2AZNT-HT1010 inches Rugged Android Tablet Device

Rugged Android Tablet Device Quick Start Guide Package Content •1 x HT10 •1 x Lithium Battery (10000mAh) •1 x Charger (5V/2A or 9V/2A) •1 x Type C USB Cable(1M) •1 x Quick Start Guide Front View/Side View OverviewOverviewInstallation The HT10 comes with a Lit hium battery in the packing box. 1. Make sure to use the battery provided with the HT10. Using a wrong battery may result in a risk of ex plosion. 2. Before installing the battery, make sure all the components are dry. Using wet components may cause damage not covered by the warranty. 1. Turn off the HT10. Move the battery cover lock buttons to the unlock position. 2. Gently pry off the battery cover from the grooves on the sides. -1--2--3- Rear View HT10 ⑯ ⑮ ⑰ ⑳ 21 2223 ⑱ ⑲ � Power Button �� USB Type-A � Volume Button �� USB Type-C � Scan Key �� Micro HDMI � Light sensor �� NFC � Charging LED �� LED Flash � Front Camera �� Rear Camera � Barcode Scanner Scan LED �� Battery Cover Lock � POGOPIN POGOPIN �� Speaker � MIC �� Battery Cover Lock �� TF/ Nano SIM Slots �� Battery �� �� �� Battery Cover Lock ① ② ③ ⑨ ⑩ ⑪ ⑫ ⑬ ⑥⑤ ④ ⑧ ⑦ ⑭ Charging Via a Computer 1. Open the TYPE-C cover on the right side of the HT10 to reveal the TYPE-C port. 2. Using the provided TYPE-C USB cable, connect the HT10 to your computer. Charging via AC Power 1. Open the TYPE-C cover on the right side of the HT10 to reveal the TYPE-C port. 2. Using the provided TYPE-C USB cable, connect the HT10 to the provided power charger. 3. Connect the power charger to charge the HT10. Using the battery and charger not provided with the HT10 may result in damage not covered by the warranty. Turning On/Off the HT10 1. To turn on the HT10, long press the Power key for 3 seconds. 2. To turn off the HT10, press the Power key for 1 second and then a power menu will pop up. Sleeping/Awakening Mode 1. When the screen is on, press the Power key to put the HT10 into sleep mode. 2. When the screen is off, press the Power key to wake up the HT10. Resetting If the system stops responding, long press the Power key for about 15 sec onds and release to reset the HT10. Power LED StatusLEDDescription Non- charging Flashing RedBattery power is below 15% No LEDBattery power is above 15% Flashing GreenIncoming call, message or notification Charging Solid RedBattery power is 0-89% Solid GreenBattery power is 90-100% Notice 1. Do not use or charge the device in dusty or damp places. Otherwise, the circ uit may not function properly. 2. Do not place the device near heater or other sources of heat. 3. Keep the ambient temperature between -10ºC~ 50ºC and relative humidity between 10%～90%RH for using the device. 4. Use only the charger and charging cable provided with the device. ChargingInstallationTurning On/Off Warranty Card Dear Customer: In order to receive warranty service, please keep the warranty card and present this warranty card if you require any warranty service. Customer Name: Product Model: Product Name: Date of Purchase: Warranty Period: 3. 4. 5. Insert the battery. Please insert the connector side first, and then press the battery down. 6. Replace the battery cover. Move the battery cover lock button to the lock position. -5--4- -6- Copyright Notice This document contains proprietary inf ormation protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Di sclaimer The inf ormation in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer. Under no circ umstances will the manufacturer be liable for any direct, indirect, special, incidental, or consequential damages arising from the use or inability to use the product or documentation, ev en if advised of the possibility of such damages. Open the cover Open the cover Locate the microSD and Nano SIM card holder on the side and insert the card. Push the card holder into the slot until it locks into place. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This Mobile Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of a…

Text truncated - open the document above for the full version.

