
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
°C°C warning statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Label position
Rev 11/20/07 AMERICAN WINDOWS & SHUTTERS, INC. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AZM7-DC3102 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Operational Description DC3102 Block Diagram DC3102 Schematics DC3102 Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name External Photos Internal Photos Setup photos Manual DC3102 External Photos DC3102 Internal Photos DC3102 Setup photos DC3102 Manual Number of days: 180 days Sincerely, (signature) (printed name) : Massimo Rigoni (date):17.06.2021
C:\Users\yu-au\Desktop\projects\open\704012136730-FCC-DC3102\documents\comments\DC3102 POA.docx AMERICAN WINDOWS & SHUTTERS, INC. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 6/9/2021 SUBJECT: FCC Application for FCC ID: 2AZM7-DC3102 To Whom It May Concern: We, the undersigned, hereby authorize Yu Anlu at TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Yu Anlu on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,
External Photos Documentation Manufacturer: AMERICAN WINDOWS & SHUTTERS, INC. Page 1 of 3 Product: Fifteen-channel transmitter FCC ID: 2AZM7-DC3102 External Photos Documentation Manufacturer: AMERICAN WINDOWS & SHUTTERS, INC. Page 2 of 3 Product: Fifteen-channel transmitter FCC ID: 2AZM7-DC3102 External Photos Documentation Manufacturer: AMERICAN WINDOWS & SHUTTERS, INC. Page 3 of 3 Product: Fifteen-channel transmitter FCC ID: 2AZM7-DC3102
W1735-3-04 A-01 2021.5.8 0.5# 亚银 W1735-3-04 W1735# 覆哑膜 校对 设计 适用产品 尺 寸 材 质 油 墨 印刷工艺 是否含流水码 或条形码 审定 版本 日期 制图 是否覆膜 颜 色 使用规范 备注: 工艺描述 客户号 杜亚机电 铭牌 JS-6-15 0.1±0.01mm(厚度)30x29mm(长*宽) DC3102 (英文) 方肖酉 魏娟 图纸认证说明 (此尺寸为本图内1:1尺寸) Caution! Do not ingest battery, Chemical Burn Hazard Model:DC3102 CR2430 3VDC Center frequency:433.92MHz 8 mm 6.6 mm 贴产品 贴小包 FCC ID2AZM7-DC3102 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 常规油墨 C:13 M:99 Y:100 K:0C:80 M:75 Y:69 K:43 彩色印刷 Fifteen-channel transmitter
Label & Location
Internal Photos Documentation Manufacturer: AMERICAN WINDOWS & SHUTTERS, INC. Page 1 of 2 Product: Fifteen-channel transmitter FCC ID: 2AZM7-DC3102 Antenna Internal Photos Documentation Manufacturer: AMERICAN WINDOWS & SHUTTERS, INC. Page 2 of 2 Product: Fifteen-channel transmitter FCC ID: 2AZM7-DC3102
Report Number: 709502136719-00 EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 19 Rev. 171.00 FCC- TEST REPORT Report Number : 708882136719-00 Date of Issue: June 28, 2021 Model : DC3102 Product Type : Fifteen-channel transmitter Applicant : AMERICAN WINDOWS & SHUTTERS, INC. Address : 11600 Adelmo Lane, Fort Myers, FL, United States 33966 Production Facility : Ningbo Dooya Mechanic & Electronic Technology Co., Ltd. Address : No. 168 Shengguang Road, Luotuo, Zhenhai, Ningbo, Zhengjiang province, P.R. China 315202 Test Result : ◼ Positive Negative Total pages including Appendices : 19 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. dc Report Number: 709502136719-00 EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 19 Rev. 171.00 1 Table of Contents 1 Table of Contents ................................................................................................................................................................... 2 2 Details about the Test Laboratory .......................................................................................................................................... 3 3 Description of the Equipment Under Test ............................................................................................................................. 4 4 Summary of Test Standards ................................................................................................................................................... 5 5 Summary of Test Results ....................................................................................................................................................... 6 6 General Remarks .................................................................................................................................................................... 7 7 Systems test configuration ..................................................................................................................................................... 8 8 Test Setups ............................................................................................................................................................................. 9 9 Test Methodology ................................................................................................................................................................ 10 9.1 Radiated Emission ....................................................................................................................................................... 10 9.2 Bandwidth Measurement ............................................................................................................................................ 16 9.3 Deactivation Time ....................................................................................................................................................... 17 10 Test Equipment List ............................................................................................................................................................. 18 11 System Measurement Uncertainty ....................................................................................................................................... 19 Report Number: 709502136719-00 EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 3 of 19 Rev. 171.00 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch No.16 Lane, 1951 Du Hui Road, Shanghai 201108, P.R. China FCC Registration Number: 820234 Telephone: +86 21 6141 0123 Fax: +86 21 6140 8600 Report Number: 709502136719-00 EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 4 of 19 Rev. 171.00 3 Description of the Equipment Under Test Product: Fifteen-channel transmitter Model no./HVIN: DC3102 FCC ID: 2AZM7-DC3102 Rating: 3VDC RF Transmission Frequency: 433.92MHz Modulation: ASK Antenna Type: PCB antenna Antenna Gain: -4dBi Description of the EUT: The Equipment Under Test (EUT) is a Fifteen-channel transmitter operated at 433.92MHz. Test sample no.: SHA-572450-3 Report Number: 709502136719-00 EMC_SHA_F_R_02.05E TÜV SÜD Certification and Testing (C…
Text truncated - open the document above for the full version.
Manufacturer: AMERICAN WINDOWS & SHUTTERS, INC. Product: Fifteen-channel transmitter FCC ID: 2AZM7-DC3102 ©2021 Not to be reproduced, except in its entirety, Page 1 of 2 without the Permission of TÜ V SÜ D Certification and Testing (China) Co., Ltd. Shanghai Branch PHOTOGRAPHS OF TEST SET UP Field Strength and Harmonics Test Setup Radiated Emission Setup 9kHz ~ 30MHz 30MHz ~ 1GHz Manufacturer: AMERICAN WINDOWS & SHUTTERS, INC. Product: Fifteen-channel transmitter FCC ID: 2AZM7-DC3102 ©2021 Not to be reproduced, except in its entirety, Page 2 of 2 without the Permission of TÜ V SÜ D Certification and Testing (China) Co., Ltd. Shanghai Branch 1GHz ~ 18GHz
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231 | 433.92 MHz - 433.92 MHz | - |
Single-channel transmitter
Equipment Class
DSC - Part 15 Security/Remote Control TransmitterSingle channel wireless waterproof transmitter
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Five-channel transmitter
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Single-channel transmitter
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter