2AZO6MI-3021Outdoor Bullet Cam

Outdoor Bullet Cam Quick Guide MI-3021 Warning FCC This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiveris connected. -- Consult the dealer or an experienced radio/TV technician for help. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter. FCC ID: 2AZO6MI-3021 CE RED This product can be used across EU member states. RF Specification: EU Declaration of Conformity We, Shenzhen Baishihao Electronic Technology Co., Ltd. (Room 202, No. 6, 5th Alley, Xiangjiaotang New Village, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen District,Shenzhen,China,518057) hereby declares that this Outdoor Bullet Cam is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. According to Article 10(2) of Directive 2014/53/EU, the Outdoor Bullet Cam can be used in Europe without restriction. Warning: 1. Adapter shall be installed near the equipment and shall be easily accessible. 2. Operation temperature:-10~50. 3. The plug considered as disconnect device of adapter. 4. Accessories information: Adapter JF012WR-1200100VH Input: 100-240V~50/60Hz 0.35A Output: 12V1.0A We, According to Article 10(2) of Directive 2014/53/EU, the MI-3021 can be used in Europe without restriction. The full text of the EU declaration DOC is available at the following: Visit the Web site https://www.mpwsafe.com Function Max RF Output Power LimitOperation Frequency Wi-Fi 13.75 dBm 20 dBm 802.11b/g/n(20MHz): 2412~2472MHz; 802.11n(40MHz):2422~246 2MHzt P. 1 P. 2 P. 3 P. 4 P. 5 P . 6-10 P . 11 P . 12 Catalogue 1. What’s In The Box 2. Camera Structure 3. Insert Micro SD Card 4. Read Before Installing 5. Set Up With SafeMiraie App 6. Installation 7. Status Light 8. Protect Plan What’s In The Box Quick Guide Drilling Template X 3 X 3 Mounting Screws Anchors Outdoor Bullet Cam Power Adapter Weatherproof Tube Outdoor Bullet Cam Your property guardian at day and night 1 Infrared LEDs Antenna Light Sensor Lens Wi-Fi Configuration Button Ethernet Cable Port Power Port Status Light Speaker Microphone Micro SD Card Slot Camera Structure 2 Insert Micro SD Card This camera comes with a built-in card slot which supports up to 128GB Micro SD card. Once you insert the storage card, the camera will automatically start to record and store videos on the storage card. You can view those videos in the ‘Replay’ page by clicking the ‘Replay’ button in the ‘Homepage’. Step 1: Loosen the screws. Take off the cover gently since wires are attaching to it. Step 2: Insert Micro SD card. Make sure you insert it in the correct direction. Step 3: Put the cover back and tighten the screws. 3 Micro SD Card Slot 1 3 2 1. Keep the Outdoor Bullet Cam and all accessories out of reach of children and pets. 2. Power supply voltage that is required to operate Outdoor Bullet Cam should be DC12V (≥1000mA). 3. The product can only be used in proper temperature and humidity: Operating temperature: -10°C - 50°C (14°F-122°F) Operating humidity: 0-95%. 4. Please do not expose the camera lens to direct sunlight. 5. Please do not install the camera to the place that is likely struck by lightning. Read Before Installing Note: 1. This camera only works with 2.4GHz Wi-Fi. 2. Strong lights may interfere with the ability to scan the QR code. 3. Avoid placing the device behind furniture or near microwaves. Try to keep it within range of your Wi-Fi signal. 4 Set Up with SafeMiraie App Download the SafeMiraie App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process. 5 Check following things before you starting to drill holes on your wall: 1. This camera has been successfully added to your Safemiraie App and is able to stream video. 2. Have planned the cable route. Measured the length of the power cable and ethernet cable (if you plan to use ethernet connection) you will need. Installation Step 1: Find a good installation spot. We recommend installing the Outdoor Bullet Cam just 7-10 feet (2-3 meter) above the ground for a better two-way audio experience. There is a power outlet nearby. Test whether Outdoor Bullet Cam can stream video smoothly at the spot. Make sure nothing blocks the camera’s sight. 6 Step 2: Before you start to drill, make sure you know the locations of wall-in pipes and electrical wires. (If you are not comfortable with drilling holes, please consult with a licensed electrician) ①Use the provided drilling template to mark th…

Text truncated - open the document above for the full version.

Shenzhen Baishihao Electronic Technology Co., Ltd. Agent Authorization Company: Shenzhen Baishihao Electronic Technology Co., Ltd. Address: Room 202, No. 6, 5th Alley, Xiangjiaotang New Village, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen District,Shenzhen,China,518057 Product Name: Outdoor Bullet Cam Model Number(s): MI-3021, MI-3020, MI-3022, MI-3023, MI-3024, MI-3025, MI- 3026, MI-3027, MI-3028, MI-3029 Product Description: Outdoor Bullet Cam We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021/07/19 Name: guanghan. fang Title: Manager Company: Shenzhen Baishihao Electronic Technology Co., Ltd.

