2AZ6G-BQIFT300NNIU E-BIKE

V 1.0 NIU E-BIKE USER MANUAL MANUEL UTILISATEUR DE VÉLO ÉLECTRIQUE NIU MANUAL DE USUARIO DE BICICLETAS ELÉCTRICAS NIU Manufacturer: Jiangsu Niu Electric Technology Co., Ltd. Importer: BESENDER INC Address: 5199 Brooks st. Suite G Montclair CA 91763 Manufacturer: Jiangsu Niu Electric Technology Co., Ltd. Importer: Traffic Trends Address: 80 Rue Prince arthur est, Montreal, Quebec, Canada H2X1B3 Contact [email protected] Keep your E-bike serial number on hand when contacting us. NIU E-BIKE USER MANUAL 01 CONTENTS Before riding Packing list Assembly instruction Display functions Downloading the App Warnings Troubleshooting User maintenance instructions Moving and storage instructions Specifications After-sales services 01 04 06 12 16 20 26 27 28 29 31 Original instructions. Before riding Thank you for choosing the BQi Fat Tire 300 electrically assisted pedal cycle (EAPC). Please read this user manual carefully before riding and take note of the advice within. Please do not start riding,before you are familiar with this product's performance. Please read the important safety precautions provided in this user manual carefully and abide by the local laws and regulations during your ride to ensure safety. • Please read this user manual carefully and do not start riding until you are well acquainted with this bicycle's features. • This EAPC is a vehicle and shares the potential safety risks that all vehicles have. Please use this product in accordance with the instructions and warnings listed in this user manual to ensure your and others' safety to the maximum extent, and please abide by the national and local laws and regulations. • However, your full compliance with this user manual does not fully exclude the risks caused by non-compliant or improper operation by other people or of other vehicles.Like all other vehicles, the higher the EAPC's speed, the longer the braking distance. It is essential for you to stay alert and keep a proper speed and distance from other people and vehicles during your ride. Please stay vigilant before you enter unfamiliar terrain and maintain a low speed. • Please respect pedestrians' right of way while riding. Avoid startling pedestrians, especially children. When you are about to pass a pedestrian from behind them, alert the pedestrian and slow down when you pass them. Try to pass any pedestrians from their left side as much as possible (applicable to countries and regions where vehicles drive on the right). When you come face to face with a pedestrian, stay on the right side of the pedestrian and slow down when you pass. Do not park the bicycle at building foyers, evacuation stairs, and safety exits after use. Please park properly in accordance with the safety rules. One-handed riding is prohibited! 0203 Max.140 KG! Riding in excess of the maximum load of the bicycle body (140 kg) is prohibited. • Please make sure you wear a safety helmet and abide by the traffic rules during the ride. Cycling on motor vehicle lanes or roads with many pedestrians is prohibited. Please check the tire pressure before riding. The recommended tire pressure range is less than 40 psi. The speed on downhill or unpaved roads should be kept at or below 15 km/ h. • Please check the EAPC's basic conditions before each ride.Under any conditions that may undermine the riding safety, such as loose or damaged parts, significantly reduced battery life, tire leakage or excessive wear, and abnormal noise or alarm of the bicycle, please stop using the bicycle immediately. Never ride under. these conditions. Riding in excess of the maximum load of the bicycle body (140 kg) is prohibited. • Do not lend the bicycle to someone who does not know how to use it. Before you start riding, check whether the brakes work properly. When you brake, please use the rear brake first, and then the front brake. Remember to check the brake tightness. When the brakes are too loose, use an Allen wrench to tighten them. Increase the braking distance when you ride in rain or snow. • Suggested user age: 18 and up. • Off-road riding requires close attention and specific skillsand it presents variable conditions and hazards. • Wear appropriate safety gear and don’t ride alone in remote areas. Check local rules and regulations about whether off-road ebike riding is allowed.Wet weather: • It is recommended to not ride in wet weather if avoidable. If you had to ride in wet weather, please pay attention to the following: • Before riding, check whether the various functions of the bicycle can work normally, especially the brakes. • In wet weather you need to take extra care when operating this bike. • Decrease riding speed to help you control the bike in slippery conditions. • Brake earlier since it will take longer to slow than when operated in dry conditions. • Take care to be more visible to others on the road. Wear reflective clothing and use approved safety lights. • Road hazards are more difficult to see when wet, proceed with caution. Night Riding: It is recommended to not ride at night if avoidable. If you had to ride at night, please pay attention to the following: • Wear reflective and light-colored clothing. • Slow down and use familiar roads with street lighting, if possible. • Ensure tire wall, pedal, and other reflectors are installed and unobstructed. • Ensure the bike is equipped with head and tail lights and works properly. 0405 Packing list ChargerCycling kit tool kit 变速器保护架 Step-overStep-through （安装部分以stepover为例） Key User manual Component descriptions 1 Headlight 5 Battery 9 Kickstand 2 Brake lever 6 Saddle 10 Pedal 3 Battery lock 7 Taillight 11 Brake Caliper 4 Charging port 8 Rear Hub Motor Display Throttle Bell Battery lock 1110 Buttons [On-Off] button [+] button [-] button 1. Power on/off 2. Function confirmation 1. Parameter adjustment 2. Turn on/off the light 3. Menu action 1. Parameter adjustment 2. Booster mode on/off 3. Menu action Press and hold the On/Off button to power on the bicycle. The logo wil…

