2AZ4Y-RX09-2Smart Resistance Band

Indicator Icons Silent mode Status bar indicator icon Battery status Device not paried/Device paired App not connected/App connected How to Use with Door Anchor Ta r e If the value is not zero when the device is stationary and not stretched, please tare the your device as following steps: 1. Tap the Tare button when the device is not being used or stretched. 2. The device will automatically resume to zero. 1. Place the door anchor at the top, middle and bottom of the door, close the door and lock it. 2. Please close and lock the door and hang the attached warning card. 3. Ensure the carabiner of the band is fastened with door anchor. How to Use Ankle and Wrist Bands How to Use the Object Anchor 1. Tighten the Object Anchor in the fixing position, pass one end of the object anchor through the fixing ring and pull it tightly, then lock the carabiner of the resistance band into the buckle of the object anchor. To prevent danger during movement, please ensure the fixed point can withstand your pulling weight. 2. After fastening the resistance band, pull the fixed point and the band to ensure that the carabiner is properly fastened to the object anchor. *Make sure the carabiner is properly and securely fastened to the object anchor buckle. Safety Instructions 1. Please don't continue exercising if you feel pain or discomfort. 2. Please don't use the device if your hands are greasy, wet or overly sweaty. 3. Please don't push yourself too far beyond your comfort zone. 4. Please don't use the device if a band or any other element is damaged. 5. Please don't allow children under the age of 16 to use the device. 6. Please don't stretch the bands more then 2.5 times. 7. Please don't expose the device to direct sunlight, rain or snow. 8. Please don't leave the device exposed outdoors for an extended period of time. 9. Please don't use strong chemical agents or cleaners, which may discolor or damage your device. 10. Please don't bend or yank the plug or power cord from the electrical outlet. 11. Please don't download and install any firmware from an unauthorized provider. This may cause the device to malfunction or become incompatible, which would void the product warranty. 12. Please don't use the device if any of the components are worn or damaged. 13. Please don't use an anchoring point that causes excessive friction or wear to the the device. 14. Please don't expose your device to high temperatures. 7 9 8 10 11 User Manual Smart Resistance Band Rally X3 Pro Product Parameters Product Composition Note: Please ensure you have all accessories. Figure 1 Figure 2 A. Resistance Bands 1. Carabiner 2. Pulley 3. Resistance Adjuster 4. Resistance Band 5. Smart Sensor (with screen) 6. Smart Sensor 7. Power Button 8. Speaker 9. TYPE - C Charging Port B. Hand Grip X2 C. Wrist Band X2 D. Ankle Band X2 E. Door Anchor F. Object Anchor G. Carrying Bag H. Charging Cable I. Warning Card Charging Paired Pairing App Connected Successfully Low Battery Charged Sleep Mode Red-green blinking Fast red-blue blinking Green light blinking Jade-green blinking Fast red blinking Green steady No blinking Sensor Indicator Status Indicator Connecting the App Before installing the App make sure: 1. Your phone is connected to a Wi-Fi network or cellular network. 2. Your phone has Bluetooth turned on. After installation has completed, open the App and set up your WeGym account by following prompts: Search for "WeGym" in your App store or simply scan the QR code to download and install the App 1. On the homepage tap the "+" icon in the top right hand corner. 2. Your smartphone will automatically search using Bluetooth. 3. Your device should appear. Select it to connect. 4. Your device should successfully connect. 450mm 75mm 145mm 1 2 3 4 6 7 58 9 A BF G HI C D E 2 3 4 5 6 Implementation standards: Q/OSL-JS01-2021 GB 4943.1-2011 Name Model Maximum Resistance User Safety Resistance Connectivity Input Port Dc Input Smart Resistance Band Rally X3 Pro 10~110Lbs 120Lbs Android，iOS TYPE-C 5V Charge Time2 Hours *Safety Tips: Please use a standard 5V wall charger with safety certification. CapacityLithium ion 3.7V, 300mAh/580mAh Playtime Dimensions Ambient temperature Bluetooth Frequency Bluetooth Version Bluetooth Physical Range BLE5.1 33 FEET 1.4 ", 240 x240 Resolution (Touch Screen) About 9 Hours 14°F TO 122°F 2.4GHz 尺寸：145*75 总长525mm 材质：90g哑粉纸 四色印刷 Pairing Instructions 1. Power on: Short press power button. 2. Pairing: You will need to pair your device when using it for the first time. To pair, simply long press the power button on both devices for 3 seconds to enter pairing mode, after paring successfully, the paring icon will be lit up on the display. If the pairing fails, repeat this step. (Figure 1) 3. Screen on/screen off: Short press the power button. Operational Tips: | Not selecting an operation or using the bands within 30 seconds of the screen turning on will result in the screen automatically turning off. | Not selecting an operation or using the bands after the screen has turned off will result in your device automatically turning off after 15 minutes. | After the initial pairing, you should not need to pair it again. 1. Put on the ankle/wrist bands around your ankle/wrist, securely fasten the velcro strap. 2. Securely attach the carabiner to the loop of the ankle/wrist band. * Before use, make sure the carabiner is properly and securely fastened to the wrist band. Pull the resistance band hard to ensure that the device is securely connected. 12 FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and fou…

