2AYZ3G6-WTSMART LOCK

TT LOCK USER MANUAL SMART LOCK FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 01 page 02 page Smart Lock Smart Lock The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play. Google Play App Store System restore factory settings Option 1: While smart lock power-on within 6 seconds, firstly press Open and then press Close button together on rear panel for 6 seconds with sounds ‘verify administrator ’, press 000 # on front panel to confirm. Option 2: From software click ‘Settings’, and then click ‘Delete’. 03 page 04 page Registration and Login By App TTLock users can use their phone number and email to register their account. Currently, TTLock App has supported the phone number registration in 159 countries and regions. When users are registering their account, the verification code will be sent to the mobile phone or the email address. After the verification is passed, the registration is successful, and then the page will jump directly to the home page. Registration and Login By App No lock bound with App There is no lock or key data in the user's account, when TTLock App is used for the first time. The user can add a lock in the front page. If A lock is already added in the account, the lock information will be displayed. lock bound with App Smart Lock Smart Lock After adding the lock successfully, the user has the highest authority of the lock, which is the administrator of the lock. The user can send the bluetooth key to others with setting the time limit, and has the right to select the limited time, permanent or one-time Bluetooth key. The key is sent to recipient's mobile phone or email and the recipient will get the key and authority of the lock in the TTLock App. Administrators can manage all the keys they send out, including clearing keys, resetting keys, sending keys, adjusting the time limit of the keys, and viewing the access records. 05 page 06 page Add Lock By App Add a lock Select “Door Lock” Light up touch screen Select lock Input lock name Operation Successfully Send Key By App Smart Lock Smart Lock 07 page 08 page Add Users By App In the main interface of the TTLock App, select Passcodes or IC Cards, and click on the upper right to add and passcodes and IC cards. You can add users for limited time or permanent access. The access records can be queried in the main interface. For example: add passcodes Passage Mode In the main interface of the app, select the passage mode in the settings, and the date of the passage mode can be set, and the start time and end time of the passage mode can also be set. After the passage mode is activated, everyone can directly unlock the door without any access permission. The passage mode can be turned off by clicking again. Smart Lock Smart Lock

Zhongshan Bafangtong Commerce Co., Ltd. 15 Haijing Rd, Shiqi Dist, Zhongshan City China Series Models Description Date: 2021/03/04 Dear Sir/Madam, We, Zhongshan Bafangtong Commerce Co., Ltd. Hereby declares the following statement for EU/US/MIC certificate, PCB board, Schematic, Hardware version, Software version, structure and internal photos are same except for the model’s name; named differently due to marketing purposes. Product name: SMART LOCK Model Number(s) G6-WT, G7-WT,G8-WT,G9-WT Sincerely yours Name / Title: James Ye / Manager Company: Zhongshan Bafangtong Commerce Co., Ltd. Address: 15 Haijing Rd, Shiqi Dist, Zhongshan City China Phone: 17666387080 Fax: / E-Mail: [email protected]

Zhongshan Bafangtong Commerce Co., Ltd. Agent Authorization Company: Zhongshan Bafangtong Commerce Co., Ltd. Address: 15 Haijing Rd, Shiqi Dist, Zhongshan City China Product Name: SMART LOCK Trade Mark: Model Number(s): G6-WT, G7-WT,G8-WT,G9-WT FCC ID: 2AYZ3G6-WT We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-03-04 Name: James Ye Title: Manager Company: Zhongshan Bafangtong Commerce Co., Ltd.

