance v06 Receipt Date: 2020-12-11 Test Date: 2020-12-11to 2021-03-19 Issue Date: 2021-04-08 Test Result: Pass Prepared By: Test Engineer Reviewed By: Technical Manager Approved By: Manager Other Aspects: Note: Note Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable; The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written approval of GRGT. Report: E202012112553-4 Page 1 of 8 DIRECTIONS OF TEST 1. This station carries out test task according to the national regulation of verifications which can be traced to National Primary Standards and BIPM. 2. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. 3. If there is any objection concerning the test, the client should inform the laboratory within 15 days from the date of receiving the test report. Report: E202012112553-4 Page 2 of 8 TABLE OF CONTENTS 1. GENERAL DESCRIPTION OF EUT .................................................................................................................. 3 1.1. APPLICANT ................................................................................................................. 3 1.2. MANUFACTURER ...................................................................................................... 3 1.3. FACTORY .................................................................................................................... 3 1.4. BASIC DESCRIPTION OF EQUIPMENT UNDER TEST ......................................... 3 2. LABORATORY AND ACCREDITATIONS ......................................................................................................... 5 2.1. LABORATORY ............................................................................................................ 5 2.2. ACCREDITATIONS .................................................................................................... 5 3. EVALUATION METHOD ............................................................................................................................... 6 4. LIMITS FOR GENERAL POPULATION/UNCONTROLLEDEXPOSURE ................................................................. 6 5. CALCULATION METHOD ............................................................................................................................. 7 6. ESTIMATION RESULT .................................................................................................................................. 7 4.1 CONDUCTED POWER RESULTS................................................................................. 7 4.2 MANUFACTURING TOLERANCE ............................................................................... 8 4.3 MEASUREMENT RESULTS .......................................................................................... 8 4.3.1 STANDALONE MPE ........................................................................................... 8 7. CONCLUSION .............................................................................................................................................. 8 Report: E202012112553-4 Page 3 of 8 1. GENERAL DESCRIPTION OF EUT 1.1. APPLICANT Name: SHENZHEN EASYLINKIN TECHNOLOGY CO.,LTD Address: 705, Floor 7, Zhongdian Difu Building, Zhenhua Road, Fuqiang Community, Huaqiang North Street, Futian District, Shenzhen, Guangdong Province, China 1.2. MANUFACTURER Name: SHENZHEN EASYLINKIN TECHNOLOGY CO.,LTD Address: 705, Floor 7, Zhongdian Difu Building, Zhenhua Road, Fuqiang Community, Huaqiang North Street, Futian District, Shenzhen, Guangdong Province, China 1.3. FACTORY Name: SHENZHEN EASYLINKIN TECHNOLOGY CO.,LTD Address: 705, Floor 7, Zhongdian Difu Building, Zhenhua Road, Fuqiang Community, Huaqiang North Street, Futian District, Shenzhen, Guangdong Province, China 1.4. BASIC DESCRIPTION OF EQUIPMENT UNDER TEST Equipment: LoRaWAN Gateway Model No.: G200-HU915 Adding Model: / Trade Name: Easylinkin FCC ID: 2AYYO-G200US Power supply: DC12V power supplied by adapter Adapter Specification: Model: PS120W1000U Input: 100-240V~50/60Hz 0.5A Max Output: 12.0V 1.0A 12.0W Frequency Range WIFI:2412MHz~2462MHz: 802.11b; 802.11g; 802.11n(HT20) 2422MHz~2452MHz: 802.11n(HT40); Lora: 902.3~927.5MHz Transmit Power: WIFI: 18.32dBm for 802.11b mode 22.47dBm for 802.11g mode 22.21dBm for 802.11n HT20 mode 21.02dBm for 802.11n HT40 mode Lora: Peak: 109.35dBuV/m (Max.) Average: 77.83dBuV/m (Max.) Modulation type: WIFI: DSSS for 802.11b mode; OFDM for 802.11g mode; Report: E202012112553-4 Page 4 of 8 OFDM for 802.11n mode. Lora: GFSK Channel space: WIFI: 5MHz Lora:/ Antenna Specification: External antenna with 2.15dBi gain (Max.) Temperature Range: 0°C ~ +60°C Hardware Version: PCB-GW200M-01D Software Version: g200_v2.0.0.2001201313 Sample No: E202012112553-0001, E202012112553-0005 Note: / Report: E202012112553-4 Page 5 of 8 2. LABORATORY AND ACCREDITATIONS 2.1. LABORATORY The tests & measurements refer to this report were performed by Shenzhen EMC Laboratory of Guangzhou GRG Metrology & Test Co,. Ltd. Add.: No.1301 Guanguang Road Xinlan Community, Guanlan Street, Longhua District Shenzhen, 5181…

Text truncated - open the document above for the full version.