Text truncated - open the document above for the full version.

Code:AB-RF-05-b ExternalPhotograph Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b

LabelLocationOnEUT Label FCCID:2AZ4Y-RX09-2

Code:AB-RF-05-b InternalPhotograph Code:AB-RF-05-b ANT Code:AB-RF-05-b

version01 ShenzhenOsmartlinkTechnologyCo.,Ltd. DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:RallyX3Pro,RX09,RX10,RX11,RX12,RX13,RX15,RX16,RX17,RX18, RX19,RX20,RX21,RX22,RX23,RX25 FCCID:2AZ4Y-RX09-2 fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsforinternalantennatype(s) describedbelow: ModelNo.ofantenna:V5_PCB1_V02 Typeofantenna:PCBantenna Gainoftheantenna:-0.35dBi Frequencyrange:2402-2480MHzMHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:DongGuanBingoElectronicsCo.,Ltd. Address:BingoElectronicsafterthevillagecommittee,ShuibeiVillage,ShipaiTown, Dongguan,China City:Shenzhen ZIP/Postalcode:/ Country:China Place:ShenzhenDate:10/8/2022 Signature:

V5_PCB2_V02 Freq (MHz) Effi (%) Gain (dBi) 240026.54-0.88 241024.59-1.25 242025.83-1.15 243027.81-0.9 244027.5-0.93 245030.03-0.73 246026.18-1.12 247025.4-1.16 248025.64-1.05 249026.34-0.81 250023.16-0.35

RFEXPOSUREEVALUATION FCCID:2AZ4Y-RX09-2 AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 24021.731.73 ±1 2.73050.5813 GFSK24401.411.41±1 2.410 5 0.5443 24800.630.63±1 1.630 5 0.4583 Result:NoStandaloneSARtestisrequired.

Page1of23 AppendixTestData ReportNo.:18220WC20212201TestSampleNo.:1-2-2 StartTestDate:2022.9.7FinishTestDate:2022.9.13 TestEngineer:Auditor: Temperature:27.3 °C RelativeHumidity:47% Pressure:1012hPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24020.6842401.6682402.3520.5PASS 24400.6922439.6442440.3360.5PASS 24800.6762479.6602480.3360.5PASS Page2of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page3of23 Page4of23 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz] OCB[MHz] FL[MHz]FH[MHz] BLE_1MAnt1 24021.02962401.49612402.5257 24401.02662439.49622440.5228 24801.03072479.49592480.5266 Page5of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page6of23 Page7of23 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntennaFrequency[MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt1 24021.73≤30PASS 24401.41≤30PASS 24800.63≤30PASS Page8of23 TestGraphsPeak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page9of23 Page10of23 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt1 2402-13.43≤8.00PASS 2440-13.65≤8.00PASS 2480-14.41≤8.00PASS Page11of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page12of23 Page13of23 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 Low24020.92-57.42≤-19.08PASS High2480-0.16-57.8≤-20.16PASS Page14of23 TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 Page15of23 AppendixF:ConductedSpuriousEmission TestResult TestMod e Antenn a Frequency[MHz ] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 2402 Reference-0.14-0.14---PASS 30~1000-0.14-70.15≤-30.14PASS 1000~2650 0 -0.14-54≤-30.14PASS 2440 Reference0.050.05---PASS 30~10000.05-69.71≤-29.95PASS 1000~2650 0 0.05-54.24≤-29.95PASS 2480 Reference-0.80-0.80---PASS 30~1000-0.80-69.13≤-30.8PASS 1000~2650 0 -0.80-54.48≤-30.8PASS Page16of23 TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Page17of23 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 Page18of23 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference Page19of23 BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Page20of23 Page21of23 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt1 24020.380.6360.322.20 24400.380.6360.322.20 24800.380.6360.322.20 Page22of23 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page23of23 ---End---