Shenzhen Baishihao Electronic Technology Co., Ltd. Family models declaration letter. We Shenzhen Baishihao Electronic Technology Co., Ltd. Of Room 202, No. 6, 5th Alley, Xiangjiaotang New Village, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen District, Shenzhen,China,518057 Product: Outdoor Bullet Cam Model Name: MI-3021, MI-3020, MI-3022, MI-3023, MI-3024, MI-3025, MI-3026, MI-3027, MI-3028, MI-3029 Trade mark: MPW All models are the same circuit and RF module, except the Model name. For trading purpose. Thanks Sincerely, Signature 2021-07-19 guanghan. fang /general manager E-mail: [email protected] Phone: 0755-61156566

Shenzhen Baishihao Electronic Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021/07/19 Subject; Request for Confidentiality FCC ID: 2AZO6MI-3021 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: guanghan. fang Title: Manager Email: [email protected]

S21042300405 Model: MI-3021 Photo 1 Photo 2 S21042300405 Model: MI-3021 Photo 3 Photo 4 S21042300405 Model: MI-3021 Photo 5 Photo 6 S21042300405 Model: MI-3021 Photo 7 Photo 8 S21042300405 Model: MI-3021 Photo 9 Photo 10

Outdoor Bullet Cam DC 12V/1A MI-3021 FCC ID:2AZO6MI-3021 ID:4061511230100001

S21042300405 Model: MI-3021 Photo 1 Photo 2 Antenna S21042300405 Model: MI-3021 Photo 3 Photo 4 S21042300405 Model: MI-3021 Photo 5 Photo 6 S21042300405 Model: MI-3021 Photo 7 Photo 8 S21042300405 Model: MI-3021 Photo 9 Photo 10 S21042300405 Model: MI-3021 Photo 11 Photo 12 S21042300405 Model: MI-3021 Photo 13 Photo 14 S21042300405 Model: MI-3021 Photo 15

FCC ID: 2AZO6MI-3021 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method E (V/m) ＝ d GP**30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 *377 **30 D GP From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Measurement Result Operation Frequency: 2412-2462MHz for 802.11b/g/11n; Power density limited: 1mW/ cm 2 Antenna Type: External Antenna Antenna gain: 2 dBi R=20cm WIFI: conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 241212.9 12±113 19.9532.001.580.00631 243711.55 12±113 19.9532.001.580.00631 246211.88 12±113 19.9532.001.580.00631 241213.8 13±114 25.1192.001.580.00791 243712.42 13±114 25.1192.001.580.00791 246213.39 13±114 25.1192.001.580.00791 241212.98 12±113 19.9532.001.580.00631 243712.3 12±113 19.9532.001.580.00631 246212.28 12±113 19.9532.001.580.00631 242211.61 12±113 19.9532.001.580.00631 243711.1 12±113 19.9532.001.580.00631 245211.28 12±113 19.9532.001.580.00631 (mW/cm2) Antenna Gain Max tune-up power 802.11n HT20 802.11n HT40 (mW/cm2 ) Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 802.11b 802.11g Conclusion: For the max result : 0.0079≤ 1.0 for Max Power Density, compliance RF exposure. Signature: Date: 2021-07-19 NAME AND TITLE (Please print or type): Alex li /Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Report No.: S21042300405001 Version.1.3 Page 1 of 71 FCC RADIO TEST REPORT FCC ID: 2AZO6MI-3021 Product: Outdoor Bullet Cam Trade Mark: MPW Model No.: MI-3021 Family Model: MI-3020,MI-3022,MI-3023,MI-3024,MI-3025, MI-3026,MI-3027,MI-3028,MI-3029 Report No.: S21042600204001 Issue Date: June 02. 2021 Prepared for Shenzhen Baishihao Electronic Technology Co., Ltd. Room 202, No. 6, 5th Alley, Xiangjiaotang New Village, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen District,Shenzhen,China,518057 Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China Tel:400-800-6106,0755-2320 0050 / 2320 0090 Website: http://www.ntek.org.cn Report No.: S21042300405001 Version.1.3 Page 2 of 71 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.3 6DB BANDWIDTH ....................................................................................................................................... 27 7.4 DUTY CYCLE ............................................................................................................................................... 28 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 30 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 31 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 32 7.8 SPURIOUS RF CONDUCTED EMISSIONS................................................................................................ 33 7.9 ANTENNA APPLICATION .......................................................................................................................... 34 8 TEST RESULT ..................................................................................................................................................... 35 8.1 MAXIMUM CONDUCTED OUTPUT POWER........................................................................................... 35 8.2 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 36 8.3 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 43 8.4 BAND EDGE ................................................................................................................................................. 50 8.5 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 59 Report No.: S21042300405001 Version.1.3 Page 3 of 71 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Shenzhen Baishihao Electronic Technology Co., Ltd. Address ....................................... : Room 202, No. 6, 5th Alley, Xiangjiaotang New Village, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen District,Shenzhen,China,518057 Manufacturer's Name .................. : Shenzhen Baishihao Electronic Technology Co., Ltd. Address ....................................... : Room 202, No. 6, 5th Alley, Xiangjiaotang New Village, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen District,Shenzhen,China,518057 Product description Product name .............................. : Outdoor Bullet Cam Model and/or type reference ..... : MI-3021 Family Model ............................... : MI-3020,MI-3022,MI-3023,MI-3024,MI-3025, MI-3026,MI-3027,MI-3028,MI-3029 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 M…

Text truncated - open the document above for the full version.

Radiated Measurement Photos Conducted Measurement Photos