Guangzhou GRG Metrology & Test Co., Ltd. Address:No.163 Pingyun Road, West of Huangpu Avenue, Guangzhou GuangdongChina Tel:+86-20-38699960 Fax:+86-20-38695185 Email: [email protected] http://www.grgtest.com TEST REPORT Verified Code: Report No.: E202012112553-2 Application No.: E202012112553 Client: SHENZHEN EASYLINKIN TECHNOLOGY CO.,LTD Address: 705, Floor 7, Zhongdian Difu Building, Zhenhua Road, Fuqiang Community, Huaqiang North Street, Futian District, Shenzhen, Guangdong Province, China Sample Description: LoRaWAN Gateway Model: G200-HU915 Test Specification: CFR 47, FCC Part 15 Subpart C RADIO FREQUENCY DEVICES: Subpart C—Intentional Radiators Receipt Date: 2021-01-11 Test Date: 2021-01-12 to 2021-03-08 Issue Date: Test Result: Pass Prepared By: Test Engineer Reviewed By: Technical Manager Approved By: Manager Other Aspects: Note: Note Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable; The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written approval of GRGT. 541318 2021-04-15 Report No.: E202012112553-2 Application No.: E202012112553 Page 1 of 87 DIRECTIONS OF TEST 1. This station carries out test task according to the national regulation of verifications which can be traced to National Primary Standards and BIPM. 2. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. 3. If there is any objection concerning the test, the client should inform the laboratory within 15 days from the date of receiving the test report. Report No.: E202012112553-2 Application No.: E202012112553 Page 2 of 87 TABLE OF CONTENTS 1. TEST RESULT SUMMARY ............................................................................................................................ 4 2. GENERAL DESCRIPTION OF EUT ................................................................................................................. 5 2.1. APPLICANT .............................................................................................................................................. 5 2.2. MANUFACTURER ................................................................................................................................... 5 2.3. FACTORY ................................................................................................................................................. 5 2.4. BASIC DESCRIPTION OF EQUIPMENT UNDER TEST ...................................................................... 5 2.5. TEST OPERATION MODE ...................................................................................................................... 6 2.6. LOCAL SUPPORTIVE INSTRUMENTS ................................................................................................. 6 3. LABORATORY AND ACCREDITATIONS ........................................................................................................ 7 3.1. LABORATORY ......................................................................................................................................... 7 3.2. ACCREDITATIONS ................................................................................................................................. 7 3.3. MEASUREMENT UNCERTAINTY ........................................................................................................ 7 4. LIST OF USED TEST EQUIPMENT AT GRGT .................................................................................................. 8 5. CONDUCTED EMISSION MEASUREMENT .................................................................................................... 9 5.1. LIMITS ....................................................................................................................................................... 9 5.2. TEST PROCEDURES ................................................................................................................................ 9 5.3. TEST SETUP ........................................................................................................................................... 10 5.4. DATA SAMPLE ...................................................................................................................................... 10 5.5. TEST RESULTS ...................................................................................................................................... 11 6. RADIATED SPURIOUS EMISSIONS ............................................................................................................. 13 6.1. LIMITS ..................................................................................................................................................... 13 6.2. TEST PROCEDURES (PLEASE REFER TO MEASUREMENT STANDARD) .................................................... 13 6.3. TEST SETUP ........................................................................................................................................... 17 6.4. DATA SAMPLE ...................................................................................................................................... 18 6.5. TEST RESULTS ...................................................................................................................................... 19 7. 6DB BANDWIDTH ..................................................................................................................................... 39 7.1. LIMITS ..................................................................................................................................................... 39 7.2. TEST PROCEDURES .............................................................................................................................. 39 7.3. TEST SETUP .......................…

Text truncated - open the document above for the full version.