ARBOR Technology Corp. Agent Authorization Letter 2022/6/23 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 伲，BuildingE, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.Ii [email protected]. cn to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the cu「rent date. Sincerely, 名:e� Clark Lian / manager Date/City: Phone: Fax: E-mail: 6/23/2022/ New Taipei City + 886282269396 +886-2-8226-9398 [email protected]. tw

ARBOR Technology Corp. Family models declaration letter. 6/23/2022 We Company: ARBOR Technology Corp. Address: I OF., No.700, Zhongzheng Rd., ZhongheDist., New Taipei City 235, Taiwan Product: 10" Rugged Android Tablet Device Model Name: HTIO Family Model: G1019, H79P, HT10A, HT10B, HT10C, HT10D, HT10E , HT10F , HT10G, HT10H, HT10J All models are the same circuitry and RF modules, except for memo「y size, silkscreen and exte「ior color Thanks Signature _ ／多�仁 Clark Lian / manager Date/City: Phone: Fax: E-mail: 6/22/2022/ New Taipei City +886282269396 +886-2-8226-9398 [email protected]. tw

ARBOR Technology Corp. Long Term Confidentiality Request Letter (23/06/2022} Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: C ONFIDENTIALITY REQUEST FOR Product: 1 O" Rugged Android Tablet Device Model No.: HT10, G1019, H79P, HT10A, HT10B, HT10C, HT10D, HT10E , HT10F , HT10G, HT10H, HT10J F CC ID: 2AZNT-HT10 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the • Schematic Diagram • Block Diagram • Operational Description • Parts List • Tune Up Procedure • Software Security Requirements for UNII devices Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measu「ementtest reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely , ＿ ，么互/ L--­ Clark Lian / manager Date/City: Phone: Fax: E-mail: 6/23/2022/ New Taipei City +886282269396 + 886-2-8226-9398 i [email protected]. tw

ARBOR Technology Corp. Short Term Confidentiality Request Letter (23/06/2022) Eurofins Electrical and Electronic Testing NA , Inc. 9 14 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: 1 O" Rugged Android Tablet Device Model N o.: HT10, G1019, H79P, HT10A, HT10B, HT10C, HT10D, HT10E , HT10F , HT10G, HT10H, HT10J F CC ID: 2AZNT-HT10 To Whom It May Concern: In acco「dance with sections 0.457 and 0.459 of CFR 47, < ARBOR Technology Corp. > . requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos Internal photos User's manual T hese documents contain detailed system and equipment descriptions and related information about t he product, which < ARBOR Technology Corp. > conside「s to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < ARBOR Technology Corp. > feels that this information would be of benefit to its competitors, and t hat the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, 孕/ lark Lian / manager Date/City: Phone: Fax: E-mail: 6/23/2022/ New Taipei City +886282269396 +886-2-8226-9398 [email protected]. tw

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8

104*45mm label location This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Photo 9 Photo 10 Photo 11 Photo 12 NFC ANT BT/WIFI ANT 2/3/4G Main ANT 4G AUX ANT Photo 13 Photo 14 GPS ANT Photo 15 Photo 16 Photo 17 Photo 18 Photo 19 Photo 20 Photo 21 Photo 22

