2AZJG-P6555Electric Skateboard Controller

User Manual of Remote for Skateboard HW6123ENG-20170822 Thank you for purchasing this HOBBYWING product! Any improper operation may cause the unit to function abnormally or even damage relevant devices, so we strongly recommend reading through this user manual before use. Because we have no control over the use, installation, or maintenance of this product, no liability may be assumed for any damage or losses resulting from the use of the product. We do not assume responsibility for any losses caused by unauthorized modifications to our product. Besides, we have the right to modify our product design, appearance, features and usage requirements without notification. We, HOBBYWING, are only responsible for our product cost and nothing else as result of using our product. 01 Specifications 02 Image 03 Functions & Instructions 1) Power On (With the remote powered off), press the “Button A” (on the remote) for 1 second, the remote vibrates a short vibration, enters the connecting mode, and the signal LED starts to flash Red slowly (once a second). (With the board powered off), press the “Power” button on the board (for 0.2 second) to enter the “connecting” mode, and the Red LED on it starts to flash slowly (once a second). Note: the signal LED on the remote and the Red LED on the board turn solid after they are connected to each other. 2) Power Off (Power off) manually: (with the remote & the board powered on), pressing the “Button A” on the remote for 2 seconds can turn off the remote, the remote will vibrate a short vibration after the press; pressing the “Power” button on the board for 1 second can turn off the board. Note: if the remote is still on after the board is turned off, the signal LED on the remote will flash Red slowly and vibrate once to remind the user. Similarly, if the board is still on after the remote is powered off, the Red LED on the board will flash slowly (to warn the user.) (Power off) Automatically: if the user let the board stay still with no further operation for 5 minutes, then the remote and the board will turn off automatically. 3) Connecting & Binding (Remote & Board are bound before leaving the factory) (With the remote & the board powered off,) press the “Power” button on the board for 5 seconds, the Red LED (on it) starts to flash rapidly to indicate that the board enters the binding mode; then press the “Button A” on the remote for 5 seconds, the Signal LED (on it) starts to flash Red rapidly to indicate that the remote enters the binding mode, and the remote vibrates two short vibrations and one long vibration to indicate that the binding succeeds. The signal LED on the remote and the Red LED on the board turn solid when the binding succeeds. Note: when using a new remote and a new board, there is no need to press either the Power button (on the board) or the Button A (on the remote) for 5 seconds to bind them. They enters into the binding mode when they are powered on. 4) Power Indicators Remote Power Indicator (a single LED): after the remote is powered on, if it detects the power is less than 25% (which can barely support an one-hour operation), the Remote Power LED comes on Red; if the power is sufficient (that is the power can support an operation of at least one hour), then the Remote Power LED comes on Green. If there is only 5% of power (which can only support a 15-minute operation) left, the remote will vibrate a double, long vibration (vibrate for 0.5 second, pause for 0.5 second and then vibrate again for 0.5 second ) and the Remote Power LED starts to flash Red slowly (once a second); if there is only 2.5% of power left, the remote will vibrate a double, long vibration again (the same as the previous) and the Remote Power LED starts to flash Red slowly; and if the power is below the regulated value (3.4V) for safe use and the board stops, the remote will vibrate a short vibration and then turn off automatically. Board Power Indicator (4 LEDs in a row): one LED comes on to indicate there is still 25% of power, one LED flashes to indicate there is only 12.5% of power left. For example, if the power ranges from 62.5% to 75%, then the four LEDs will display in this way “○●●●”; if the power ranges from 50%~62.5%, then the four LEDs will display in this way “○☉●●”; if the power is below 25%, the remote will vibrate a double, long vibration and the four LEDs will display in this way “○○○●” ; if the power is below 12.5%, the remote will vibrate a double, long vibration and the four LEDs will display in this way “○○○☉”; and if the voltage goes below the regulated value for safe use, then the power output will be cut off. At this time, it’s better to stop using as soon as possible. Notes: the remote will display the power of the remote & the board for 2 seconds and then stop when it’s powered on and connected to the board. Press the Button A at any time can re-trigger the display of the power of the remote & the board. the remote only displays the power of the remote when the board is not connected (to the remote). Attention! “●” means “solid”, “☉” means “flash” and “○” means “die out”. 5) Throttle/Brake Control User can move the “throttle scroll wheel” forward to speed up, and move it backward to brake. Notes: Do not move the “throttle scroll wheel” when pressing the Button A (/Power Switch). If you see the four LEDs (on the remote) flash in the following way: “●○○●”, “○●●○”, “●○○●”, “○●●○”..., then please check if the “throttle scroll wheel” is at the neutral/zero throttle position. 6) Switch of Skateboard Direction When the board is moving forward, if the user moves the Switch C backward, the remote will vibrate a single, short vibration (0.1 second), the four LEDs will flash one by one from front to back to indicate the “Backward mode”. When the board is moving backward, if the user moves the Switch C forward, the remote will vibrate a single, short vibration, the four LEDs will flash one by one from back to front to indicate the “Forward mode”. Not…