Report No.: E202012112553-2 Application No.: E202012112553 Page 50 of 87 9.4. TEST RESULTS 802.11b Mode: Channel No. Frequency (MHz) PSD (dBm/3kHz) Duty Factor Total PSD with Duty Factor (dBm/3kHz) Limit (dBm/ 3kHz) Result 1 2412 -7.133 0.00 -7.133 8 Pass 6 2437 -6.577 0.00 -6.577 8 Pass 11 2462 -9.350 0.00 -9.350 8 Pass 802.11g Mode: Channel No. Frequency (MHz) PSD (dBm/3kHz) Duty Factor Total PSD with Duty Factor (dBm/3kHz) Limit (dBm/ 3kHz) Result 1 2412 -7.197 0.09 -7.11 8 Pass 6 2437 -7.013 0.09 -6.92 8 Pass 11 2462 -9.705 0.09 -9.62 8 Pass 802.11n HT20 Mode: Channel No. Frequency (MHz) PSD (dBm/3kHz) Duty Factor Total PSD with Duty Factor (dBm/3kHz) Limit (dBm/ 3kHz) Result 1 2412 -7.933 0.10 -7.83 8 Pass 6 2437 -7.464 0.10 -7.36 8 Pass 11 2462 -9.759 0.10 -9.66 8 Pass 802.11n HT40 Mode: Channel No. Frequency (MHz) PSD (dBm/3kHz) Duty Factor Total PSD with Duty Factor (dBm/3kHz) Limit (dBm/ 3kHz) Result 3 2422 -9.179 0.15 -9.03 8 Pass 6 2437 -10.386 0.15 -10.24 8 Pass 9 2452 -10.163 0.15 -10.01 8 Pass Report No.: E202012112553-2 Application No.: E202012112553 Page 51 of 87 802.11b mode: Channel 2412MHz 802.11b mode: Channel 2437MHz Report No.: E202012112553-2 Application No.: E202012112553 Page 52 of 87 802.11b mode: Channel 2462MHz 802.11g mode: Channel 2412MHz Report No.: E202012112553-2 Application No.: E202012112553 Page 53 of 87 802.11g mode: Channel 2437MHz 802.11g mode: Channel 2462MHz Report No.: E202012112553-2 Application No.: E202012112553 Page 54 of 87 802.11n HT20 mode: Channel 2412MHz 802.11n HT20 mode: Channel 2437MHz Report No.: E202012112553-2 Application No.: E202012112553 Page 55 of 87 802.11n HT20 mode: Channel 2462MHz 802.11n HT40 mode: Channel 2422MHz Report No.: E202012112553-2 Application No.: E202012112553 Page 56 of 87 802.11n HT40 mode: Channel 2437MHz 802.11n HT40 mode: Channel 2452MHz Report No.: E202012112553-2 Application No.: E202012112553 Page 57 of 87 10. CONDUCTED BAND EDGES AND SPURIOUS EMISSIONS 10.1. LIMITS (d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. 10.2. TEST PROCEDURES Test procedures follow KDB 558074 D01 DTS Measurement Guidance v03r01. Remove the antenna from the EUT and then connect a low attenuation cable from the antenna port to the spectrum. 1) Remove the antenna from the EUT and then connect a low attenuation cable from the antenna port to the spectrum. 2) Set the spectrum analyzer: RBW =100KHz; VBW =300KHz, Span = 30MHz to 26.5GHz; Sweep = auto; Detector Function = Peak. Trace = Max, hold. 3) Measure and record the results in the test report. 4) The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 10.3. TEST SETUP EUT Spectrum analyzer Attenuator Report No.: E202012112553-2 Application No.: E202012112553 Page 58 of 87 10.4. TEST RESULTS 802.11b mode: Channel 2412MHz 0.03GHz-26.5GHz 2.31GHz-2.422GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 59 of 87 802.11b mode: Channel 2437MHz 0.03GHz-26.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 60 of 87 802.11b mode: Channel 2462MHz 0.03GHz-26.5GHz 2.452GHz-2.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 61 of 87 802.11g mode: Channel 2412MHz 0.03GHz-26.5GHz 2.31GHz-2.422GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 62 of 87 802.11g mode: Channel 2437MHz 0.03GHz-26.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 63 of 87 802.11g mode: Channel 2462MHz 0.03GHz-26.5GHz 2.452GHz-2.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 64 of 87 802.11n HT20 mode: Channel 2412MHz 0.03GHz-26.5GHz 2.31GHz-2.422GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 65 of 87 802.11n HT20 mode: Channel 2437MHz 0.03GHz-26.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 66 of 87 802.11n HT20 mode: Channel 2462MHz 0.03GHz-26.5GHz 2.452GHz-2.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 67 of 87 802.11n HT40 mode: Channel 2422MHz 0.03GHz-26.5GHz 2.31GHz-2.442GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 68 of 87 802.11n HT40 mode: Channel 2437MHz 0.03GHz-26.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 69 of 87 802.11n HT40 mode: Channel 2452MHz 0.03GHz-26.5GHz 2.432GHz-2.5GHz Report No.: E202012112553-2 Application No.: E202012112553 Page 70 of 87 11. RESTRICTED BANDS OF OPERATION 11.1. LIMITS Section 15.247(d) In addition, Radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). MHz MHz MHz GHz 0.090 - 0.110 1 0.495 - 0.505 2.1735 - 2.1905 4.125 - 4.128 4.17725 - 4.17775 4.20725 - 4.20775 6.215 - 6.218 6.26775 - 6.26825 6.31175 - 6.31225 8.291 - 8.294 8.362 - 8.366 8.37625 - 8.38675 8.41425 - 8.41475 12.29 - 12.293 12.51975 - 12.52025 12.57675 - 12.57725 13.36 - 13.41 16.42 - 16.423 16.69475 - 16.69525 16.80425 - 16.80475 25.5 - 25.67 37.5 - 38.25 73 - 74.6 74.8 - 75.2 108 - 121.94 123 - 138 149.9 - 150.05 156.52475 - 156.52525 156.7 - 156.9 162.0125 - 167.17 167.72 - 173.2 240 - 285 322 - 335.4 399.9 - 410 608 - 614 960 - 1240 1300 - 1427 1435 - 1626.5 1645.5 - 1646.5 1660 - 1710 1718.8 - 1722.2 2200 - 2300 2310 - 2390 2483.5 - 2500 2655…

Text truncated - open the document above for the full version.

Conducted Emission on AC mains 0.15MHz to 30MHz Radiated Spurious Emission Test（Below 1GHz） WIFI Lora Radiated Spurious Emission Test（Above 1GHz） Radiated Spurious Emission Test（Above 18GHz） -------------------------------This is the last page of the report. -----------------------