Zhongshan Bafangtong Commerce Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-03-04 Subject; Request for Confidentiality FCC ID: 2AYZ3G6-WT To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name / Title: James Ye / Manager Company: Zhongshan Bafangtong Commerce Co., Ltd. Address: 15 Haijing Rd, Shiqi Dist, Zhongshan City China Phone: 17666387080 Fax: / E-Mail: [email protected]

FCC ID: 2AYZ3G6-WT Fig. 1 Fig. 2 FCC ID: 2AYZ3G6-WT Fig. 3 Fig. 4 FCC ID: 2AYZ3G6-WT Fig. 5 Fig. 6 FCC ID: 2AYZ3G6-WT Fig. 7 Fig. 8 FCC ID: 2AYZ3G6-WT Fig. 9 Fig. 10 FCC ID: 2AYZ3G6-WT Fig. 11 Fig. 12 FCC ID: 2AYZ3G6-WT Fig. 13 Fig. 14

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L3.0cm x 1.5cm) Label Location SMART LOCK Model: G6-WT FCC ID: 2AYZ3G6-WT Input: DC 6.0V

FCC ID: 2AYZ3G6-WT Fig. 1 Fig. 2 FCC ID: 2AYZ3G6-WT Fig. 3 Fig. 4 FCC ID: 2AYZ3G6-WT Fig. 5 Fig. 6 FCC ID: 2AYZ3G6-WT Fig. 7 Fig. 8 BT Antenna FCC ID: 2AYZ3G6-WT Fig. 9 Fig. 10 NFC Antenna FCC ID: 2AYZ3G6-WT Fig. 11

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15 C (15.225) Report Reference No. .................... : FCC ID. ........................................... : GTS20210120006-1-2 2AYZ3G6-WT Compiled by ( position+printed name+signature) . : File administrators Peter Xiao Supervised by ( position+printed name+signature) . : Test Engineer Moon Tan Approved by ( position+printed name+signature) . : Manager Simon Hu Date of issue .................................... : Feb.19, 2021 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name............................ : Zhongshan Bafangtong Commerce Co., Ltd. Address ............................................ : 15 Haijing Rd, Shiqi Dist, Zhongshan City China Test specification ........................... : Standard ........................................... : FCC Part 15 C (15.225) TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : SMART LOCK Trade Mark ....................................... : Manufacturer .................................... : Zhongshan Bafangtong Commerce Co., Ltd. Model/Type reference ...................... : G6-WT List Model ........................................ : G7-WT,G8-WT,G9-WT Modulation Type ............................... : ASK Operation Frequency ....................... : 13.56 MHz Hardware Version ............................ : A1 Software Version .............................. : A1 Rating ............................................... : DC 6.0V by 4*AAA Result ............................................... : PASS Report No.: GTS20210120006-1-2 Page 2 of 23 T E S T R E P O R T Test Report No. : GTS20210120006-1-2 Feb.19, 2021 ______________________________________________________________________________________________ Date of issue Equipment under Test : SMART LOCK Model /Type : G6-WT List Model : G7-WT,G8-WT,G9-WT Applicant : Zhongshan Bafangtong Commerce Co., Ltd. Address : 15 Haijing Rd, Shiqi Dist, Zhongshan City China Manufacturer : Zhongshan Bafangtong Commerce Co., Ltd. Address : 15 Haijing Rd, Shiqi Dist, Zhongshan City China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20210120006-1-2 Page 3 of 23 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. Block Diagram of Test Setup ................................................................................................................. 6 2.6. Related Submittal(s) / Grant (s) ............................................................................................................. 6 2.7. EUT Exercise Software .......................................................................................................................... 6 2.8. Special Accessories ............................................................................................................................... 6 2.9. External I/O Cable .................................................................................................................................. 6 2.10. Modifications ........................................................................................................................................ 6 3. TEST ENVIRONMENT ..................................................................................................................................... 7 3.1. Address of the test laboratory ................................................................................................................ 7 3.2. Test Facility ............................................................................................................................................ 7 3.3. Environmental conditions ....................................................................................................................... 7 3.4. Statement of the measurement uncertainty ........................................................................................... 7 3.5. Summary o…

Text truncated - open the document above for the full version.

FCC ID: 2AYZ3G6-WT _______________________________________________________________________________________________ Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2AYZ3G6-WT _______________________________________________________________________________________________ Page 2 of 2 Fig. 3