ReportNo.:18220WC20212201FCCID:2AZ4Y-RX09-2Page1of30 Code:AB-RF-05-b FCCTestReport ClientName:ShenzhenOsmartlinkTechnologyCo.,Ltd. ClientAddress: 702,BuildingB,Block1,Phase1,Shenzhen InternationalInnovationValley,Xingke1st Street,NanshanDistrict,Shenzhen,China ProductName:SmartResistanceBand ReportDate:Oct.08,2022 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC20212201FCCID:2AZ4Y-RX09-2Page2of30 Code:AB-RF-05-b Contents 1.GeneralInformation ............................................................................................................................................6 1.1.ClientInformation ....................................................................................................................................6 1.2.DescriptionofDevice(EUT) ..................................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest .................................................................................................7 1.4.DescriptionofTestConfiguration ..........................................................................................................7 1.5.DescriptionOfTestSetup ......................................................................................................................8 1.6.TestEquipmentList .................................................................................................................................9 1.7.MeasurementUncertainty ....................................................................................................................10 1.8.DescriptionofTestFacility ...................................................................................................................10 2.SummaryofTestResults .................................................................................................................................11 3.ConductedEmissionTest ................................................................................................................................12 3.1.TestStandardandLimit ........................................................................................................................12 3.2.TestSetup ...............................................................................................................................................12 3.3.TestProcedure .......................................................................................................................................12 3.4.TestData .................................................................................................................................................12 4.RadiationSpuriousEmissionandBandEdge .............................................................................................15 4.1.TestStandardandLimit ........................................................................................................................15 4.2.TestSetup ...............................................................................................................................................15 4.3.TestProcedure .......................................................................................................................................16 4.4.TestData .................................................................................................................................................17 5.MaximumPeakOutputPowerTest ...............................................................................................................25 5.1.TestStandardandLimit ........................................................................................................................25 5.2.TestSetup ...............................................................................................................................................25 5.3.TestProcedure .......................................................................................................................................25 5.4.TestData .................................................................................................................................................25 6.6DBOccupyBandwidthTest ..........................................................................................................................26 6.1.TestStandardandLimit ........................................................................................................................26 6.2.TestSetup ...............................................................................................................................................26 6.3.TestProcedure .......................................................................................................................................26 6.4.TestData .................................................................................................................................................26 7.PowerSpectralDensityTest ...........................................................................................................................27 7.1.TestStandardandLimit ........................................................................................................................27 7.2.TestSetup ...............................................................................................................................................27 7.3.TestProcedure .......................................................................................................................................27 7.4.TestData .................................................................................................................................................27 8.100kHzBandwidthofFrequencyBandEdgeRequirement ......................................................................28 ReportNo.:18220WC20212201FCCID:2AZ4Y-RX09-2Page3of30 Code:AB-RF-05-b 8.1.TestStandardandL…

Text truncated - open the document above for the full version.

Code:AB-RF-05-b TestSetupPhotograph PhotoofConductedEmissionMeasurement PhotoofRadiationEmissionTest Code:AB-RF-05-b