Text truncated - open the document above for the full version.

Report No.: BL-EC2280839-AW 1 / 7 EUT EXTERNAL PHOTOS BQi FAT TIRE 300 STEP-THROUGH FRONT VIEW OF EUT LEFT SIDE VIEW OF EUT Report No.: BL-EC2280839-AW 2 / 7 RIGHT SIDE OF EUT TOP VIEW OF EUT Report No.: BL-EC2280839-AW 3 / 7 BOTTOM VIEW OF EUT BQi FAT TIRE 300 STEP-OVER FRONT VIEW OF EUT Report No.: BL-EC2280839-AW 4 / 7 LEFT SIDE VIEW OF EUT RIGHT SIDE OF EUT Report No.: BL-EC2280839-AW 5 / 7 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: BL-EC2280839-AW 6 / 7 Accessory-Adapter Close-up Photo Report No.: BL-EC2280839-AW 7 / 7 Accessory-Power Supply Cord

r MADE IN CHINA SN CAN ICES-3(B)/NMB-3(B) 90 35 R2.5 SN条码粘贴处 NIU E-BIKE Model: Input Voltage: 54.6 V Nominal Power: 750 W [0.75 kW] Net Weight: 78.4 lbs [35 kg] FCC ID : 2AZ6G-BQIFT300N IC : 27459-BQIFT300N Max SpeedThrottle Assist Speed : 20 mph [32 km/h] Pedal Assist Speed: 28 mph [45 km/h] Maximum Permissible Payload: 309 lbs [140 kg] Manufacturer: Jiangsu Niu Electric Technology Co., Ltd. Address: No.387 Changting Road, West Taihu Science and Technology Industrial Park, Changzhou City, Jiangsu, P.R. China

Report No.: BL-EC2280839-AI-2 1 / 4 EUT INTERNAL PHOTOS BQi FAT TIRE 300 STEP-OVER EUT UNCOVER VIEW EUT UNCOVER VIEW Report No.: BL-EC2280839-AI-2 2 / 4 MAIN BOARD TOP VIEW MAIN BOARD REAR VIEW PCB Antenna RF Chip Report No.: BL-EC2280839-AI-2 3 / 4 Battery Photo Close-up Report No.: BL-EC2280839-AI-2 4 / 4

Report No.: BL-EC2280839-AI-1 1 / 4 EUT INTERNAL PHOTOS BQi FAT TIRE 300 STEP-THROUGH EUT UNCOVER VIEW EUT UNCOVER VIEW Report No.: BL-EC2280839-AI-1 2 / 4 MAIN BOARD TOP VIEW MAIN BOARD REAR VIEW PCB Antenna RF Chip Report No.: BL-EC2280839-AI-1 3 / 4 Battery Photo Close-up Report No.: BL-EC2280839-AI-1 4 / 4

