2AZ3JR130Network Camera

Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 1 of 2 RF_754_02 15-02-2023 U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: Rhombus Systems, Inc FRN: 0030968606 Grantee Code: 2AZ3J Contact person name: Dave Gustafson Agent name: Dave Gustafson Street address: 1610 R Street #350 ZIP/City/State 95811/Sacramento/California Telephone number: +1-650-269-7258 Email address: [email protected] Signature Contact person*: Date: 12/16/2025 Signature Agent*: Date: 12/16/2025 Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 2 of 2 RF_754_02 15-02-2023 Note *Must be signed by both the applicant, and agent on behalf Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 09-02-2023 1 st version RvM 02 1 15-02-2023 Added FRN RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 16-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 19-02-2023

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_02 15-02-2023 Certification Application Attestation Statements Rhombus Systems, Inc 1610 R Street #350 CA 95811 Sacramento, United States Subject: FCC ID: 2AZ3JR130 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Rhombus Systems, Inc certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Rhombus Systems, Inc (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 12/16/2025 City: Sacramento Name (2) : Dave Gustafson Function: VP of Hardware Telephone number: +1-650-269-7258 Email address: [email protected] Signature: Revision Record Sheet: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa Page 2 of 2 RF_755_02 15-02-2023 Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvM 02 1 15-02-2023 Changed Applicant to Company and added “Subject: FCC ID: “ RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 16-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 19-02-2023

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 Declaration of Authorization We Name: Rhombus Systems, Inc Address: 1610 R Street #350 City: Sacramento, CA 95811 Country: United States Declare that: Name Representative of agent: Gary Wu (1) Agent Company name: Wendell Industrial Co., Ltd. Address: 1F, No. 119, Wugong 3rd Rd., Wugu Dist. City: New Taipei City Country Taiwan R.O.C. is authorized to apply for Certification of the following product(s): Product description: Network Camera Type designation: R130 Trademark: Rhombus Validity/ expiry date on our behalf. Date: 12/16/2025 City: Sacramento Name: Dave Gustafson (2) Function: VP of Hardware Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 02 1 02-01-2023 History sheet added AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 02 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

FCC, Request for non-disclosure Date: 23-06-2023 RF_501, Issue 11 Page 1 of 2 Company Name: Rhombus Systems, Inc Address: 1610 R Street #350 City: Sacramento, CA 95811 Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2AZ3JR130 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 12/16/2025 Name and signature of applicant: Dave Gustafson Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 23-06-2023 RF_501, Issue 11 Page 2 of 2 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 10 1 02-01-2023 History sheet added AG 11 1 & 2 23-06-2023 Corrected date and page# WJJ Issued/modified by : Willem Jan Jong Function : Team Lead Revision : 11 Date : 23-06-2023 Verified by : Axel Gase Function : Manager Quality Assurance Date : 23-06-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 23-06-2023

