2AZK8-AW018PPower Bank

FCC statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 0 cm surrounding the device and 0 cm above the top surface of thedevicemust be respected.

- YuweiTechnology(Dongguan)Co., Ltd. - FederalCommunicationsCommission Authorizationand EvaluationDivision EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MD 21046 9/14/23 U.S. AgentDesignation Yuwei Technology(Dongguan)Co., Ltd.acknowledgestheir consentfor the followingcontactlocatedin the UnitedStatesto act as their agent for serviceof processfor the equipmentfor which authorizationis sought(FCC ID:2AZK8-AW018P): Nameand companyof U.S. agent: Tim Payne,FCC US Agent,LLC PhysicalU.S. addressof agent:3722 IllinoisAvenue,Saint Charles,IL, 60174,USA FRN of U.S. agent: 0033402884 Email addressof U.S. agent: [email protected] FCC US Agent,LLCacknowledgestheir obligationto acceptserviceof processon behalfofYuwei Technology(Dongguan)Co., Ltd. Yuwei Technology(Dongguan)Co., Ltd.with theFRN 0030799027acceptsits obligationto maintainan agent for serviceof processin the UnitedStatesfor no less than one year after eitherthe granteehas permanently terminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. By signingthis form, we confirmthe aboveand that we are awareof the applicationrequirementslisted under§ 2.911(d)(7). The informationprovidedin this letter is basedon the referencedrule parts of Title 47 of the CFR as well as KDB 986446D01. An expirationdate for this letter does not exist. In case the U.S. agent changes,the granteeis obligatedto notify the FCC within 30 days via the grantingTCB. Sincerely, Signature WenchengLiu Manager YuweiTechnology(Dongguan)Co., Ltd. Signature Tim Payne Manager FCC US Agent,LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Sincerely, Name/Title： Wencheng Liu/Manager Company: Yuwei Technology (Dongguan) Co., Ltd. Address: Room 302, Building 1, No. 3, Buxinji Industrial Road, Fenggang, Dongguan, Guangdong, China Phone: 0769-87552325 Fax: 0769-87552325 E-Mail: [email protected]

Page1of4FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. EUTConstructionalDetails ExternalEUTPhoto Photo1 Photo2 Page2of4FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo3 Photo4 Page3of4FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo5 Photo6 Page4of4FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo7 Photo8 ---TheEnd---

Label FCCID:2AZK8-AW018P

Page1of6FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. EUTConstructionalDetails InternalEUTPhoto Photo1 Photo2 Page2of6FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo3 Photo4 Page3of6FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo5 Photo6 Antenna Page4of6FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo7 Photo8

Page5of6FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo9 Photo10 Page6of6FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo11 Photo12 ------End------

