2AZCN-8001R/C CAR

User Manual Model:8001 The raw product is 2.4 G. Four-channel remote control car. The transmitter adopts. Powered by two 1.5V dry batteries. Receiving, powered by 3.7V lithium batteries. , -First install the battery as required. , -Turn on the remote control power switch.The indicator light keeps flashing at this time. -Quickly enter the search for the screen status, And then turn on the power switch of the remote control car. , But the remote control indicator is off. The secret indicates that the pairing is successful. -Press forward on the remote control. Back, turn left and turn right button., Security check, and the car respectively perform corresponding actions. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept an y interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B dig ital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc tions, may cause harmful interference to radio communications. However, there is no guarantee th at interference will not occur in a particular installation. If this equipment does cause harmful inter ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measu res: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐ Consult the dealer or an experienced radio/TV technician for help important announcement Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

QUANSHENG TOYS FACTORY WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Date: 2021-03-17 Dear Sir/Madam, We, QUANSHENG TOYS FACTORY Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: R/C CAR Model No 8001, 8002, 8003, 8004,8005, 8006, 8007, 8008, 8009, 80010,80011, 80012, 80013, 80014, 80015, 80016, 80017, 80018, 80019, 80020 FCC ID 2AZCN-8001 Sincerely, Name/Title： Xuan Guo/Manager Company: QUANSHENG TOYS FACTORY Address: WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Phone: 13510276457 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2021/03/17 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: Model No 8001, 8002, 8003, 8004,8005, 8006, 8007, 8008, 8009, 80010,80011, 80012, 80013, 80014, 80015, 80016, 80017, 80018, 80019, 80020 FCC ID 2AZCN-8001 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Xuan Guo/Manager Company: QUANSHENG TOYS FACTORY Address: WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Phone: 13510276457 E-Mail: [email protected]

QUANSHENG TOYS FACTORY WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 03/17/2021 To whom it may concern: We, QUANSHENG TOYS FACTORY the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AZCN-8001 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Xuan Guo/Manager Company: QUANSHENG TOYS FACTORY Address: WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Phone: 13510276457 E-Mail: [email protected]

FCC ID: 2AZCN-8001 FCC ID: 2AZCN-8001 FCC ID: 2AZCN-8001

FCC ID: 2AZCN-8001 FCC ID : 2AZCN-8001

FCC ID: 2AZCN-8001 FCC ID: 2AZCN-8001 ANT

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong TEST REPORT FCC Rules and Regulations Part PART 15.249 Report Reference No ......................: GTS20210315018-1-1 FCC ID ........................................... .:: 2AZCN-8001 Compiled by ( position+printed name+signature) .. : File administrators Jimmy Wang Supervised by ( position+printed name+signature) .. : Test Engineer Aaron Tan Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Mar. 15, 2020 Testing Laboratory Name .............. : Shenzhen Global Test Service Co., Ltd. Address .................................................. : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong, China Applicant’s name ............................ : QUANSHENG TOYS FACTORY Address ............................................ : WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Standard ........................................... : FCC Rules and Regulations Part PART 15.249 Shenzhen Global Test Service Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: R/C CAR Trade Mark ....................................... : N/A Manufacturer ................................... : QUANSHENG TOYS FACTORY Model/Type reference....................... : 8001 Listed Models .................................. : 8002, 8003, 8004,8005, 8006, 8007, 8008, 8009, 80010,80011, 80012, 80013, 80014, 80015, 80016, 80017, 80018, 80019, 80020 Modulation ....................................... : GFSK Frequency .......................................... 2465.5MHz Ratings ............................................. : DC 3.0 V From Battery Result................................................ : PASS Report No.: GTS20210315018-1-1 Page 2 of 20 T E S T R E P O R T Test Report No. : GTS20210315018-1-1 Mar. 15, 2021 ______________________________________________________________________________________________ Date of issue Equipment under Test : R/C CAR Model /Type : 8001 Listed Models : 8002, 8003, 8004,8005, 8006, 8007, 8008, 8009, 80010,80011, 80012, 80013, 80014, 80015, 80016, 80017, 80018, 80019, 80020 Applicant : QUANSHENG TOYS FACTORY Address : WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Manufacturer : QUANSHENG TOYS FACTORY Address : WAIBU INDUSTRIAL AREA,CHENGHAI SHANTOU CHINA Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20210315018-1-1 Page 3 of 20 Contents 1. 0BT E S T S T A N D A R D S................................................................. 4 2. 1BS U M M A R Y ............................................................................ 5 2.1. General Remarks 5 2.2. 7BProduct Description 5 2.3. 8BEquipment Under Test 5 2.4. 9BShort description of the Equipment under Test (EUT) 5 2.5. 10BEUT operation mode 5 2.6. 11BBlock Diagram of Test Setup 6 2.7. Modifications 6 3. 2BT E S T E N V I R O N M E N T ............................................................. 7 3.1. TEST FACILITY 7 3.2. 17BEnvironmental conditions 7 3.3. 18BSummary of measurement results 7 3.4. Statement of the measurement uncertainty 7 3.5. 20BEquipments Used during the Test 8 4. 3BT E S T C O N D I T I O N S A N D R E S U L T S ............................................ 9 4.1. 21BAC Power Conducted Emission ..................................................................................... 9 4.2. Radiated Emission and Band Edges ............................................................................ 10 4.3. 20dB Bandwidth Measurement .................................................................................... 14 4.4. 31BAntenna Requirement ................................................................................................... 15 5. 4BT E S T S E T U P P H O T O S O F T H E E U T ........................................ 16 6. 4BT E S T P H O T O S O F T H E E U T .................................................. 17 Report No.: GTS20210315018-1-1 Page 4 of 20 1. 0BT E S T S T A N D A R DS The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. ANSI C63.10:2013 : American National Standard for Testing Unlicensed Wireless Devices ANSI C63.4: 2014: –American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40GHz Range of 9 kHz to 40GHz Report No.: GTS20210315018-1-1 Page 5 of 20 2. 1BS U M M A R Y 2.1. General Remarks Date of receipt of test sample : Mar. 01, 2021 Testing commenced on : Mar. 01, 2021 Testing concluded on : Mar. 15, 2021 2.2. 7BProduct Description Name of EUT R/C CAR Model Number 8001 List Model: 8002, 8003, 8004,8005, 8006, 8007, 8008, 8009, 80010,80011, 80012, 80013, 80014, 80015, 80016, 80017, 80018, 80019, 80020 Power Rating DC 3.0V From Battery Sample ID: GTS20210315018-1-1 -1#(Engineer sample) GTS20210315018-1-1 -2#(Normal sample) Operation frequency 2465.5MHz Modulation GFSK Antenna Type PCB antenna Antenna Gain 0dB(Max) 2.3. 8BEquipment Under Test Power supply system utilised Power supply vol…

Text truncated - open the document above for the full version.

FCC ID: 2AZCN-8001 _______________________________________________________________________________________________ 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2