Report No: WD-RF-R-250245-C0 Page 1 of 10 FCC MPE Evaluation Report Report No: WD-RF-R-250245-C0 Product Name : Network Camera Model Name : R130 FCC ID : 2AZ3JR130 Applicant : Rhombus Systems, Inc. Received Date : Jul. 03, 2025 Tested Date : Jul. 17, 2025 ~ Jul. 31, 2025 Applicable Standard : 47 CFR FCC Part 2.1091 47 CFR FCC Part 1.1310 KDB 447498 D01 OET Bulletin 65 Supplement C Wendell Industrial Co., Ltd Wendell EMC & RF Laboratory Caution: This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment. Please note that the measurement uncertainty are provided for informational purpose only and are not used in determining the Pass/Fail results. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of Wendell Industrial Co., Ltd.. Report No: WD-RF-R-250245-C0 Page 2 of 10 Test Report Issued Date: August 1, 2025 Project No.: 25Q071501 Product Name Network Camera Trade Name Rhombus Systems, Inc. Model Name R130 FCC ID 2AZ3JR130 Applicant Rhombus Systems, Inc. Manufacturer VIVOTEK INC. EUT Rated Voltage POEaf 37.0–57.0 V EUT Test Voltage RSE：PoE 54V, AC Conduction：AC 120V / 60Hz EUT Supports Radios Application Bluetooth BR/EDR/LE Applicable Standard 47 CFR FCC Part 2.1091 47 CFR FCC Part 1.1310 KDB 447498 D01 OET Bulletin 65 Supplement C RF Evaluation 0.00266 mW/cm 2 Test Result Complied Documented : ( Specialist / Emma Lu ) Technical Engineer : ( Section Manager / Jason Hsieh ) Approved : ( Project Manager / Gary Wu ) Report No: WD-RF-R-250245-C0 Page 3 of 10 Table of Contents Document Revision History ................................................................................................................. 4 Reference Testing Standard ................................................................................................................. 5 1 Generation Information .............................................................................................................. 6 1.1 Applicant .................................................................................................................................... 6 1.2 Manufacturer ............................................................................................................................. 6 1.3 Description of Equipment under Test ...................................................................................... 6 1.4 Test Facility ................................................................................................................................ 7 2 Mobile device Assessment Procedure ......................................................................................... 8 3 RF Exposure Assessment ............................................................................................................. 8 4 Limit Requirement ...................................................................................................................... 9 5 Test Results ................................................................................................................................. 10 Report No: WD-RF-R-250245-C0 Page 4 of 10 Document Revision History Report No. Issue date Description WD-RF-R-250245-C0 August 1, 2025 Initial report Report No: WD-RF-R-250245-C0 Page 5 of 10 Reference Testing Standard Standard Description Version 47 CFR FCC Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. -- 47 CFR FCC Part 1.1310 Radiofrequency radiation exposure limits. -- KDB 447498 D01 RF Exposure procedures and equipment authorization policies for mobile and portable devices. V06 OET Bulletin 65 Supplement C Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields. Edition 01-01 Report No: WD-RF-R-250245-C0 Page 6 of 10 1 Generation Information 1.1 Applicant Rhombus Systems, Inc. 1910 R Street, Suite 350, Sacramento, CA 95811 1.2 Manufacturer VIVOTEK INC. 5F, No.168, Lien-Cheng Rd., Chung-Ho , New Taipei City, 235, Taiwan, R.O.C 1.3 Description of Equipment under Test Product Name Network Camera Model No. R130 FCC ID 2AZ3JR130 Frequency Range Bluetooth BR/EDR/LE: 2402~2480MHz Antenna Information Refer to the table “Antenna List” The above equipment was tested by Wendell EMC & RF Laboratory For compliance with the requirements set forth in 47 CFR § 2.1091 / 47 CFR § 1.1310. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties Antenna List No. Manufacturer Model No. Antenna Type Peak Gain 1 ARISTOTLE ENTERPRISES INC. RFA‐02‐JP585‐70‐140 FPC Antenna 1.78 dBi for 2.4GHz 2 INPAQ TECHNOLOGY CO., LTD. RFFPA382214IMAB401 FPC Antenna 1.76 dBi for 2.4 GHz Note：This EUT will be equipped with two antenna models. Since both models are of the same type, the antenna with the higher gain will be used for testing. Report No: WD-RF-R-250245-C0 Page 7 of 10 1.4 Test Facility Items Required (IEC 60068-1) Temperature (C) 15-35 Humidity (% RH) 25-75 Barometric pressure (mbar) 860-1060 Description: Accredited by TAF Accredited Number: 2965 Issued by: Wendell Industrial Co., Ltd Company Address: 6F/6F-1, No.188, Baoqiao Rd., Xindian Dist., New Taipei City 23145, Taiwan R.O.C Test Lab: Wendell EMC & RF Laboratory Lab Address: 5F-1, No.188, Baoqiao Rd., Xindian Dist., New Taipei City 23145, Taiwan R.O.C Test Location: No. 119, Wugong 3rd Rd., Wugu Dist., New Taipei City 248…

Text truncated - open the document above for the full version.