JiangsuNiuElectricTechnologyCo.,Ltd DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:BQiFATTIRE300STEP-THROUGH,BQiFATTIRE300STEP-OVER FCCID:2AZ6G-BQIFT300N fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsforinternalantennatype(s) describedbelow: ModelNo.ofantenna:SC-33R01B Typeofantenna:PCBAntenna Gainoftheantenna:-3.2dBi Frequencyrange:2400-2500MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:JiangsuNiuElectricTechnologyCo.,Ltd Address:No.387ChangtingRoad,WestTaihuScienceandTechnologyIndustrial Park, City:ChangzhouCity,Jiangsu, ZIP/Postalcode:Country:China Place:Guangzhou Date:2022-12-06 Signature

ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page1of10 TestingReport CustomerName:SHENZHENSCTECHTECHNOLOGYCO.,LTD ProductName:Bluetoothmodule SampleModel:SC-33R01B ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2022.8.26 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02022.8.26Forthefirsttime,formulateJacksonEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4DUTsetupphotooffreespaceOTAtesting........................................................................6 3.TestResults......................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1S11parameters...........................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13798473001 E-mail [email protected] Equipment Alltheequipmentusedinthereportisfixedin 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date 16probe microwave chamber 3*3*2.5 RFI-LAB-RF -A00 SUNYIELD2021.3.152023.3.14 Network Analyzer E5071C RFI-LAB-RF -A02 Agilent 2022.5.132023.5.12 Network Analyzer E5071C RFI-LAB-RF -C02 KEYSIGHT2022.5.132023.5.12 1.4Testenvironment Temperature 24.1°C Humidity 60%RH Pressure 100.12kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page5of10 2.SampleInformation 2.1Clientinformation Name SHENZHENSCTECHTECHNOLOGYCO.,LTD Address Building6,BaishishaNewDevelopmentZone,FuyongStreet, Bao'anDistrict,ShenzhenCity,GuangdongProvince Contacts ZhangLei Tel 13537703950 E-mail [email protected] Manufacturer SHENZHENSELETECHNOLOGYCO.,LTD 2.2DescriptionofEUT(S) ProductName Bluetoothmodule SampleModel SC-33R01B Size 15.1*11.2mm SerialNo. / TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 2400-2500MHz ReceivedDate 2022.8.25 TestDate 2022.8.25 Remark ThelengthoftheRFcableis20mm ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page6of10 2.3 EUTappearance 2.4DUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain ± 1dB Radiationefficiency±10% ReportNo.:RFI-LAB-RF-202208-HH21 QP030-E11 Page8of10 3.3 Testdata 3.3.1S11parameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 240024502500 VSWR 5.76013.51801.7365 Frequency/MHz 24002410242024302440245024602470248024902500 PeakGain/dBi…

Text truncated - open the document above for the full version.

Report No.: BL-EC2280839-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Jiangsu Niu Electric Technology Co., Ltd Address: No.387 Changting Road, West Taihu Science and Technology Industrial Park, Changzhou City, Jiangsu, 213100, China Equipment Type: NIU E-BIKE Model Name: BQi FAT TIRE 300 STEP-THROUGH (refer section 2.4) Brand Name: NIU FCC ID: 2AZ6G-BQIFT300N Test Standard: 47 CFR Part 2.1091 KDB 447498 D04 v01 Test Date： Sep. 02, 2022 – Nov. 02, 2022 Date of Issue: Nov. 29, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Yu Yingyuan Checked by: Xiong Lining Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-EC2280839-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Nov. 29, 2022 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 Factory Information ........................................................................................................ 4 2.4 General Description for Equipment under Test (EUT) ................................................... 4 2.5 Ancillary Equipment ........................................................................................................ 5 2.6 Technical Information ..................................................................................................... 5 3 SUMMARY OF TEST RESULT ................................................................................................... 6 3.1 Test Standards ............................................................................................................... 6 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 7 5 ASSESSMENT RESULT ............................................................................................................. 9 5.1 Output Power ................................................................................................................. 9 5.2 Tune-up power ............................................................................................................... 9 5.3 RF Exposure Evaluation Result ..................................................................................... 9 5.4 Conclusion ...................................................................................................................... 9 Report No.: BL-EC2280839-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-EC2280839-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Jiangsu Niu Electric Technology Co., Ltd Address No.387 Changting Road, West Taihu Science and Technology Industrial Park, Changzhou City, Jiangsu, 213100, China 2.2 Manufacturer Information Manufacturer Jiangsu Niu Electric Technology Co., Ltd Address No.387 Changting Road, West Taihu Science and Technology Industrial Park, Changzhou City, Jiangsu, 213100, China 2.3 Factory Information Factory JINHUA VISION INDUSTRY CO., LTD Address No.3777, King-Ding Road, low hill and gentle slope Comprehensive Zone, JiangDong Town, JinDong District, Jinhua, Zhejiang, China 2.4 General Description for Equipment under Test (EUT) EUT Name NIU E-BIKE Model Name Under Test BQi FAT TIRE 300 STEP-THROUGH Series Model Name BQi FAT TIRE 300 STEP-OVER Description of Model name differentiation The applied electric bicycle, model: BQi FAT TIRE 300 STEP-OVER, and model: BQi FAT TIRE 300 STEP-THROUGH, The differences are as follows, others all the same. BQi FAT TIRE 300 STEP…