Text truncated - open the document above for the full version.

Shenzhenpowerfulintelligenceco.,LTD ModelConfirmationLetter We,(Shenzhenpowerfulintelligenceco.,LTD)certifytheproduct:ElectricSkateboard Controller,ModelNo.:P6555,P5045,P5052,P6566 Therearemanymodelshere,butonlytested:P6555,Theirelectricalcircuitdesign,layout, componentsusedandinternalwiringwereidenticalfortheabovemodels,withdifference beingcolorofappearanceandmodelname. Name:Wenwuzhang Date:2021-5-27

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page1of1 Shenzhenpowerfulintelligenceco.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2021-5-27 SUBJECT:FCCApplicationfor(FCCID:2AZJG-P6555) ToWhomItMayConcern: We,theundersigned,herebyauthorizeJudyChenin ShenzhenHuaxiaTesting TechnologyCo.,Ltdat1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad, DalangStreet,LonghuaDistrict,Shenzhen,Chinaonourbehalf,toapplytotheFederal CommunicationsCommissiononourequipment.Anyandallactscarriedoutby ShenzhenHuaxiaTestingTechnologyCo.,Ltd onourbehalfshallhavethesame effectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We, theapplicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection 5301oftheAnti-DrugActof1988,21USC853a,andnopartytotheapplicationis subjecttoadenialoffederalbenefitspursuanttothatsection. Sincerely, (MustbesignedbythepersonthatislistedontheFCCWebsite) Signature: Contactname:Wenwuzhang Companyname:Shenzhenpowerfulintelligenceco.,LTD Address:Room3616H9,BuildingA,XingheCentury,No.3069,CaitianRoad,Gangxia Community,FutianStreet,FutianDistrict,Shenzhen

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCConfidentialityv02Page1of1 Shenzhenpowerfulintelligenceco.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2AZJG-P6555 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequest confidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName 1.BlockDiagram, 2.Schematics, 3.OperationalDescription 1.2AZJG-P6555-Blockdiagram 2.2AZJG-P6555-SCH 3.2AZJG-P6555-Operationaldescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateofthe Grantforthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealso requesttemporaryconfidentialtreatmentofinformationaccompanyingthisapplication asoutlinedbelowforaninitialperiodofxxxx(ie-“45”,“90”or“180”)days: ExhibitTypeFileName N/AN/A Signature: Contactname:Wenwuzhang Companyname:Shenzhenpowerfulintelligenceco.,LTD Address:Room3616H9,BuildingA,XingheCentury,No.3069,CaitianRoad,Gangxia Community,FutianStreet,FutianDistrict,Shenzhen

FCCID:2AZJG-P6555 FCCID:2AZJG-P6555 FCCID:2AZJG-P6555 FCCID:2AZJG-P6555

Labellocation Labelsize：13mm*65mm Sample： ElectricSkateboardControllerMODEL:P6555FCCID:2AZJG-P6555 Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference, and(2)thisdevicemustacceptanyinterferencereceived,includinginterference thatmaycauseundesiredoperation.

FCCID:2AZJG-P6555 FCCID:2AZJG-P6555 FCCID:2AZJG-P6555

ShenzhenHuaxiaTestingTechnologyCo.,Ltd 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V04 ReportTemplateRevisionDate:2018-07-06 RFExposureEvaluationReport ReportNo.: CQASZ20210400021EX-02 Applicant: Shenzhenpowerfulintelligenceco.,LTD AddressofApplicant: Room3616H9,BuildingA,XingheCentury,No.3069,CaitianRoad,Gangxia Community,FutianStreet,FutianDistrict,Shenzhen Manufacturer: Shenzhenpowerfulintelligenceco.,LTD Addressof Manufacturer: Room3616H9,BuildingA,XingheCentury,No.3069,CaitianRoad,Gangxia Community,FutianStreet,FutianDistrict,Shenzhen EquipmentUnderTest(EUT): Product:ElectricSkateboardController AllModel:P6555,P5045,P5052,P6566 TestModelNo.:P6555 BrandName: Powerfvl FCCID: 2AZJG-P6555 Standards: 47CFRPart1.1307 47CFRPart1.1310 KDB447498D01GeneralRFExposureGuidancev06 DateofTest:2021-03-25to2021-04-13 DateofIssue:2021-04-13 TestResult:PASS TestedBy： (LewisZhou) ReviewedBy: (TimoLei) ApprovedBy: (SheekLuo) ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210400021EX-02 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20210400021EX-02Rev.01 Initialreport 2021-04-13 ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210400021EX-02 2Contents 1VERSION.............................................................................................................................................................................2 2CONTENTS.........................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION....................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT....................................................................................................................................4 3.3GENERALDESCRIPTIONOF2.4G....................................................................................................................................4 4RFEXPOSUREEVALUATION.......................................................................................................................................5 4.1RFEXPOSURECOMPLIANCEREQUIREMENT..................................................................................................................5 4.1.1StandardRequirement......................................................................................................................................5 4.1.2Limits....................................................................................................................................................................5 4.1.3EUTRFExposureEvaluation..........................................................................................................................6 ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210400021EX-02 3GeneralInformation 3.1ClientInformation Applicant: Shenzhenpowerfulintelligenceco.,LTD AddressofApplicant: Room3616H9,BuildingA,XingheCentury,No.3069,CaitianRoad, GangxiaCommunity,FutianStreet,FutianDistrict,Shenzhen Manufacturer: Shenzhenpowerfulintelligenceco.,LTD AddressofManufacturer: Room3616H9,BuildingA,XingheCentury,No.3069,CaitianRoad, GangxiaCommunity,FutianStreet,FutianDistrict,Shenzhen 3.2GeneralDescriptionofEUT ProductName: ElectricSkateboardController TestModelNo.: P6555 TradeMark: Powerfvl HardwareVersion: V1.0 SoftwareVersion: V1.6 ProductType:MobilePortableFixLocation EUTPowerSupply: battery:3.0V(2*1.5V) 3.3GeneralDescriptionof2.4G OperationFrequency:2402-2480MHz ModulationType:GFSK TransferRate:2Mbps NumberofChannel:16 FixedfrequencymodeCombinebuttonstoenterengineeringmode ProductType:MobilePortableFixLocation AntennaType: FPCAntenna AntennaGain: 0dBi ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210400021EX-02 4RFExposureEvaluation 4.1RFExposureComplianceRequirement 4.1.1StandardRequirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06 4.3.1.StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-ghead orbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions,by measurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARExclusion Thresholdcondition,listedbelow,issatisfied. 4.1.2Limits The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparationdistances ≤50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]· [√f(GHz)]≤3.0for1-gSARand≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation17 Theresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mmand fortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparation distanceis<5mm,adistanceof5mmisappliedtodetermineSARtestexclusion ShenzhenHuaxiaTestingTechnologyCo.,Ltd ReportNo.:CQASZ20210400021EX-02 4.1.3EUTRFExposureEvaluation 1)For2.4G AntennaGain:0dB MeasurementData GFSKmode TestChannel PeakOutputPower (dBm) Tuneuptolerance (dBm) Maximumtune-upPower (dBm)(mW) Lowest(2402MHz)1.9692±131.995 Middle(2440MHz)1.7512±131.995 Highest(2480MHz)1.5082±131.995 Worstcase: Channel MaximumPeak Conducted OutputPower (dBm) Tuneup tolerance (dBm) Maximumtuneup PowerCalculated value Exclusion threshold (dBm)(mW) Lowest (2402MHz) 1.9692±131.9950.618 3.0 Middle (2440MHz) 1.7512±131.9950.623 Highest (2480MHz) 1.5082±131.9950.628 Conclusion:thecalculatedvalue≤3.0,SARisexempted. Remark:TheMaxConductedPeakOutputPowerdatarefertoreportReportNo.:CQASZ20210400…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building,Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com Report