亞 驪 企 業 股 份 有 限 公 司 ARISTOTLE ENTERPRISES 承 認 申 請 書 客戶名稱: Customer 晶睿通訊股份有限公司 廠商料號: Part No. RFA-02-JP585-70-140 品名: Description 2.4GHz 圖號: Drawing No. RFA-02-JP585-70-140 客戶料號: Drawing No. 631444200G 出廠簽章: 檢 查 TEST BY 核 對 CHECK BY 承 認 APPROVE BY 張家福 蔡銘中 廖煥文 承認簽章: 檢 查 TEST BY 核 對 CHECK BY 承 認 APPROVE BY 地址:新北市中和區莒光路63號8樓 電話:02-2225-8209 傳真:02-2225-7523 表單編號：QP-0603-F02 版本：A ROHS COMPLIANCE 8F, No.63, Juguang Rd, Zhonghe Dist, New Taipei City 235, Taiwan, R.O.C. Tel : +886-2-2225-8209 Fax: +886-2-2225-7523 www.aristotle.com.tw RFA‐02‐JP585‐70‐140 Specifications Frequency range 2400 ‐ 2500 MHz Peak gain 1.78 dBi Average gain ‐1.87 dBi VSWR 2.0: 1 Max. Polarization Linear, vertical Impedance 50 Ω Connector IPEX Cable Ø1.13 Environment & Mechanical Characteristics Temperature ‐ 10°C to +55°C Humidity 95％ @ 25°C VSWR 8F, No.63, Juguang Rd, Zhonghe Dist, New Taipei City 235, Taiwan, R.O.C. Tel : +886-2-2225-8209 Fax: +886-2-2225-7523 www.aristotle.com.tw Radiation Pattern 亞驪企業股份有限公司 2 文件 編號 文件 名稱 C774_ RFA‐02‐JP585‐70‐140 發行版本 A 頁次 1/1 客戶代號： C774 最小包裝 PCS 50 客戶料號 / 品名： 631444200G 中包裝 PCS 200 亞驪料號 / 品名： RFA‐02‐JP585‐70‐140 大包裝 PCS 2000 相關配件 備註 1. 最小包裝 ( 50PCS - 夾鏈袋 ) 2. 中包裝 ( 200PCS‐PE 袋 ) 示意圖 示意圖 3. 大包裝 ( 2000PCS‐1 箱 ) 4. 示意圖 標籤 標籤 --2-- 追求卓越 双赢互惠 一、产品结构 二、编码原则 产品规格 单位 厚度 总厚度 μm 63 Cu厚度 μm 18 AD厚度 μm 20 PI厚度 μm 25 结构图 -1 铜箔颜色：“”=黑色 -1=红色 H S 10 20 13 18 18 Q B C J B 公司名称:山东金鼎电子Shandong Golding Electronics Materials Co.,LTD G 产品类别：H=无卤阻燃型 产品类型：D=双面FCCL,S=单面FCCL PI 厚度：05=12.5μm,10=25μm 胶粘剂厚度：13=13μm,20=20μm 铜箔厚度：12=12μm,18=18μm,35=35μm 铜箔供应商 PI供应商 铜箔类型：A=压延,B=电解 Cu AD PI --3-- 追求卓越 双赢互惠 三、质量规格 项目 单位 质量规格 实测 测试方法 厚度 μm 63±5 63±3 JIS C 6471-1995 6.2 剥离强度 N/mm ≥1.0 ≥1.0 IPC-TM-650 2.4.9 耐焊性 \ 300°C×10sec PASS IPC-TM-650 2.4.13 尺寸稳定性 % TD：±0.15 PASS IPC-TM-650 2.2.4 MD：±0.15 PASS IPC-TM-650 2.2.4 体积电阻率 Ω.cm ≥1.0×10 13 ≥2.0*10 13 JIS C 6471-1995 7.1 表面绝缘电阻 Ω ≥1.0×10 11 ≥2.0*10 11 JIS C 6471-1995 7.2 表面耐电压AC500V \ 无飞弧 PASS JIS C 6471-1995 7.3 层间耐电压AC500V \ 无绝缘层破坏 PASS JIS C 6471-1995 7.4 介电常数 \ ≤4.0 3.2-3.5 JIS C 6471-1995 7.5 耐酸2mol/LHCl \ 10min PASS IPC-TM-650 2.3.2 耐碱2mol/L NaOH \ 10min PASS IPC-TM-650 2.3.2 耐溶剂 (MEK、IPC) \ 10min PASS IPC-TM-650 2.3.2 四、保存环境及保存期限 1、保存环境：温度：（25±10）°C，湿度：（50±20）%，无化学腐蚀气体。 2、保存期限：一年 467MP Transfer Tape Product Data Sheet Updated : February 1999 Supersedes: February 1996 Product Description A-30 is a firm acrylic pressure-sensitive adhesive system. It features high ultimate bond strength with excellent high temperature performance and excellent solvent resistance. Bond strength increases substantially with natural ageing. 