Page 1 of 13ReportNo.:AIT23091116FW2 FCCTESTREPORT ClientInformation: Applicant:YuweiTechnology(Dongguan)Co.,Ltd Applicantadd.: Room302,Building1,No.3,BuxinjiIndustrialRoad,Fenggang,Dongguan, Guangdong,China Manufacturer:YuweiTechnology(Dongguan)Co.,Ltd Manufactureradd.: Room302,Building1,No.3,BuxinjiIndustrialRoad,Fenggang,Dongguan, Guangdong,China ProductInformation: ProductName:PowerBank ModelNo.:AW018P BrandName:N/A FCCID:2AZK8-AW018P Applicablestandards : FCCRulesandRegulationspart2.1091 KDB680106D01v03 PreparedBy: DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang,Huangjiang,Dongguan, Guangdong,China Tel.:+86-769-82020499Fax.:+86-769-82020495 DateofReceipt:Sep.11,2023DateofTest:Sep.11,2023~Sep.12,2023 DateofIssue:Sep.13,2023TestResult:Pass ThisdevicedescribedabovehasbeentestedbyDongguanYaxu(AiT)TechnologyLimitedandthe testresultsshowthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements. Anditisapplicableonlytothetestedsampleidentifiedinthereport. Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofDongguan Yaxu(AiT)TechnologyLimited,thisdocumentmaybealteredorrevisedbyDongguanYaxu(AiT) TechnologyLimited,personalonly,andshallbenotedintherevisionofthedocument.Thistest reportmustnotbeusedbytheclienttoclaimproductendorsement. Reviewedby:Approvedby: SimbaHuangSeal.chen Page 2 of 13ReportNo.:AIT23091116FW2 Contents 1TESTFACILITY..........................................................................................................................3 1.1Deviationfromstandard3 1.2Abnormalitiesfromstandardconditions3 1.3TestLocation3 1.4Environmentalconditions3 2GENERALINFORMATION....................................................................................................4 2.1ProductDescription4 2.2Descriptionofthetestmode5 2.3SpecialAccessories5 2.4Summaryofmeasurementresults6 2.5Statementofthemeasurementuncertainty6 2.6EquipmentsUsedduringtheTest6 3TESTCONDITIONSANDRESULTS..............................................................................7 3.1ApplicableStandard7 3.2Limit7 3.3TestSetup8 3.4MeasurementProcedure8 3.5TestResultofEandHfieldStrength8 3.6Conclusion10 4TESTSETUPPHOTOSOFTHEEUT..........................................................................11 Page 3 of 13ReportNo.:AIT23091116FW2 1TestFacility Thetestfacilityisrecognized,certifiedoraccreditedbythefollowingorganizations: .CNAS-RegistrationNo:L6177 DongguanYaxu(AiT)technologyLimitedisaccreditedtoISO/IEC17025:2017generalRequirementsforthe competenceoftestingandcalibrationlaboratories(CNAS-CL01AccreditationCriteriaforthecompetence oftestingandcalibrationlaboratories)onApril18,2022 FCC-RegistrationNo.:703111DesignationNumber:CN1313 DongguanYaxu(AiT)technologyLimitedhasbeenregisteredandfullydescribedinareportfiledwiththe (FCC)FederalCommunicationsCommission.TheacceptanceletterfromtheFCCismaintainedinour files. IC—RegistrationNo.:6819ACABidentifier:CN0122 The3mSemi-anechoicchamberofDongguanYaxu(AiT)technologyLimitedhasbeenregisteredby CertificationandEngineeringBureauofIndustryCanadaforradioequipmenttestingwithRegistration No.:6819A A2LA-LabCert.No.:6317.01 DongguanYaxu(AiT)technologyLimitedhasbeenaccreditedbyA2LAfortechnicalcompetenceinthe fieldofelectricaltesting,andprovedtobeincompliancewithISO/IEC17025:2017General RequirementsfortheCompetenceofTestingandCalibrationLaboratoriesandanyadditionalprogram requirementsintheidentifiedfieldoftesting. 1.1Deviationfromstandard None 1.2Abnormalitiesfromstandardconditions None 1.3TestLocation DongguanYaxu(AiT)TechnologyLimited Address:No.22,Jinqianling3rdStreet,Jitigang,Huangjiang,Dongguan,Guangdong,China Tel.:+86-769-82020499 Fax.:+86-769-82020495 1.4Environmentalconditions Duringthemeasurementtheenvironmentalconditionswerewithinthelistedranges: Temperature:15-35°C Humidity:30-60% Atmosphericpressure:950-1050mbar Page 4 of 13ReportNo.:AIT23091116FW2 2GeneralInformation 2.1ProductDescription EUTName: PowerBank ModelNo: AW018P SerialModel:N/A Testsample(s)ID: 23091116 Sample(s)Status:Engineersample SerialNo.: N/A Operationfrequency:300kHz-350kHz ModulationTechnology: ASK AntennaType:loopcoilAntenna Antennagain: 0dBi Hardwareversion.:N/A Softwareversion.: N/A Powersupply: BatteryCapacity:3.85V10000mAh/38.5Wh InputIN1:5V3A,9V2A InputIN2:5V2A,9V2A Output1:5V3A,9V2.22A,12V1.67A Output2:5V3A,9V2A,12V1.5A,5V4.5A,4.5V5A LightningCable:5V2.4A AppleWatchWirelessCharging:2.5W Note: Foramoredetailedfeaturesdescription,pleaserefertothemanufacturer’s specificationsortheUser'sManual. Page 5 of 13ReportNo.:AIT23091116FW2 2.2Descriptionofthetestmode Equipmentundertestwasoperatedduringthemeasurementunderthefollowingconditions: Chargingandcommunicationmode TestModeDescription Mode1 Wirelesscharging+Load Record Mode2TesttheEUTinidlemode. Pre-tested Note:Alltestmodeswerepre-tested,butweonlyrecordedtheworstcaseinthisreport. 2.3SpecialAccessories Followauxiliaryequipment(s)testwithEUTthatprovidedbythemanufacturerorlaboratoryislistedasfollow: DescriptionManufacturerModelTechnicalParametersCertificateProvidedby WatchAppleS6/FCClaboratory Page 6 of 13ReportNo.:AIT23091116FW2 2.4Summaryofmeasurementresults TestItemResult MagneticFieldStrength(H)(A/m)Compliant 2.5Statementofthemeasurementuncertainty Thedataandresultsreferencedinthisdocumentaretrueandaccurate.Thereaderiscautionedthatthere maybeerrorswithinthecalibrationlimitsoftheequipmentandfacilities.Themeasurementuncertaintywas calculatedforallmeasurementslistedinthistestreportacc.toCISPR16-4„Specificationforradio disturbanceandimmunitymeasuringapparatusandmethods–Part4:UncertaintyinEMC Measurements“andisdocumentedintheShenzhenGlobalTestServiceCo.,Ltdqualitysystemacc.toDIN ENISO/IEC17025.Furthermore,componentandprocessvariabilityofdevicessimilartothattestedmay resultinadditionaldeviation.Themanufacturerhasthesoleresponsibilityofcontinuedcomplianceofthe device. TestItemFrequencyRangeMeasurementUncertaintyNotes RadiatedEmission0.009MHz-30MHz3.10dB(1) RadiatedEmission30MHz-1GHz3.75dB(1) Radiated…

Text truncated - open the document above for the full version.