Template Version: V03 Report Template Revision Date: Mar.1st, 2017 Test Report * In the configuration tested, the EUT complied with the standards specified above. The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. : CQASZ20210400021EX-01 Applicant: Shenzhen powerful intelligence co., LTD Address of Applicant:Room 3616H9, Building A, Xinghe Century, No. 3069, Caitian Road, Gangxia Community, Futian Street, Futian District, Shenzhen Manufacturer: Shenzhen powerful intelligence co., LTD Address of Manufacturer: Room 3616H9, Building A, Xinghe Century, No. 3069, Caitian Road, Gangxia Community, Futian Street, Futian District, Shenzhen Equipment Under Test (EUT): Product:Electric Skateboard Controller All Model:P6555, P5045, P5052, P6566 Test Model No.:P6555 Brand Name: Powerfvl FCC ID: 2AZJG-P6555 Standards:47 CFR Part 15, Subpart C Section 15.247 Date of Test:2021-03-25 to 2021-04-13 Date of Issue:2021-04-13 Test Result :PASS* Tested By： ( Lewis Zhou ) Reviewed By: (TimoLei) Approved By: ( Sheek Luo) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20210400021EX-01 Page: 2 of 42 1Version Revision History Of Report ReportNo.Version Description Issue Date CQASZ20210400021EX-01Rev.01 Initial report 2021-04-13 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20210400021EX-01 Page: 3 of 42 2 Test Summary Test ItemTest RequirementTest methodResult Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2013PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 2013PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(3) ANSI C63.10 2013PASS 6dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(2) ANSI C63.10 2013PASS Power Spectral Density 47 CFR Part 15, Subpart C Section 15.247 (e) ANSI C63.10 2013PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013PASS Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013PASS Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20210400021EX-01 Page: 4 of 42 3 Contents Page 1 VERSION.......................................................................................................................................................................... 2 2 TEST SUMMARY............................................................................................................................................................ 3 3CONTENTS...................................................................................................................................................................... 4 4 GENERAL INFORMATION........................................................................................................................................... 5 4.1 C LIENTINFORMATION................................................................................................................................................. 5 4.2 G ENERALDESCRIPTION OFEUT................................................................................................................................. 5 4.3 T ESTENVIRONMENT....................................................................................................................................................7 4.4 D ESCRIPTION OFSUPPORTUNITS................................................................................................................................7 4.5 S TATEMENT OF THE MEASUREMENT UNCERTAINTY....................................................................................................8 4.6 T ESTLOCATION...........................................................................................................................................................9 4.7 T ESTFACILITY.............................................................................................................................................................9 4.8 D EVIATION FROMSTANDARDS....................................................................................................................................9 4.9 O THERINFORMATIONREQUESTED BY THECUSTOMER.............................................................................................. 9 4.10 E QUIPMENTLIST......................................................................................................................................................10 5 TEST RESULTS AND MEASUREMENT DATA......................................................................................................11 5.1 A NTENNAREQUIREMENT.......................................................................................................................................... 11 5.2 C ONDUCTEDEMISSIONS............................................................................................................................................ 12 5.3 C ONDUCTEDPEAKOUTPUTPOWER..........................................................................................................................15 5.4 6 DBOCCUPYBANDWIDTH........................................................................................................................................ 17 5.5 P OWERSPECTRALDENSITY...........................................…

Text truncated - open the document above for the full version.

FCCID:2AZJG-P6555 1Photographs-EUTTestSetup RadiatedEmission 9kHz~30MHz: 30MHz~1GHz: FCCID:2AZJG-P6555 Above1GHz: ConductedEmission