467 is a long ageing resistant product used extensively by the nameplate industry. Physical Properties Not for specification purposes Adhesive Type Firm Acrylic 3M ref : A-30 Thickness (ASTM D-3652) Tape Liner Total 50 μm 2 Thou 100 μm 150 μm Release Liner Tan printed polycoated paper. Tape Colour Clear Shelf Life 12 months from date of despatch by 3M when stored in the original carton at 21°C (70°F) & 50 % Relative Humidity Performance Characteristics Not for specification purposes Adhesion to Stainless Steel ASTM D-3330 5.5 N/10mm Shear Resistance High Temperature Performance Max : Minutes / Hours Max : Days / Weeks Minimum 204 °C 149 °C -30 °C Solvent Resistance Excellent. When the adhesive is properly applied to impervious materials, it will resist solvent attack and adhesive softening through edge contact with mild acids and alkalines, oils, grease, gasoline kerosene, JP-4 fuel, and many other standard aromatic and aliphatic solvents. However, it is not recommended for uses where continuous immersion is required. 2 Date : February 1999 467MP Transfer Tape Performance Characteristics (Cont..) Not for specification purposes UV Light Resistance Excellent. Will not oxidise when exposed to air or sunlight UV. Water Resistance Excellent. There are no evident adverse effects on the bond of properly applied materials after immersion in 21°C water for about 100 hours. Additional Product Information The legend Hi Performance No. 467 is imprinted on the release liner. 467MP is designed with a moisture resistant release liner which resists cockling or wrinkling from high humidity. The 50 micron thick adhesive is ideally suited for joining materials that are relatively smooth, thin and have low residual stress. If rough or thick materials with a small degree of residual stress are to be joined, then the 130 micron thick adhesive should be considered Application Techniques 1. Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesive contact & thus improves bond strength. 2. To obtain optimum adhesion, the bonding surfaces must be clean dry and well unified. A typical surface cleaning solvent is isopropyl alcohol & water. Use proper safety precautions for handling solvents. 3. Ideal tape application temperature range is 21°C to 38°C (70°F to 100°F). Initial tape application to surfaces at temperatures below 10°C (50°F) is not recommended because the adhesive becomes too firm to adhere readily. However once properly applied low temperature holding is generally satisfactory. Applications 467MP is well suited for bonding together a wide variety of similar and dissimilar materials such as metals, paints, wood, glass and some plastics. An excellent adhesive for mounting nameplates and decorative trim. Automotive Industry. Specifications This tape meets the requirements of U.S. Government specification MIL-P-19834, Amendment 1, Type 1. 467MP is a UL and AGA recognised product. 3M is a trademark of the 3M Company. Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M cannot accept any responsibility or liabili…

