2AZLYWBK-5846BT-12DLED Makeup Mirror with Bluetooth Speaker

USER MANUAL FOR VANITY MIRROR Thank you for buying the Hollywood Mirror, Read the manual in English For your safety and continued enjoyment of this product, always read the instruction book carefully before using. Website: www.HollywoodMirror.net, Email: [email protected] WBK-5846BT-12D Website: www.HollywoodMirror.net, Email: [email protected] Important Safety Instructions: These instructions are provided for your safety. It’s very important that they are read carefully and completely before assembly and installation of this vanity mirror. • INDOOR USE ONLY • Only use with supplied transformer & hardware. • Unplug the transformer from the power outlet when the product is not in use. • If any abnormal condition occurs, unplug the lighted mirror, allow it to cool, and return it to manufacturer for examination and repair. • Keep these instructions for future use. DANGER/WARNINGS: This is an electric product not a toy! To avoid risk of fire, burns, personal injury and electric shock, be sure to: • Handle with care! Never place upright on a hard surface when unpacked, like tile floor. Always lay it on soft surface. • Avoid placing it around metal objects such as keys, pocket change, paper clips, and jewelry. • Protect the unit and accessories from impacts, moisture, dirt, large temperature fluctuations and direct sunlight. • Do not spill liquid on the removed lamp unit or do not place it near any flammable object or where children can reach to prevent injuries or fire. • Never operate this mirror if it has a damaged cord or plug, if it is not working properly, if it has been dropped or otherwise damaged, or submersed in water. Return unit to manufacturer for examination and repair. PLEASE CAUTION: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG. Electricity and water are a dangerous combination. But did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged. Keep away from water and meltable materials. ALWAYS UNPLUG SMALL APPLIANCES! LIGHTING CONTROL --- Tap once to turn on the light, tap again to change lighting color (cool white, day light and warm yellow), then tap to turn off the light, long press to adjust brightness, BLUETOOTH SPEAKER: 1. Turn on: Press button to turn on Bluetooth Speaker, with a beep voice and the indicator light starts to flash quickly, the Bluetooth can be searched. 2. Bluetooth Connection: Turn on the Bluetooth of your phone and search for the device name of "K3030" to connect. Heard a beep voice and the light flash slowly, then the phone can sync to the Bluetooth Speaker to play music. 3. Bluetooth Adjustment: Tap or to play LAST or NEXT music. Long Press or to turn VOLUME DOWN or UP 4. Turn Off: Press turn off the Bluetooth Speaker function. LED Bulb Mirror Touch Switch Removable Base USB Outlet Last/Down Next/UP Bluetooth Light Switch Website: www.HollywoodMirror.net, Email: [email protected] Hollywood Mirror Constructions & Operations How to operate the Touch Switch? Website: www.HollywoodMirror.net, Email: [email protected] How to hang the Mirror on the wall? 1. Prepare the installation tools: tape measure, impact drill, screwdriver, hammer, vise. 2. Please make sure that the wall is a load-bearing wall that can withstand the weight of the mirror. 3. Installation steps: a) Screw those screws out of the base and separate the base from the mirror. b) Measure the distance between the two hanging holes behind the mirror. c) According to the measured distance, punch the hole with a percussion drill, the drilling depth is 5cm. d) Make sure the screws on the wall are strong enough to support the mirror, then carefully hang the Mirror against the screws on the wall. NOTE: INSTALLATION TOOLS & HANGING SCREWS ARE NOT INCLUED IN PACKAGE. Applicable ONLY for mirror model with hanging wall hole. Website: www.HollywoodMirror.net, Email: [email protected] How to replace the bulbs of the mirror? 1. Power off the mirror and unplug it, unscrew the back board of the mirror with Philips screwdriver; (Please bring your own knife and screwdriver.) 2. Disconnect the wire from the connector and unscrew the nut; 3. Use a utility knife to cut the sticker inside along the edge of the bulb, twist the bulb until it comes out; 4. Remove the sticker on the back side of the spare bulb, stick on the mirror after locating it on the hole; 5. Get the nut through the two wire of the spare bulb and tighten it; 6. Connect the wire with connector (Please ensure the connector is inserted with red wire on one side and blue wire on other side); 7. Install the back board. Scan the QR code on the left to view the instruction video on YouTube; Or open the YouTube link below in your browser to view the video. https://youtu.be/JLqlDuSVQ0U Contact us freely if you need Bulb Replacement Set compliant with our vanity mirrors. Bulb Replacement Set Mirror Size 580mm*460mm Input Voltage 100-240V 50/60HZ LED Type 12*1W LED Bulbs Color Tem 2700K-6000K Material Metal; Glass Color White, Silver, Rose Gold Length of Cable 1.5M Website: www.HollywoodMirror.net, Email: [email protected] Hollywood Mirror Specifications: CLEANING & MAINTENANCE: • Always unplug the mirror before cleaning. • Do not immerse the mirror in water or any other liquid when cleaning. • Do not use harsh or abrasive cleaners or furniture polish on mirror surface or any portion of the base. • Clean the mirror with any dry soft cloth. Slightly moisten cloth with water. A damp cloth holds dust, wipe sudden blot spills and prevents scratching. • Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary. STORAGE GUIDES: • If mirror is not in use, disconnect from electrical outlet. • BE SURE DIRECT SUNLIGHT WILL NOT STRIKE MIRROR WHEN LEFT UNATTENDED (reflected sunlight may cause fire). • …

Text truncated - open the document above for the full version.