Text truncated - open the document above for the full version.

Report No.: BL-EC2280839-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 55 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Jiangsu Niu Electric Technology Co., Ltd Address: No.387 Changting Road, West Taihu Science and Technology Industrial Park, Changzhou City, Jiangsu, 213100, China Equipment Type: NIU E-BIKE Model Name: BQi FAT TIRE 300 STEP-THROUGH (refer section 2.4) Brand Name: NIU FCC ID: 2AZ6G-BQIFT300N ISED Number: 27459-BQIFT300N Test Standard: 47 CFR Part 15 Subpart C RSS-Gen Issue 5 RSS-247 Issue 2 (refer section 3.1) Sample Arrival Date: Aug. 23, 2022 Test Date: Sep. 02, 2022 – Nov. 02, 2022 Date of Issue: Dec. 07, 2022 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Yu Yingyuan Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-EC2280839-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 55 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Nov. 29, 2022 Initial Issue Rev. 02 Dec. 07, 2022 Added Ancillary Equipment and Update section 4.5 TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Ancillary Equipment ........................................................................................................ 6 2.6 Technical Information ..................................................................................................... 7 3 SUMMARY OF TEST RESULTS ................................................................................................. 8 3.1 Test Standards ............................................................................................................... 8 3.2 Test Verdict .................................................................................................................... 8 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 9 4.1 Test Environments ......................................................................................................... 9 4.2 Test Equipment List ........................................................................................................ 9 4.3 Test Software List ........................................................................................................... 9 4.4 Measurement Uncertainty ............................................................................................ 10 4.5 Description of Test Setup ............................................................................................. 10 4.6 Measurement Results Explanation Example ................................................................ 13 5 TEST ITEMS .............................................................................................................................. 14 5.1 Antenna Requirements ................................................................................................. 14 5.2 Output Power ............................................................................................................... 15 Report No.: BL-EC2280839-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 55 Web: www.titcgroup.com Template No.: TRP-FCC&ISED 247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.3 Occupied Bandwidth .................................................................................................... 17 5.4 Conducted Spurious Emission ..................................................................................... 18 5.5 Band Edge (Authorized-band band-edge) .................................................................... 20 5.6 Conducted Emission .................................................................................................... 22 5.7 Radiated Spurious Emission ........................................................................................ 23 5.8 Band Edge (Restricted-band band-edge) ..................................................................... 28 5.9 Power Spectral density (PSD) ...................................................................................... 29 ANNEX A TEST RESULT ............................................................................................................. 30 A.1 Output Power, E.I.R.P, Duty Cycle ............................................................................... 30 A.2 Occupied Bandwidth .................................................................................................... 33 A.3 Conducted Spurious Emissions ...........…

Text truncated - open the document above for the full version.

Report No.: BL-EC2280839-AR 1 / 4 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz Close-up Report No.: BL-EC2280839-AR 2 / 4 30MHz-1GHz Above 1GHz Report No.: BL-EC2280839-AR 3 / 4 Close-up 2 Conducted Test Photo Conducted Test Report No.: BL-EC2280839-AR 4 / 4 3 Conducted Emissions Test Photo 1 Test Photo 2