Text truncated - open the document above for the full version.

Test Report. No. TAOEC2107771001 Date: 07 Jan 2022.Page 8 of 8. Sample photo:. TAOEC2107771001 TAO21-077710.001. SGS authenticate the photo on original report only. *** End of Report ***. Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 1 of 8. 3M CHINA LIMITED. 222 TIANLIN ROAD, SHANGHAI . . The following sample(s) was/were submitted and identified on behalf of the clients as : 3M 467MP. SGS Job No. :SP21-027405 - SH. Model No. :.3M 467MP. Client Ref. Information :.3M 468MP, 3M 467MC, 3M 468MC, 3M 467MPF, 3M 468MPF. Date of Sample Received :.30 Aug 2021. Testing Period :.30 Aug 2021 - 04 Sep 2021. Test Requested :.Selected test(s) as requested by client.. Please refer to next page(s).. Please refer to next page(s).. Test Method :. Test Results :. Conclusion :. Based on the performed tests on submitted sample(s), the results of Cadmium, Lead, Mercury, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) and Phthalates such as Bis(2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP), Dibutyl phthalate (DBP) and Diisobutyl phthalate (DIBP) comply with the limits as set by RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU.. Dora Hu. Approved Signatory. Signed for and on behalf of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.. Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 2 of 8. Test Results :. Test Part Description :. Specimen No..SGS Sample ID.Description. SN1.SHA21-187289.001Colorless transparent adhesive film. Remarks :. (1) 1 mg/kg = 0.0001%. (2) MDL = Method Detection Limit. (3) ND = Not Detected ( < MDL ). (4) "-" = Not Regulated. RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. Test Method :.With reference to IEC 62321-4:2013+AMD1:2017, IEC62321-5:2013, IEC62321-7-2:2017, IEC 62321-6:2015 and IEC62321-8:2017, analyzed by ICP-OES, UV-Vis and GC-MS.. 001. Cadmium (Cd).100mg/kg.2ND. Lead (Pb).1000mg/kg.2ND. Mercury (Hg).1000mg/kg.2ND. Hexavalent Chromium (Cr(VI)).1000mg/kg.8ND. Sum of PBBs.1000mg/kg.-ND. Monobromobiphenyl.-mg/kg.5ND. Dibromobiphenyl.-mg/kg.5ND. Tribromobiphenyl.-mg/kg.5ND. Tetrabromobiphenyl.-mg/kg.5ND. Pentabromobiphenyl.-mg/kg.5ND. Hexabromobiphenyl.-mg/kg.5ND. Heptabromobiphenyl.-mg/kg.5ND. Octabromobiphenyl.-mg/kg.5ND. Nonabromobiphenyl.-mg/kg.5ND. Decabromobiphenyl.-mg/kg.5ND. Sum of PBDEs.1000mg/kg.-ND. Monobromodiphenyl ether.-mg/kg.5ND. Dibromodiphenyl ether.-mg/kg.5ND. Tribromodiphenyl ether.-mg/kg.5ND. Tetrabromodiphenyl ether.-mg/kg.5ND. Test Item(s).Limit.Unit.MDL. Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 3 of 8. Test Item(s).Limit.Unit.MDL.001. Pentabromodiphenyl ether.-mg/kg.5ND. Hexabromodiphenyl ether.-mg/kg.5ND. Heptabromodiphenyl ether.-mg/kg.5ND. Octabromodiphenyl ether.-mg/kg.5ND. Nonabromodiphenyl ether.-mg/kg.5ND. Decabromodiphenyl ether.-mg/kg.5ND. Di-butyl Phthalate (DBP).1000mg/kg.50ND. Benzyl Butyl Phthalate (BBP).1000mg/kg.50ND. Di-2-Ethyl Hexyl Phthalate (DEHP).1000mg/kg.50ND. Diisobutyl Phthalates (DIBP).1000mg/kg.50ND. Notes :. (1) The maximum permissible limit is quoted from RoHS Directive (EU) 2015/863. IEC 62321 series is equivalent to EN 62321 series https://www.cenelec.eu/dyn/www/f?p=104:30:1742232870351101::::FSP_ORG_ID,FSP_LANG_ID: 1258637,25 (2) The restriction of DEHP, BBP, DBP and DIBP shall apply to medical devices, including in vitro medical devices, and monitoring and control instruments,including industrial monitoring and control instruments, from 22 July 2021.. Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 4 of 8. ATTACHMENTS Elements (IEC62321) Testing Flow Chart 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. Sample Preparation Sample Measurement ICP-OES/AAS Solution Filtration Residue 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve Acid digestion with microwave/ hotplate DATA Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 5 of 8. ATTACHMENTS Hexavalent Chromium (Cr(VI)) Testing Flow Chart Sample Preparation Sample Measurement Metallic material DATA UV-Vis Boiling water extraction Adding 1,5- diphenylcarba zide for color development Adding 1,5- diphenylcarbazide for color development UV-Vis Nonmetallic material Dissolving by ultrasonication pH adjustment DATA ABS/PC/PVC Others Digesting at 150~160°C Digesting at 60°C by ultrasonication Separating to get aqueous phase Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 6 of 8. ATTACHMENTS PBBs/PBDEs Testing Flow Chart Sample cutting/preparation Sample measurement Solvent extraction Concentration/ Dilution of extraction solution Filtration GC-MS DATA Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 7 of 8. ATTACHMENTS Phthalates Testing Flow Chart Sample cutting/preparation Sample measurement Solvent extraction Concentration/Dilution Filtration GC-MS DATA Test Report. No. SHAEC2118728901 Date: 04 Sep 2021.Page 8 of 8. Sample photo:. SHAEC2118728901 SHA21-187289.001. SGS authenticate the photo on original report only. *** End of Report ***. Test Report測試報告 Number 報告號碼 : TWNC01046253 Authorized By: Signed by: On behalf of Intertek Testing Services Taiwan Limited Matt Wang Thomas Chou Director Manager *THJ1046253* Page 1 of 20 Intertek Testing Services Taiwan Ltd. 全國公證檢驗股份有限公司 8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 114690, Taiwan, R.O.C. 114690台北市內湖區瑞光路423號8樓 Tel: (+886-2) 6602-2888．2797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com Applicant: 申請廠商 WONDERFUL HI-TECH CO., LTD. 萬泰科技股份有限公司 Issue Date 報告發行日期 : Jan 11, 2022 No.17, Beiyuan Rd., Zhongli Dist., Taoyuan City 320, Taiwan (R.O.C.) 桃園市中壢區工業區北園路17號 Sample Description樣品敘述: One (1) Group of Submitted Samples Said To Be : 以下測試樣品乃供應商所提供及確認: Sample Submitted By 送樣廠商 : WONDERFUL HI-TECH CO., LTD. 萬泰科技股份有限公司 Sample Description 樣品名稱 : RF COAXIAL CABLE RG-6U, RG-59, RG-11, 12G-SDI, RG-58A/U, RG-142/U, RG-178 B/U, RG-179/U, RG-316U, MINI 0.8mm, 0.98mm, 1.13mm, 1.27mm, 1.32mm, 1.37mm, 1.48mm, 1.13LL, 1.…