Page1of23ReportNo.:AIT23091116FW1 DongguanYaxu(AiT)TechnologyLimited No.22,JinqianlingThirdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. FCCTESTREPORT ClientInformation: Applicant:YuweiTechnology(Dongguan)Co.,Ltd Applicantadd.: Room302,Building1,No.3,BuxinjiIndustrialRoad,Fenggang,Dongguan, Guangdong,China Manufacturer:YuweiTechnology(Dongguan)Co.,Ltd Manufactureradd.: Room302,Building1,No.3,BuxinjiIndustrialRoad,Fenggang,Dongguan, Guangdong,China ProductInformation: ProductName:PowerBank ModelNo.:AW018P BrandName:N/A FCCID:2AZK8-AW018P Applicablestandards:FCCCFRTitle47Part15SubpartC PreparedBy: DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang,Huangjiang,Dongguan, Guangdong,China Tel.:+86-769-82020499Fax.:+86-769-82020495 DateofReceipt:Sep.11,2023DateofTest:Sep.11,2023~Sep.12,2023 DateofIssue:Sep.13,2023TestResult:Pass ThisdevicedescribedabovehasbeentestedbyDongguanYaxu(AiT)TechnologyLimitedandthe testresultsshowthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements. Anditisapplicableonlytothetestedsampleidentifiedinthereport. Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofDongguan Yaxu(AiT)TechnologyLimited,thisdocumentmaybealteredorrevisedbyDongguanYaxu(AiT) TechnologyLimited,personalonly,andshallbenotedintherevisionofthedocument.Thistest reportmustnotbeusedbytheclienttoclaimproductendorsement. Reviewedby:Approvedby: SimbaHuangSeal.chen Page2of23ReportNo.:AIT23091116FW1 DongguanYaxu(AiT)TechnologyLimited No.22,JinqianlingThirdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. 1Contents Page COVERPAGE 1CONTENTS............................................................................................................................................................2 2TESTSUMMARY...................................................................................................................................................5 2.1STATEMENTOFTHEMEASUREMENTUNCERTAINTY.............................................................................................5 2.2MEASUREMENTUNCERTAINTY............................................................................................................................5 3TESTFACILITY.....................................................................................................................................................6 3.1DEVIATIONFROMSTANDARD..............................................................................................................................6 3.2ABNORMALITIESFROMSTANDARDCONDITIONS...................................................................................................6 3.3TESTLOCATION.................................................................................................................................................6 4GENERALINFORMATION...................................................................................................................................7 4.1EUTTESTMODE...............................................................................................................................................8 4.2DESCRIPTIONOFTESTSETUP............................................................................................................................8 4.3PERIPHERALLIST...............................................................................................................................................9 4.4EUTPERIPHERALLIST......................................................................................................................................9 5EQUIPMENTSLISTFORALLTESTITEMS......................................................................................................10 6CONDUCTEDEMISSIONTEST.........................................................................................................................11 6.1CONDUCTEDEMISSIONMEASUREMENT................................................................................................11 6.2POWERLINECONDUCTEDEMISSIONLIMITS..........................................................................................11 6.3TESTPROCEDURE......................................................................................................................................11 6.4DEVIATIONFROMTESTSTANDARD........................................................................................................11 6.5TESTSETUP.................................................................................................................................................12 6.6EUTOPERATINGCONDITIONS..................................................................................................................12 6.7TESTRESULT..................................................................................................................................................13 7RADIATEDEMISSIONMEASUREMENT...........................................................................................................15 7.1RADIATEDEMISSIONLIMITS.............................................................................................................................15 7.2ANECHOICCHAMBERTESTSETUPDIAGRAM....................................................................................................16 7.3TESTPROCEDURE...........................................................................................................................................16 7.4DEVIATIONFROMTESTSTANDARD........................................................................................................16 7.5TESTRESULT..................................................................................................................................................17 8BANDWIDTHTEST.............................................................................................................................................20 8.1TESTPROCEDURE.........................................…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type: loop coil Antenna Manufacturer: GN Audio A/S Model: WH-WI-AW018P Antenna Gain(Peak): 0 dBi Frequency range:300kHz-350kHz 2. Antenna Photo: 35mm 35mm

Page1of2FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. TestSetupPhoto RadiatedEmission Page2of2FCCID: 2AZK8-AW018P DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. ConductedEmission ------End------