Report No.: S22030700909001 Version.1.3 Page 1 of 83 RADIO TEST REPORT FCC ID: 2AZNT-HT10 Product: 10" Rugged Android Tablet Device Trade Mark: ARBOR Model No.: HT10 Family Model: G1019, H79P, HT10A, HT10B, HT10C, HT10D, HT10E , HT10F , HT10G, HT10H, HT10J Report No.: S22030700909001 Issue Date: Jun 06. 2022 Prepared for ARBOR Technology Corp. 10F., No.700, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S22030700909001 Version.1.3 Page 2 of 83 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 NUMBER OF HOPPING CHANNEL ........................................................................................................... 25 7.4 HOPPING CHANNEL SEPARATION MEASUREMENT ........................................................................... 26 7.5 AVERAGE TIME OF OCCUPANCY (DWELL TIME) ................................................................................ 27 7.6 20DB BANDWIDTH TEST .......................................................................................................................... 29 7.7 PEAK OUTPUT POWER .............................................................................................................................. 30 7.8 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.9 SPURIOUS RF CONDUCTED EMISSION .................................................................................................. 32 7.10 ANTENNA APPLICATION .......................................................................................................................... 33 7.11 FREQUENCY HOPPING SYSTEM (FHSS) EQUIPMENT REQUIREMENTS .............................................. 34 8 TEST RESULTS ................................................................................................................................................... 35 8.1 DWELL TIME ................................................................................................................................................... 35 8.2 MAXIMUM CONDUCTED OUTPUT POWER ....................................................................................................... 40 8.3 OCCUPIED CHANNEL BANDWIDTH .................................................................................................................. 45 8.4 CARRIER FREQUENCIES SEPARATION .............................................................................................................. 55 8.5 NUMBER OF HOPPING CHANNEL ..................................................................................................................... 60 8.6 BAND EDGE .................................................................................................................................................... 61 8.7 CONDUCTED RF SPURIOUS EMISSION ............................................................................................................. 74 Report No.: S22030700909001 Version.1.3 Page 3 of 83 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : ARBOR Technology Corp. Address ........................................ : 10F., No.700, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan Manufacturer's Name .................. : ARBOR Technology Corp. Address ........................................ : 10F., No.700, Zhongzheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan Product description Product name .............................. : 10" Rugged Android Tablet Device Model and/or type reference ...... : HT10 Family Model .....................…

Text truncated - open the document above for the full version.