Text truncated - open the document above for the full version.

Report No: WD-RF-R-250245-B0 Page 1 of 51 FCC Test Report Report No: WD-RF-R-250245-B0 Product Name : Network Camera Model Name : R130 FCC ID : 2AZ3JR130 Applicant : Rhombus Systems, Inc. Received Date : Jul. 03, 2025 Tested Date : Jul. 17, 2025 ~ Jul. 31, 2025 Applicable Standard : 47 CFR FCC Part 15, Subpart C (Section 15.247) KDB 558074 D01 DTS Meas. Guidance v05 ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+Errata to C63.10a-2024 Wendell Industrial Co., Ltd Wendell EMC & RF Laboratory Caution: This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment. Please note that the measurement uncertainty are provided for informational purpose only and are not used in determining the Pass/Fail results. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of Wendell Industrial Co., Ltd.. Report No: WD-RF-R-250245-B0 Page 2 of 51 Test Report Issued Date: August 1, 2025 Project No.: 25Q071501 Product Name Network Camera Trade Name Rhombus Systems, Inc. Model Name R130 FCC ID 2AZ3JR130 Applicant Rhombus Systems, Inc. Manufacturer VIVOTEK INC. EUT Rated Voltage POEaf 37.0–57.0 V EUT Test Voltage RSE：PoE 54V, AC Conduction：AC 120V / 60Hz EUT Supports Radios Application Bluetooth BR/EDR/LE Applicable Standard 47 CFR FCC Part 15, Subpart C (Section 15.247) KDB 558074 D01 DTS Meas. Guidance v05 ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+Errata to C63.10a-2024 Output Power 7.55 dBm Test Result Complied Documented : ( Specialist / Emma Lu ) Technical Engineer : ( Section Manager / Jason Hsieh ) Approved : ( Project Manager / Gary Wu ) Report No: WD-RF-R-250245-B0 Page 3 of 51 Table of Contents Document Revision History ................................................................................................................. 5 Summary of Test Result ....................................................................................................................... 6 1 Generation Information .............................................................................................................. 7 1.1 Applicant .................................................................................................................................... 7 1.2 Manufacturer ............................................................................................................................. 7 1.3 Description of Equipment under Test ...................................................................................... 7 1.4 Test Mode Applicability And Tested Channel Detail .......................................................... 10 1.5 Configuration of Tested System ............................................................................................. 12 1.6 EUT Exercise Software ........................................................................................................... 13 1.7 Tested System Details .............................................................................................................. 13 1.8 Test Facility .............................................................................................................................. 14 1.9 Measurement Uncertainty ...................................................................................................... 15 1.10 List of Test Equipment ............................................................................................................ 16 2 Test Result .................................................................................................................................. 20 2.1 …

Text truncated - open the document above for the full version.