Guangzhou Yinghua Technology Co., Ltd July 20, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AZLYWBK-5846BT-12D Model Number: WBK-5846BT-12D, WBK-5846BT-15D, WBK-4658BT, WBK- 6050BT, YBK-6050BT, WBK-7055BT, WBK-8060BT, WBK-10080BT To Whom It May Concern: We, The Guangzhou Yinghua Technology Co., Ltd hereby declare that the models are identical except the model names and the Size. Except for the different above, no other modification is performed. Sincerely, Signature: Guangzhou Yinghua Technology Co., Ltd Contact person: Weijun Luo

Guangzhou Yinghua Technology Co., Ltd Agent Authorization Company: Guangzhou Yinghua Technology Co., Ltd Address: No 8-16, Hua Lv Road, Zhong Nan Street, Li Wan District, Guangzhou, China Product Name: LED Makeup Mirror with Bluetooth Speaker Model Number(s): WBK-5846BT-12D, WBK-5846BT-15D, WBK-4658BT, WBK-6050BT, YBK-6050BT, WBK-7055BT, WBK-8060BT, WBK-10080BT Product Description: LED Makeup Mirror with Bluetooth Speaker We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-07-20 Name: Weijun Luo Company: Guangzhou Yinghua Technology Co., Ltd

Guangzhou Yinghua Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-07-16 Subject; Request for Confidentiality FCC ID: 2AZLYWBK-5846BT-12D To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Guangzhou Yinghua Technology Co., Ltd Contact person: Weijun Luo

External Photos ALL VIEW OF EUT OUTSIDE VIEW-1 OF EUT OUTSIDE VIEW-2 OF EUT OUTSIDE VIEW-3 OF EUT OUTSIDE VIEW-4 OF EUT OUTSIDE VIEW-5 OF EUT OUTSIDE VIEW-6 OF EUT PORT VIEW-1 OF EUT

FCC ID Label Location 40mm&50mm FCC ID: 2AZLYWBK-5846BT-12D

Internal Photos OPEN VIEW OF EUT INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT INTERNAL VIEW-6 OF EUT Antenna

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description LED Makeup Mirror with Bluetooth Speaker Model Name WBK-5846BT-12D Series Model WBK-5846BT-15D, WBK-4658BT, WBK-6050BT, YBK-6050BT, WBK-7055BT, WBK-8060BT, WBK-10080BT FCC ID 2AZLYWBK-5846BT-12D 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BLE P t =-3.895dBm=0.41mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.41mW /5mm) .[√2.402GHz)]=0.12<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. BR EDR P t =-1.457dBm=0.71mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.71mW /5mm) .[√2.402GHz)]=0.22<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

Report No.: AGC10712210401FE02 Page 44 of 52 CONDUCTED EMISSION TEST SETUP CONDUCTED TEST SETUP Report No.: AGC10712210401FE02 Page 45 of 52 APPENDIX B: PHOTOGRAPHS OF EUT ALL VIEW OF EUT OUTSIDE VIEW-1 OF EUT Report No.: AGC10712210401FE02 Page 46 of 52 OUTSIDE VIEW-2 OF EUT OUTSIDE VIEW-3 OF EUT Report No.: AGC10712210401FE02 Page 47 of 52 OUTSIDE VIEW-4 OF EUT OUTSIDE VIEW-5 OF EUT Report No.: AGC10712210401FE02 Page 48 of 52 OUTSIDE VIEW-6 OF EUT PORT VIEW-1 OF EUT Report No.: AGC10712210401FE02 Page 49 of 52 OPEN VIEW OF EUT INTERNAL VIEW-1 OF EUT Report No.: AGC10712210401FE02 Page 50 of 52 INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT Report No.: AGC10712210401FE02 Page 51 of 52 INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT Report No.: AGC10712210401FE02 Page 52 of 52 INTERNAL VIEW-6 OF EUT ----END OF REPORT---- Antenna Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. The non-CMA report issued by AGC is only permitted to be used by the client as internal reference use and shall not be used for public demonstration purpose. 5. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 6. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 7. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 8.Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 9. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 10. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.

Test Setup Photos RADIATED EMISSION TEST SETUP BELOW 1GHZ RADIATED EMISSION TEST SETUP ABOVE 1GHZ CONDUCTED EMISSION TEST SETUP CONDUCTED TEST SETUP