Report No.: S22030700909001 Version.1.3 Page 61 of 83 8.6 BAND EDGE Condition Mode Frequency (MHz) Antenna Hopping Mode Max Value (dBc) Limit (dBc) Verdict NVNT 1-DH5 2402 Ant 1 No-Hopping -47.73 -20 Pass NVNT 1-DH5 2402 Ant 1 Hopping -47.89 -20 Pass NVNT 1-DH5 2480 Ant 1 No-Hopping -53.19 -20 Pass NVNT 1-DH5 2480 Ant 1 Hopping -48.15 -20 Pass NVNT 2-DH5 2402 Ant 1 No-Hopping -45.38 -20 Pass NVNT 2-DH5 2402 Ant 1 Hopping -47.87 -20 Pass NVNT 2-DH5 2480 Ant 1 No-Hopping -47.41 -20 Pass NVNT 2-DH5 2480 Ant 1 Hopping -49.64 -20 Pass NVNT 3-DH5 2402 Ant 1 No-Hopping -46.93 -20 Pass NVNT 3-DH5 2402 Ant 1 Hopping -47.81 -20 Pass NVNT 3-DH5 2480 Ant 1 No-Hopping -48.07 -20 Pass NVNT 3-DH5 2480 Ant 1 Hopping -48.92 -20 Pass Band Edge NVNT 1-DH5 2402MHz Ant1 No-Hopping Ref Report No.: S22030700909001 Version.1.3 Page 62 of 83 Band Edge NVNT 1-DH5 2402MHz Ant1 No-Hopping Emission Band Edge(Hopping) NVNT 1-DH5 2402MHz Ant1 Hopping Ref Report No.: S22030700909001 Version.1.3 Page 63 of 83 Band Edge(Hopping) NVNT 1-DH5 2402MHz Ant1 Hopping Emission Band Edge NVNT 1-DH5 2480MHz Ant1 No-Hopping Ref Report No.: S22030700909001 Version.1.3 Page 64 of 83 Band Edge NVNT 1-DH5 2480MHz Ant1 No-Hopping Emission Band Edge(Hopping) NVNT 1-DH5 2480MHz Ant1 Hopping Ref Report No.: S22030700909001 Version.1.3 Page 65 of 83 Band Edge(Hopping) NVNT 1-DH5 2480MHz Ant1 Hopping Emission Band Edge NVNT 2-DH5 2402MHz Ant1 No-Hopping Ref Report No.: S22030700909001 Version.1.3 Page 66 of 83 Band Edge NVNT 2-DH5 2402MHz Ant1 No-Hopping Emission Band Edge(Hopping) NVNT 2-DH5 2402MHz Ant1 Hopping Ref Report No.: S22030700909001 Version.1.3 Page 67 of 83 Band Edge(Hopping) NVNT 2-DH5 2402MHz Ant1 Hopping Emission Band Edge NVNT 2-DH5 2480MHz Ant1 No-Hopping Ref Report No.: S22030700909001 Version.1.3 Page 68 of 83 Band Edge NVNT 2-DH5 2480MHz Ant1 No-Hopping Emission Band Edge(Hopping) NVNT 2-DH5 2480MHz Ant1 Hopping Ref Report No.: S22030700909001 Version.1.3 Page 69 of 83 Band Edge(Hopping) NVNT 2-DH5 2480MHz Ant1 Hopping Emission Band Edge NVNT 3-DH5 2402MHz Ant1 No-Hopping Ref Report No.: S22030700909001 Version.1.3 Page 70 of 83 Band Edge NVNT 3-DH5 2402MHz Ant1 No-Hopping Emission Band Edge(Hopping) NVNT 3-DH5 2402MHz Ant1 Hopping Ref Report No.: S22030700909001 Version.1.3 Page 71 of 83 Band Edge(Hopping) NVNT 3-DH5 2402MHz Ant1 Hopping Emission Band Edge NVNT 3-DH5 2480MHz Ant1 No-Hopping Ref Report No.: S22030700909001 Version.1.3 Page 72 of 83 Band Edge NVNT 3-DH5 2480MHz Ant1 No-Hopping Emission Band Edge(Hopping) NVNT 3-DH5 2480MHz Ant1 Hopping Ref Report No.: S22030700909001 Version.1.3 Page 73 of 83 Band Edge(Hopping) NVNT 3-DH5 2480MHz Ant1 Hopping Emission Report No.: S22030700909001 Version.1.3 Page 74 of 83 8.7 CONDUCTED RF SPURIOUS EMISSION Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT 1-DH5 2402 Ant 1 -61.48 -20 Pass NVNT 1-DH5 2441 Ant 1 -63.6 -20 Pass NVNT 1-DH5 2480 Ant 1 -65.81 -20 Pass NVNT 2-DH5 2402 Ant 1 -59.09 -20 Pass NVNT 2-DH5 2441 Ant 1 -61.75 -20 Pass NVNT 2-DH5 2480 Ant 1 -59.87 -20 Pass NVNT 3-DH5 2402 Ant 1 -49.21 -20 Pass NVNT 3-DH5 2441 Ant 1 -51.32 -20 Pass NVNT 3-DH5 2480 Ant 1 -58.51 -20 Pass Tx. Spurious NVNT 1-DH5 2402MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 75 of 83 Tx. Spurious NVNT 1-DH5 2402MHz Ant1 Emission Tx. Spurious NVNT 1-DH5 2441MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 76 of 83 Tx. Spurious NVNT 1-DH5 2441MHz Ant1 Emission Tx. Spurious NVNT 1-DH5 2480MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 77 of 83 Tx. Spurious NVNT 1-DH5 2480MHz Ant1 Emission Tx. Spurious NVNT 2-DH5 2402MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 78 of 83 Tx. Spurious NVNT 2-DH5 2402MHz Ant1 Emission Tx. Spurious NVNT 2-DH5 2441MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 79 of 83 Tx. Spurious NVNT 2-DH5 2441MHz Ant1 Emission Tx. Spurious NVNT 2-DH5 2480MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 80 of 83 Tx. Spurious NVNT 2-DH5 2480MHz Ant1 Emission Tx. Spurious NVNT 3-DH5 2402MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 81 of 83 Tx. Spurious NVNT 3-DH5 2402MHz Ant1 Emission Tx. Spurious NVNT 3-DH5 2441MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 82 of 83 Tx. Spurious NVNT 3-DH5 2441MHz Ant1 Emission Tx. Spurious NVNT 3-DH5 2480MHz Ant1 Ref Report No.: S22030700909001 Version.1.3 Page 83 of 83 Tx. Spurious NVNT 3-DH5 2480MHz Ant1 Emission END OF REPORT

Radiated Measurement Photos Conducted Measurement Photos